Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cloud boundaries”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Supersaturation Variability from Scalar Mixing: Evaluation of a New Subgrid-Scale Model Using Direct Numerical Simulations of Turbulent Rayleigh–Bénard Convection

We report that supersaturation fluctuations in the atmosphere are critical for cloud processes. A nonlinear dependence on two scalars - water vapor and temperature - leads to different behavior than single scalars in turbulent convection. For modeling such multiscalar processes at subgrid scales (SGS) in large-eddy simulations (LES) or convection-permitting models, a new SGS scheme is implemented in CM1 that solves equations for SGS water vapor and temperature fluctuations and their covariance. The SGS model is evaluated using benchmark direct-numerical simulations (DNS) of turbulent Rayleigh–Bénard convection with water vapor as in the Michigan Tech Pi Cloud Chamber. This idealized setup allows thorough evaluation of the SGS model without complications from other atmospheric processes. DNS results compare favorably with measurements from the chamber. Results from LES using the new SGS model compare well with DNS, including profiles of water vapor and temperature variances, their covariance, and supersaturation variance. SGS supersaturation fluctuations scale appropriately with changes to the LES grid spacing, with the magnitude of SGS fluctuations decreasing relative to those at the resolved scale as the grid spacing is decreased. Sensitivities of covariance and supersaturation statistics to changes in water vapor flux relative to thermal flux are also investigated by modifying the sidewall conditions. Relative changes in water vapor flux substantially decrease the covariance and increase supersaturation fluctuations even away from boundaries.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Biomass burning aerosol transport and vertical distribution over the South African-Atlantic region

Optically thick smoke aerosol plumes originating from biomass burning (BB) in the southwestern African Savanna during the austral spring are transported westward by the free tropospheric winds to primarily overlie vast stretches of stratocumulus cloud decks in the southeast Atlantic. In this work, we evaluated the simulations of long-range transport of BB aerosol by the Goddard Earth Observing System (GEOS-5) and four other global aerosol models over the complete South African-Atlantic region using Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) observations to find any distinguishing or common model biases. Models, in general, captured the vertical distribution of aerosol over land but exhibited some common features after long-range transport of smoke plumes that were distinct from that of CALIOP. Most importantly, the model-simulated BB aerosol plumes quickly descend to lower levels just off the western coast of the continent, while CALIOP data suggest that smoke plumes continue their horizontal transport at elevated levels above the marine boundary layer. This is crucial because the sign of simulated aerosol semidirect effect can change depending on whether the bulk of the absorbing aerosols is present within or above the cloud levels in a model. The levels to which the aerosol plumes get subsided and the steepness of their descent vary amongst the models and amongst the different subregions of the domain. Investigations into possible causes of differences between GEOS-5 and CALIOP aerosol transport over the ocean revealed a minimal role of aerosol removal process representation in the model as opposed to model dynamics.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

An LES Survey of Cold-Air Outbreaks Spanning ACTIVATE and COMBLE

Two recent field campaigns offer unique new opportunities to survey coupled aerosol and cloud processes operating within cold-air outbreaks (CAOs). NASA's 2019-2023 Aerosol Cloud meTeorology Interactions oVer the western Atlantic Experiment (ACTIVATE) project provided airborne in situ and remote sensing observations in multiple CAOs off the central US Eastern Seaboard. Contemporaneously, DOE's 2019-2020 Cold-air Outbreaks in the Marine Boundary Layer Experiment (COMBLE) provided continuous ground-based in situ and remote sensing measurements during hundreds of hours of CAO conditions at two sites flanking the Norwegian Sea. Here we highlight lessons learned from contrasting sets of aerosol-aware Lagrangian large-eddy simulation case studies derived from each campaign, as well as outstanding uncertainties. Cases simulated include all of the most extensively sampled CAO flights during ACTIVATE, and a wide range of CAO strengths and mesoscale structures during COMBLE. Each case study is also suitable for simulation with large-scale models in single-column model mode or with a limited-domain approach using periodic boundary conditions. We seek to address the central question: what microphysical process pathways control the Lagrangian evolution of surface and top-of-atmosphere radiative fluxes under ACTIVATE and COMBLE conditions? Many science team members, co-investigators, and collaborators will be gratefully acknowledged in association with their contributions to making this work possible.

