Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “finite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Analysis of finite-size phased arrays of circular waveguide elements

A derivation is presented for the calculation of the interelement mutual coupling in a finite-size planar array of waveguide-fed apertures covered by a multilayered dielectric and/or plasma. The general mutual admittance expression is evaluated for circular apertures and the mutual coupling calculations are verified experimentally for two transverse electric circular waveguide mode excited apertures. A parametric study of higher order mode aperture fields indicates that the only significant change in the circular aperture mutual coupling is due to the transverse magnetic mode, which introduces an additional phase shift. Qualitative agreement between calculations for a 183-element array of circular apertures and an infinite array establishes the validity of the finite-array theoretical model.

Bailey, M. C.↗

On numerically accurate finite element

A general criterion for testing a mesh with topologically similar repeat units is given, and the analysis shows that only a few conventional element types and arrangements are, or can be made suitable for computations in the fully plastic range. Further, a new variational principle, which can easily and simply be incorporated into an existing finite element program, is presented. This allows accurate computations to be made even for element designs that would not normally be suitable. Numerical results are given for three plane strain problems, namely pure bending of a beam, a thick-walled tube under pressure, and a deep double edge cracked tensile specimen. The effects of various element designs and of the new variational procedure are illustrated. Elastic-plastic computation at finite strain are discussed.

Nagtegaal, J. C.↗

A finite element solution algorithm for the Navier-Stokes equations

A finite element solution algorithm is established for the two-dimensional Navier-Stokes equations governing the steady-state kinematics and thermodynamics of a variable viscosity, compressible multiple-species fluid. For an incompressible fluid, the motion may be transient as well. The primitive dependent variables are replaced by a vorticity-streamfunction description valid in domains spanned by rectangular, cylindrical and spherical coordinate systems. Use of derived variables provides a uniformly elliptic partial differential equation description for the Navier-Stokes system, and for which the finite element algorithm is established. Explicit non-linearity is accepted by the theory, since no psuedo-variational principles are employed, and there is no requirement for either computational mesh or solution domain closure regularity. Boundary condition constraints on the normal flux and tangential distribution of all computational variables, as well as velocity, are routinely piecewise enforceable on domain closure segments arbitrarily oriented with respect to a global reference frame.

Baker, A. J.↗

A finite element analysis of fatigue crack closure

Experiments have shown that fatigue cracks close at positive loads during constant-amplitude load cycling. The crack-closure phenomenon is caused by residual plastic deformations remaining in the wake of an advancing crack tip. The present paper is concerned with the application of a two-dimensional, nonlinear, finite-element analysis for predicting crack-closure and crack-opening stresses during cyclic loading. A two-dimensional finite-element computer program, which accounts for both elastic-plastic material behavior and changing boundary conditions associated with crack extension and intermittent contact of the crack surfaces under cyclic loading, has been developed. An efficient technique to account for changing boundary conditions was also incorporated into the nonlinear analysis program. This program was subsequently used to study crack extension and crack closure under constant-amplitude and two-level block loading. The calculated crack-closure and crack-opening stresses were qualitatively consistent with experimental observations.

Newman, J. C., Jr.↗

Correlation of finite-element structural dynamic analysis with measured free vibration characteristics for a full-scale helicopter fuselage

The correlation achieved with each program provides the material for a discussion of modeling techniques developed for general application to finite-element dynamic analyses of helicopter airframes. Included are the selection of static and dynamic degrees of freedom, cockpit structural modeling, and the extent of flexible-frame modeling in the transmission support region and in the vicinity of large cut-outs. The sensitivity of predicted results to these modeling assumptions are discussed. Both the Sikorsky Finite-Element Airframe Vibration analysis Program (FRAN/Vibration Analysis) and the NASA Structural Analysis Program (NASTRAN) have been correlated with data taken in full-scale vibration tests of a modified CH-53A helicopter.

