Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interface defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Investigation of Strain in AlGaN/GaN Multi Quantum Wells by Complementary Techniques

Al{sub 0.49}Ga{sub 0.51}N(12 nm)/GaN (13 nm) Multi Quantum Wells of 15 periods are grown on sapphire by MOCVD technique. GaN/AlN, each of thickness 200 nm and 20 nm respectively, are used as buffer layers between substrate and epilayer to incorporate the strain in epilayers. It is a well established technique to engineer the band gap in Al{sub x}Ga{sub 1-x}N by adjusting alloy composition. These samples are used in visible and UV light emitters. In the present study, we employ a photoluminescence technique to estimate the composition and luminescence peak positions of AlGaN and GaN. Crystallinity and quality of interfaces have been studied by Rocking curve scan. The Threading Dislocations formed at the GaN buffer layer travel across the entire layers to the surface to form good quality films. Photo-luminescence results show a very sharp GaN peak at 3.4 eV, as observed and reported by others, which shows that samples are free from point defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dislocation strain as the mechanism of phonon scattering at grain boundaries

Thermal conductivities of polycrystalline thermoelectric materials are satisfactorily calculated by replacing the commonly used Casimir model (freqeuncy-independent) with grain boundary dislocation strain model (frequency-dependent) of Klemens. It is demonstrated that the grain boundaries are better described as a collection of dislocations rather than perfectly scattering interfaces.

36 MATERIALS SCIENCE↗

Nonlinear Impedance Analysis of La 0.4 Sr 0.6 Co 0.2 Fe 0.8 O 3-δ Thin Film Oxygen Electrodes

Here, linear and nonlinear electrochemical impedance spectroscopy (EIS, NLEIS) were used to study 20 nm thin film La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF-6428) electrodes at 600°C in oxygen environments. LSCF films were epitaxially deposited on single crystal yttria-stabilized zirconia (YSZ) with a 5 nm gadolinium-doped ceria (GDC) protective interlayer. Impedance measurements reveal an oxygen storage capacity similar to independent thermogravimetry measurements on semi-porous pellets. However, the impedance data fail to obey a homogeneous semiconductor point-defect model. Two consistent scenarios were considered: a homogeneous film with non-ideal thermodynamics (constrained by thermogravimetry measurements), or an inhomogeneous film (constrained by a semiconductor point-defect model with a Sr maldistribution). The latter interpretation suggests that gradients in Sr composition would have to extend beyond the space-charge region of the gas-electrode interface. While there is growing evidence supporting an equilibrium Sr segregation at the LSCF surface monolayer, a long-range, non-equilibrium Sr stratification caused by electrode processing conditions offers a possible explanation for the large volume of highly reducible LSCF. Additionally, all thin films exhibited fluctuations in both linear and nonlinear impedance over the hundred-hour measurement period. This behavior is inconsistent with changes solely in the surface rate coefficient and possibly caused by variations in the surface thermodynamics over exposure time.

36 MATERIALS SCIENCE↗

Fabrication of engineered dopant profiles in Er/Lu:YAG transparent laser ceramics via additive manufacturing

Transparent ceramic Er:YAG laser rods were fabricated via the direct ink write (DIW) method with engineered doping profiles featuring an Er-doped core with endcaps and core-clad structures. Laser rods up to 11 cm in length were produced which required development of a scalable process. To achieve this, multiple improvements were implemented, including printing the rods horizontally on a substrate, rather than vertically, eliminating the need for an external support structure and using a sacrificial drying layer to mitigate warping and defects. Highly transparent rods were achieved with optical scatter levels as low as 0.5%/cm (at 543 nm). A small refractive index difference of 5.7 ppm was measured at the interface between the Er-doped core and the Lu-doped endcaps and cladding. These results demonstrate DIW as a straightforward method for making good optical quality laser rods with engineered doping profiles to improve laser performance.

