Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cell parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Evaluation of Experimental Parameters in the Accelerated Aging of Closed-Cell Foam Insulation

The thermal conductivity of many closed-cell foam insulation products changes over time as production gases diffuse out of the cell matrix and atmospheric gases diffuse into the cells. Thin slicing has been shown to be an effective means of accelerating this process in such a way as to produce meaningful results. Efforts to produce a more prescriptive version of the ASTM C1303 standard test method led to the ruggedness test described here. This test program included the aging of full size insulation specimens for time periods of five years for direct comparison to the predicted results. Experimental parameters under investigation include: slice thickness, slice origin (at the surface or from the core of the slab), thin slice stack composition, product facings, original product thickness, product density, and product type. The test protocol has been completed and this report provides a detailed evaluation of the impact of the test parameters on the accuracy of the 5-year thermal conductivity prediction.

Stovall, Therese K.↗

Proton exchange membrane fuel cells for space and electric vehicle applications: From basic research to technology development

The proton exchange membrane fuel cell (PEMFC) is one of the most promising electrochemical power sources for space and electric vehicle applications. The wide spectrum of R&D activities on PEMFC's, carried out in our Center from 1988 to date, is as follows (1) Electrode Kinetic and Electrocatalysis of Oxygen Reduction; (2) Optimization of Structures of Electrodes and of Membrane and Electrode Assemblies; (3) Selection and Evaluation of Advanced Proton Conducting Membranes and of Operating Conditions to Attain High Energy Efficiency; (4) Modeling Analysis of Fuel Cell Performance and of Thermal and Water Management; and (5) Engineering Design and Development of Multicell Stacks. The accomplishments on these tasks may be summarized as follows: (1) A microelectrode technique was developed to determine the electrode kinetic parameters for the fuel cell reactions and mass transport parameters for the H2 and O2 reactants in the proton conducting membrane. (2) High energy efficiencies and high power densities were demonstrated in PEMFCs with low platinum loading electrodes (0.4 mg/cm(exp 2) or less), advanced membranes and optimized structures of membrane and electrode assemblies, as well as operating conditions. (3) The modeling analyses revealed methods to minimize mass transport limitations, particularly with air as the cathodic reactant; and for efficient thermal and water management. (4) Work is in progress to develop multi-kilowatt stacks with the electrodes containing low platinum loadings.

Srinivasan, Supramaniam↗

Three-dimensional morphology of CuInS{sub 2}:P3HT hybrid blends for photovoltaic applications

Despite potential advantages, the performance of hybrid solar cells with colloidal nanocrystals remains low compared to pure organic solar cells, in particular, when Cd- and Pb-free nanocrystals are employed. To understand this discrepancy, we analyzed possible limiting factors of the performance of hybrid solar cells with CuInS{sub 2} nanoparticles and the polymer poly(3-hexylthiophene) (P3HT). Optimizing the thickness of the active layer indicated that charge transport limits the performance of the solar cells. Since charge transport is among others influenced by the morphology of the bulk heterojunction layer, we performed a detailed analysis of the blend morphology. Therefore, we used electron tomography which provides three-dimensional information on the interpenetrating network formed by the hybrid CuInS{sub 2}:P3HT system. Using statistical methods, we analyzed the distribution of the nanoparticles inside the polymer matrix and the structure of the percolation paths. We found that the morphology appears well suited for application in hybrid solar cells, meaning that other factors must be the bottleneck. Therefore, we investigated in a second step the influence of a post-deposition ligand exchange with acetic acid. This strategy resulted in a strong relative improvement of the solar cell performance, although absolute performance parameters remain low in comparison to hybrid solar cells with colloidal cadmium or lead chalcogenide nanocrystals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Metal Induced Recombination Parameter Extraction using High Resolution Photoluminescence Imaging for Silicon Solar Cells

Metal induced recombination (i.e., contact recombination) is a significant loss mechanism for homojunction crystalline silicon solar cells. In this work, a method is proposed to extract the metal induced recombination parameters using highresolution photoluminescence PL imaging. By calculating the voltage distribution profile between fingers, the total current flow from the semiconductor to the finger, per area, can be obtained. The total recombination current at the semiconductor area and the metal contact area are then calculated and used to calculate the reverse saturation current for each region. The metal induced reverse saturation current (j 0m ) is then obtained. This measurement allows the extraction of j 0m on finished solar cells without the need to make special metal test structures. This is a big advantage over existing methods.

