Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Using Calibrated Sodium Data for Preliminary Validation of the SRT Code for Advanced Reactors

Various types of non-light water reactors are currently engaged in the U.S. licensing process. Because of inherent differences compared with well-established large light water reactors, appropriate assessment tools are needed. Specifically, source term analysis, which determines environmental dose impacts from potential accident scenarios, is a crucial part of design and licensing. The U.S. Nuclear Regulatory Commission has emphasized the importance of mechanistic source term analysis for advanced reactor deployments. To align with these needs, Argonne National Laboratory has developed the Simplified Radionuclide Transport (SRT) source term analysis code for metal fuel Sodium-cooled Fast Reactors (SFRs) and microreactors. SRT conducts time-dependent radionuclide transport and retention in SFRs for core and ex-core radionuclide source accident sequences. The main objective of SRT is to provide rapid sensitivity and uncertainty analyses, incorporating parametric uncertainties and summarizing probabilistic results. As part of the code validation process, a study focused on the bubble scrubbing module was performed using an experiment recently carried out by the University of Wisconsin-Madison. Based on the analysis, the modeling approach in SRT provides accurate results for small and large aerosols, while slight underprediction of radionuclide aerosol removal are observed for medium sized aerosols. However, the deviation is minor, considering the highly uncertain phenomenon and range of results, and is in the conservative direction. In addition, uncertainty information derived from the experiments is further implemented, reflecting the actual span of parameters, which leads to enhanced agreement with code predictions. The results demonstrate that SRT provides reasonable predictions for the bubble scrubbing process in sodium pool.

Kam, Dong Hoon↗

Two-Sided Coded Aperture Imaging Without a Detector Plane

We introduce a novel design for a two-sided, coded-aperture, gamma-ray imager suitable for use in stand off detection of orphan radioactive sources. The design is an extension of an active-mask imager that would have three active planes of detector material, a central plane acting as the detector for two (active) coded-aperture mask planes, one on either side of the detector plane. In the new design the central plane is removed and the mask on the left (right) serves as the detector plane for the mask on the right (left). This design reduces the size, mass, complexity, and cost of the overall instrument. In addition, if one has fully position-sensitive detectors, then one can use the two planes as a classic Compton camera. This enhances the instrument's sensitivity at higher energies where the coded-aperture efficiency is decreased by mask penetration. A plausible design for the system is found and explored with Monte Carlo simulations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

ATR PDQ and MCWO Fuel Burnup Analysis Codes Evaluation

The Advanced Test Reactor (ATR) at the Idaho National Laboratory (INL) is being studied to determine the feasibility of converting it from the highly enriched Uranium (HEU) fuel that is currently uses to low enriched Uranium (LEU) fuel. In order to achieve this goal, it would be best to qualify some different computational methods than those that have been used at ATR for the past 40 years. This paper discusses two methods of calculating the burnup of ATR fuel elements. The existing method, that uses the PDQ code, is compared to a modern method that uses A General Monte Carlo N-Particle Transport Code (MCNP) combined with the Origen2.2 code. This modern method, MCNP with ORIGEN2.2 (MCWO), is found to give excellent agreement with the existing method (PDQ). Both of MCWO and PDQ are also in a very good agreement to the 235U burnup data generated by an analytical method.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Definite Integrals, Some Involving Residue Theory Evaluated by Maple Code

The calculus of residue is applied to evaluate certain integrals in the range (-{infinity} to {infinity}) using the Maple symbolic code. These integrals are of the form {integral}{sub -{infinity}}{sup {infinity}} cos(x)/[(x{sup 2} + a{sup 2})(x{sup 2} + b{sup 2}) (x{sup 2} + c{sup 2})]dx and similar extensions. The Maple code is also applied to expressions in maximum likelihood estimator moments when sampling from the negative binomial distribution. In general the Maple code approach to the integrals gives correct answers to specified decimal places, but the symbolic result may be extremely long and complex.

97 MATHEMATICS AND COMPUTING↗

HTGR Reactor Physics and Burnup Calculations Using the Serpent Monte Carlo Code

One of the main advantages of the continuous-energy Monte Carlo method is its versatility and the capability to model any fuel or reactor configuration without major approximations. This capability becomes particularly valuable in studies involving innovative reactor designs and next-generation systems, which often lie beyond the capabilities of deterministic LWR transport codes. In this study, a conceptual prismatic HTGR fuel assembly was modeled using the Serpent Monte Carlo reactor physics burnup calculation code, under development at VTT Technical Research Centre of Finland since 2004. A new explicit particle fuel model was developed to account for the heterogeneity effects. The results are compared to other Monte Carlo and deterministic transport codes and the study also serves as a test case for the modules and methods in SCALE 6.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Code for multi-shape Gaussian process (GP) fitting with uncertainty quantification (UQ)

