Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “complex systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

An Imaging Infrared (IIR) seeker using a microprogrammed processor

A recently developed Imaging Infrared Seeker uses a microprogrammed processor to perform gimbal servo control and system interface while performing the seeker functions of automatic target detection, acquisition, and tracking. The automatic detection mode requires up to 80% of the available capability of a high performance microprogrammed processor. Although system complexity was increased significantly, this approach can be cost effective when the basic computation capacity is already available.

Richmond, K. V.↗

Development of Boolean calculus and its applications

The development of Boolean calculus for its application to developing digital system design methodologies that would reduce system complexity, size, cost, speed, power requirements, etc., is discussed. Synthesis procedures for logic circuits are examined particularly asynchronous circuits using clock triggered flip flops.

Tapia, M. A.↗

The Lewis Chemical Equilibrium Program with parametric study capability

The program was developed to determine chemical equilibrium in complex systems. Using a free energy minimization technique, the program permits calculations such as: chemical equilibrium for assigned thermodynamic states; theoretical rocket performance for both equilibrium and frozen compositions during expansion; incident and reflected shock properties; and Chapman-Jouget detonation properties. It is shown that the same program can handle solid coal in an entrained flow coal gasification problem.

Sevigny, R.↗

Low thrust chemical orbit to orbit propulsion system propellant management study

Low thrust chemical propulsion systems were sized for transfer of large space systems from LEO to GEO. The influence of propellant combination, tankage and insulation requirements, and propellant management techniques on the LTPS mass and volume were studied. Liquid oxygen combined with hydrogen, methane or kerosene were the propellant combinations. Thrust levels of 445, 2230, and 4450 N were combined with 1, 4 and 8 perigee burn strategies. This matrix of systems was evaluated using multilayer insulation and spray-on-foam insulation systems. Various combinations of toroidal, cylindrical with ellipsoidal domes, and ellipsoidal tank shapes were investigated. Results indicate that low thrust (445 N) and single perigee burn approaches are considerably less efficient than the higher thrust level and multiple burn strategies. A modified propellant settling approach minimized propellant residuals and decreased system complexity, in addition, the toroid/ellipsoidal tank combination was predicted to be shortest.

Dergance, R. H.↗

Attitude and articulation control solutions for Project Galileo

Design problems and the solutions adopted for them in the attitude and articulation control subsystem for the Galileo spacecraft are discussed as an illustration of the application of dual-spin control to an interplanetary spacecraft. Following a review of the baseline design of the Galileo system and mission, consideration is given to problems encountered in the areas of autonomous attitude determination, attitude control, spacecraft dynamics and software margins. Design issues raised by subsequent changes in spacecraft configuration are also indicated. It is pointed out that although difficulties associated with control system complexity in a dual-spin interplanetary spacecraft have been satisfactorily resolved for the Galileo mission, the future application of dual spin in interplanetary flight is in doubt.

Rasmussen, R. D.↗

A Markov chain model for reliability growth and decay

A mathematical model is developed to describe a complex system undergoing a sequence of trials in which there is interaction between the internal states of the system and the outcomes of the trials. For example, the model might describe a system undergoing testing that is redesigned after each failure. The basic assumptions for the model are that the state of the system after a trial depends probabilistically only on the state before the trial and on the outcome of the trial and that the outcome of a trial depends probabilistically only on the state of the system before the trial. It is shown that under these basic assumptions, the successive states form a Markov chain and the successive states and outcomes jointly form a Markov chain. General results are obtained for the transition probabilities, steady-state distributions, etc. A special case studied in detail describes a system that has two possible state ('repaired' and 'unrepaired') undergoing trials that have three possible outcomes ('inherent failure', 'assignable-cause' 'failure' and 'success'). For this model, the reliability function is computed explicitly and an optimal repair policy is obtained.

Siegrist, K.↗

Calculations of reliability predictions for the Apollo spacecraft

A new method of reliability prediction for complex systems is defined. Calculation of both upper and lower bounds are involved, and a procedure for combining the two to yield an approximately true prediction value is presented. Both mission success and crew safety predictions can be calculated, and success probabilities can be obtained for individual mission phases or subsystems. Primary consideration is given to evaluating cases involving zero or one failure per subsystem, and the results of these evaluations are then used for analyzing multiple failure cases. Extensive development is provided for the overall mission success and crew safety equations for both the upper and lower bounds.

