Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “discrete element method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Critical Masses for Unreflected Metal Spheres

Calculated critical masses of bare metal spheres for 28 actinide isotopes, using the SCALE/XSDRNPM one-dimensional, discrete-ordinates system, are presented. ENDF/B-VI, ENDF/B-VII, and JENDL-3.3 cross sections were used in the calculations. Results are given for isotopes of uranium, neptunium, plutonium, americium, curium, californium, and for one isotope of einsteinium. Calculated k values for these same nuclides are also given. We show that, for non-threshold or low-threshold fission nuclides, a good approximation for the nuclide k is the value of nubar at 1 MeV. A plot of the critical mass versus k values is given for 19 nuclides with A-numbers between 232 and 250. The peaks in the critical mass curve (for seven nuclides) correspond to dips in the k curve. For the seven cases with the largest critical mass, six are even-even nuclides. Neptunium-237, with a critical mass of about 62.7 kg (ENDF/B-VI calculation), has an odd number of protons and an even number of neutrons. However, two cases with quite small critical masses, 232U and 236Pu, are also even-even. These two nuclides do not exhibit threshold fission behavior like most other even-even nuclides. The largest critical mass is 208.8 kg for 243Am, and the smallest is 2.44 kg for 251Cf. The calculated k values vary from 1.5022 for 234U to 4.4767 for 251Cf. A correlation between the calculated critical mass (kg) and the fission spectrum averaged value of is given for the elements U, Np, Pu, Am, Cm, and Cf. For each of the five elements, a fit to the data for that element is provided. In each case the fit employs a negative exponential of the form mass = exp (A + B ~ ln() The values of A and B are element dependent and vary slightly for each of the five elements. The method described here is mainly applicable for non-threshold fission nuclides (15 of the 28 nuclides considered in this paper). There are three exceptions, 238Pu, 244Cm, and 250Cf, which all exhibit threshold fission behavior.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quantum-corrected drift-diffusion models: Solution fixed point map and finite element approximation

This article deals with the analysis of the functional iteration, denoted Generalized Gummel Map (GGM), proposed in [C. de Falco, A.L. Lacaita, E. Gatti, R. Sacco, Quantum-Corrected Drift-Diffusion Models for Transport in Semiconductor Devices, J. Comp. Phys. 204 (2) (2005) 533-561] for the decoupled solution of the Quantum Drift-Diffusion (QDD) model. The solution of the problem is characterized as being a fixed point of the GGM, which permits the establishment of a close link between the theoretical existence analysis and the implementation of a numerical tool, which was lacking in previous non-constructive proofs [N.B. Abdallah, A. Unterreiter, On the stationary quantum drift-diffusion model, Z. Angew. Math. Phys. 49 (1998) 251-275, R. Pinnau, A. Unterreiter, The stationary current-voltage characteristics of the quantum drift-diffusion model, SIAM J. Numer. Anal. 37 (1) (1999) 211-245]. The finite element approximation of the GGM is illustrated, and the main properties of the numerical fixed point map (discrete maximum principle and order of convergence) are discussed. Numerical results on realistic nanoscale devices are included to support the theoretical conclusions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low-temperature synthesis of homogeneous solid solutions of scheelite-structured Ca 1-x Sr x WO 4 and Sr 1-x Ba x WO 4 nanocrystals

Here, a series of compositionally complex scheelite-structured nanocrystals of the formula A 1-x A’ x WO 4 (A = Ca, Sr, Ba) have been prepared under benign synthesis conditions using the vapor diffusion sol–gel method. Discrete nanocrystals with sub-20 nm mean diameters were obtained after kinetically controlled hydro- lysis and polycondensation at room temperature, followed by composition-dependent thermal aging at or below 60 °C. Rietveld analysis of X-ray diffraction data and Raman spectroscopy verified the synthesis of continuous and phase-pure nanocrystal solid solutions across the entire composition space for A 1-x A’ x WO 4 , where 0 ≤ x ≤ 1. Elemental analysis by X-ray photoelectron and inductively coupled plasma- atomic emission spectroscopies demonstrated excellent agreement between the nominal and experi- mentally determined elemental stoichiometries, while energy dispersive X-ray spectroscopy illustrated good spatial elemental homogeneity within these nanocrystals synthesized under benign conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

