Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “analyzed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

The method of lines in analyzing solids containing cracks

A semi-numerical method is reviewed for solving a set of coupled partial differential equations subject to mixed and possibly coupled boundary conditions. The line method of analysis is applied to the Navier-Cauchy equations of elastic and elastoplastic equilibrium to calculate the displacement distributions in various, simple geometry bodies containing cracks. The application of this method to the appropriate field equations leads to coupled sets of simultaneous ordinary differential equations whose solutions are obtained along sets of lines in a discretized region. When decoupling of the equations and their boundary conditions is not possible, the use of a successive approximation procedure permits the analytical solution of the resulting ordinary differential equations. The use of this method is illustrated by reviewing and presenting selected solutions of mixed boundary value problems in three dimensional fracture mechanics. These solutions are of great importance in fracture toughness testing, where accurate stress and displacement distributions are required for the calculation of certain fracture parameters. Computations obtained for typical flawed specimens include that for elastic as well as elastoplastic response. Problems in both Cartesian and cylindrical coordinate systems are included. Results are summarized for a finite geometry rectangular bar with a central through-the-thickness or rectangular surface crack under remote uniaxial tension. In addition, stress and displacement distributions are reviewed for finite circular bars with embedded penny-shaped cracks, and rods with external annular or ring cracks under opening mode tension. The results obtained show that the method of lines presents a systematic approach to the solution of some three-dimensional mechanics problems with arbitrary boundary conditions. The advantage of this method over other numerical solutions is that good results are obtained even from the use of a relatively coarse grid.

Gyekenyesi, John P.↗
NASA NTRS1990

Comparison of UNL laser imaging and sizing system and a phase Doppler system for analyzing sprays from a NASA nozzle

Research was conducted on characteristics of aerosol sprays using a P/DPA and a laser imaging/video processing system on a NASA MOD-1 air assist nozzle being evaluated for use in aircraft icing research. Benchmark tests were performed on monodispersed particles and on the NASA MOD-1 nozzle under identical lab operating conditions. The laser imaging/video processing system and the P/DPA showed agreement on a calibration tests in monodispersed aerosol sprays of + or - 2.6 micron with a standard deviation of + or - 2.6 micron. Benchmark tests were performed on the NASA MOD-1 nozzle on the centerline and radially at 0.5 inch increments to the outer edge of the spray plume at a distance 2 ft downstream from the exit nozzle. Comparative results at two operation conditions of the nozzle are presented for the two instruments. For the 1st case studied, the deviation in arithmetic mean diameters determined by the two instruments was in a range of 0.1 to 2.8 micron, and the deviation in Sauter mean diameters varied from 0 to 2.2 micron. Severe operating conditions in the 2nd case resulted in the arithmetic mean diameter deviating from 1.4 to 7.1 micron and the deviation in the Sauter mean diameters ranging from 0.4 to 6.7 micron.

Alexander, Dennis R.↗
NASA NTRS1991

Mechanical response tissue analyzer for estimating bone strength

One of the major concerns for extended space flight is weakness of the long bones of the legs, composed primarily of cortical bone, that functions to provide mechanical support. The strength of cortical bone is due to its complex structure, described simplistically as cylinders of parallel osteons composed of layers of mineralized collagen. The reduced mechanical stresses during space flight or immobilization of bone on Earth reduces the mineral content, and changes the components of its matrix and structure so that its strength is reduced. Currently, the established clinical measures of bone strength are indirect. The measures are based on determinations of mineral density by means of radiography, photon absorptiometry, and quantitative computer tomography. While the mineral content of bone is essential to its strength, there is growing awareness of the limitations of the measurement as the sole predictor of fracture risk in metabolic bone diseases, especially limitations of the measurement as the sole predictor of fracture risk in metabolic bone diseases, especially osteoporosis. Other experimental methods in clinical trials that more directly evaluate the physical properties of bone, and do not require exposure to radiation, include ultrasound, acoustic emission, and low-frequency mechanical vibration. The last method can be considered a direct measure of the functional capacity of a long bone since it quantifies the mechanical response to a stimulus delivered directly to the bone. A low frequency vibration induces a response (impedance) curve with a minimum at the resonant frequency, that a few investigators use for the evaluation of the bone. An alternative approach, the method under consideration, is to use the response curve as the basis for determination of the bone bending stiffness EI (E is the intrinsic material property and I is the cross-sectional moment of inertia) and mass, fundamental mechanical properties of bone.