Amstadter, B. L.↗

A scheme for handling arrays in data-flow systems

An examination of the effects of atomicity (higher resolution) on the performance of array processors (data-flow computers) is presented. Data-flow principles are reviewed, noting the reliance on parallel processing using functional languages to specify sequencing of the operations. Techniques are described for eliminating the necessity of copying whole arrays between processing steps, thereby reducing the number of store cycles. The method involves setting whole columns to specific values rather than individual elements. The individual column values can be processed in parallel, i.e., a locally optimized condition exists. A drawback of the system is the need for more low level arguments, to identify the appropriate processing sequences, and high system complexity.

Gaudiot, J.-L.↗

A new dimension in space experimentation

Based on the Space Shuttle's ability to place the Long Duration Exposure Facility (LDEF) in space and later retrieve it, a new opportunity for scientific exploration in space is studied. The LDEF which is scheduled to be placed in orbit in 1984 and returned to earth after one year in space is described. It is a large unmanned facility 9 m in length and 4 m in diameter and flying at an 482 km orbit. It is pointed out that the LDEF allows investigators to have their experiments returned to them for in-depth analysis, eliminates the need for complex systems to transmit data to earth, does not require propulsion equipment, and increases the kinds of experiments that can be performed. A description is given for each of the five categories of the experiments provided by the LDEF: (1) evaluation of the impact of space environments on materials used for thermal coatings on polymer-matrix composites, on optics, and on quartz-crystal oscillators; (2) experiments with unique heat pipe systems having the goal to achieve temperature control of + or - 6 F; (3) evaluation of solar array materials; (4) growth of single crystals of lead sulfite, calcium carbonate, and synthetic metals; and (5) scientific experiments to determine the chemistry of micrometeoroids and to identify isotopes in interstellar gas and ultra-heavy cosmic ray nuclei. Finally, the project SEEDS (Space Exposed Experiment Developed for Students) which experiments with tomato seeds behavior in zero gravity is discussed.

Sandy, M. L.↗

Advanced nickel-hydrogen cell configuration study

Three nickel hydrogen battery designs, individual pressure vessel (IPV), common pressure vessel (CPV), and a bipolar battery module were studied. Weight, system complexity and cost were compared for a satellite operating in a 6 hour, 5600 nautical mile orbit. The required energy storage is 52 kWh. A 25% improvement in specific energy is observed by employing a bipolar battery versus a battery comprised of hundreds of IPV's. Further weight benefits are realized by the development of light weight technologies in the bipolar design.

Adler, E.↗

The Interaction of Global Biochemical Cycles

The global biosphere in an exceedingly complex system. To gain an understanding of its structure and dynamic features, it is necessary not only to increase the knowledge about the detailed processes but also to develop models of how global interactions take place. Attempts to analyze the detailed physical, chemical and biological processes in this context need to be guided by an advancement of understanding of the latter. It is necessary to develop a strategy of data gathering that severs both these purposes simultaneously. The following papers deal with critical aspects in the global cycles of carbon, nitrogen, phosphorus and sulfur in details as well as the cycle of water and the flow of energy in the Earth's environment. The objective is to set partly the foundation for the development of mathematical models that allow exploration of the coupled dynamics of the global cycles of carbon, nitrogen, phosphorus, sulfur, as well as energy and water flux.

Moore, B., III↗

Global biogeochemical cycles: Studies of interaction and change, some views on the strategy of approach

The global biosphere is an exceedingly complex system. To gain an understanding of its structure and dynamic features, it is necessary to increase knowledge about the detailed processes, but also to develop models of how global interactions take place. Attempts to analyze the detailed physical, chemical and biological processes need, in this context, to be guided by an advancement of understanding of the latter. It is necessary to develop a strategy of data gathering that serves both these purposes simultaneously. climate research during the last decade may serve as a useful example of how to approach this difficult problem in a systematic way. Large programs for data collection may easily become rigid and costly. While realizing the necessity of a systematic and long lasting effort of observing the atmosphere, the oceans, land and life on Earth, such a program must remain flexible enough to permit the modifications and even sometimes improvisations that are necessary to maintain a viable program.