An Efficient B-Spline Lagrangian/Eulerian Method for Compressible Flow, Shock Waves, and Fracturing Solids

This study presents a new method for modeling the interaction between compressible flow, shock waves, and deformable structures, emphasizing destructive dynamics. Extending advances in time-splitting compressible flow and the Material Point Methods (MPM), we develop a hybrid Eulerian and Lagrangian/Eulerian scheme for monolithic flow-structure interactions. We adopt the second-order WENO scheme to advance the continuity equation. To stably resolve deforming boundaries with sub-cell particles, we propose a blending treatment of reflective and passable boundary conditions inspired by the theory of porous media. The strongly coupled velocity-pressure system is discretized with a new mixed-order finite element formulation employing B-spline shape functions. Shock wave propagation, temperature/density-induced buoyancy effects, and topology changes in solids are unitedly captured.

97 MATHEMATICS AND COMPUTING↗

Utilization of Methacrylates and Polymer Matrices for the Synthesis of Ion Specific Resins

Disposal, storage, and/or transmutation of actinides such as americium (Am) will require the development of specific separation schemes. Existing efforts focus on solvent extraction systems for achieving suitable separation of actinide from lanthanides. However, previous work has shown the feasibility of ion-imprinting polymer-based resins for use in ion-exchange-type separations with metal ion recognition. Phenolic-based resins have been shown to function well for Am-Eu separations, but these resins exhibited slow kinetics and difficulties in the imprinting process. This project addresses the need for new and innovative methods for the selective separation of actinides through novel ion-imprinted resins. The project team will explore incorporation of metals into extended frameworks, including the possibility of 3D polymerized matrices that can serve as a solid-state template for specific resin preparation. For example, an anhydrous trivalent f-element chain can be formed directly from a metal carbonate, and methacrylic acid from water. From these simple coordination complexes, molecules of discrete size or shape can be formed via the utilization of coordinating ligands or by use of an anionic multi-ligand system incorporating methacrylate. Additionally, alkyl methyl methacrylates have been used successfully to create template nanospaces, which underscores their potential utility as 3D polymerized matrices. This evidence provides a unique route for the preparation of a specific metal ion template for the basis of ion-exchange separations. Such separations may prove to be excellent discriminators of metal ions, even between f-elements. Resins were prepared and evaluated for sorption behavior, column properties, and proton exchange capacity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

R-Adaptivity to Enable Compression of Elementary Computations in Extreme-Scale Finite Element Simulators

Modern computing systems are capable of exascale calculations, which are revolutionizing the development and application of high-fidelity numerical models in computational science and engineering. While these systems continue to grow in processing power, the available system memory has not increased commensurately, and electrical power consumption continues to grow. A predominant approach to limit the memory usage in large-scale applications is to exploit the abundant processing power and continually recompute many low-level simulation quantities, rather than storing them. However, this approach can adversely impact the throughput of the simulation and diminish the benefits of modern computing architectures. We present three novel contributions to reduce the memory burden while maintaining, and sometimes improving, performance in simulations based on finite element discretizations. The first contribution develops dictionary-based data compression schemes that detect and exploit the structure of the discretization, due to redundancies across the finite element mesh. While these schemes are shown to reduce memory requirements by more than 99% on meshes with large numbers of identical mesh cells, there are applications where this structure does not exist. The second contribution leverages a recently developed augmented Lagrangian optimization algorithm to enable r-adaptivity for meshes with the goal of enhancing the redundancies in the mesh. The third contribution extends these methods to patch-based linear solvers and preconditioners by compressing local matrices. Numerical results demonstrate the effectiveness of the proposed methods to detect, enhance and exploit mesh structure on a suite of examples inspired by large-scale applications.

97 MATHEMATICS AND COMPUTING↗

Comparison of radiated noise from shrouded and unshrouded propellers

The ducted propeller in a free field is modeled using the finite element method. The generation, propagation, and radiation of sound from a ducted fan is described by the convened wave equation with volumetric body forces. Body forces are used to introduce the blade loading for rotating blades and stationary exit guide vanes. For an axisymmetric nacelle or shroud, the problem is formulated in cylindrical coordinates. For a specified angular harmonic, the angular coordinate is eliminated, resulting in a two-dimensional representation. A finite element discretization based on nine-node quadratic isoparametric elements is used.

