Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Morphology and structure features of ZnAl{sub 2}O{sub 4} spinel nanoparticles prepared by matrix-isolation-assisted calcination

Graphical abstract: The substrate ZnO as the isolation medium is effective in preventing the sintering and agglomeration of ZnAl{sub 2}O{sub 4} nanoparticles, and it also prevents their contamination. High purity, well-dispersed, and single-crystal ZnAl{sub 2}O{sub 4} nanoparticles with 3.72 eV band gap were obtained. - Abstract: Well-dispersed ZnAl{sub 2}O{sub 4} spinel nanoparticles with an average crystalline size of 25.7 nm were synthesized successfully and easily by polymer-network and matrix-isolation-assisted calcination. The product microstructure and features were investigated by X-ray diffractometry, thermogravimetric and differential thermal analysis, Fourier transform-infrared spectroscopy, N{sub 2} adsorption–desorption isotherms, and energy dispersive X-ray spectra. The morphology and optical performance of the as-prepared ZnAl{sub 2}O{sub 4} nanoparticles were characterized by scanning electron microscope, transmission electron microscopy, and photoluminescence spectrometer. Experimental results indicate that excess ZnO acted as the isolation medium is effective in preventing the sintering and agglomeration of ZnAl{sub 2}O{sub 4} nanoparticles, and it also prevents their contamination. Then, high purity and well-dispersed ZnAl{sub 2}O{sub 4} nanoparticles with single-crystal structure were obtained.

36 MATERIALS SCIENCE↗

Facile synthesis of size-tunable CuO/graphene composites and their high photocatalytic performance

Graphical abstract: A novel leaf-like CuO/graphene nanosheet (GNS) with tunable size was prepared by a facile hydrothermal process, and the stirring temperature in synthesis was found to be effective for controlling its size. - Highlights: • Leaf-like CuO/GNS nanocomposites with tunable size was prepared via hydrothermal method. • With increase of stirring temperature, the surface area becomes larger. • The morphology of nanocomposites plays an important role in photocatalysis. - Abstract: Size-tunable leaf-like copper oxide modified by graphene nanosheets was synthesized by a facile hydrothermal method. Stirring temperature control during synthesis was found to be important in effectively controlling the size of CuO nanoparticles, with smaller size CuO nanoparticles produced by increasing the stirring temperature. The as-prepared nanocomposites were characterized by XRD, TEM, and nitrogen adsorption–desorption. The nanocomposites exhibited better catalytic activity than pure CuO toward the degradation of rhodamine B in the presence of H{sub 2}O{sub 2} under visible light irradiation. The catalytic performance was improved with decreasing particle size of the nanocomposites, which was attributed to the increased in the rate of interelectron transfer at the interface.

36 MATERIALS SCIENCE↗

Structural, magnetic and catalytic properties of cobalt chromite obtained through precursor method

Highlights: • CoCr{sub 2}O{sub 4} was synthesized through the tartarate and gluconate precursor routes. • Both routes led to the formation of the single-phase CoCr{sub 2}O{sub 4}. • The crystallite size was in the range of 14–21 nm. • CoCr{sub 2}O{sub 4} samples presented ferrimagnetic ordering below Currie temperature T{sub c} = 97 K. • CoCr{sub 2}O{sub 4} samples presented catalytic performance in the total oxidation of CH{sub 4}. - Abstract: Cobalt chromite (CoCr{sub 2}O{sub 4}) was synthesized through the precursor method. The precursors: (NH{sub 4}){sub 3}[CoCr{sub 2}(C{sub 4}O{sub 6}H{sub 4}){sub 4}(OH){sub 3}]·4H{sub 2}O, (NH{sub 4}){sub 3}[CoCr{sub 2}(C{sub 6}O{sub 7}H{sub 10}){sub 4}(C{sub 6}O{sub 7}H{sub 9})]·5H{sub 2}O were characterized by elemental chemical analysis, infrared (IR) and ultraviolet–visible (UV–vis) spectroscopy, and thermal analysis. The final oxides were characterized by X-ray diffraction (XRD), scanning and transmission electron microscopy (SEM/TEM), UV–vis, IR, Raman spectroscopy (RS), magnetic measurements, N{sub 2} adsorption–desorption analyses and X-ray photoelectron spectroscopy (XPS). XRD confirmed the cubic CoCr{sub 2}O{sub 4} phase only and determined average crystallite sizes between 14 and 21 nm. Electron microscopy revealed morphology corresponding to the complete crystallization into cubic CoCr{sub 2}O{sub 4}. All the samples presented ferrimagnetic ordering below the Currie temperature (T{sub c}), and a phase transition at T{sub s} ∼26 K attributed to the onset of long-range spiral magnetic order. The CoCr{sub 2}O{sub 4} nanoparticles generated through the gluconate route following calcination at 700 °C for 1 h were found to have the best catalytic activity in the total oxidation of methane.