36 MATERIALS SCIENCE↗

Different Radiation Tolerances of Ultrafine-Grained Zirconia–Magnesia Composite Ceramics with Different Grain Sizes

Developing high-radiation-tolerant inert matrix fuel (IMF) with a long lifetime is important for advanced fission nuclear systems. In this work, we combined zirconia (ZrO 2 ) with magnesia (M g O) to form ultrafine-grained ZrO 2 –M g O composite ceramics. On the one hand, the formation of phase interfaces can stabilize the structure of ZrO 2 as well as inhibiting excessive coarsening of grains. On the other hand, the grain refinement of the composite ceramics can increase the defect sinks. Two kinds of composite ceramics with different grain sizes were prepared by spark plasma sintering (SPS), and their radiation damage behaviors were evaluated by helium (He) and xenon (Xe) ion irradiation. It was found that these dual-phase composite ceramics had better radiation tolerance than the pure yttria-stabilized ZrO 2 (YSZ) and M g O. Regarding He+ ion irradiation with low displacement damage, the ZrO 2 –M g composite ceramic with smaller grain size had a better ability to manage He bubbles than the composite ceramic with larger grain size. However, the ZrO 2 –M g composite ceramic with a larger grain size could withstand higher displacement damage in the phase transformation under heavy ion irradiation. Therefore, the balance in managing He bubbles and phase stability should be considered in choosing suitable grain sizes.

Materials Science↗

Effects of Oxygen-Containing Functional Groups on Supercapacitor Performance

Molecular dynamics (MD) simulations of the interface between graphene and the ionic liquid 1-butyl-3-methylimidazolium trifluoromethanesulfonate (BMIM OTf) were carried out to gain molecular-level insights into the performance of graphene-based supercapacitors and, in particular, determine the effects of the presence of oxygen-containing defects at the graphene surface on their integral capacitance. The MD simulations predict that increasing the surface coverage of hydroxyl groups negatively affects the integral capacitance, whereas the effect of the presence of epoxy groups is much less significant. The calculated variations in capacitance are found to be directly correlated to the interfacial structure. Indeed, hydrogen bonding between hydroxyl groups and SO3 anion moieties prevents BMIM+ and OTf- molecules from interacting favorably in the dense interfacial layer and restrains the orientation and mobility of OTf- ions, thereby reducing the permittivity of the ionic liquid at the interface. The results of the molecular simulations can facilitate the rational design of electrode materials for supercapacitors.

Environmental Molecular Sciences Laboratory↗

In-plane and out-of-plane defectivity in thin films of lamellar block copolymers

We investigate the ordering of poly(styrene-b-methyl methacrylate) (PS-PMMA) lamellar copolymers (periodicity L 0 = 46 nm) confined between a free surface and brushed poly(styrene-r-methyl methacrylate) silicon substrate. The processing temperature was selected to eliminate wetting layers at the top and bottom interfaces, producing approximately neutral boundaries that stabilize perpendicular domain orientations. The PS-PMMA film thickness (t = 0.5L 0 –2.5L 0 ) and brush grafting density (Σ = 0.2–0.6 nm –2 ) were systematically varied to examine their impacts on in-plane and out-of-plane ordering. Samples were characterized with a combination of high-resolution microscopy, X-ray reflectivity, and grazing-incidence small-angle X-ray scattering. In-plane order at the top of the film (quantified through calculation of orientational correlation lengths) improved with t n , where the exponent n increased from 0.75 to 1 as Σ decreased from 0.6 to 0.2 nm –2 . Out-of-plane defects such as tilted domains were detected in all films, and the distribution of domain tilt angles was nearly independent of t and Σ. These studies demonstrate that defectivity in perpendicular lamellar phases is three-dimensional, comprised of in-plane topological defects and out-of-plane domain tilt, with little or no correlation between these two types of disorder. As a result, strong interactions between the block copolymer and underlying substrate may trap both kinds of thermally generated defects.