Kenigsberg, I. J.↗

Compressible seal flow analysis using the finite element method with Galerkin solution technique

High pressure gas sealing involves not only balancing the viscous force with the pressure gradient force but also accounting for fluid inertia--especially for choked flow. The conventional finite element method which uses a Rayleigh-Ritz solution technique is not convenient for nonlinear problems. For these problems, a finite element method with a Galerkin solution technique (FEMGST) was formulated. One example, a three-dimensional axisymmetric flow formulation has nonlinearities due to compressibility, area expansion, and convective inertia. Solutions agree with classical results in the limiting cases. The development of the choked flow velocity profile is shown.

Zuk, J.↗

Finite element analysis of geometrically nonlinear problems

Recent developments in geometrically nonlinear finite element analysis are reviewed. Following a discussion of the theoretical bases for the construction of finite element equations for geometrically nonlinear analysis, the algorithmic tools for solving the resulting nonlinear equations of the complete system are described. Separate consideration is given to preinstability nonlinear analysis, the calculation of limit points, bifurcation points, and to postbifurcation analysis.

Gallagher, R. H.↗

Multiple scattering from finite inhomogeneous media

Utilizing the characteristic information concerning the apparent phase constant difference between the electric and magnetic fields propagating in an inhomogeneous medium, a theoretical analysis of the multiple scattering of electromagnetic waves in finite inhomogeneous media is presented. The solution is obtained by first approximating the coefficients of a pair of exact coupled first-order differential equations and then solving the equations by first-order iteration. The present first-order approximate solution with multiple scattering considerations is shown to be more accurate than the WKB solution. Methods to improve the accuracy of the first-order solution further are discussed. Application of the solution to slowly varying finite media with periodic properties demonstrates the validity of the solution. The same approach can be extended to frequencies in the optical region by retaining additional terms in the coefficients of the coupled differential equations.

Tang, C. C. H.↗

The modified equation approach to the stability and accuracy analysis of finite-difference methods

The stability and accuracy of finite-difference approximations to simple linear partial differential equations are analyzed by studying the modified partial differential equation. Aside from round-off error, the modified equation represents the actual partial differential equation solved when a numerical solution is computed using a finite-difference equation. The modified equation is derived by first expanding each term of a difference scheme in a Taylor series and then eliminating time derivatives higher than first order by certain algebraic manipulations. The connection between 'heuristic' stability theory based on the modified equation approach and the von Neumann (Fourier) method is established. In addition to the determination of necessary and sufficient conditions for computational stability, a truncated version of the modified equation can be used to gain insight into the nature of both dissipative and dispersive errors.

Warming, R. F.↗

Mutual coupling in a finite planar array of circular apertures

Equations are presented for the calculation of the interelement mutual coupling in a finite-size planar array of waveguide-fed apertures in an infinite flat conductor. The general mutual admittance expression is evaluated for circular apertures, and the mutual coupling calculations are verified experimentally for two Te-(11) mode excited apertures. Qualitative agreement between calculations for a 183-element array and an infinite array establishes the validity of the finite-array theoretical model.

Bailey, M. C.↗

Finite-amplitude thermal convection in a spherical shell

The properties of finite-amplitude thermal convection for a Boussinesq fluid contained in a spherical shell are investigated. All nonlinear terms are retained in the equations, and both axisymmetric and nonaxisymmetric solutions are studied. The velocity is expanded in terms of poloidal and toroidal vectors. Spherical surface harmonics resolve the horizontal structure of the flow, but finite differences are used in the vertical. With a few modifications, the transform method developed by Orszag (1970) is used to calculate the nonlinear terms, while Green's function techniques are applied to the poloidal equation and diffusion terms.

Young, R. E.↗

Mutual coupling in a finite planar array of circular apertures

Equations are presented for the calculation of the interelement mutual coupling in a finite size planar array of wave-guide-fed apertures in an infinite flat conductor. The general mutual admittance expression is evaluated for circular apertures and the mutual coupling calculations are verified experimentally for two TE11 mode excited apertures. Qualitative agreement between calculations for a 183 element array and an infinite array establishes the validity of the finite array theoretical model.

