The superconducting cavity-stabilized maser oscillator
The possibility of integrating a superconducting cavity with a traveling wave maser is explored to obtain a frequency standard with very high spectral purity.
Higa, W. H.↗
SEARCH · Engineering Papers
Results for “cavity”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Experimental investigation on sound transmission through cavity-backed panels
Some experimental findings are presented on the effects of panel stiffness and receiving space absorption on low frequency sound transmission through panels into closed spaces. A simplified method for calculating the low frequency noise reduction of a cavity-backed panel is presented.
Barton, C. K.↗
Users' manual for computer program for one-dimensional analysis of coupled-cavity traveling wave tubes
The use of the coupled cavity traveling wave tube for space communications has led to an increased interest in improving the efficiency of the basic interaction process in these devices through velocity resynchronization and other methods. To analyze these methods, a flexible, large signal computer program for use on the IBM 360/67 time-sharing system has been developed. The present report is a users' manual for this program.
Omalley, T. A.↗
A new source of lunar electromagnetic induction - Forcing by the diamagnetic cavity
Analysis of the power spectral densities (PSD's) of eight 50-hour time series from Apollo 12 lunar surface magnetometer (LSM) and isochronous Explorer 35 Ames magnetometer data points to the existence of a new source of electromagnetic induction in the interior of the moon which is independent of the transverse electric mode. This source is hypothesized to arise from extension of the cavity diamagnetic field into the moon in analogy with the fringing field of a solenoid.
Sonett, C. P.↗
Effect of grazing flow on the acoustic impedance of interacting cavity-backed orifices
The two-microphone method was used to investigate the impedance of interacting cavity-backed orifices in the presence of a grazing flow; the investigation has relevance for the control of turbomachinery noise generated within jet engines. The number (varied from one to 16), the diameter, and the spacing of the orifices were the chief parameters studied in the experimental program. It was found that interactions between adjacent orifices, while increasing reactance, do not significantly alter resistance. In addition, the grazing flow appears to reduce the rate of increase of the reactance.
Hersh, A. S.↗
The momentum transfer of incompressible turbulent separated flow due to cavities with steps
An experimental study was conducted using a plate test bed having a turbulent boundary layer to determine the momentum transfer to the faces of step/cavity combinations on the plate. Experimental data were obtained from configurations including an isolated configuration and an array of blocks in tile patterns. A momentum transfer correlation model of pressure forces on an isolated step/cavity was developed with experimental results to relate flow and geometry parameters. Results of the experiments reveal that isolated step/cavity excrecences do not have a unique and unifying parameter group due in part to cavity depth effects and in part to width parameter scale effects. Drag predictions for tile patterns by a kinetic pressure empirical method predict experimental results well. Trends were not, however, predicted by a method of variable roughness density phenomenology.
White, R. E.↗
A hybrid technique for wire antennas in a cavity
An evaluation is conducted of two numerical techniques developed by Richmond (1961, 1966) for wire antennas and scattering bodies. It is concluded that a more efficient and accurate scheme can be devised by suitably combining the two techniques. This scheme, which is called the 'hybrid method', is well suited for a wire antenna mounted in a cavity. Reaction matching is employed in the case of the antenna, while point matching is used for the support structure. The described approach makes it possible to consider voltage generators without the use of any equivalent magnetic frill current sources. The number of unknown currents to be determined is essentially optimized by this combination of reaction matching and point matching. The resulting current distribution is a quantized distribution on the support structure and is continuous on the main radiator.
Agrawal, P. K.↗
Aerodynamic properties of a flat plate with cavity for optical-propagation studies
Transonic wind-tunnel tests were performed on a flat plate with and without a cube-shaped cavity and antiresonance devices. Measurements were made of the optical propagation and aerodynamic properties of the boundary and shear layers. The model and its velocity profiles and pressures are described.
Buell, D. A.↗
Configuration and gradual dynamics of prominence-related X-ray coronal cavities
X-ray images of the solar corona obtained by the S-054 telescope on Skylab have been analyzed together with H-alpha filtergrams from the Catania Astrophysical Observatory and EUV and magnetic data, to study the morphology and the evolution of the coronal structures associated with prominences (coronal cavities). Prominences associated with young (up to three solar rotations) and old (greater than eight) magnetic neutral lines are significantly less stable than those associated with middle-aged neutral lines. Downward bending of the top of the inner magnetic loop, necessary in some models of prominences, is not detected in these X-ray observations. The relevance of these results to models of prominence formation is discussed.