Eversman, Walter↗

Some Experiences with Nonoverlapping Schur Complement Parallel Preconditioning for CFD Calculations

In this work we consider solving matrices which arise from the discretization of advection-diffusion field equations on arbitrary triangulated domains using stabilized numerical methods. The talk will discuss several candidate matrix preconditioning algorithms based on the 2 x 2 block factorization induced by an apriori partitioning of the triangulated domain. Application of the 2 x 2 block preconditioner requires the formation and inversion of the Schur complement submatrix. We consider several strategies for simplifying this task: incomplete Schur complement factorizations, drop tolerance element filling, Schur complement probing, and localized Schur complement inversion. Numerical results will be shown comparing performance and efficiency of these approximations. The matrix preconditioner has also been embedded into a Newton algorithm for solving the nonlinear Euler and Navier-Stokes equations governing compressible flow. The remainder of the talk will show numerous examples in CFD to demonstrate the efficiency and robustness of the techniques.

Barth, Timothy J.↗

Weak boundary conditions for Lagrangian shock hydrodynamics: A high-order finite element implementation on curved boundaries

Here, we propose a new Nitsche-type approach for weak enforcement of normal velocity boundary conditions for a Lagrangian discretization of the compressible shock-hydrodynamics equations using high-order finite elements on curved boundaries. Specifically, the variational formulation is appropriately modified to enforce free-slip wall boundary conditions, without perturbing the structure of the function spaces used to represent the solution, with a considerable simplification with respect to traditional approaches. Total energy is conserved and the resulting mass matrices are constant in time. The robustness and accuracy of the proposed method are validated with an extensive set of tests involving nontrivial curved boundaries.

97 MATHEMATICS AND COMPUTING↗

Development of a finite dynamic element for free vibration analysis of two-dimensional structures

The paper develops an efficient free-vibration analysis procedure of two-dimensional structures. This is achieved by employing a discretization technique based on a recently developed concept of finite dynamic elements, involving higher order dynamic correction terms in the associated stiffness and inertia matrices. A plane rectangular dynamic element is developed in detail. Numerical solution results of free-vibration analysis presented herein clearly indicate that these dynamic elements combined with a suitable quadratic matrix eigenproblem solution technique effect a most economical and efficient solution for such an analysis when compared with the usual finite element method.

Gupta, K. K.↗

Worst case estimation of homology design by convex analysis

The methodology of homology design is investigated for optimum design of advanced structures. for which the achievement of delicate tasks by the aid of active control system is demanded. The proposed formulation of homology design, based on the finite element sensitivity analysis, necessarily requires the specification of external loadings. The formulation to evaluate the worst case for homology design caused by uncertain fluctuation of loadings is presented by means of the convex model of uncertainty, in which uncertainty variables are assigned to discretized nodal forces and are confined within a conceivable convex hull given as a hyperellipse. The worst case of the distortion from objective homologous deformation is estimated by the Lagrange multiplier method searching the point to maximize the error index on the boundary of the convex hull. The validity of the proposed method is demonstrated in a numerical example using the eleven-bar truss structure.

Yoshikawa, N.↗

Elastic Model Transitions: a Hybrid Approach Utilizing Quadratic Inequality Constrained Least Squares (LSQI) and Direct Shape Mapping (DSM)

A method for transitioning linear time invariant (LTI) models in time varying simulation is proposed that utilizes both quadratically constrained least squares (LSQI) and Direct Shape Mapping (DSM) algorithms to determine physical displacements. This approach is applicable to the simulation of the elastic behavior of launch vehicles and other structures that utilize multiple LTI finite element model (FEM) derived mode sets that are propagated throughout time. The time invariant nature of the elastic data for discrete segments of the launch vehicle trajectory presents a problem of how to properly transition between models while preserving motion across the transition. In addition, energy may vary between flex models when using a truncated mode set. The LSQI-DSM algorithm can accommodate significant changes in energy between FEM models and carries elastic motion across FEM model transitions. Compared with previous approaches, the LSQI-DSM algorithm shows improvements ranging from a significant reduction to a complete removal of transients across FEM model transitions as well as maintaining elastic motion from the prior state.