36 MATERIALS SCIENCE↗

Photocatalytic CO{sub 2} reduction by CH{sub 4} over montmorillonite modified TiO{sub 2} nanocomposites in a continuous monolith photoreactor

Highlights: • TiO{sub 2}/MMT supported monolith photo-reactor was tested for CO{sub 2} reduction with CH{sub 4}. • MMT inhibited crystal growth and enhanced TiO{sub 2} photo-activity in monolith reactor. • CO{sub 2} was reduced by CH{sub 4} to CO, CH{sub 3}OH, C{sub 2}H{sub 6}, C{sub 3}H{sub 6} and C{sub 3}H{sub 8} in a monolith reactor. • CO yield over TiO{sub 2}/MMT was 237.5 μmol g-catal.{sup −1} h{sup −1}, a 2.52 fold than TiO{sub 2}. • Stability test revealed TiO{sub 2}/MMT partially lost photo-activity in reused cyclic runs. - Abstract: In this study, the performance of montmorillonite (MMT) modified TiO{sub 2} nanocomposites for photocatalytic CO{sub 2} reduction with CH{sub 4} in a continuous monolith photoreactor has been investigated. The MMT modified TiO{sub 2} nanocomposites were dip-coated over monolith channels and were characterized by XRD, SEM, TEM, XPS, N{sub 2}-adsorption–desorption and UV–vis spectroscopy. The MMT produced anatase phase of TiO{sub 2} and reduced TiO{sub 2} crystallite size from 19 nm to 13 nm. CO was the major reduction product with a yield rate of 237.5 μmol g-catal.{sup −1} h{sup −1} over 10 wt.% MMT-loaded TiO{sub 2} at 100 °C, and CO{sub 2}/CH{sub 4} feed ratio 1.0. The photoactivity of MMT-loaded TiO{sub 2} monolithic catalyst was 2.52 times higher than bare TiO{sub 2}. Likewise, low concentrations of C{sub 2}H{sub 6}, CH{sub 3}OH, C{sub 3}H{sub 6} and C{sub 3}H{sub 8} were detected in the products mixture. These results inferred MMT modified TiO{sub 2} and monolith photoreactor were beneficial for enhancing photocatalysis process with appreciable productivity. The stability test revealed photoactivity of MMT-loaded TiO{sub 2} nanocomposites partially diminished in recycle runs.

36 MATERIALS SCIENCE↗

MgCoAl and NiCoAl LDHs synthesized by the hydrothermal urea hydrolysis method: Structural characterization and thermal decomposition

Highlights: • We synthesized MgCoAl and NiCoAl LDHs by the urea hydrolysis method. • Aluminum rich and crystalline materials have been formed. • The calcination of the LDHs generated mixed oxides with high surface areas. - Abstract: Layered double hydroxides (LDHs) with Mg/Co/Al and Ni/Co/Al were synthesized for the first time by the urea hydrolysis method. The experimental conditions promoted aluminum rich and crystalline materials. The formation of LDHs was investigated by powder X-ray diffraction (XRD), chemical analysis, solid state nuclear magnetic resonance with magic angle spinning ({sup 27}Al-MAS-NMR), simultaneous thermogravimetric/differential thermal analysis (TGA/DTA), FTIR spectroscopy, scanning electron microscopy (SEM), and N{sub 2} adsorption–desorption experiments. A single phase corresponding to LDH could be obtained in all the investigated compositions. Thermal calcination of these LDHs at 500 °C resulted in the formation of solid solutions in which Al{sup 3+} was dissolved. All the calcined materials have rock-salt like structures and high surface areas.