cold-air outbreaks↗
NASA NTRS2005

A New Approach to using a Cloud-Resolving Model to Study the Interactions between Clouds, Precipitation and Aerosols

Numerical cloud models, which are based the non-hydrostatic equations of motion, have been extensively applied to cloud-scale and mesoscale processes during the past four decades. Because cloud-scale dynamics are treated explicitly, uncertainties stemming from convection that have to be parameterized in (hydrostatic) large-scale models are obviated, or at least mitigated, in cloud models. Global models will use the non-hydrostatic framework when their horizontal resolution becomes about 10 kilometers, the theoretical limit for the hydrostatic approximation. This juncture will be reached one to two decades from now. Over the past generation, voluminous datasets on atmospheric convection have been accumulated from radar, instrumented aircraft, satellites, and rawinsonde measurements in field campaigns, enabling the detailed evaluation of models. Improved numerical methods have resulted in more accurate and efficient dynamical cores in models. Improvements have been made in the parameterizations of microphysical processes, radiation, boundary-layer effects, and turbulence; however, microphysical parameterizations remain a major source of uncertainty in all classes of atmospheric models. In recent years, exponentially increasing computer power has extended cloud-resolving-model integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial 1-kilometer scales are resolved in horizontal domains as large as 10,000 kilometers in two dimensions, and 1,000 x 1,000 square kilometers in three-dimensions. Cloud models now provide statistical information useful for developing more realistic physically-based parameterizations for climate models and numerical weather prediction models. A review of developments and applications of cloud models in the past, present and future will be presented in this talk. In particular, a new approach to using cloud-resolving models to study the interactions between clouds, precipitation and aerosols will be presented.

Tao, Wei-Kuo↗
NASA NTRS2005

A New Approach to Using a Cloud-resolving Model to Study the Interactions Between Clouds, Precipitation and Aerosols

Numerical cloud models, which are based the non-hydrostatic equations of motion, have been extensively applied to cloud-scale and mesoscale processes during the past four decades. Because cloud-scale dynamics are treated explicitly, uncertainties stemming from convection that have to be parameterized in (hydrostatic) large-scale models are obviated, or at least mitigated, in cloud models. Global models will use the non-hydrostatic framework when their horizontal resolution becomes about 10 km, the theoretical limit for the hydrostatic approximation. This juncture will be reached one to two decades from now. Over the past generation, voluminous datasets on atmospheric convection have been accumulated from radar, instrumented aircraft, satellites, and rawinsonde measurements in field campaigns, enabling the detailed evaluation of models. Improved numerical methods have resulted in more accurate and efficient dynamical cores in models. Improvements have been made in the parameterizations of microphysical processes, radiation, boundary-layer effects, and turbulence; however, microphysical parameterizations remain a major source of uncertainty in all classes of atmospheric models. In recent years, exponentially increasing computer power has extended cloud-resolving-model integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial 1-km scales are resolved in horizontal domains as large as l0,OOO km in two-dimensions, and 1,OOO x 1,OOO km2 in three-dimensions. Cloud models now provide statistical information useful for developing more realistic physically-based parameterizations for climate models and numerical weather prediction models. A review of developments and applications of cloud models in the past, present and future will be presented in this talk. In particular, a new approach to using cloud-resolving models to study the interactions between clouds, precipitation and aerosols will be presented.

