Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “accelerator design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Involving the new generations in particle physics endeavours

Since 1984 INFN and University of Pisa scientists performing experiments at Fermilab have been running a two-month summer training program for Italian students at the lab. In 1984 the program involved only a few physics students from the University of Pisa, but it was later extended to other INFN groups and to engineering students. Since 2004 the program has been supported in part by the US Department of Energy (DOE) in the frame of an exchange agreement with INFN and has been run by the Cultural Association of Italians at Fermilab (CAIF). In 2007 the Sant’Anna School of Advanced Studies (Pisa) established an agreement with Fermilab to share the cost of four engineering students each year. In the almost 40 years of its history, the program has hosted at Fermilab approximately 550 Italian students from more than 20 Italian universities and from some non-Italian universities. In addition, in the years 2010-2019, with the support of the Italian National Institute of Astrophyics (INAF), the Italian Space Agency (ASI), and CAIF, 30 students were hosted in other US laboratories and universities. The Fermilab training programs spanned from data analysis to design and construction of particle detectors and accelerator components, R/D on superconductive elements, theory of accelerators, and analysis of astrophysical data. At the other US laboratories the offered training was on Space Science. In 2015 the University of Pisa endorsed the program as one of its own Summer Schools. The interns are enrolled as Pisa students for the duration of the internship. They are required to write summary reports published in the Fermilab and University of Pisa web pages. Upon positive evaluation by a University board, students are acknowledged 6 ECTS credits. The entire program is expected to expand further under CAIF management. An agreement has been signed between ASI and CAIF, for ASI to support yearly three two-months fellowships in US space science. In the following we inform on student recruiting, training programs, and final evaluation

Barzi, E.↗
DOE OSTI2024

Novel indium phosphide charged particle detector characterization with a 120 GeV proton beam

Thin film detectors which incorporate semiconductor materials other than silicon have the potential to build upon their unique material properties and offer advantages such as faster response times, operation at room temperature, and radiation hardness. To explore the possibility, promising candidate materials were selected, and particle tracking detectors were fabricated. An indium phosphide detector with a metal-intrinsic-metal structure has been fabricated for particle tracking. The detector was tested using radioactive sources and a high energy proton beam at Fermi National Accelerator Laboratory. In addition to its simplistic design and fabrication process, the indium phosphide particle detector showed a very fast response time of hundreds of picoseconds for the 120 GeV protons, which are comparable to the ultra-fast silicon detectors. This fast-timing response is attributed to the high electron mobility of indium phosphide. Such material properties can be leveraged to build novel detectors with superlative performance.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Reconstruction of neutrino events in the Accelerator Neutrino Neutron Interaction Experiment. Part I

The Accelerator Neutrino Neutron Interaction Experiment (ANNIE) was designed to reconstruct neutrino events from the Fermilab Booster Neutrino Beam (BNB) with the parallel goals of measuring neutron production in interactions with oxygen and serving as a testbed for new technology. The ANNIE detector consists of a 26-ton water Cherenkov target tank instrumented with conventional photomultiplier tubes (PMTs), a downstream tracking muon spectrometer, and an upstream double wall of plastic scintillator to serve to veto charged particles incoming from neutrino events that occur upstream of the experimental setup. ANNIE has also deployed multiple Large-Area Picosecond PhotoDetectors (LAPPDs) and a test vessel of water-based liquid scintillator (WbLS). This paper describes the event reconstruction performance of the detector before implementation of these novel technologies, which will serve as a baseline against which their impact can be measured. That said, even the techniques used for event reconstruction using only the conventional PMT array and muon spectrometer are significantly different than those used in other water Cherenkov detectors due to the small size of ANNIE (which makes nanosecond-scale timing not as useful as in a large detector) and the availability of reconstruction information from the tracking muon spectrometer. We demonstrate that combining the information from these two elements into a single fit using only pattern recognition yields a muon vertex uncertainty of 60 cm, a directional uncertainty of 13.2 degrees, and energy reconstruction uncertainty of about 10% for BNB muon neutrino Charged Current Zero Pion (CC0π) events.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Probing the 𝑗 dependence of angular distributions and 𝑁=20 shell rigidity via the 36 S (𝑝,𝑑) 35 S reaction