36 MATERIALS SCIENCE↗

The structure-directed effect of Al-based metal–organic frameworks on fabrication of alumina by thermal treatment

Highlights: • We use Al-MOFs as precursor in the fabrication process of mesoporous alumina by thermal treatment. • The obtained mesoporous alumina has dual pore system and five-fold aluminum. • The aluminum building units in the precursor show structure-directed effect on the formation of alumina. - Abstract: In this work, the block-shaped Al-based metal–organic frameworks (Al-MOFs) MIL-53 have been synthesized by hydrothermal method. To detect the correlation between the structure of Al-MOFs and the formation of alumina, the ligands are eliminated by thermal treatment. MIL-53 and the calcination products were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), transmission electron microscopy (TEM), nitrogen adsorption–desorption and solid-state {sup 27}Al nuclear magnetic resonance ({sup 27}Al NMR). It was found that after calcination, the block-shaped Al-MOFs precursor turns into high-crystallinity mesoporous alumina nanosheets, and the thermal treatment product γ-alumina possesses a dual pore system and a large surface area (146 m{sup 2}/g), with five-fold aluminum. During the thermal treatment process, the structure of MIL-53 and its secondary building units have structure-directed effect in the formation of alumina.

36 MATERIALS SCIENCE↗

Graphene nanosheets decorated with tunable magnetic nanoparticles and their efficiency of wastewater treatment

Highlights: • Magnetic graphene/Fe{sub 3}O{sub 4} nanocomposites were synthesized by a facile and fast one-pot method. • The sizes of Fe{sub 3}O{sub 4} nanocrystals can be controlled by the weight ratio of GO to Fe{sub 3}O{sub 4}. • The graphene/Fe{sub 3}O{sub 4} hybrid structures are highly efficient in purification of wastewater. • The decline in efficiencies of graphene/Fe{sub 3}O{sub 4} is not more than 1.5% after five cycling runs. - Abstract: Magnetic graphene–Fe{sub 3}O{sub 4} nanocomposites (G/Fe{sub 3}O{sub 4}) were fabricated by a facile and fast one-pot method and used as adsorbent to remove dye for wastewater using Rhodamine B as the adsorbate. Samples with different weight ratios of graphene oxide (GO) to Fe{sub 3}O{sub 4} were prepared. The transmission electron microscopy results exhibit that the sizes of Fe{sub 3}O{sub 4} nanocrystals decrease with the increasing of weight ratio of GO to Fe{sub 3}O{sub 4}. The magnetic characterization demonstrates that the saturation magnetization of nanocomposites decreases with the decreasing sizes of Fe{sub 3}O{sub 4} nanocrystals. The investigation of adsorption kinetics and isotherm indicates the adsorption process can be described by Langmuir model and nanocomposites with the smaller sizes of Fe{sub 3}O{sub 4} nanoparticles show better adsorption ability. Furthermore, the adsorbents could be recovered conveniently by magnetic separation and recyclable used after desorption process, and the decline in efficiencies of all samples is not more than 1.5% after five cycling runs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microwave-assisted rapid synthesis of birnessite-type MnO{sub 2} nanoparticles for high performance supercapacitor applications

Highlights: • Birnessite-type MnO{sub 2} nanoparticles were prepared by the microwave-assisted reflux. • The microwave reaction duration was only 5 min. • A specific capacitance of 329 F g{sup −1} was obtained for birnessite-type MnO{sub 2}. - Abstract: Birnessite-type MnO{sub 2} nanoparticles have been successfully synthesized by the microwave-assisted reflux as short as 5 min. The microstructure and morphology of the products were characterized by X-ray diffraction, N{sub 2} adsorption–desorption isotherms, scanning electron microscopy, transmission electron microscopy. The electrochemical properties of the as-prepared MnO{sub 2} as an electrode material for supercapacitor were investigated by cyclic voltammetry and galvanostatic charge-discharge measurements in 1 M Na{sub 2}SO{sub 4} electrolyte, and a high specific capacitance of 329 F g{sup −1} was achieved at a current density of 0.2 A g{sup −1}. The specific capacitance retention was 92% after 1000 cycles at 2 A g{sup −1}, suggesting that it is a promising electrode material for supercapacitors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mesoporous palladium–copper ferrites as highly efficient and magnetically separable catalysts for Suzuki coupling reaction