Tao, Wei-Kuo↗
NASA NTRS2005

A New Approach to using a Cloud-Resolving Model to Study the Interactions between Clouds, Precipitation and Aerosols

Numerical cloud models, which are based the non-hydrostatic equations of motion, have been extensively applied to cloud-scale and mesoscale processes during the past four decades. Because cloud-scale dynamics are treated explicitly, uncertainties stemming from convection that have to be parameterized in (hydrostatic) large-scale models are obviated, or at least mitigated, in cloud models. Global models will use the non-hydrostatic framework when their horizontal resolution becomes about 10 km, the theoretical limit for the hydrostatic approximation. This juncture will be reached one to two decades from now. Over the past generation, voluminous datasets on atmospheric convection have been accumulated from radar, instrumented aircraft, satellites, and rawinsonde measurements in field campaigns, enabling the detailed evaluation of models. Improved numerical methods have resulted in more accurate and efficient dynamical cores in models. Improvements have been made in the parameterizations of microphysical processes, radiation, boundary-layer effects, and turbulence; however, microphysical parameterizations remain a major source of uncertainty in all classes of atmospheric models. In recent years, exponentially increasing computer power has extended cloud-resolving-model integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial 1-km scales are resolved in horizontal domains as large as 10,000 km in two-dimensions, and 1,000 x 1,000 square kilometers in three-dimensions. Cloud models now provide statistical information useful for developing more realistic physically-based parameterizations for climate models and numerical weather prediction models. A review of developments and applications of cloud models in the past, present and future will be presented in this talk. In particular, a new approach to using cloud-resolving models to study the interactions between clouds, precipitation and aerosols will be presented.

Tao, Wei-Kuo↗
NASA NTRS2006

Using Multi-scale Modeling System to Study the Interactions between Clouds, Precipitation, Aerosols, Radiation and Land Surface

Numerical cloud models, which are based the non-hydrostatic equations of motion, have been extensively applied to cloud-scale and mesoscale processes during the past four decades. Because cloud-scale dynamics are treated explicitly, uncertainties stemming from convection that have to be parameterized in (hydrostatic) large-scale models are obviated, or at least mitigated, in cloud models. Global models will use the non-hydrostatic framework when their horizontal resolution becomes about 10 kilometers, the theoretical limit for the hydrostatic approximation. This juncture will be reached one to two decades from now. Over the past generation, voluminous datasets on atmospheric convection have been accumulated from radar, instrumented aircraft, satellites, and rawinsonde measurements in field campaigns, enabling the detailed evaluation of models. Improved numerical methods have resulted in more accurate and efficient dynamical cores in models. Improvements have been made in the parameterizations of microphysical processes, radiation, boundary-layer effects, and turbulence; however, microphysical parameterizations remain a major source of uncertainty in all classes of atmospheric models. In recent years, exponentially increasing computer power has extended cloud-resolving-model integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial 1-kilometer scales are resolved in horizontal domains as large as 10,000 kilometers in two-dimensions, and 1,000 x 1,000 square kilometers in three-dimensions. Cloud models now provide statistical information useful for developing more realistic physically based parameterizations for climate models and numerical weather prediction models. It is also expected that NWP and mesoscale model can be run in grid size similar to cloud resolving model through nesting technique. A review of developments, improvements and applications of cloud models (GCE and WRF) at Goddard will be presented in this talk. In particular, a new approach to using multi-scale modeling system to study the interactions between clouds, precipitation, aerosols and land will be presented.

Tao, Wei-Kuo↗
NASA NTRS2006

Using Multi-scale Modeling System to Study the Interactions between Clouds, Precipitation, Aerosols, Radiation and Land Surface