Arnaud, Sara B.↗
NASA NTRS1991

Monitoring, analyzing, and modeling global climate

Diabatic heating rate estimates as residuals of the dry thermodynamic equation were generated for May 1, 1985 to December 1989 in pentad resolution. Published results show moderate correlations (approx. .6) between heating rate and outgoing long wave radiation for periods under 90 days in the tropics and many extratropical locations. Nine years of simulation with the Community Climate Model 1 (CCM1) using R15 and observed sea surface temperatures shows that the model retains significantly more heat at the surface and in the free atmosphere than does the actual earth system. A post-processor for the CCM1, with capabilities to produce simulated microwave sounding unit (MSU) brightness temperatures was written. Techniques were refined considerably and validation studies were carried out to verify the globally distributed free atmosphere temperature anomalies derived from MSU data. The precision is such that detailed, long-term climate monitoring is well within the capability of these data.

Christy, John R.↗
NASA NTRS1990

Analyzing time delays in a flight simulation environment

Transport delay in a multirate flight simulation environment is examined. An equivalent systems model is developed that quantifies the contributions of individual components and their sampled-data interactions. Mathematical algorithms used in the discrete implementation are also considered, because they are important elements of a flight simulation system. The equivalent systems model was used to demonstrate the consistency and accuracy of data obtained in the flight simulation facility at Ames Research Center. It showed that effective time delays in simulation models, including delays in scene presentation to the pilot, are considerably less than might be assumed by casual examination of raw data obtained from component-level experiments.

Mcfarland, R. E.↗
NASA NTRS1991

Diagnosing development. II - A study of rapid cyclone development using analyzed data fields

A diagnosis is presented of the explosive development phase of a cyclone that occurred over the southeastern U.S. during the 24 hour period 1200 GMT January 20 to 1200 GMT January 21, 1979. The Zwack-Osossi development equation is extended to incorporate geostrophic and ageostrophic forcing of the basic development parameter, geostrophic vorticity tendency. This equation yields reasonable comparability with observed geostrophic vorticity changes and shows positive vorticity advection, latent heat release and thermal advection to be the primary development mechanisms.

Smith, Phillip↗
NASA NTRS1991

Analyzing remote sensing geobotanical trends in Quetico Provincial Park, Ontario, Canada, using digital elevation data

A 10 x 13-km area in Quetico Provincial Park, Canada has been studied using a digital elevation model to separate different drainage classes and to examine the influence of site factors and lithology on vegetation. Landsat Thematic Mapper data have been classified into six forest classes of varying deciduous-coniferous cover through nPDF, a procedure based on probability density functions. It is shown that forests growing on mafic lithologies are enriched in deciduous species, compared to those growing on granites. Of the forest classes found on mafics, the highest coniferous component was on north facing slopes, and the highest deciduous component on south facing slopes. Granites showed no substantial variation between site classes. The digital elevation derived site data is considered to be an important tool in geobotanical investigations.

Warner, Timothy A.↗
NASA NTRS1991

An overview of tested and analyzed NTP concepts

The goals of the Space Exploration Initiative are discussed, and the technologies which enable their attainment are evaluated. The main driving technology is the propulsion system; for interplanetary missions, the safest and most affordable is a Nuclear Thermal Propulsion (NTP) system. This paper presents an overview of the NTP systems which have received detailed conceptual design and, for several, testing.

Walton, James T.↗
NASA NTRS1992

Analyzing Satellite Images Of The Ocean

PC-SEAPAK is user-interactive software package specifically developed for analysis of data from satellites in oceanographic research. Program used to process and interpret data obtained from Nimbus-7/Coastal Zone Color Scanner (CZCS) and NOAA Advanced Very High Resolution Radiometer (AVHRR). PC-SEAPAK copyrighted product with all copyright vested in National Aeronautics and Space Administration.

Mcclain, Charles R.↗
NASA NTRS1992

Program Analyzes Crack-Growth Data

Crack Growth Rate Data Analysis program used for cyclis crack-growth testing of compact tension specimens. Program digitizes data on crack-opening displacement vs. load and reduces these into data on crack-growth rate vs. stress-intensity excursion. Written in HP BASIC.

Demonet, Charles M.↗
NASA NTRS1992

Analyzing Robotic Kinematics Via Computed Simulations

Computing system assists in evaluation of kinematics of conceptual robot. Displays positions and motions of robotic manipulator within work cell. Also displays interactions between robotic manipulator and other objects. Results of simulation displayed on graphical computer workstation. System includes both off-the-shelf software originally developed for automotive industry and specially developed software. Simulation system also used to design human-equivalent hand, to model optical train in infrared system, and to develop graphical interface for teleoperator simulation system.