Highlights: • Mesoporous Cu–Pd ferrites were prepared by a facile, mild and environment-friendly route. • The catalysts have shown great efficiencies in Suzuki coupling reaction and up to 36.9 × 10{sup 3} h{sup −1} TOF can be obtained. • The catalyst can be magnetically separated easily and have shown prominent recyclability. - Abstract: Mesoporous Cu–Pd ferrites were prepared by using MCM-41 and SBA-15 mesoporous molecular sieves as hard templates and well characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), ICP-atomic emission spectroscopy, N{sub 2} adsorption–desorption and X-ray photoelectric spectroscopy (XPS). Compared with samples prepared by the sol–gel auto-combustion methods, the as-prepared mesoporous ferrites have shown uniform pore size and much higher specific surface areas. The samples showed a remarkably high activity in connection with the Suzuki coupling reaction, especially Cu{sub 0.99}Pd{sub 0.01}Fe{sub 2}O{sub 4} prepared by using MCM-41 as template obtained an excellent TOF as high as 36.9 × 10{sup 3} h{sup −1} and no obvious decrease in the activity was observed after ten consecutive runs.

36 MATERIALS SCIENCE↗

Catalytic copyrolysis of particle board and polypropylene over Al-MCM-48

Highlights: • Al-MCM-48 was used for catalytic copyrolysis of particle board and polypropylene. • Catalytic produced mainly hydrocarbons. • The hydrocarbons produced were mainly in the diesel range. - Abstract: Particle board and polypropylene (PP) at a mixing ratio of 1:1 were copyrolyzed over two Al-MCM-48 catalysts with Si/Al ratios of 20 and 80. The catalyst characteristics were examined by measuring the Brunauer-Emmett-Teller surface area, temperature programmed desorption of ammonia, and X-ray diffraction. The main pyrolysis products of particle board were oxygenates, acids, and phenolics, whereas a large quantity of hydrocarbons within the diesel fuel range was produced from copyrolysis with polypropylene. The catalytic copyrolysis of particle board and PP over the Al-MCM-48 catalysts produced bio-oil with a much larger hydrocarbon content than that from the catalytic pyrolysis of particle board only. The hydrocarbons produced were mainly in the diesel range, highlighting the potential for the production of high-quality fuel.

36 MATERIALS SCIENCE↗

Facile synthesis of high surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions with the assistance of lauric acid and dodecylamine

Highlights: • High surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions are synthesized by a facile method. • Hydrophobic surfaces are obtained with the addition of lauric acid and dodecylamine in the synthesis. • The introduced lauric acid and dodecylamine are chemically adsorbed onto the surface of materials through a coordination effect. • Excellent thermal stability are obtained in lauric acid and dodecylamine assisted materials. - Abstract: Co-precipitation combined with the assistance of lauric acid and dodecylamine was used to synthesize high surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions (CZ-L and CZ-D). The promotion effects of lauric acid and dodecylamine were studied systematically by N{sub 2} adsorption-desorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-IR and Raman analysis. After being thermal aged at 1100 °C for 4 h in air, CZ-L and CZ-D present high surface areas of 26 m{sup 2}/g and 16 m{sup 2}/g, respectively. The results indicate that the added lauric acid and dodecylamine are chemically adsorbed onto the surface of materials through coordination effect. The obtained hydrophobic surface could greatly decrease the amount of superficial adsorbed water on the material and significantly reduce the surface tension. The addition of lauric acid and dodecylamine could also effectively support the network structures of the material and resist the collapse of pores upon drying and calcination.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Facile room temperature CTAB-assisted synthesis of mesoporous nano-cobalt ferrites for enhanced magnetic behaviour

Highlights: • Synthesis of mesoporous nano-cobalt ferrites are carried out CTAB medium. • Crystalline cobalt ferrite phase was formed below CMC of CTAB. • Bilayer arrangement of CTA-OH-Fe-Co growing units leads to inter-particle pores. • Enhanced magnetic properties (M{sub s} and H{sub c}) were obtained in synthesized cobalt ferrites. - Abstract: We report a facile, room temperature synthesis of nanostructured mesoporous cobalt ferrites using the cationic surfactant, cetyltrimethylammonium bromide (CTAB). The synthesis was carried out at various concentrations of CTAB ranging from its pre- to post-micellar concentrations. The pristine and calcined samples exhibit pure cobalt ferrite phase which are confirmed by XRD studies. The morphology of all uncalcined samples was quasi-spherical as shown by TEM images. Nitrogen adsorption – desorption study on pristine samples indicates the presence of mesopores in them. The magnetic properties of the uncalcined and calcined samples were studied by vibrating sample magnetometry. Coercivity and saturation magnetization were found to vary with the concentration of the CTAB employed. Also, the pristine samples were soft magnets, whereas the calcined samples tended towards exhibiting hard magnetism. We have proposed a mechanism to explain the mesoporosity of nanostructured ferrite based the role of CTAB in the present synthetic method.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