Numerical cloud models, which are based the non-hydrostatic equations of motion, have been extensively applied to cloud-scale and mesoscale processes during the past four decades. Because cloud-scale dynamics are treated explicitly, uncertainties stemming from convection that have to be parameterized in (hydrostatic) large-scale models are obviated, or at least mitigated, in cloud models. Global models will use the non-hydrostatic framework when their horizontal resolution becomes about 10 kilometers, the theoretical limit for the hydrostatic approximation. This juncture will be reached one to two decades from now. Over the past generation, voluminous datasets on atmospheric convection have been accumulated from radar, instrumented aircraft, satellites, and rawinsonde measurements in field campaigns, enabling the detailed evaluation of models. Improved numerical methods have resulted in more accurate and efficient dynamical cores in models. Improvements have been made in the parameterizations of microphysical processes, radiation, boundary-layer effects, and turbulence; however, microphysical parameterizations remain a major source of uncertainty in all classes of atmospheric models. In recent years, exponentially increasing computer power has extended cloud-resolving-model integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial-lkm scales are resolved in horizontal domains as large as 10,000 kilometers in two-dimensions, and 1,000 x 1,000 square kilometers in three-dimensions. Cloud models now provide statistical information useful for developing more realistic physically based parameterizations for climate models and numerical weather prediction models. It is also expected that NWP and mesoscale model can be run in grid size similar to cloud resolving model through nesting technique. A review of developments, improvements and applications of cloud models (GCE and WRF) at Goddard wlll be is presented in this talk. In particular, a new approach to using multi-scale modeling system to study the interactions between clouds, precipitation, aerosols and land will be presented.

Tao, Wei-Kuo↗
NASA NTRS2006

Using Multi-scale Modeling System to Study the Interactions between Clouds, Precipitation, Aerosols, Radiation and Land Surface

Numerical cloud models, which are based the non-hydrostatic equations of motion, have been extensively applied to cloud-scale and mesoscale processes during the past four decades. Because cloud-scale dynamics are treated explicitly, uncertainties stemming from convection that have to be parameterized in (hydrostatic) large-scale models are obviated, or at least mitigated, in cloud models. Global models will use the non-hydrostatic framework when their horizontal resolution becomes about 10 km, the theoretical limit for the hydrostatic approximation. This juncture will be reached one to two decades from now. Over the past generation, voluminous datasets on atmospheric convection have been accumulated from radar, instrumented aircraft, satellites, and rawinsonde measurements in field campaigns, enabling the detailed evaluation of models. Improved numerical methods have resulted in more accurate and efficient dynamical cores in models. Improvements have been made in the parameterizations of microphysical processes, radiation, boundary-layer effects, and turbulence; however, microphysical parameterizations remain a major source of uncertainty in all classes of atmospheric models. In recent years, exponentially increasing computer power has extended cloud-resolving-model integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial 1-km scales are resolved in horizontal domains as large as 10,000 km in two-dimensions, and 1,000 x 1,000 sq km in three-dimensions. Cloud models now provide statistical information useful for developing more realistic physically based parameterizations for climate models and numerical weather prediction models. It is also expected that NWP and mesoscale model can be run in grid size similar to cloud resolving model through nesting technique. A review of developments, improvements and applications of cloud models (GCE and WRF) at Goddard will be presented in this talk. In particular, a new approach to using multi-scale modeling system to study the interactions between clouds, precipitation, aerosols and land will be presented.

Tao, Wei-Kuo↗
DOE OSTI2022

Intercomparison of airborne and surface-based measurements during the CLARIFY, ORACLES and LASIC field experiments