Bailey, M. C.↗

On numerically accurate finite element solutions in the fully plastic range

A general criterion for testing a mesh with topologically similar repeat units is given, and it is shown that only a few conventional element types and arrangements are suitable for computations in the fully plastic range. Further, a new variational principle, which can easily be incorporated into an existing finite element program, is presented. This makes it possible to perform accurate computations even for element designs that would not normally be suitable. An appendix extends the discussion to elastic-plastic computation at finite strain.

Nagtegaal, J. C.↗

A class of finite dimensional optimal nonlinear estimators

Finite dimensional optimal nonlinear state estimators are derived for bilinear systems evolving on nilpotent and solvable Lie groups. These results are extended to other classes of systems involving polynomial nonlinearities. The concepts of exact differentials and path-independent integrals are used to derive optimal finite dimensional estimators for a further class of nonlinear systems.

Marcus, S. I.↗

Finite difference methods for transient signal propagation in stratified dispersive media

Explicit difference equations are presented for the solution of a signal of arbitrary waveform propagating in an ohmic dielectric, a cold plasma, a Debye model dielectric, and a Lorentz model dielectric. These difference equations are derived from the governing time-dependent integro-differential equations for the electric fields by a finite difference method. A special difference equation is derived for the grid point at the boundary of two different media. Employing this difference equation, transient signal propagation in an inhomogeneous media can be solved provided that the medium is approximated in a step-wise fashion. The solutions are generated simply by marching on in time. It is concluded that while the classical transform methods will remain useful in certain cases, with the development of the finite difference methods described, an extensive class of problems of transient signal propagating in stratified dispersive media can be effectively solved by numerical methods.

Lam, D. H.↗

Stress analysis and stress intensity factors for finite geometry solids containing rectangular surface cracks

The line method of analysis is applied to the Navier-Cauchy equations of elastic equilibrium to calculate the displacement field in a finite geometry bar containing a variable depth rectangular surface crack under extensionally applied uniform loading. The application of this method to these equations leads to coupled sets of simultaneous ordinary differential equations whose solutions are obtained along sets of lines in a discretized region. Using the obtained displacement field, normal stresses and the stress intensity factor variation along the crack periphery are calculated for different crack depth to bar thickness ratios. Crack opening displacements and stress intensity factors are also obtained for a through-thickness, center cracked bar with variable thickness. The reported results show a considerable potential for using this method in calculating stress intensity factors for commonly encountered surface crack geometries in finite solids.

Gyekenyesi, J. P.↗

The finite element method in low speed aerodynamics

The finite element procedure is shown to be of significant impact in design of the 'computational wind tunnel' for low speed aerodynamics. The uniformity of the mathematical differential equation description, for viscous and/or inviscid, multi-dimensional subsonic flows about practical aerodynamic system configurations, is utilized to establish the general form of the finite element algorithm. Numerical results for inviscid flow analysis, as well as viscous boundary layer, parabolic, and full Navier Stokes flow descriptions verify the capabilities and overall versatility of the fundamental algorithm for aerodynamics. The proven mathematical basis, coupled with the distinct user-orientation features of the computer program embodiment, indicate near-term evolution of a highly useful analytical design tool to support computational configuration studies in low speed aerodynamics.

Baker, A. J.↗

A triangular thin shell finite element: Nonlinear analysis

Aspects of the formulation of a triangular thin shell finite element which pertain to geometrically nonlinear (small strain, finite displacement) behavior are described. The procedure for solution of the resulting nonlinear algebraic equations combines a one-step incremental (tangent stiffness) approach with one iteration in the Newton-Raphson mode. A method is presented which permits a rational estimation of step size in this procedure. Limit points are calculated by means of a superposition scheme coupled to the incremental side of the solution procedure while bifurcation points are calculated through a process of interpolation of the determinants of the tangent-stiffness matrix. Numerical results are obtained for a flat plate and two curved shell problems and are compared with alternative solutions.

Thomas, G. R.↗