36 MATERIALS SCIENCE↗

Autocatalytic Surface Hydroxylation of MgO(100) Terrace Sites Observed Under Ambient Conditions

We have investigated the reaction of water vapor with the MgO(100) surface using ambient pressure X-ray photoelectron spectroscopy (AP-XPS), which permits the study of the chemical composition of the MgO/water vapor interface at p(H{sub 2}O) in the Torr range. Water dissociation on thin MgO(100) films of 4-5.5 monolayers (ML) grown on Ag(100) was studied under isobaric conditions at p(H{sub 2}O) ranging from 0.005 to 0.5 Torr and temperatures from 380 to -10 C, up to a maximum relative humidity (RH) of 20%. At RH < 0.01% dissociative adsorption occurs only at defect sites (0.08 ML), while terrace sites remain unreactive toward water dissociation. In the range 0.01 < RH < 0.1% there is an abrupt onset of dissociative adsorption at terrace sites which saturates at 1 ML at 0.1% RH, and is accompanied by an increase in molecular water adsorption. At 20% RH there is 1 ML of molecularly adsorbed water interacting with a fully hydroxylated interface on MgO(100). The observed onset of hydroxylation near 0.01% RH is suggested to be due to water molecules aggregating at the surface, leading to an autocatalytic dissociation of water at MgO(100) terrace sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A microstructural approach toward the effect of thickness on semiconductor-to-metal transition characteristics of VO{sub 2} epilayers

We report the control of semiconductor to metal transition in VO{sub 2}(010) epilayers integrated with Si(100) substrates buffered with an NiO[111]/YSZ[100] intermediate layer. VO{sub 2} epitaxial thin films were grown at different thicknesses varying from 10 to 200 nm using pulsed laser deposition technique. An epitaxial relationship of VO{sub 2}(010)‖NiO(111)‖ YSZ(001)‖Si(001) and VO{sub 2}[100]‖NiO[110]‖ YSZ[100]‖Si[100] was established at room temperature. The crystallographic alignment across the VO{sub 2}/NiO interface changes to VO{sub 2}(100)‖NiO(111) and VO{sub 2}[001]‖NiO[110] at the temperature of growth giving rise to a misfit strain of about 33.5% and 3.0% along two orthogonal in-plane orientations. The transition temperature was observed to vary from about 353 to 341 K, the transition amplitude increased by about five orders of magnitude, and the hysteresis decreased to about 3 K, as the thickness of VO{sub 2} layers increased from about 10 to 200 nm. These observations were explained based on strain characteristics, overall defect content and grain boundaries, and phenomenological thermodynamic models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Terahertz Nanoimaging of Perovskite Solar Cell Materials

Direct visualization and quantitative evaluation of charge filling in grain boundary (GB) traps of hybrid metal halide perovskites require dynamic conductivity imaging simultaneously at the terahertz (THz) frequency and nanometer (nm) spatial scales not accessible by conventional transport and imaging methods used thus far. Here, in this study, we apply a THz near-field nanoconductivity mapping to the archetypal metal halide perovskite photovoltaic films and demonstrate that it is a powerful tool to reveal distinct dielectric heterogeneity due to charge trapping and degradation at the single GB level. Our approach visualizes the filled defect ion traps by local THz charge conductivity and allows for extracting a quantitative profile of trapping density in the vicinity of GBs with sub-20 nm resolution. Furthermore, imaging material degradation by tracking local nanodefect distributions overtime identifies a distinct degradation pathway that starts from the GBs and propagates inside the grains over time. The single GB, nano-THz conductivity imaging demonstrated here can be extended to benchmark various perovskite materials and devices for their global photoenergy conversion performance and local charge transfer proprieties of absorbers and interfaces.

14 SOLAR ENERGY↗

Microstructure prediction for Ti-22Al-25Nb in laser powder bed fusion

This work presents a physics-informed framework for predicting solidification morphology and defect susceptibility in additively manufactured Ti–22Al–25Nb across a broad processing space. The framework integrates solidification microstructure selection (SMS) analysis with a single-track defect-based printability map to establish a unified methodology linking processing parameters to both interfacial morphology and manufacturability. Thermal gradients G and solidification rates R are first computed using the Thermo-Calc Additive Manufacturing (TC-AM) module, a finite-interface-dissipation (FID) phase-field (PF) model coupled with CALPHAD method is then employed to systematically distinguish planar and dendritic regimes as functions of $G$ and $R$. By superimposing the printability map onto the morphology projections, a comprehensive process–structure framework is obtained. Across most processing conditions, the predicted microstructure is predominantly dendritic, while planar growth emerges only under selected laser power $P$ and scan speed $v$ combinations. In addition to morphology classification, the framework quantifies the dendritic area fraction and introduces a width-based morphology descriptor to characterize the spatial extent of planar/dendritic regions within the melt pool. It provides mechanistic insight into the interplay between solidification physics and defect formation, offering practical guidance for parameter selection and microstructural control in Ti–22Al–25Nb additive manufacturing (AM).