Data are presented from intercomparisons between two research aircraft, the FAAM BAe-146 and the NASA Lockheed P3, and between the BAe-146 and the surface-based DOE (Department of Energy) ARM (Atmospheric Radiation Monitoring) Mobile Facility at Ascension Island (8 S, 14.5W, a remote island in the mid-Atlantic). These took place from 17 August to 5 September 2017, during the African biomass burning season. The primary motivation was to give confidence in the use of data from multiple platforms with which to evaluate numerical climate models. The three platforms were involved in the CLouds-Aerosol-Radiation Interaction and Forcing for Year 2017 (CLARIFY-2017), ObseRvations of Aerosols above CLouds and their intEractionS (ORACLES), and Layered Atlantic Smoke and Interactions with Clouds (LASIC) field experiments. Comparisons from flight segments on six days where the BAe-146 flew alongside the ARM facility on Ascension Island are presented, along with comparisons from wing-tip to wing-tip flight of the P3 and BAe-146 on 18 th August 2017. The intercomparison flight sampled a relatively clean atmosphere overlying a moderately polluted boundary layer, while the 6 fly-bys of the ARM site sampled both clean and polluted conditions 2–4 km upwind. We compare and validate characterisations of aerosol physical, chemical, and optical properties, atmospheric radiation, and cloud microphysics between platforms. We assess the performance of measurement instrumentation in the field, under conditions where sampling conditions are not tightly controlled as in laboratory measurements where calibrations are performed. Solar radiation measurements compared well between airborne platforms. Optical absorption coefficient measurements compared well across all three platforms, even though absolute magnitudes were often low (< 10 Mm -1 ) and close to the sensitivity limits of measurement instrumentation thereby confounding assessments of the comparability of absorption Ångström exponent characterisations. Aerosol absorption measurements from airborne platforms were more comparable than aircraft-to-ground observations. Scattering coefficient observations compared well between airborne platforms, but agreement with ground-based measurements was worse, potentially caused by small differences in sampling conditions or actual aerosol population differences. Chemical composition measurements followed a similar pattern, with better comparisons between the airborne platforms. Thermodynamics, aerosol, and cloud microphysical properties generally compared well.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Precipitation Trade Wind Cumuli within EUREC 4 A Field Campaign Report

The campaign Trades Cumuli Precipitation Initiation and Characterization (TCPIC) within the overarching Elucidating the Role of Clouds-Circulation Coupling in Climate EUREC 4 A campaign took place from 17 January 2020 to 20 February 2020, a total of 35 days. The campaign complemented the more extensive EUREC 4 A campaign focusing on cumulus clouds' role in the Earth's climate. TCPIC concentrated on understanding what triggers the onset and development of precipitation in trade wind cumulus clouds. The campaign requested the deployment of the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) Mobile Facility (AMF) roll, pitch, and heave (RPH) stabilization platform to stabilize two radars on the Maria S. Merian research vessel (RV). The advanced remote-sensing techniques from stabilized radars characterized the entire precipitation life cycle, from the formation of larger cloud drops to precipitation evaporating on its way to the surface. Retrievals of evaporation rates, to track how rain affects the trade wind boundary layer, will be based on the zenith-pointing Doppler observations collected from the stabilized micro rain radar (MRR). Figure 1 shows the instrumentation's deployment on the RV: we installed the AMF RPH stabilization platform and the radars on the uppermost deck (peil deck) of the ship. For installing the devices, we coordinated a test phase of the equipment on the Maria S. Merian RV from 25 to 29 October 2019 in Emden harbor, Germany. In this testing phase, we set up all the connections, tested how to mount the W-band and the micro rain radars firmly on the table, and experimented with guided movements of the table to test the resistance of the whole system. Figure 1 shows the final tests conducted in Emden with the stable platform and the radars mounted.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Cloud-Based Demonstration of the Eastern Interconnection Situational Awareness Monitoring System (ESAMS)

This report describes a cloud-based implementation and field demonstration of the Eastern Interconnection Situational Awareness and Monitoring System (ESAMS). ESAMS was developed to support the detection and source localization of forced oscillations using synchrophasor measurements from tie-lines connecting areas served by different reliability coordinators (RCs), so that RCs could better coordinate their response to wide-area events. A previous effort had identified deployment barriers associated with hosting shared situational awareness tools at a single RC. To address these barriers, ESAMS was migrated to Amazon Web Services and evaluated in a six-month field demonstration. ISO New England (ISO-NE) and PJM streamed data to the platform using AWS Direct Connect and a site-to-site VPN, respectively. The resulting multi-utility measurement footprint enabled regional source localization across major portions of the U.S. Eastern Interconnection and supported routine identification of oscillation events. During the final three months of the trial, 24 events above 2 MW/MVAR were detected. The largest detected oscillation approached a 25 MW peak-to-peak amplitude, and the longest persisted intermittently for more than 11 hours. The demonstration also assessed operational considerations—including data transfer volumes, end-to-end latency, and cloud computing costs—and found that network and compute requirements were modest relative to typical cloud capabilities while providing performance comparable to prior on-premises deployments. Overall, the results indicate that cloud hosting can provide a practical path to shared interconnection-wide oscillation monitoring. The cloud ESAMS demonstration establishes a foundation for broader utility participation and for building future wide-area analytics that leverage measurements across organizational boundaries.

