SEARCH · Engineering Papers

Results for “Technique Development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Scan line graphics generation on the massively parallel processor

Described here is how researchers implemented a scan line graphics generation algorithm on the Massively Parallel Processor (MPP). Pixels are computed in parallel and their results are applied to the Z buffer in large groups. To perform pixel value calculations, facilitate load balancing across the processors and apply the results to the Z buffer efficiently in parallel requires special virtual routing (sort computation) techniques developed by the author especially for use on single-instruction multiple-data (SIMD) architectures.

Dorband, John E.↗

NASA NTRS1990

Aeolian removal of dust from photovoltaic surfaces on Mars

It is well documented that Mars is totally engulfed in huge dust storms nearly each Martian year. Dust elevated in these global dust storms, or in any of the numerous local dust storms could settle on photovoltaic surfaces and seriously hamper photovoltaic power system performance. Using a recently developed technique to uniformly dust simulated photovoltaic surfaces, samples were subjected to Martian-like winds in an attempt to determine whether natural aeolian processes on Mars would sweep off the settled dust. The effects of wind velocity, angle of attack, height off the Martian surface, and surface coating material were investigated. Principles which can help to guide the design of photovoltaic arrays bound for the Martian surface were uncovered. Most importantly, arrays mounted with an angle of attack approaching 45 deg show the most efficient clearing. Although the angular dependence is not sharp, horizontally mounted arrays required significantly higher wind velocities to clear off the dust. From the perspective of dust-clearing it appears that the arrays may be erected quite near the ground, but previous studies have suggested that saltation effects can be expected to cause such arrays to be covered by sand if they are set up less than about a meter from the ground. Providing that the surface chemistry of Martian dusts is comparable to our test dust, the materials used for protective coating may be optimized for other considerations such as transparency, and chemical or abrasion resistance. The static threshold velocity is low enough that there are regions on Mars which experience winds strong enough to clear off a photovoltaic array if it is properly oriented. Turbulence fences proved to be an ineffective strategy to keep dust cleared from the photovoltaic surfaces.

Gaier, James R.↗

NASA NTRS1990

Institute for Computational Mechanics in Propulsion (ICOMP) fourth annual review, 1989

The Institute for Computational Mechanics in Propulsion (ICOMP) is operated jointly by Case Western Reserve University and the NASA Lewis Research Center. The purpose of ICOMP is to develop techniques to improve problem solving capabilities in all aspects of computational mechanics related to propulsion. The activities at ICOMP during 1989 are described.

Source record↗

NASA NTRS1990

Laboratory measurements and modeling of microwave absorption by ammonia in gas mixtures applicable to giant planet atmospheres

Accurate knowledge of the microwave absorption behavior of ammonia is critical to the correct interpretation of radio astronomical and radio occultation data from the giant planets. New cavity resonator techniques developed at the Stanford Center for Radar Astronomy have allowed accurate laboratory measurements of the microwave absorptivity and refractivity spectra of gas mixtures containing trace amounts of ammonia. A parameterized version of the modified Ben-Reuven formalism of Berge and Bulkis was optimized to fit the new data. The new formalism produced by this method predicts ammonia absorptivity much more accurately than previous formalism over a significant range of conditions.

Spilker, T. R.↗

NASA NTRS1989

Measurement of interfacial shear strength in SiC-fiber/Si3N4 composites

An indentation method for measuring shear strength in brittle matrix composites was applied to SiC-fiber/Si3N4-matrix samples. Three methods were used to manufacture the composites: reaction bonding of a Si/SiC preform, hot-pressing, and nitrogen-overpressure sintering. An indentation technique developed by Marshall for thin specimens was used to measure the shear strength of the interface and the interfacial friction stresses. This was done by inverting the sample after the initial push through and retesting the pushed fibers. SEM observations showed that the shear strength was determined by the degree of reaction between the fiber and the matrix unless the fiber was pushed out of its (well-bonded) sheath.

Laughner, James W.↗

NASA NTRS1990

Satellite altimeter calibration techniques

This paper examines calibration techniques which can most effectively satisfy the requirements of future satellites carrying high-accuracy radar altimeters, such as the ESA ERS-1 and the NASA/CNES Topex/Poseidon satellites scheduled for launch during the next five years. The calibration accuracies and the advantages and disadvantages of the four currently proposed calibration techniques for over-water calibration are discussed: (1) a tide gauge on a tower at-sea and a nearby laser, (2) a laser and a tide gauge on an island with an offshore satellite pass and a geoid tie between the satellite ground track and the laser, (3) a tide gauge on a tower at-sea with satellite positioning from multiple lasers and a GPS, and (4) a laser and a tide gauge on a tower at-sea. Error budgets for these techniques, developed on the basis of state-of-the-art tracking systems, were found to have one sigma height uncertainties in the 2.8 to 4.9 cm range.