Bolin, B.↗

Quantitative analysis in megageomorphology

Megageomorphology is the study of regional topographic features and their relations to independent geomorphic variables that operate at the regional scale. These independent variables can be classified as either tectonic or climatic in nature. Quantitative megageomorphology stresses the causal relations between plate tectonic factors and landscape features or correlations between climatic factors and geomorphic processes. In addition, the cumulative effects of tectonics and climate on landscape evolution that simultaneously operate in a complex system of energy transfer is of interst. Regional topographic differentiation, say between continents and ocean floors, is largely the result of the different densities and density contrasts within the oceanic and continental lithosphere and their isostatic consequences. Regional tectonic processes that alter these lithospheric characteristics include rifting, collision, subduction, transpression and transtension.

Mayer, L.↗

Optimal cooperative control synthesis of active displays

The utility of augmenting displays to aid the human operator in controlling high order complex systems is well known. Analytical evaluations of various display designs for a simple k/s-squared plant in a compensatory tracking task using an Optimal Control Model (OCM) of human behavior is carried out. This analysis reveals that significant improvement in performance should be obtained by skillful integration of key information into the display dynamics. The cooperative control synthesis technique previously developed to design pilot-optimal control augmentation is extended to incorporate the simultaneous design of performance enhancing augmented displays. The application of the cooperative control synthesis technique to the design of augmented displays is discussed for the simple k/s-squared plant. This technique is intended to provide a systematic approach to design optimally augmented displays tailored for specific tasks.

Garg, S.↗

Program for Experimentation With Expert Systems

CERBERUS is forward-chaining, knowledge-based system program useful for experimentation with expert systems. Inference-engine mechanism performs deductions according to user-supplied rule set. Information stored in intermediate area, and user interrogated only when no applicable data found in storage. Each assertion posed by CERBERUS answered with certainty ranging from 0 to 100 percent. Rule processor stops investigating applicable rules when goal reaches certainty of 95 percent or higher. Capable of operating for wide variety of domains. Sample rule files included for animal identification, pixel classification in image processing, and rudimentary car repair for novice mechanic. User supplies set of end goals or actions. System complexity decided by user's rule file. CERBERUS written in FORTRAN 77.

Engle, S. W.↗

Government-to-government cooperation in space station development

A memoranda of understanding was recently signed between the United States (NASA) and three international Space Station partners - Canada, European Space Agency (ESA), and Japan. The international partners are performing parallel Phase B preliminary design studies, concurrent with the U.S., on their proposed elements/systems for possible integration and operation with the U.S. Space Station System complex. During the 21-month Space Station Phase B study, a large amount of technical interface data will have to be transferred between the U.S. and the international partners. Scheduled bilateral technical coordination meetings will also be held. The coordination and large number of interfaces required to integrate the international requirements into the Space Station require a clean interface management organizational structure and operation procedures to accomplish the integration task. The international coordination management organizational structure, management tools, and communications network are discussed including the proposed international elements/systems being studied by the international partners.

Nassiff, S. H.↗

Proceedings of the Ninth Annual Software Engineering Workshop

Experiences in measurement, utilization, and evaluation of software methodologies, models, and tools are discussed. NASA's involvement in ever larger and more complex systems, like the space station project, provides a motive for the support of software engineering research and the exchange of ideas in such forums. The topics of current SEL research are software error studies, experiments with software development, and software tools.

Source record↗

Optimal cooperative control synthesis of active displays

The utility of augmenting displays to aid the human operator in controlling high order complex systems is well known. Analytical evaluation of various display designs for a simple k/s sup 2 plant in a compensatory tracking task using an optimal Control Model (OCM) of human behavior is carried out. This analysis reveals that significant improvement in performance should be obtained by skillful integration of key information into the display dynamics. The cooperative control synthesis technique previously developed to design pilot-optimal control augmentation is extended to incorporate the simultaneous design of performance enhancing augmented displays. The application of the cooperative control synthesis technique to the design of augmented displays is discussed for the simple k/s sup 2 plant. This technique is intended to provide a systematic approach to design optimally augmented displays tailored for specific tasks.

Garg, S.↗