14 SOLAR ENERGY↗

Phase matching of high-order harmonics in a semi-infinite gas cell

Phase matching of high-order harmonic generation is investigated experimentally for various parameters in a semi-infinite gas-cell (SIGC) geometry. The optimized harmonic yield is identified using two different noble gases (Xe and He) and its parameter dependence is studied in a systematic way. Beside the straightforward setup of the SIGC, this geometry promises a high photon flux due to a large interaction region. Moreover, since the experimental parameters within this cell are known accurately, direct comparison to simulations is performed. Spectral splitting and blueshift of high-order harmonics are observed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determination of prescription dose for Cs-131 permanent implants using the BED formalism including resensitization correction

Purpose: The current widely used biological equivalent dose (BED) formalism for permanent implants is based on the linear-quadratic model that includes cell repair and repopulation but not resensitization (redistribution and reoxygenation). The authors propose a BED formalism that includes all the four biological effects (4Rs), and the authors propose how it can be used to calculate appropriate prescription doses for permanent implants with Cs-131. Methods: A resensitization correction was added to the BED calculation for permanent implants to account for 4Rs. Using the same BED, the prescription doses with Au-198, I-125, and Pd-103 were converted to the isoeffective Cs-131 prescription doses. The conversion factor F, ratio of the Cs-131 dose to the equivalent dose with the other reference isotope (F{sub r}: with resensitization, F{sub n}: without resensitization), was thus derived and used for actual prescription. Different values of biological parameters such as α, β, and relative biological effectiveness for different types of tumors were used for the calculation. Results: Prescription doses with I-125, Pd-103, and Au-198 ranging from 10 to 160 Gy were converted into prescription doses with Cs-131. The difference in dose conversion factors with (F{sub r}) and without (F{sub n}) resensitization was significant but varied with different isotopes and different types of tumors. The conversion factors also varied with different doses. For I-125, the average values of F{sub r}/F{sub n} were 0.51/0.46, for fast growing tumors, and 0.88/0.77 for slow growing tumors. For Pd-103, the average values of F{sub r}/F{sub n} were 1.25/1.15 for fast growing tumors, and 1.28/1.22 for slow growing tumors. For Au-198, the average values of F{sub r}/F{sub n} were 1.08/1.25 for fast growing tumors, and 1.00/1.06 for slow growing tumors. Using the biological parameters for the HeLa/C4-I cells, the averaged value of F{sub r} was 1.07/1.11 (rounded to 1.1), and the averaged value of F{sub n} was 1.75/1.18. F{sub r} of 1.1 has been applied to gynecological cancer implants with expected acute reactions and outcomes as expected based on extensive experience with permanent implants. The calculation also gave the average Cs-131 dose of 126 Gy converted from the I-125 dose of 144 Gy for prostate implants. Conclusions: Inclusion of an allowance for resensitization led to significant dose corrections for Cs-131 permanent implants, and should be applied to prescription dose calculation. The adjustment of the Cs-131 prescription doses with resensitization correction for gynecological permanent implants was consistent with clinical experience and observations. However, the Cs-131 prescription doses converted from other implant doses can be further adjusted based on new experimental results, clinical observations, and clinical outcomes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Electropolishing at ANL/FNAL.