Jurenko, Robert J.↗

Modeling Deformable Linear Objects for Autonomous Robotic Outfitting of Lunar Surface Systems

This paper presents structural models of deformable linear objects (DLOs). DLOs are a subclass of deformable objects that encompasses common outfitting elements such as cables and ropes. Models are validated through hardware experiments, and integration in a robotic autonomy architecture for space environments is discussed. A persistent human presence on the lunar surface is one of the next major milestones in space exploration. This requires the development of robust extraplanetary construction technologies including structures and materials modeling and robotic systems. Previous robotic construction technology development has primarily focused on structural assembly, with significantly less focus on robotically performed outfitting tasks to instantiate subsystems providing power, data, life support, etc. These tasks involve manipulation of highly flexible elements, which are difficult to model, such as cable harnesses, ropes, and hoses. Robotic manipulation of DLOs, especially cable harnesses, is an active area of research as cable harnesses are essential for providing power and data to space assets. DLO models that can be used for robot manipulator trajectory generation are necessary for autonomous operation of lunar infrastructure. There are many proposed methods for modeling DLOs, and they primarily fall into three types: 1) discrete model-based, 2) continuum model-based, and 3) Neural Network-based. These types each have pros and cons, and the tradeoff between model accuracy and computational speed informs which type should be used. An understanding of this trade-off is imperative for real-time control of autonomous systems. High computational requirements reduce the speed of the model, making real-time control difficult, while accuracy is critical to preventing collisions. Discrete models, such as a mass-spring multibody representation, require relatively few calculations, and accuracy is directly tied to the step size of the discretization. Continuum models, such as a B-spline representation or a Cosserat rod model (a mix of continuous and discrete), are more informed of the structural properties of the cable and are much more accurate than a rigid body mass-spring model, but at significant computational cost. A Neural Network approach can provide an online solution with very few computational steps, but properly generating training data can be difficult and validation for an in-space application is not trivial. This paper explores the trade-off between different modeling approaches and compares accuracy and computational speed/complexity of the three types mentioned above. Model accuracy is evaluated using a cable in a static configuration. True cable shape is obtained using a depth camera for RGB images and point-cloud segmentation. The purpose of this experiment is to evaluate the trade-offs of different approaches to the DLO modeling problem. Understanding the tradeoffs between different cable modeling techniques paves the way for developing robotic control and planning architectures necessary for real-time manipulation of DLOs for lunar infrastructure outfitting. Real-time control is required for robotic systems to be able to actively manipulate a cable in a harsh environment where model and sensor errors compound, and environmental conditions can cause significant disturbances. Cable routing must be performed in areas with high density of objects/obstacles: through truss structures, near solar panels or mirror arrays, next to bundles of electrical equipment. Understanding the best way to plan and manipulate a cable without disrupting the environment or damaging the cable is imperative to robotic outfitting operations on the lunar surface.

Amy M Quartaro↗

Curvilinear Displacement Transfer Functions for Deformed Shape Predictions of Curved Structures Using Distributed Surface Strains

Curvilinear Displacement Transfer Functions were formulated for deformed shape predictions of different curved structures using surface strains. The embedded curved beam (depth-wise cross section of a curved structure along a surface strain-sensing line) was discretized into multiple small domains, with domain junctures matching the strain-sensing stations. Thus, the surface strain distribution can be described with a piecewise linear or a piecewise nonlinear function. The discrete approach enabled piecewise integrations of a curvature-strain differential equation for the embedded curved beam to yield closed-form Curvilinear Displacement Transfer Functions, which are written in terms of embedded curved-beam geometrical parameters and surface strains. By inputting the surface strain data, the Curvilinear Displacement Transfer Functions can transform surface strains into deflections along each embedded curved beam for mapping out the overall structural deformed shapes. The finite-element method was used to analytically generate the surface strains of the curved beams. The deformed shape prediction accuracies were then determined by comparing the theoretical deflections with the finite-element-generated deflections, which were used as yardsticks. By introducing the correction factors in simple mathematical forms, the Curvilinear Displacement Transfer Functions can be quite accurate for shape predictions of different curved-beam structures ranging from limit case of straight beam up to semicircular curved beam.