Carnahan, Timothy M.↗
NASA NTRS1991

An overview of tested and analyzed NTP concepts

If we buy into the goals of the Space Exploration Initiative (SEI) and accept that they are worthy of the hefty investment of our tax dollars, then we must begin to evaluate the technologies which enable their attainment. The main driving technology is the propulsion systems; for interplanetary missions, the safest and most affordable is a Nuclear Thermal Propulsion (NTP) system. An overview is presented of the NTP systems which received detailed conceptual design and, for several, testing.

Walton, James T.↗
NASA NTRS1991

Material property for designing, analyzing, and fabricating space structures

An analytical study was made of plasma assisted bullet projectile. The finite element analysis and the micro-macromechanic analysis was applied to an optimum design technique for the multilayered graphite-epoxy composite projectile that will achieve hypervelocity of 6 to 10 Km/s. The feasibility was determined of dialectics to monitor cure of graphite-epoxies. Several panels were fabricated, cured, and tested with encouraging results of monitoring the cure of graphite-epoxies. The optimum cure process for large structures was determined. Different orientation were used and three different curing cycles were employed. A uniaxial tensile test was performed on all specimens. The optimum orientation with the optimum cure cycle were concluded.

Kolkailah, Faysal A.↗
NASA NTRS1992

A theoretical approach for analyzing the restabilization of wakes

Recently reported experimental results demonstrate that restabilization of the low-Reynolds-number flow past a circular cylinder can be achieved by the placement of a smaller cylinder in the wake of the first at particular locations. Traditional numerical procedures for modeling such phenomena are computationally expensive. An approach is presented here in which the properties of the adjoint solutions to the linearized equations of motion are exploited to map quickly the best positions for the small cylinder's placement. Comparisons with experiment and previous computations are favorable. The approach is shown to be applicable to general flows, illustrating how strongly control mechanisms that involve sources of momentum couple to unstable (or stable) modes of the system.

Hill, D. C.↗
NASA NTRS1992

A theoretical approach for analyzing the restabilization of wakes

A linear stability analysis provides the basis for an analysis of the effects of prescribed changes upon the global stability characteristics of a bluff body wake. The analysis is applied in particular to the problem of placing a small cylinder in the wake of a larger one in order to suppress the vortex street. A prediction of the alteration in the critical Reynolds number of the system as a function of the location of the second cylinder relative to the first is presented and is shown to compare favorably with experimental results. The effect upon shedding frequency is also considered. The approach relies on the solution of an adjoint eigenvalue problem and an inhomogeneous adjoint boundary value problem. These adjoint solutions are shown to be a key component in the analysis of a variety of wake control strategies.

Hill, D. C.↗
NASA NTRS1992

A method of analyzing holographic interferograms of ballistic models in hypersonic free-flight

The objective of this research was to develop a method to extract integrated flowfield density information from finite-fringe interferograms produced with a laser holographic interferometer. This method was applied to two sets of holograms. An aeroassist flight experiment model flown in a mixture of 50 percent air - 50 percent argon and a blunt slender cone flown in air were flown at Mach 14.5 into freestream static pressures of 0.04 and 0.08 atm, respectively. The method of analysis can be separated into two main divisions. The first step is to identify fringes inside the wake in terms of the fringes in the freestream. This is important because refraction effects have obscured the region near the shock such that fringes cannot be followed into the wake region. The second step is to extrapolate the freestream fringes into the wake to determine the location of disturbance-related fringe shifts. Coupled with assumptions about the shape of the wake region, the locations of the disturbance-related fringe shifts can be related to the integrated density.

Kieffer, Douglas L.↗
NASA NTRS1990

The use of the Wigner Distribution to analyze structural impulse responses

In this paper it is argued that the time-frequency analysis of structural impulse responses may be used to reveal the wave types carrying significant energy through a structure. Since each wave type is characterized by its own dispersion relation, each wave type may be associated with particular features appearing in the time-frequency domain representation of an impulse response. Here the Wigner Distribution is introduced as a means for obtaining appropriate time-frequency representations of impulse responses. Practical aspects of the calculation of the Wigner Distribution are discussed and examples of its application to the analysis of structural impulse responses are given. These examples will show that the Wigner Distribution may be conveniently used to distinguish between the contributions of various waves types to a total structural response.

Wahl, T. J.↗