Kolenkiewicz, R.↗

NASA NTRS1988

Patch structured surface grid with dynamic curvature clustering

The numerical technique developed by Eiseman (1985) to generate surface grids with lines clustered in areas of greater curvature is described and demonstrated. This approach combines the direct active use of surface curvature with a mean-value relaxation scheme and multigrid methods; it permits an arbitrary number of patches to be organized in a single integer array based on a patch number, an edge number, and a boundary-condition index. Grids for typical CFD applications are presented and briefly characterized.

Wang, YI↗

NASA NTRS1990

Sensitivity of the transmission zeros of flexible space structures

The new pole/zero cancellation technique developed for the problem of sensitivity and robustness in vibration isolation systems for flexible spacecraft requires an analysis of the sensitivity of transmission zeros. This paper analyzes the sensitivity of the transmission zeros of flexible structures with compatible sensors and actuators, in terms of partial derivatives and condition numbers. It is shown that, in both measures, the sensitivities of the zeros of such a system are closely related to those of its poles. It is also shown that the closed-loop poles produced by applying the pole/zero cancellation to the structure have sensitivities approaching those of the zeros, so that these are given by the sensitivities of the open-loop poles. Examples are presented that illustrate these points.

Williams, Trevor↗

NASA NTRS1989

Design of an orbital debris radar ground demonstration

A breadboard radar system is being designed and tested at NASA Johnson for dealing with the space debris problem that could present a growing threat to Space Station Freedom. The major design problems are due to the small radar cross section of such debris (below -30 dBm2), the high closing velocities of the particles with respect to the Space Station (10 km/sec and higher), and the stringent weight, power-consumption, maintenance, and reliability constraints on spaceborne systems. Consideration is given to the preliminary implementation of a ground demonstration radar for testing concepts, technologies, and performance envelopes for application to the space-borne debris detection and tracking radar. Simulation results and techniques developed for predicting system performance and for evaluating antenna parameters are given. The design process of the electronically steered phased array antenna is briefly described, and block diagrams for the implementation of the radar system are given.

Paz, I.↗

NASA NTRS1990

Lunar astronomical observatories - Design studies

The best location in the inner solar system for the grand observatories of the 21st century may be the moon. A multidisciplinary team including university students and faculty in engineering, astronomy, physics, and geology, and engineers from industry is investigating the moon as a site for astronomical observatories and is doing conceptual and preliminary designs for these future observatories. Studies encompass lunar facilities for radio astronomy and astronomy at optical, ultraviolet, and infrared wavelengths of the electromagnetic spectrum. Although there are significant engineering challenges in design and construction on the moon, the rewards for astronomy can be great, such as detection and study of earth-like planets orbiting nearby stars, and the task for engineers promises to stimulate advances in analysis and design, materials and structures, automation and robotics, foundations, and controls. Fabricating structures in the reduced-gravity environment of the moon will be easier than in the zero-gravity environment of earth orbit, as Apollo and space-shuttle missions have revealed. Construction of observatories on the moon can be adapted from techniques developed on the earth, with the advantage that the moon's weaker gravitational pull makes it possible to build larger devices than are practical on earth.

Johnson, Stewart W.↗

NASA NTRS1990

Remote sensing of tropical forests - An overview of research and applications using non-photographic sensors

A comprehensive overview is presented on how remote sensing technology has been applied to tropical forest monitoring over the past 20 years. Research needs for monitoring the condition and extent of tropical forests are suggested. The discussion focuses on nonphotographic sensors, especially those on orbiting satellites. Several remote sensing approaches to tropical forest monitoring are outlined, including NOAA AVHRR, Landsat MSS, the Landsat Thematic Mapper, SPOT-1, and Synthetic Aperture Radar. Suggested research needs are addressed, along with discussions on the use of Geographic Information Systems, and multistage and multisensor approaches in data analysis and acquisition. It is concluded that additional research and technique development is urgently needed to advance the utility of remotely sensed data for tropical forest monitoring. However, there is sufficient information available now to prototype a global tropical forest monitoring system that would utilize current satellite sensors complemented with airborne sensors for detailed measurements on sample locations.

Sader, Steven A.↗

NASA NTRS1991

Generalized Covariance Analysis For Remote Estimators

Technique developed to predict true covariance of stochastic process at remote location when control applied to process both by autonomous (local-estimator) control subsystem and remote (non-local-estimator) control subsystem. Intended orginally for design and evaluation of ground-based schemes for estimation of gyro parameters of Magellan spacecraft. Applications include variety of remote-control systems with and without delays. Potential terrestrial applications include navigation and control of industrial processes.