An investigation of the N=20 36 S nucleus has been performed through a detailed study of the 3 6S (p,d)3 5S neutron-removal reaction, employing a 66-MeV proton beam at iThemba Laboratory for Accelerator Based Sciences and an innovative target design. Using the high-resolution K = 600 magnetic spectrometer, 98 states in 3 5S were identified up to 16-MeV excitation energy, including 47 previously unobserved states. Angular distributions and spectroscopic factors, including isobaric analog-state contributions, were extracted for 81 levels. A pronounced j dependence in the angular distributions of ℓ=2 states provides refined insights into the spin-orbit splitting. Finite-range adiabatic distorted-wave approximation calculations qualitatively reproduce the observed j dependence. Comparisons of the measured 1d 5/2 spectroscopic strength distribution with large-scale shell-model and ab initio calculations show good agreement overall, and the robustness of the N=20 shell closure in 36 S is confirmed when comparing the relatively low fp orbital occupancies in 40 Ca and 3 6S across the Fermi surface. This study underscores the utility of neutron-removal reactions in probing nuclear structure and the Fermi surface of sd nuclei and beyond. The findings advance our understanding of shell evolution and offer constraining data for theoretical models.

20 ≤ A ≤ 38↗
DOE OSTI2024

X-ray diagnostics for the cavity-based x-ray free-electron laser project

The success of x-ray free-electron lasers (XFELs) in recent years has greatly advanced many scientific fields. However, most of these XFELs suffer from a low longitudinal coherence and instabilities due to the stochastic start-up process. A cavity-based x-ray free-electron laser (CBXFEL) is a possible future direction in the development of fully coherent and stable x-ray sources. One of the challenges of a CBXFEL is the requirement for the μ⁢m−sized electron bunches to fully overlap in three dimensions with the circulating μ⁢m−sized x-ray pulses in an x-ray cavity tens or hundreds of meters long. We present here the development of an x-ray diagnostics system for accurate alignment of x-ray beams in the CBXFEL cavity. The system was developed within the framework of a CBXFEL research and development collaboration among Argonne National Laboratory, SLAC National Accelerator Laboratory, and Spring-8. All the designed diagnostic components have been fully characterized at the Advanced Photon Source to demonstrate a capability for sub-μ⁢rad angular and μ⁢m spatial alignment of the CBXFEL cavity.

Free-electron lasers↗
DOE OSTI2025

Serpentine Magnet Designs for the Interaction Region of the Electron-Ion Collider (EIC)

The Electron-Ion Collider (EIC), hosted by Brookhaven National Laboratory, is designed to deliver a peak luminosity of 1 × 10 34 cm −2 sec −1 . The interaction region (IR) of the EIC imposes several constraints in terms of field quality, aperture, and spatial layout, which necessitates the development of several unique superconducting serpentine direct wind magnets. These magnets are constructed using either a single strand or a small-diameter 6-around-1 NbTi cable, presenting unique challenges for design and optimization. This paper introduces a new computational code specifically developed to streamline and integrate the design process for these magnets, enabling faster design iterations while addressing their complex requirements. Here, in this paper, we first introduce the code, which builds on established electromagnetic fundamentals. The code incorporates tools for optimizing winding patterns and for correcting magnetic multipoles; additionally, it interfaces with established magnet design software. We also present the design of several serpentine magnets for the EIC IR, demonstrating the code’s capability to deliver precise and efficient solutions. These designs highlight the code’s ability to accelerate the development cycle, ensuring the serpentine magnets meet the demanding specifications of the EIC project.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Investigation of the effects of passive pre-chamber nozzle pattern and ignition system on engine performance and emissions

The impact of passive pre-chamber (PC) internal volume, nozzle hole pattern (i.e. with and without a central axial nozzle), and PC igniter plug type on performance and emissions was investigated in an optically accessible, single-cylinder, gasoline research engine. The two PC igniter plugs investigated were a conventional inductive coil spark plug and a nanosecond repetitively pulsed (NRP) plasma discharge system previously demonstrated to accelerate early flame propagation. The baseline PC design featured a funnel shaped internal volume with a PC tip that contained six radial nozzles and a larger central axial nozzle. Two additional PC tip geometries were evaluated where either the baseline internal volume was increased or the axial nozzle was removed and the radial nozzle diameters were increased. A sweep of charge equivalence ratios ( ϕ) from nearly stoichiometric to the lean limit was performed for a fixed engine speed (1300 revolutions per minute), and engine load (3.5 bar gross indicated mean effective pressure). Time-resolved PC and main chamber (MC) pressure data as well as MC emissions data were collected to analyze engine performance and emissions characteristics. Combustion in the MC was further investigated using high-speed excited methylidyne radical (CH*) chemiluminescence imaging. Collected results highlighted that while all PC tips and ignition systems exhibited similar performance and emissions down to ϕ = 0.8, relevant differences in thermal efficiency and emissions for leaner charge mixtures were observed, with the results highly dependent on the nozzle pattern and ignition system. Major deviations were correlated to preferential de-pressurization of the PC through the axial nozzle for lean conditions that was not observed for mixture conditions closer to stoichiometric. Results show that a combination of radial and axial nozzle patterns in the PC extended lean-stability limits at the low-load condition evaluated. Further benefits were observed with the use of NRP ignition systems due to faster combustion within the PC volume provided that the volume was sufficiently large.