36 MATERIALS SCIENCE↗

Metrology and Failure Analysis for 3D IC Integration

At the same time as research in 3D TSV technology is advancing quickly, the analytical techniques used in the evaluation of 3D stacks must also advance in capability. Microscopy techniques for which silicon is opaque such as scanning acoustic microscopy (SAM) and confocal infrared (IR) microscopy are capable of inspecting the interface between bonded wafer pairs, while high resolution X-ray computed tomography (XCT) is used to detect voids in TSVs. With nano-XCT, voids in copper TSVs with sub-100 nm size can be visualized. For more detailed failure characterization, a target Focused Ion Beam (FIB) cross-section through the localized region of interest (defect) and subsequent scanning electron microscopy (SEM) imaging is proposed. Currently, the most important requirement is to reduce the so-called time-to-data, e. g. for defect localization using nano-XCT and for cross-section characterization.

36 MATERIALS SCIENCE↗

Structure of the FANCI-FANCD2 Complex: Insights into the Fanconi Anemia DNA Repair Pathway

Fanconi anemia is a cancer predisposition syndrome caused by defects in the repair of DNA interstrand cross-links (ICLs). Central to this pathway is the Fanconi anemia I-Fanconi anemia D2 (FANCI-FANCD2) (ID) complex, which is activated by DNA damage-induced phosphorylation and monoubiquitination. The 3.4 angstrom crystal structure of the {approx}300 kilodalton ID complex reveals that monoubiquitination and regulatory phosphorylation sites map to the I-D interface, suggesting that they occur on monomeric proteins or an opened-up complex and that they may serve to stabilize I-D heterodimerization. The 7.8 angstrom electron-density map of FANCI-DNA crystals and in vitro data show that each protein has binding sites for both single- and double-stranded DNA, suggesting that the ID complex recognizes DNA structures that result from the encounter of replication forks with an ICL.

59 BASIC BIOLOGICAL SCIENCES↗

Simulation of interaction between nickel and silicon carbide during the formation of ohmic contacts

For the first time, the quantitative model of interaction between silicide-forming metal Ni and single-crystalline SiC is developed on the basis of the mutual diffusion of components and the volume silicide-formation reaction. The model makes it possible to describe satisfactorily the basic properties of the redistribution of components during the thermal annealing and during the proton irradiation of the Ni-SiC system at elevated temperatures, specifically: the presence of an extended reaction zone, an excess of the carbon concentration over the silicon concentration at the interface with the SiC substrate, and the carbon accumulation near the surface. It is shown that the stimulation of the interaction between metal Ni and SiC by the proton irradiation at an elevated temperature occurs due to an increase in the metal diffusivity and in the constants of rates of reactions of solid-phase silicide-formation. An acceleration of metal diffusion is associated with the generation of elementary radiation defects (interstitial atoms and vacancies), while an increase in the constants of rates of solid-phase reactions is attributed to a generation of vacancies, which contribute free volume.

36 MATERIALS SCIENCE↗

Visualization and quantification of deformation processes controlling the mechanical response of alloys in aggressive environments

The overall objective of this program was to develop the technique of electron tomography for studies of defects and to couple it with real time dynamic experiments such that four-dimensional (time and three spatial dimensions) characterization of dislocation interactions with defects is feasible and apply it to discovery of the fundamental unit processes of dislocation-defect interactions in metallic systems. Strategies to overcome the restrictions normally associated with electron tomography and to make it practical within the constraints of conducting a dynamic experiment in the transmission electron microscope were developed. These methods were used to determine the mechanism controlling the transfer of slip across grain boundaries in FCC and HCP metals, dislocation precipitate interactions in Al alloys, and dislocation-dislocation interactions in HCP Ti. In addition, preliminary investigations of slip transfer across cube-on-cube and incoherent twin interfaces in a multi-layered system, thermal stability of grains in nanongrained Ni and Fe, and on corrosion of Fe films were conducted.

36 MATERIALS SCIENCE↗