Serio, S.↗
A simulation exercise of a cavity-type solar receiver using the HEAP program
A computer program has been developed at JPL to support the advanced studies of solar receivers in high concentration solar-thermal-electric power plants. This work presents briefly the program methodology, input data required, expected output results, capabilities and limitations. The program was used to simulate an existing 5 kwt experimental receiver of a cavity type. The receiver is located at the focus of a paraboloid dish and is connected to a Stirling engine. Both steady state and transient performance simulation were given. Details about the receiver modeling were also presented to illustrate the procedure followed. Simulated temperature patterns were found in good agreement with test data obtained by high temperature thermocouples. The simulated receiver performance was extrapolated to various operating conditions not attained experimentally. The results of the parameterization study were fitted to a general performance expression to determine the receiver characteristic constraints. The latter were used to optimize the receiver operating conditions to obtain the highest overall conversion efficiency.
Lansing, F. L.↗
"Grinding" cavities in polyurethane foam
Grinding tool installed on conventional milling machine cuts precise cavities in foam blocks. Method is well suited for prototype or midsize production runs and can be adapted to computer control for mass production. Method saves time and materials compared to bonding or hot wire techniques.
Brower, J. R.↗
Cavity-backed spiral-slot antenna
Compact, rugged, flush-mounted antenna operates in sum or difference modes with circular polarization. Radiating elements consist of two pairs of centerfed, interleaved spiral slots in conductive aperature plane. At center feedpoint of each slot pair is balanced feed assembly. Center points are fed from split-tube coaxial balun passing through quarter-wave length deep cavity. Circularly polarized patterns represent both rceived and transmitted signals.
Ellis, H., Jr.↗
Large-scale turbulent structures in jets and in flows over cavities and their relationship to entrainment and mixing
Large scale structures in jets and in flows over cavities were investigated experimentally to determine their role in entrainment, mixing, and noise production. The presence of these structures resulted in growth of the shear layer and entrainment. Merging of adjacent large scale structures caused the near field pressure signal in excited flows. It is believed that both the entrained fluid as well as its eventual mixing with the jet flow can be controlled by introducing pulsation in the jet flow at a frequency for which the flow is most unstable.
Sarohia, V.↗
Apparatus for electrolytically tapered or contoured cavities
An electrolytic machining apparatus for forming tapered or contoured cavities in an electrically conductive and electrochemically erodible piece is presented. It supports the workpiece and an electrode for movement relatively toward each other and has means for pumping an electrolyte between the workpiece and the electrode.
Williams, L. A.↗
Validity of small scale tests for turret/fairing loads and cavity effects
Data from several wind tunnel experiments along with available flight test data are used to discuss the validity of small scale tests and their inherent limitations. Tests were performed at transonic speeds to measure the turbulence levels in a cavity with and without a forward porous fence, turret drag with and without an aerodynamic fairing, and turret/fairing unsteady pressures.
Mcdermott, D. J.↗
Improving Radiometer-Cavity Absorptance
In improved cavity radiometer, each sensor cone ends in small tube so that black paint cannot form truncating meniscus. Inner diameter of tube is 0.25 mm; its outer diameter is 0.5 mm. During painting process, excess paint is drawn out through tube, preventing formation of meniscus at apex. After paint is cured, end of tube is crimped shut to form effective light trap.
Wilson, R. C.↗
The Resonant Cavity Radiator (RCR)
The design of the resonant cavity radiator (RCR) is compared to that of the slotted waveguide array in terms of efficiency, weight, and structural integrity. It is shown that the RCR design has three significant potentials over the slotted waveguide array: (1) improvement in efficiency; (2) lighter weight; and (3) simpler structure which allows the RCR to be integrated with the RF tube to alleviate thermal interface problems.
Schroeder, K. G.↗
Response of large cavity ion chambers to space protons
The assumption that spherical-shell ion chamber rssponse is equal to the dose in the center of the cavity is found to be a poor approximation for ion chambers used for area monitoring in the space program. The dose response is calculated using the appropriate areal density distribution function. Effects of nuclear reaction are evaluated using proton buildup factors. Errors of up to 100% are found for some components of the space radiation environments.
Wilson, J. W.↗