Di Sabatino, Francesco↗
DOE OSTI2020

Accelerating Learning with Set-Based Concurrent Engineering

The traditional design approach for product development is to develop a design based on customer requirements and technical knowledge, build the product according to the detail requirements provided, and then test the product to validate that it works as intended. The team typically starts by identifying a single design approach and spends their time validating a single design during testing. Design teams often encounter issues in the course of development with performance, manufacturability, interfaces and more. To compensate for test failures, teams often build in time into the schedule for additional design loopbacks. Further, when the loopbacks lead to change, the late changes are costly and risky, causing the team to focuses on "fixing the bare minimum" to meet cost and schedule expectations.

42 ENGINEERING↗
DOE OSTI2020

Dispenser Reliability: Materials R&D. A Hydrogen Fueling Infrastructure Research and Station Technology (H2FIRST) Report

Dispensers are the top cause of maintenance events and down-time at hydrogen fueling stations. In an effort to help characterize and enable improvements in dispenser reliability, an extensive accelerated lifetime testing set-up was designed and built at NREL involving components typically part of dispensing operations at fueling stations. Device Under Test (DUTs) included different components such as normally open valves, normally closed valves, fueling nozzles, breakaways devices and filters. Conditions of testing included pressures, and flow rates similar to light duty fuel cell electric vehicles fueling at -40°C, and -20°C for thousands of cycles in hydrogen. Tested components (failed and non-failed) were disassembled at SNL and polymeric O-rings were carefully retrieved and cataloged for chemical and physical characterization. Data collected was compared to similar O-rings from unexposed or non-tested components for hydrogen effects, and failure modes. Degradation analyses, based on select polymer chemistries common across all component types, their location within components, visual assessment of damage coupled with strong hydrogen effects from chemical characterization, was completed and presented to NREL and DOE. Overall, the failure rate amongst the components was not as high as expected for the test conditions. Among the component types tested, breakaways were the most susceptible to damage under these test conditions, with fueling nozzles a close second. The proper combination of selection of the right polymer and optimum component design was found to make a strong difference in component reliability under severe dispenser operating conditions. Physical degradation of polymers, rather than chemical changes due to low temperature hydrogen exposure, is more prevalent as failure mode for these test conditions. The nature and the extent of the degradation was much less at -20°C as compared to -40°C. The damage and failure rates were higher at lower temperatures than at higher test temperatures. As expected, increasing the number of cycles at the lowest test temperature (-40°C) increased damage. This indicates that cycling at the low temperature of -40°C required by SAE J2601 can reduce component life in fuel dispensing operations

08 HYDROGEN↗
DOE OSTI2024

Zero-RK Acceleration of Low-Life-cycle Carbon Fuel (LLFC)Simulations

Designing modern combustion systems now relies on computer models that predict how changes in design will affect performance. These models have replaced older methods that relied on the designer’s intuition or costly and time-consuming physical testing. By using improved models, design cycles can be shortened and cleaner and more efficient combustion devices can be created. This project aims to improve computer simulations of low-life-cycle carbon fuels (LLCFs) with the goal of making these simulations faster and more accurate for predicting combustion in vehicles.

02 PETROLEUM↗
DOE OSTI2026

Brochure for the DOE Office of Science Workshop on Envisioning Frontiers in AI and Computing for Biological Research