This is code associated with the publication “Nonparametric Multi-shape Modeling with Uncertainty Quantification,” authored by Hengrui Luo (Lawrence Berkeley National Laboratory) and Justin Strait (Los Alamos National Laboratory). The code is used to fit multiple-output Gaussian process (GP) models of planar closed curves to collections of ordered point sets, allowing for flexible nonlinear prediction of the underlying curve under dense or sparse point set samplings and with or without noise, as well as tractable uncertainty quantification. To do this, we employ use of a periodic kernel to account for the nonlinear input space of closed curves, and combine with coregionalization models to account for dependence both (i) between curve coordinates, and (ii) between pairs of curves. Functions in the code are capable of fitting these models, as well as performing additional tasks with the fitted curves such as (a) shape registration and alignment, (b) shape averaging, and (c) fitting for curve sub-populations / clusters.

Strait, Justin↗

Python codes for the paper - "Trade-offs in the latent representation of microstructure evolution"

SAND2024-00946O Python codes used in "Trade-offs in the latent representation of microstructure evolution," a manuscript accepted for publication in Acta Materialia, are part of a repository. The code was developed to perform analysis of microstructure evolution. The repository consists of two main directories: models, which train and test models such as autoencoders and diffusion maps, and analysis, which analyzes microstructures. Source code is used to perform dimensionality reduction of microstructure data for analysis of its evolution in time. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Dingreville, Remi↗

Special issue: Advanced stencil-code engineering

Here, stencil codes are compute-intensive algorithms, in which data points arranged in a large grid are being recomputed repeatedly from the values of data points in a predefined neighborhood. This fixed neighborhood pattern is called a stencil. Stencils codes see wide-spread use in computing the discrete solutions of partial differential equations and systems composed of such equations.

97 MATHEMATICS AND COMPUTING↗

The global version of the gyrokinetic turbulence code GENE

The understanding and prediction of transport due to plasma microturbulence is a key open problem in modern plasma physics, and a grand challenge for fusion energy research. Ab initio simulations of such small-scale, low-frequency turbulence are to be based on the gyrokinetic equations, a set of nonlinear integro-differential equations in reduced (five-dimensional) phase space. In the present paper, the extension of the well-established and widely used gyrokinetic code GENE [F. Jenko, W. Dorland, M. Kotschenreuther, B.N. Rogers, Electron temperature gradient driven turbulence, Phys. Plasmas 7 (2000) 1904-1910] from a radially local to a radially global (nonlocal) version is described. The necessary modifications of both the basic equations and the employed numerical methods are detailed, including, e.g., the change from spectral methods to finite difference and interpolation techniques in the radial direction and the implementation of sources and sinks. In addition, code verification studies and benchmarks are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electromagnetic Modelling of Dielectric Loads in front of an ICRH ITER Array using TOPICA and HFSS codes for comparison

The antenna scattering (S-matrix) or impedance matrix at location where the antenna is connected to the power system is of crucial importance to assess compliance with power handling requirements and to design the tuning-and-matching system. The electrical behaviour of an Ion Cyclotron Resonance Heating (ICRH) ITER antenna in front of an infinite isotropic load was assessed numerically using the HFSSR and TOPICA codes for comparison. The calculations were performed at 45 MHz, for various thicknesses of the vacuum layer, various relative permittivities {epsilon}' for dielectric medium without losses ({epsilon}'' = 0),{epsilon}' ranging from 81 to 1000 and for various conductive losses {epsilon}'' = {sigma}/{epsilon}{sub 0}{center_dot}{omega}, for electrolyte medium ({epsilon}' = 81),{epsilon}'' ranging from 0 to 1000. The numerical results obtained with TOPICA and HFSS codes show a good overall agreement in case of vacuum, dielectric and electrolyte mediums. The best absorption of the fast magneto-sonic (Alfven) waves into the loads (i.e. the minimum of the module of antenna input reflection coefficient S11) is obtained around {epsilon}' = 400 for dielectric medium and around {epsilon}'' = 400 for electrolyte case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Application of 3D Code IBSimu for Designing an H{sup -}/D{sup -} Extraction System for the Texas A and M Facility Upgrade