ZnO polymer composite based visible blind UV photo detector

Highlights: • The spherically shaped ZnO NPs with uniform size (∼40 nm) were synthesized. • Optical and the UV detection properties of polymer composites were measured. • ZnO-PVP sample has the potential as a material for visible blind photo detector. • Dielectric medium perturbs electron-phonon interaction and UV detection mechanism. - Abstract: Spherical ZnO nanoparticles with average diameter ∼50 nm are synthesized by hydrothermal method. Composites of the nanoparticles with different polymers have been prepared and UV detection properties are measured. The dielectric medium perturbs electron-phonon interaction as well as the optoelectronic properties. Moreover, the luminescence properties of the materials effected due to composite formation. In case of NP-polymer composite NPs are capped and there is negligible further adsorption and desorption of O{sub 2} molecules occurred on the surface. This increases the photocurrent as well as photosensitivity. For ZnO based photo detector, there is a small but not negligible photo response near 620 nm. The photo response in this particular wavelength is not observed in case of ZnO-PVP composite and it can be used as visible blind UV detector.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Highly effective methylated Ti MCM-41 catalyst for cyclohexene oxidation

Highlights: • Methylated TiMCM-41 materials are synthesized by direct room temperature stirring in 3 h of time using NH{sub 3} as a base instead of alkali metal hydroxide. • The synthesized materials are tested for the oxidation reaction of cyclohexene in the presence of H{sub 2}O{sub 2} as an oxidant. • Methylation improved the hydrophobicity of the catalytic active sites of TiMCM-41 materials. - Abstract: A series of Ti containing MCM-41 materials were synthesized with different Si/Ti molar ratios and tested for cyclohexene epoxidation reaction. TiMCM-41 with Si/Ti ratio 40 which gave maximum conversion and selectivity to epoxide was methylated with methyltriethoxysilane (MTES) in this reaction. Accordingly, four different methyl loading (5, 10, 15 and 20 mol % of MTES w.r.t. TEOS) TiMCM-41(Si/Ti 40) samples were prepared. The materials were characterized by different physical techniques such as PXRD, FT-IR spectroscopy, UV–vis DRS spectroscopy, N{sub 2} adsorption-desorption isotherm, SEM-EDX, TEM, TGA and ICP-OES. The catalysts were then tested for cyclohexene epoxidation reaction in the presence of H{sub 2}O{sub 2} avoiding TBHP. The conversion and selectivity for cyclohexene obtained with 10MeTiM-1 (Si/Ti 40) were found to be the best not only among the catalysts investigated in the present work, but also among all the catalysts studied so far for the reaction.

36 MATERIALS SCIENCE↗

Preparation of aluminum hydroxide and oxide nanostructures with controllable morphology by wet oxidation of AlN/Al nanoparticles

Highlights: • Aluminum hydroxide nanoparticles were synthesized by wet oxidation methods. • The oxidation conditions of AlN/Al affect the morphologies of the reaction products. • No changes in the synthesized materials morphology occurred up to 1000 °C. • The maxima specific surface areas for the nanostructures were achieved at 500 °C. - Abstract: A simple and environmentally friendly method to prepare aluminum oxyhydroxide and trihydroxide nanostructures by wet oxidation of AlN/Al composite nanoparticles was developed. The AlN/Al nanoparticles used were produced by electrical explosion of an aluminum wire in nitrogen atmosphere. The obtained nanostructures were characterized employing X-ray diffraction (XRD), transmission and high-resolution scanning electron microscopy (TEM and HRSEM), thermogravimetric analysis (TGA) and N{sub 2} adsorption-desorption technique (BET). By changing the wet oxidation conditions, aluminum hydroxides with different phase composition, morphology and texture characteristics were synthesized. After calcination at different temperatures, a range of transition and stable alumina nanostructures were obtained that preserved the morphology of the aluminum hydroxide precursors - agglomerated nanosheets, nanoplates or hexagonal nanorods, up to 1000 °C. Optimal process parameters for maximum surface area development for all the precursor materials have been established.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Cobalt containing microporous aluminohosphates as new photocatalyst for hydrogen generation under visible irradiation