A system for electropolishing of 1.3 GHz elliptical single- and nine-cell cavities is in operation at the joint ANL/FNAL cavity processing facility located at Argonne. The system is one peice of a larger 200 m2 complete single cavity processing and assembly facility which also includes clean rooms and high-pressure rinsing. Recently, the electropolishing system has been used to process a series of single and nine-cell cavities. For single cell cavities a good set of EP parameters has been demonstrated based on more than a half dozen complete processing and cold test cycles at ANL/FNAL. The lastest six single cell cavities each exceed EACC=35 MV/m and, at this gradient, have Q in the range 6 10{sup 9} - 1 10{sup 10}. The first nine cell cavities electropolished at ANL have not yet reached similar fields ({approx}23 MV/m-26 MV/m) and ongoing activities are focussed on demonstrating >30 MV/m in these cavities. Suitable nine cell EP parameters using the ANL/FNAL EP system including acid/water temperatures, flow rates, current, voltage, air flow etc. are all substantially different than for single-cell cavities and are discussed here.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular interactions that drive morphological and mechanical stabilities in organic solar cells

Morphological and mechanical stabilities of organic solar cells (OSCs) are of paramount importance to ensure long-lived devices. However, the fundamental drivers of these stability metrics and their competing relationship have yet to be well defined. Here, in this work, several high-performance polymers and small molecule acceptors (SMAs) are considered to assist in the development of a comprehensive view of the molecular drivers of, and interrelationships between, morphological and mechanical stabilities. We find that the SMAs drive much of the embrittlement and diffusion characteristics in the blend films. However, the heterointeraction of the SMA and polymer, probed through dynamic mechanical analysis, is a key contributing factor to the film toughness. The heterointeraction energy is ideally maximally negative (i.e., repulsive), deviating from the geometric mean of the homointeraction energy. These findings assist in introducing a framework to understand the active layer stability and highlight material properties that lead to morphologically stable and physically robust OSCs.

14 SOLAR ENERGY↗

Beams Arrangement in Non-Small Cell Lung Cancer (NSCLC) According to PTV and Dosimetric Parameters Predictive of Pneumonitis

The aim of this study is to propose and validate an original new class of solutions for three-dimensional conformal radiation therapy (3DCRT) treatment planning for non-small cell lung cancer (NSCLC) according to the different patterns of disease presentation (on the basis of tumor location and volume) and to explore beams arrangement (planar or no-planar solutions) to respect dose constraints to the lung parenchyma. Benchmarks matched to validate the new approach are interuser reproducibility and saving on planning time. Tumor location was explored and specific categories created according to the tumor volume and location. Therefore, by applying planar and no-planar 3D plans, we searched for an optimization of the beams arrangement for each category. Dose-volume histograms (DVHs) were analyzed and a plan comparison performed. Results were then validated (class solution planning confirmation) by applying the same strategy to another group of patients. This has been realized at two dose levels (50.4 and 59.4 Gy). Fifty-nine patients were enrolled in this dosimetric study. In the first 27 patients ('exploratory sample') three main planning target volume location categories were identified according to the pattern of the disease presentation: (1) centrally located; (2) peripheral T and mediastinal N (P+N); and (3) superior sulcus. Original class solutions were proposed for each location category. On the next 32 patients ('validation sample'), the treatment planning started directly with the recommended approach. Mean V{sub 20Gy} value was 18.8% (SD {+-} 7.25); mean V{sub 30Gy}:12% (SD {+-} 4.05); and mean lung dose: 11.6Gy (SD {+-} 5.77). No differences between the two total dose level groups were observed. These results suggest a simple and reproducible tool for treatment planning in NSCLC, allowing interuser reproducibility and cutting down on planning time.

61 RADIATION PROTECTION AND DOSIMETRY↗

Biophysical mechanism of differential growth during gravitropism

A research project is described the goal of which is to determine the mechanism of gravitropic curvature in plant stems at the biophysical and the cellular level. The reorientation of plant organs under the influence of gravity is due to differential growth of the upper and lower sides of the organ. The rate of plant cell enlargement is governed by four biophysical parameters: (1) the extensibility of the cell wall; (2) the minimum stress in the cell wall required for wall expansion (the "yield threshold'); (3) the osmotic pressure difference between the cell contents and the water source; and (4) the hydraulic conductivity of the pathway for water uptake. Gravitropic response must involve differential alteration of one or more of these four parameters on the two sides of the growing organ. Each of these factors will be examined to assess the role it plays in gravitropism.