In February of 2025 a joint ASCR/BER workshop was held to identify key transformational research directions for understanding biology using artificial intelligence (AI), digital twins and high-performance (HPC) computational methods to facilitate scientific discovery and innovation in support of the Department of Energy mission. AI technologies offer exciting new groundbreaking methods to analyze large volumes of complex biological data, thereby greatly accelerating the ability to understand, predict, and design biological processes for beneficial purposes. In the laboratory, the bridging of AI-enabled automated experimental technologies, HPC and digital twins will provide potent tools for researchers to explore the fundamental nature of biology and harness its inherent metabolic potential for a variety of beneficial purposes. The focus of this workshop was on how high-performance computational methods can impact this objective by exploring digital twins, foundational models, and data-driven approaches with applications to advance automated laboratory experiments, modeling of complex living systems and engineering new functions into plants and microbial systems relevant to DOE mission. Workshop attendees with expertise in plant science, microbiology, mathematics, computer science, and AI assessed the current state of the science, trends, and AI challenges at the interface of plant and microbial systems biology and computational science to identify opportunities for high-impact research. This collaborative effort capitalized on ASCR's advancements in applied mathematics, computer science, and Exascale systems, and BER's expertise in basic genomics-enabled research on DOE relevant plant and microbial systems. The workshop culminated in four key priority research directions to guide future research and development within DOE Office of Science programs.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Advancing 1D thermo-hydraulic tools for large cryogenic facilities

The Cryogenic Division at Fermilab develops large-scale cryogenic systems for particle accelerators and superconducting test facilities. To support design and diagnostics, a Python-based code was created to calculate pressure drops in components such as valves and pipes. This paper presents recent enhancements to the code, including new heat transfer functions that improve the accuracy of thermal and hydraulic predictions. The first application models pressure and temperature changes in PIP-II relief pipes, aiding pipe sizing and protecting relief valves. The second example analyzes heat load evolution in a pipe carrying sub-atmospheric helium, helping interpret temperature sensor data and understand gas return behavior to cold compressors. These improvements significantly expand the tool’s capabilities, offering a practical resource for designing and troubleshooting cryogenic systems under dynamic thermal and flow conditions.

Beckwith, Rosalyn [Fermilab]↗
DOE OSTI2025

Hybrid learning techniques for scientific data reduction with performance guarantees

The research initiatives supported by the U.S. Department of Energy (DOE) Grant DE-SC0022265 are fundamentally aimed at pioneering advanced machine learning (ML) techniques for scientific data compression within high-performance computing (HPC) environments. This comprehensive body of work addresses the critical challenge posed by the exponential growth of data generated by scientific simulations in domains such as fusion energy, climate modeling, and computational fluid dynamics (CFD). A core objective is to develop compression algorithms that achieve substantial data reduction—often by orders of magnitude—while rigorously ensuring the fidelity of both the primary data (PD) and scientifically crucial derived quantities of interest (QoI). The methodologies deployed under this grant integrate sophisticated deep learning architectures, prominently featuring autoencoders, advanced generative models like conditional diffusion, and hybrid learning techniques. Key innovations include the development of Guaranteed Autoencoders (GAE) and the Guaranteed Conditional Diffusion with Tensor Correction (GCDTC) framework, which provide explicit, instance-level error bounds on reconstructed data. Furthermore, specialized strategies such as nonlinear constraint satisfaction are employed to preserve the integrity of QoI, a vital requirement for the trustworthiness of downstream scientific analyses. This research also focuses on the design and implementation of scalable, GPU-accelerated software pipelines that seamlessly integrate into existing HPC workflows, ensuring both computational efficiency and practical applicability. The CAESAR framework, for example, unifies foundation and generative models to create an adaptive and efficient compression solution for spatio-temporal scientific data. Collectively, these efforts represent a significant advancement in mitigating the scientific data deluge, enabling more effective data management, accelerated scientific discovery, and optimized utilization of HPC resources.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Final report- UFL - RAPIDS2: A SciDAC Institute for Computer Science, Data, and Artificial Intelligence

The research initiatives supported by the U.S. Department of Energy (DOE) Grant DE-SC0022265 are fundamentally aimed at pioneering advanced machine learning (ML) techniques for scientific data compression within high-performance computing (HPC) environments. This comprehensive body of work addresses the critical challenge posed by the exponential growth of data generated by scientific simulations in domains such as fusion energy, climate modeling, and computational fluid dynamics (CFD). A core objective is to develop compression algorithms that achieve substantial data reduction—often by orders of magnitude—while rigorously ensuring the fidelity of both the primary data (PD) and scientifically crucial derived quantities of interest (QoI). The methodologies deployed under this grant integrate sophisticated deep learning architectures, prominently featuring autoencoders, advanced generative models like conditional diffusion, and hybrid learning techniques. Key innovations include the development of Guaranteed Autoencoders (GAE) and the Guaranteed Conditional Diffusion with Tensor Correction (GCDTC) framework, which provide explicit, instance-level error bounds on reconstructed data. Furthermore, specialized strategies such as nonlinear constraint satisfaction are employed to preserve the integrity of QoI, a vital requirement for the trustworthiness of downstream scientific analyses. This research also focuses on the design and implementation of scalable, GPU-accelerated software pipelines that seamlessly integrate into existing HPC workflows, ensuring both computational efficiency and practical applicability. The CAESAR framework, for example, unifies foundation and generative models to create an adaptive and efficient compression solution for spatio-temporal scientific data. Collectively, these efforts represent a significant advancement in mitigating the scientific data deluge, enabling more effective data management, accelerated scientific discovery, and optimized utilization of HPC resources.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