A three dimensional ion optical code IBSimu is being developed at the University of Jyvaeskylae. So far the plasma modelling of the code has been restricted to positive ion extraction systems, but now a negative ion plasma extraction model has been added. The plasma model has been successfully validated with simulations of the Spallation Neutron Source (SNS) ion source extraction both in cylindrical symmetry and in full 3D, also modelling electron beam dumping and ion beam tilt. A filament-driven multicusp ion source has been installed at the Texas A and M University Cyclotron Institute for production of H{sup -} and D{sup -} beams as a part of the facility upgrade. The light ion beams, produced by the ion source, are accelerated with the K150 cyclotron for production and reacceleration of rare isotopes. The extraction system for the ion source was designed with IBSimu. The extraction features a water-cooled puller electrode with a permanent magnet dipole field for dumping the co-extracted electrons and a decelerating Einzel lens for adjusting the beam focusing for further beam transport. The ion source and the puller electrode are tilted at 4 degree angle with respect to the beam line. The extraction system can handle H{sup -} and D{sup -} beams with final beam energies from 5 keV to 15 keV using the same geometry, only adjusting the electrode voltages. So far, 24 {mu}A of H{sup -} and 15 {mu}A of D{sup -} have been extracted from the cyclotron.

43 PARTICLE ACCELERATORS↗

Spacecraft charging analysis with the implicit particle-in-cell code iPic3D

We present the first results on the analysis of spacecraft charging with the implicit particle-in-cell code iPic3D, designed for running on massively parallel supercomputers. The numerical algorithm is presented, highlighting the implementation of the electrostatic solver and the immersed boundary algorithm; the latter which creates the possibility to handle complex spacecraft geometries. As a first step in the verification process, a comparison is made between the floating potential obtained with iPic3D and with Orbital Motion Limited theory for a spherical particle in a uniform stationary plasma. Second, the numerical model is verified for a CubeSat benchmark by comparing simulation results with those of PTetra for space environment conditions with increasing levels of complexity. In particular, we consider spacecraft charging from plasma particle collection, photoelectron and secondary electron emission. The influence of a background magnetic field on the floating potential profile near the spacecraft is also considered. Although the numerical approaches in iPic3D and PTetra are rather different, good agreement is found between the two models, raising the level of confidence in both codes to predict and evaluate the complex plasma environment around spacecraft.

42 ENGINEERING↗

Development and validation of non-axisymmetric heat flux simulations with 3D fields using the HEAT code

A new comprehensive module to simulate heat fluxes from three-dimensional (3D) magnetic fields has been implemented in the HEAT code. Especially compact tokamaks like SPARC require tools to predict and manage large heat fluxes. Existing release versions of HEAT can only simulate axisymmetric heat flux on 3D plasma facing components. The new module uses an M3D-C1 perturbed equilibrium and the MAFOT code to trace field lines of the perturbed 3D magnetic field. Heat flux is then assigned to the resulting footprints via a 3D layer model. The model distinguishes between the scrape-off layer, the magnetic lobes and the private flux region, and employs only 0D parameters like the layer width, diffusive spread and the last closed flux surface position in the perturbed edge to generate a heat flux profile. The magnitude is normalized to the total input power. Resulting heat flux simulations are compared and validated against infrared measurements in the DIII-D tokamak with applied 3D fields; good agreement is found for several cases. The new module can now be applied to the SPARC tokamak; a preliminary result for applied rotating 3D fields is shown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Admiralty Inlet Advanced Turbulence Measurements: Final Data and Code Archive

Data and code that is not already in a public location that is used in Kilcher, Thomson, Harding, and Nylund (2017) "Turbulence Measurements from Compliant Moorings - Part II: Motion Correction" doi: 10.1175/JTECH-D-16-0213.1. The links point to Python source code used in the publication. All other files are source data used in the publication.

16 TIDAL AND WAVE POWER↗

Determination for the 2006 International Energy Conservation Code, Residential Buildings – Technical Support Document

Provides a technical analysis showing that the 2006 International Energy Conservation Code contains improvements in energy efficiency compared to its predecessor, the 2003 International Energy Conservation Code. DOE is required by law to issue "determinations" of whether or not new editions of the IECC improve energy efficiency.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Energy Savings Analysis of the Proposed Revision of the Washington D.C. Non-Residential Energy Code

This report presents the results of an assessment of savings for the proposed Washington D.C. energy code relative to ASHRAE Standard 90.1-2010. It includes annual and life cycle savings for site energy, source energy, energy cost, and carbon dioxide emissions that would result from adoption and enforcement of the proposed code for newly constructed buildings in Washington D.C. over a five year period.

Commercial Energy Code↗

Optimizing Nuclear Physics Codes on the XT5

Scientists studying the structure and behavior of the atomic nucleus require immense high-performance computing resources to gain scientific insights. Several nuclear physics codes are capable of scaling to more than 100,000 cores on Oak Ridge National Laboratory's petaflop Cray XT5 system, Jaguar. In this paper, we present our work on optimizing codes in the nuclear physics domain.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