Cosgrove, D.↗

Ti{sub 5}O{sub 5} superstructures of cubic titanium monoxide

A cubic model is proposed for the Ti{sub 5}O{sub 5} (Ti{sub 5}▪O{sub 5}□ ≡ Ti{sub 90}▪{sub 18}O{sub 90}□{sub 18}) superstructure of nonstoichiometric titanium monoxide Ti{sub x}O{sub z} with double imperfection. The unit cell of the cubic Ti{sub 5}O{sub 5} superstructure has the threefold lattice parameter of the unit cell of the basis disordered B1 structure of Ti{sub x}O{sub z} monoxide and belongs to space group <##> } P m } 3 }&#x00AF;<!-- ?? --> m $ Pm/bar 3m $ Pm 3-bar m </##>. The channel of the disorder-order transition, i.e., Ti{sub x}O{sub z} (space group <##> } F m } 3 }&#x00AF;<!-- ?? --> m $ Fm/bar 3m $ Fm 3-bar m </##>)-Ti{sub 5}O{sub 5} (space group <##> } P m } 3 }&#x00AF;<!-- ?? --> m $ Pm/bar 3m $ Pm 3-bar m </##>), includes 75 superstructure vectors of seven stars {k_1_0}, {k_7}, {k_6_(_1_)}, {k_6_(_2_)}, {k_4_(_1_)}, {k_4_(_2_)}, and {k_1}. The distribution functions of Ti and O atoms over the sites of the cubic Ti{sub 5}O{sub 5} superstructure are calculated. A comparison of the X-ray and electron diffraction data obtained for ordered TiO{sub 1.087} monoxide with the theoretical simulation results supports the existence of the cubic Ti{sub 5}O{sub 5} superstructure. The cubic (space group <##> } P m } 3 }&#x00AF;<!-- ?? --> m $ Pm/bar 3m $ Pm 3-bar m </##>) Ti{sub 5}O{sub 5} superstructure is shown to be a high-temperature structure relative to the well-known monoclinic (space group C2/m) superstructure of the same type.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two years of on-orbit gallium arsenide performance from the LIPS solar cell panel experiment

The LIPS on-orbit performance of the gallium arsenide panel experiment was analyzed from flight operation telemetry data. Algorithms were developed to calculate the daily maximum power and associated solar array parameters by two independent methods. The first technique utilizes a least mean square polynomial fit to the power curve obtained with intensity and temperature corrected currents and voltages; whereas, the second incorporates an empirical expression for fill factor based on an open circuit voltage and the calculated series resistance. Maximum power, fill factor, open circuit voltage, short circuit current and series resistance of the solar cell array are examined as a function of flight time. Trends are analyzed with respect to possible mechanisms which may affect successive periods of output power during 2 years of flight operation. Degradation factors responsible for the on-orbit performance characteristics of gallium arsenide are discussed in relation to the calculated solar cell parameters. Performance trends and the potential degradation mechanisms are correlated with existing laboratory and flight data on both gallium arsenide and silicon solar cells for similar environments.

Francis, R. W.↗

Rietveld refinement of the semiconducting system Bi{sub 2-x}Fe{sub x}Te{sub 3} from X-ray powder diffraction

The semiconducting system Bi{sub 2-x}Fe{sub x}Te{sub 3} (x = 0.0, 0.02, 0.04 and 0.08) was synthesized at 1000 deg. C for 30 h. The scanning electron microscope (SEM) image reveals the tendency of the Bi{sub 2-x}Fe{sub x}Te{sub 3} system to form a sheet structure with more pronounced alignment and to enhance the formation of some microstructure tubes. The structure of the system under study was refined on the basis of X-ray powder diffraction data using the Rietveld method. The analysis revealed the complete miscibility of Fe in the Bi{sub 2}Te{sub 3} matrix and hence the formation of single phase. The system crystallizes in the space group R-3m [1 6 6]. The lattice parameters and the unit cell size slightly change by the incorporation of Fe. The refinement of instrumental and structural parameters led to reliable values for the R{sub B}, R{sub F} and Chi{sup 2}.