High-Efficiency Solar-To-Fuel Photoelectrochemistry in Disordered Photonic Glass Electrodes (Final Technical Report)

This project investigated how photonic glass (PG) photoelectrodes—disordered arrangements of dielectric scatterers—can serve as scalable, tunable platforms for light trapping in photoelectrochemical (PEC) solar-to-fuel systems. By leveraging disorder-driven optical phenomena such as multiple scattering resonances and light localization, PG structures offer an alternative to conventional photonic crystals and inverse opals that require high structural precision. The scientific goals were to twofold: (1) develop approaches to predictive models for high performance PG electrodes based on light absorption simulations, and (2) fabricate, characterize, and optimize PG-based photoelectrodes for solar-to-hydrogen and solar-to-fuel photoelectrochemical applications. To overcome the complexity of ensemble optical simulations for disordered materials, the researchers developed a machine-learning-accelerated emulation of all configurations in the design space. With this approach, PG photoelectrodes based on a TiO2 semiconductor were designed to enhance PEC currents of up to one hundred times higher than the equivalent ultra-thin film photoanodes and several times higher than the equivalent photonic crystal. The research also explored integrated systems for electrochemical hydrogen production based on replacing water oxidation with the specific glycerol oxidation electrocatalysis. Overall, the project outlined an approach to a simple-to-fabricate photoelectrode system to drive photoelectrochemical reactions relevant to solar photochemical energy conversion.

14 SOLAR ENERGY↗
DOE OSTI2025

Performance Optimization of the IOTA Duoplasmatron Proton Source

We present results from online optimization studies of a duoplasmatron ion source designed to produce 50~keV protons for acceleration to 2.5~MeV and subsequent injection into the Integrable Optics Test Accelerator (IOTA) at Fermilab. Using a Bayesian exploration technique, we developed multi-parameter models of the source s proton current and employed these models to optimize its performance. Depending on the spectrometer configuration used to isolate the proton beam and the chosen optimization objective, we identified three candidate operating points, achieving normalized 50~\% emittances between 0.57 and 1.3~\textmu m and a maximum proton current of $14.5 \pm 0.6$~mA.

Banerjee, Nilanjan [Fermilab] (ORCID:0000000344660↗
DOE OSTI2026

Architector 2.0: Expanded Capabilities for Metal Complex Engineering

Automated three-dimensional molecular construction from two-dimensional graph representations is critical to high-throughput discovery eIorts. Software capabilities in this area have accelerated research across fields ranging from protein design and drug discovery to transition metal catalyst development. When Architector was first introduced, it uniquely enabled high-throughput, chemically relevant three-dimensional construction of f-element complexes. Since its introduction, Architector has been applied in large-scale computational campaigns, targeted studies in critical mineral extraction, and artificial intelligence-driven discovery eIorts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Clearing a Path to Commercialization of Marine Renewable Energy Technologies Through Public–Private Collaboration

Governments are increasingly turning toward public–private partnerships to bring industry support to improving public assets or services. Here, we describe a unique public–private collaboration where a government entity has developed mechanisms to support public and private sector advancement and commercialization of monitoring technologies for marine renewable energy. These support mechanisms include access to a range of skilled personnel and test facilities that promote rapid innovation, prove reliability, and inspire creativity in technology development as innovations move from concept to practice. The ability to iteratively test hardware and software components, sensors, and systems can accelerate adoption of new methods and instrumentation designs. As a case study, we present the development of passive acoustic monitoring technologies customized for operation in energetic waves and currents. We discuss the value of testing different systems together, under the same conditions, as well as the progression through different test locations. The outcome is multiple, complementary monitoring technologies that are well suited to addressing an area of high environmental uncertainty and reducing barriers to responsible deployment of low-carbon energy conversion systems, creating solutions for the future.

16 TIDAL AND WAVE POWER↗