Follum, James D.↗
NASA NTRS1980

Photochemistry of SO2 in Venus' upper cloud layers

The photochemical and transport processes that occur in the Venusian atmosphere in and above the upper cloud region are characterized with attention to the correlation with the Pioneer Venus spectrometer results for the cloud top SO2 distribution. The model uses upward-flowing SO2 and H2O to replace the sulfur and hydrogen lost through the lower boundary by the settling of sulfuric acid aerosols. Oxygen for the oxidation of SO2 to SO3 prior to hydration to H2SO4 is supplied by the photolysis of CO2. A model with SO2 as the major sulfur-bearing gas is consistent with the Pioneer data.

Winick, J. R.↗
NASA NTRS1984

Investigation of mesoscale pre-convective forcing mechanisms

The installation and testing of a numerical mesoscale boundary layer model is discussed. A data analysis is first made using the rawinsonde network which shows a strong baroclinic zone developing in the region where convection was initiated. The observed wind field shows an easterly component developing in opposition to the synoptic flow producing convergence. The numerical boundary layer model is used to diagnose the physical development of the thermal and flow fields. Two physical mechanisms are examined; topography and cloud shading. The results shows that while heated sloping topography alone does create a baroclinic zone and convergence values, cloud shading is a stronger mechanism for producing a thermal field representative of observed conditions

Mcnider, R. T.↗
NASA NTRS1990

Heat transfer measurements from a NACA 0012 airfoil in flight and in the NASA Lewis icing research tunnel

Local heat transfer coefficients from a smooth and roughened NACA 0012 airfoil were measured using a steady state heat flux method. Heat transfer measurements on the specially constructed 0.533 meter chord airfoil were made both in flight on the NASA Lewis Twin Otter Research Aircraft and in the NASA Lewis Icing Research Tunnel (IRT). Roughness was obtained by the attachment of small, 2 mm diameter, hemispheres of uniform size to the airfoil surface in four distinct patterns. The flight data was taken for the smooth and roughened airfoil at various Reynolds numbers based on chord in the range of 1.24x10(exp 6) to 2.50x10(exp 6) and at various angles of attack up to 4 degrees. During these flight tests the free stream velocity turbulence intensity was found to be very low (less than 0.1 percent). The wind tunnel data was taken in the Reynolds number range of 1.20x10(exp 6) to 4.52x10(exp 6) and at angles of attack from -4 degrees to +8 degrees. The turbulence intensity in the IRT was 0.5 to 0.7 percent with the cloud making spray off. Results for both the flight and tunnel tests are presented as Frossling number based on chord versus position on the airfoil surface for various roughnesses and angle of attack. A table of power law curve fits of Nusselt number as a function of Reynolds number is also provided. The higher level of turbulence in the IRT versus flight had little effect on heat transfer for the lower Reynolds numbers but caused a moderate increase in heat transfer at the higher Reynolds numbers. Turning on the cloud making spray air in the IRT did not alter the heat transfer. Roughness generally increased the heat transfer by locally disturbing the boundary layer flow. Finally, the present data was not only compared with previous airfoil data where applicable, but also with leading edge cylinder and flat plate heat transfer values which are often used to estimate airfoil heat transfer in computer codes.

Poinsatte, Philip E.↗
NASA NTRS1991

Prediction of ice shapes and their effect on airfoil performance

Calculations of ice shapes and the resulting drag increases are presented for experimental data on an NACA 0012 airfoil. They were made with a combination of LEWICE and interactive boundary-layer codes for a wide range of conditions which include airspeed and temperature, the droplet size and liquid water content of the cloud, and the angle of attack of the airfoil. In all cases the calculated results account for the drag increase due to ice accretion and, in general, show good agreement with data.