Ko, William L.↗

Development and application of a method for predicting rotor free wake positions and resulting rotor blade air loads. Volume 1: Model and results

Rotor wake geometries are predicted by a process similar to the startup of a rotor in a free stream. An array of discrete trailing and shed vortices is generated with vortex strengths corresponding to stepwise radial and azimuthal blade circulations. The array of shed and trailing vortices is limited to an arbitrary number of azimuthal steps behind each blade. The remainder of the wake model of each blade is an arbitrary number of trailing vortices. Vortex element end points were allowed to be transported by the resultant velocity of the free stream and vortex-induced velocities. Wake geometry, wake flow, and wake-induced velocity influence coefficients are generated by this program for use in the blade loads portion of the calculations. Blade loads computations include the effects of nonuniform inflow due to a free wake, nonlinear airfoil characteristics, and response of flexible blades to the applied loads. Computed wake flows and blade loads are compared with experimentally measured data. Predicted blade loads, response and shears and moments are obtained for a model rotor system having two independent rotors. The effects of advance ratio, vertical separation of rotors, different blade radius ratios, and different azimuthal spacing of the blades of one rotor with respect to the other are investigated.

Sadler, S. G.↗

Development of a discontinuous approach for modeling fluid flow in heterogeneous media using the numerical manifold method

Summary In the numerical modeling of fluid flow in heterogeneous geological media, large material contrasts associated with complexly intersected material interfaces are challenging, not only related to mesh discretization but also for the accurate realization of the corresponding boundary constraints. To address these challenges, we developed a discontinuous approach for modeling fluid flow in heterogeneous media using the numerical manifold method (NMM) and the Lagrange multiplier method (LMM) for modeling boundary constraints. The advantages of NMM include meshing efficiency with fixed mathematical grids (covers), the convenience of increasing the approximation precision, and the high integration precision provided by simplex integration. In this discontinuous approach, the elements intersected by material interfaces are divided into different elements and linked together using the LMM. We derive and compare different forms of LMMs and arrive at a new LMM that is efficient in terms of not requiring additional Lagrange multiplier topology, yet stringently derived by physical principles, and accurate in numerical performance. To demonstrate the accuracy and efficiency of the NMM with the developed LMM for boundary constraints, we simulate a number of verification and demonstration examples, involving a Dirichlet boundary condition and dense and intersected material interfaces. Last, we applied the developed model for modeling fluid flow in heterogeneous media with several material zones containing a fault and an opening. We show that the developed discontinuous approach is very suitable for modeling fluid flow in strongly heterogeneous media with good accuracy for large material contrasts, complex Dirichlet boundary conditions, or complexly intersected material interfaces. Copyright © 2015 John Wiley & Sons, Ltd.

Hu, Mengsu↗

Level-set topology optimization with PDE generated conformal meshes

This paper presents a level-set topology optimization approach that uses conformal meshes for the analysis of the displacement field. The structure’s boundary is represented by the iso-contour of a level-set field discretized on a fixed background design mesh. The conformal mesh is updated for each design iteration via a PDE based mesh morphing process that identifies the set of facets in the background mesh that are homeomorphic to the boundary and relaxes the homeomorphic mesh to conform to the structure’s boundary and ensure high element quality. The conformal mesh allows for a more accurate computation of the response versus density and some level-set based methods which interpolate material properties using the volume fraction. Numerical examples illustrate the proposed approach by optimizing linear-elastic two- and three-dimensional structures, wherein insight into the performance of the mesh morphing process is provided. The examples also highlight the scalability of the approach.

42 ENGINEERING↗

A projection method for particle resampling

Particle discretizations of partial differential equations are advantageous for high-dimensional kinetic models in phase-space due to their better scalability than continuum approaches with respect to dimension. Complex processes collectively referred to as particle noise hamper long time simulations with particle methods. One approach to address this problem is particle mesh adaptivity, or remapping, known as particle resampling and remeshing. Here, this work introduces a resampling method that projects particles to and from a (finite element) function space. The method is simple, using standard sparse linear algebra and finite element techniques, and it preserves all moments up to the order of a polynomial represented exactly by the continuum function space. It is distinguished from most other mesh-based methods in that new particle positions and number are decoupled from the mesh, allowing particle and continuum meshes to be adapted relatively independently. While this work is developed with structured particle and continuum phase-space grids on 1X + 1V Vlasov-Poisson models of Landau damping and two-stream instability, the method is well-suited to unstructured grids. Stable long time dynamics are demonstrated up to time T = 500. Reproducibility artifacts and data are publicly available.

Kinetic methods↗