36 MATERIALS SCIENCE↗

Simulation of the Parameters of a Titanium-Tritide-Based Beta-Voltaic Cell

The simulation of β-voltaic power cells consisting of a combined β-source and a converter was performed. The TiT{sub 2} compound containing the radioactive tritium isotope was selected as the source. As the converter, structures based on semiconductor materials, most commonly used in developing power cells, i.e., Si, SiC, GaAs, were considered. Using the Monte Carlo method, the main source parameters were calculated, in particular, the maximum achievable short-circuit current was estimated.

30 DIRECT ENERGY CONVERSION↗

Li-ion battery design through microstructural optimization using generative AI

Lithium-ion batteries are used across various applications, necessitating tailored cell designs to enhance performance. Optimizing electrode manufacturing parameters is a key route to achieving this, as these parameters directly influence the microstructure and performance of the cells. However, linking process parameters to performance is complex, and experimental or modeling campaigns are often slow and expensive. This study introduces a fast computational optimization framework for electrode manufacturing parameters. A generative model, trained on a small dataset of microstructural images associated with different manufacturing parameters, efficiently generates representative microstructures for new parameters. This model is integrated into a Bayesian optimization loop that includes microstructure generation, characterization, and simulation, aiming to find optimal manufacturing parameters for a particular application. Significant improvement in the energy density of a 4680 cell is achieved through bespoke cell design, highlighting the importance of cell-scale normalization. The framework’s modularity allows its application to various advanced materials manufacturing scenarios.

batteries↗

Elastic-Poroelastic Simulation of Locally Resonant Ultrasound for Aging Li-Metal Batteries

An elastic-poroelastic simulation of ultrasound inspection for lithium-metal batteries is presented and compared to empirical reflection spectra measured during battery cycling. Simulated reflection spectra were obtained using a two-dimensional (2D) plane strain model, comprised of dozens of individual microns-thick layers within a Li-metal pouch cell. The simulated reflection spectra were then compared to ultrasonic reflection spectra measurements taken intermittently during cell cycling. A sensitivity analysis and parameter calibration were performed for the pristine pouch cell simulation prior to cycling, providing a baseline to account for difficult to measure poroelastic material parameters. Then, the reduction in solid Li anode thickness and corresponding growth into a mossy lithium layer was modeled to represent aging conditions. Results from both simulations and empirical inspections show similar trends in through-thickness resonance frequencies due to cell aging.

Battery↗

Application of the MOS C-V technique to determine impurity concentrations and surface parameters on the diffused face of silicon solar cells

An experimental and theoretical investigation of the feasibility of using the MOS C-V (capacitance-voltage) technique to determine impurity and surface state concentrations on the diffused face of Si solar cells with Ta2O5 coatings. Impurity concentration 10 A from the diffused surface is found to be 2.9 times 10 to the 20th power per cu cm. Charge density in surface and oxide states is 2.1 times 10 to the 13th power per sq cm. These data agree with theoretical predictions.-

Weinberg, I.↗

Deep-level defects and recombination parameters in proton irradiated AlGaAs-GaAs solar cells

The deep-level defects produced in high efficiency AlGaAs-GaAs solar cells by proton energies of 50, 100, 200, and 290 keV are investigated. Proton fluences were from 10 to the 10th to 10 to the 13th p/sq cm. The results show that the diode ideality factor varies between 1.9 and 2.1, indicating that the dominant current component is due to the recombination of electron-hole pairs via deep-level traps in the junction space charge region of these diodes. The recombination current increases with increasing proton fluence and proton energy. The reduction of open circuit voltage, short circuit current, and conversion efficiency in the irradiated cells relates directly to the density of the deep-level defects induced by proton irradiation.

Li, S. S.↗