Shin, Jaiwon↗
NASA NTRS2003

Individual Aerosol Particles from Biomass Burning in Southern Africa: Compositions and Size Distributions of Carbonaceous Particles - 1

Individual aerosol particles in smoke plumes from biomass fires and in regional hazes in southern Africa were studied using analytical transmission electron microscopy (TEM), which allowed detailed characterization of carbonaceous particle types in smoke and determination of changes in particle properties and concentrations during smoke aging. Based on composition, morphology, and microstructure, three distinct types of carbonaceous particles were present in the smoke: organic particles with inorganic (K-salt) inclusions, tar ball particles, and soot. The relative number concentrations of organic particles were largest in young smoke, whereas tar balls were dominant in a slightly aged (1 hour) smoke from a smoldering fire. Flaming fires emitted relatively more soot particles than smoldering fires, but soot was a minor constituent of all studied plumes. Further aging caused the accumulation of sulfate on organic and soot particles, as indicated by the large number of internally mixed organic/sulfate and soot/sulfate particles in the regional haze. Externally mixed ammonium sulfate particles dominated in the boundary layer hazes, whereas organic/sulfate particles were the most abundant type in the upper hazes. Apparently, elevated haze layers were more strongly affected by biomass smoke than those within the boundary layer. Based on size distributions and the observed patterns of internal mixing, we hypothesize that organic and soot particles are the cloud-nucleating constituents of biomass smoke aerosols. Sea-salt particles dominated in the samples taken in stratus clouds over the Atlantic Ocean, off the coast of Namibia, whereas a distinct haze layer above the clouds consisted of aged biomass smoke particles.

Posfai, Mihaly↗
NASA NTRS2012

Recent Progress on Deep Blue Aerosol Algorithm as Applied TO MODIS, SEA WIFS, and VIIRS, and Their Intercomparisons with Ground Based and Other Satellite Measurements

The impact of natural and anthropogenic sources of aerosols has gained increasing attention from scientific communities in recent years. Indeed, tropospheric aerosols not only perturb radiative energy balance by interacting with solar and terrestrial radiation, but also by changing cloud properties and lifetime. Furthermore, these anthropogenic and natural air particles, once generated over the source regions, can be transported out of the boundary layer into the free troposphere and can travel thousands of kilometers across oceans and continents resulting in important biogeochemical impacts on the ecosystem. With the launch of SeaWiFS in 1997, Terra/MODIS in 1999, and Aqua/MODIS in 2002, high quality comprehensive aerosol climatology is becoming feasible for the first time. As a result of these unprecedented data records, studies of the radiative and biogeochemical effects due to tropospheric aerosols are now possible. In this talk, we will demonstrate how this newly available SeaWiFS/MODIS aerosol climatology can provide an important piece of puzzles in reducing the uncertainty of estimated climatic forcing due to aerosols. We will start with the global distribution of aerosol loading and their variabilities over both land and ocean on short- and long-term temporal scales observed over the last decade. The recent progress made in Deep Blue aerosol algorithm on improving accuracy of these Sea WiFS / MODIS aerosol products in particular over land will be discussed. The impacts on quantifying physical and optical processes of aerosols over source regions of adding the Deep Blue products of aerosol properties over bright-reflecting surfaces into Sea WiFS / MODIS as well as VIIRS data suite will also be addressed. We will also show the intercomparison results of SeaWiFS/MODIS retrieved aerosol optical thickness with data from ground based AERONET sunphotometers over land and ocean as well as with other satellite measurements. The trends observed in global aerosol loadings of both natural and anthropogenic sources based upon more than a decade of combined MODIS/SeaWiFS data (1997-2011) will be discussed. We will also address the importance of various key issues such as differences in spatial-temporal sampling rates and observation time between different satellite measurements could potentially impact these intercomparisons results, especially for using the monthly mean data, and thus on estimates of long-term aerosol trends.

Hsu, N. Christina↗