Boone, Jack N.↗

NASA NTRS1991

Simulation Of Flow In A Turbine Cascade

Report discusses application of lower-upper (LU) implicit numerical-integration scheme, together with interactive grid-generation method, to simulation of inviscid, compressible flow in two-dimensional model of turbine cascade. Study part of continuing effort to develop techniques for computation of complicated three-dimensional flows in turbomachinery.

Choo, Yung K.↗

NASA NTRS1991

Optimum Platinum Loading In Pt/SnO2 CO-Oxidizing Catalysts

Platinum on tin oxide (Pt/SnO2) good catalyst for oxidation of carbon monoxide at or near room temperature. Catalytic activity peaks at about 17 weight percent Pt. Catalysts with platinum loadings as high as 46 percent fabricated by technique developed at Langley Research Center. Work conducted to determine optimum platinum loading for this type of catalyst. Major application is removal of unwanted CO and O2 in CO2 lasers.

Schryer, David R.↗

NASA NTRS1990

Trends in solar variability

Radiocarbon (delta C-14) records suggest a 200-year periodicity in solar activity in the last millennium. Researchers examined the Carbon-14 record going back 8 millennia for this and other periodicities. The computation differs from that in most previous work in its use of techniques developed for unevenly spaced sampling without rebinning the data to equally spaced intervals. A variation with a 200-year period is a strong feature of the Carbon-14 record going back several millennia. Periodicities that appear to be significant are listed and their physical interpretation discussed.

Jastrow, Robert↗

NASA NTRS1990

Multiband radar characterization of forest biomes

The utility of airborne and orbital SAR in classification, assessment, and monitoring of forest biomes is investigated through analysis of orbital synthetic aperature radar (SAR) and multifrequency and multipolarized airborne SAR imagery relying on image tone and texture. Preliminary airborne SAR experiments and truck-mounted scatterometer observations demonstrated that the three dimensional structural complexity of a forest, and the various scales of temporal dynamics in the microwave dielectric properties of both trees and the underlying substrate would severely limit empirical or semi-empirical approaches. As a consequence, it became necessary to develop a more profound understanding of the electromagnetic properties of a forest scene and their temporal dynamics through controlled experimentation coupled with theoretical development and verification. The concatenation of various models into a physically-based composite model treating the entire forest scene became the major objective of the study as this is the key to development of a series of robust retrieval algorithms for forest biophysical properties. In order to verify the performance of the component elements of the composite model, a series of controlled laboratory and field experiments were undertaken to: (1) develop techniques to measure the microwave dielectric properties of vegetation; (2) relate the microwave dielectric properties of vegetation to more readily measured characteristics such as density and moisture content; (3) calculate the radar cross-section of leaves, and cylinders; (4) improve backscatter models for rough surfaces; and (5) relate attenuation and phase delays during propagation through canopies to canopy properties. These modeling efforts, as validated by the measurements, were incorporated within a larger model known as the Michigan Microwave Canopy Scattering (MIMICS) Model.

Dobson, M. Craig↗

NASA NTRS1990

Aeolian Removal of Dust Types from Photovoltaic Surfaces on Mars

Dust elevated in local or global dust storms on the Martian surface could settle on photovoltaic (PV) surfaces and seriously hamper their performance. Using a recently developed technique to apply a uniform dust layer, PV surface materials were subjected to simulated Martian winds in an attempt to determine whether natural aeolian processes on Mars would sweep off the settled dust. Three different types of dust were used. The effects of wind velocity, angle of attack, height above the Martian surface, and surface coating material were investigated. It was found that arrays mounted on an angle of attack approaching 45 deg show the most efficient clearing. Although the angular dependence is not sharp, horizontally mounted arrays required much higher wind velocities to clear off the dust. From this test it appears that the arrays may be erected quite near the ground, but previous studies have suggested that saltation effects can be expected to cause such arrays to be covered by soil if they are set up less than about a meter from the ground. Particle size effect appear to dominate over surface chemistry in these experiments, but additional tests are required to confirm this.

Gaier, James R.↗

NASA NTRS1991

Institute for Computational Mechanics in Propulsion (ICOMP)

The Institute for Computational Mechanics in Propulsion (ICOMP) is operated jointly by Case Western Reserve University and the NASA Lewis Research Center in Cleveland, Ohio. The purpose of ICOMP is to develop techniques to improve problem-solving capabilities in all aspects of computational mechanics related to propulsion. The activities at ICOMP during 1990 are described.

Feiler, Charles E.↗