Highlights: • AlPO-5 and AlPO-11, CoAlPO4-5 and CoAlPO4-11 were synthetized by hydrothermal method. • Cobalt modified AlPO shows photo-catalytic activity under visible light irradiation. • High activity for hydrogen evolution with CoAPO4-11photo-catalyst. • High specific surface area of CoAlPO increased the (e-/h+) pairs transfer. - Abstract: Novel photocatalytic materials based on cobalt type aluminophosphate molecular sieves have been elaborated by hydrothermal method. The photocatalytic activity of CoAlPO{sub 4}-5 and CoAlPO{sub 4}-11 were evaluated for hydrogen production via water reduction under visible irradiation. The synthesized materials were characterized thoroughly with respect to elemental analysis, XRD, SEM, FTIR, DR, BET and NH{sub 3} desorption measurement. Electrical conductivity, photo-electrochemical measurements were also studied. Since AlPO{sub 4} materials possess a unique chemical composition as well as structural and micro-morphological characteristics. The photocatalysts have shown a remarkable surface area ∼ 183 and 258 m{sup 2} g{sup −1} which lead to a better acceleration of the charge (e-/h{sup +}) transfer by increasing the number of surface reaction sites. Under visible light, the photocatalysts exhibited a good photo-reactivity for hydrogen production with a yield of 64 and 1260 μmol g{sup −1} min{sup −1} for CoAlPO{sub 4}-5 and CoAlPO{sub 4}-11, respectively.

36 MATERIALS SCIENCE↗

Intramesoporous Silica Structure Differentiating Protein Loading Density

We report that hydrothermal aging temperature had a critical effect on intramesoporous structure of mesoporous silica and thus the intramesoporous structure affected protein loading in the mesoporous silica significantly. For a neutral protein Immunoglobulin G with a Y-like molecular shape, the larger desorption pore size allowed the larger protein loading. For a charged protein glucose oxidase with an elliptical molecular shape, the larger surface area resulted in the larger protein loading. Fluorescence emission spectra from tyrosinyl and tryptophanyl residues of the proteins in mesoporous silicas indicated that the charged protein was electrostatically attached inside the mesopores in a way of monolayer, while the neutral protein IgG could continue to aggregate after the monolayer occupancy.

59 BASIC BIOLOGICAL SCIENCES↗

Cr plasma-material-interaction in PISCES-RF: D thermal release, retention, and erosion

Pure chromium (Cr) targets were exposed to high-flux deuterium (D) plasmas in the Pisces-RF linear plasma device, and measurements of D retention, release, and erosion were subsequently performed. Post-exposure D retention was quantified using temperature-programmed desorption on Cr targets irradiated by 50 eV ions over a broad range of exposure temperatures (423–873 K) and ion fluences (3 × 10 24 – 3 × 10 26 m −2 ). The retained D inventory was observed to decrease rapidly with increased exposure temperature, from approximately ∼7 × 10 20 m −2 at ∼ 420 K, to then saturate near ∼ 10 20 m −2 for exposure temperatures above ∼550 K. Separately, at fixed exposure temperature (∼450 K), D retention was found to have only a weak dependence on increasing ion fluence. Lastly, the erosion of Cr in D plasma was investigated for ion impact energies in the range 40 ≤ E i ≤ 250 eV. Erosion was inferred using optical emission spectroscopy (OES) from the ratio of emission lines (Cr I (425.4 nm)/D I (656.1 nm)) measured close to the target. Conversion of the OES yield data to net erosion yield was made with singular ion energy target mass-loss measurements. These net erosion yield data were then further corrected to obtain gross erosion yield by accounting for a re-deposition factor, computed using a simple model. The gross erosion yield is found to be 2–4 times lower than predicted by SDTrimSP, consistent with that typically observed for light-ion sputtering under high-flux plasma conditions.

Chromium↗