Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TUBING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Double-wall tubing for oil recovery

Insulated double-wall tubing designed for steam injection oil recovery makes process more economical and allows deeper extension of wells. Higher quality wet steam is delivered through tubing to oil deposits with significant reductions in heat loss to surrounding rock allowing greater exploitation of previously unworkable reservoirs.

Back, L. H.↗

Coupled-cavity traveling-wave tubes

Computer program is developed for analysis of coupled cavity traveling waves tubes (TWT's) which are used in variety of radar and communications applications. Programmers can simulate tubes of arbitrary complexity such as input and output couplers and other features peculiar to one or few cavities which may be modeled by correct choices of input data.

Connolly, D. J.↗

Experimental perfect-gas study of expansion-tube flow characteristics

Results of an experimental investigation of expansion tube flow characteristics performed with helium test gas and acceleration gas are presented. The use of helium, eliminates complex real gas chemistry in the comparison of measured and predicted flow quantities. The driver gas was unheated helium at a nominal pressure of 33 MN sq m. The quiescent test gas pressure and quiescent acceleration gas pressure were varied from 0.7 to 50 kN/sq m and from 2.5 to 53 N/sq m, respectively. The effects of tube-wall boundary layer growth and finite secondary diaphragm opening time were examined through the variation of the quiescent gas pressures and secondary diaphragm thickness. Optimum operating conditions for helium test gas were also defined.

Shinn, J. L.↗

A fixed tilt solar collector employing reversible vee-through reflectors and evaluated tube receivers for solar heating and cooling systems

The Vee-Trough/Evacuated Tube Collector (VTETC) was analyzed rigorously and various mathematical models were developed to calculate the optical performance of the vee-trough concentrators, and the quasi-steady state thermal performance of the evacuated tube receivers. Tests were run to verify the mathematical analyses. Back-silvered glass mirror, Alzak, Aluminized Teflon, and Kinglux (electropolished aluminum reflectors) were tested. Additional tests were run at temperatures ranging from 80 to 190 C (176-374 F). For the glass mirror reflectors, peak efficiencies, based on aperture area and operating temperatures of 125 C (257 F), were over 40%. Efficiencies of about 40% were observed at temperatures of 150 C (302 F) and 30% at 175 C (347 F). Test data for several days, predicted daily useful heats, and efficiency values are presented for a full year. These theoretical values were then compared with actual data points for the same temperature range.

Selcuk, M. K.↗

Image tube spectra of Pluto and Triton from 6800 to 9000 A

A three-stage Varo image tube was used to obtain spectra of Pluto and Triton as well as comparison stars for the spectral region from 6800 to 9000 A, and the question of whether an adsorption feature near 8900 A indicates the presence of an atmosphere is considered. The feature, more definitive for Pluto than for Triton, occurs in a wavelength region which produces a steeply diminishing response in the image tube. If certain conditions are assumed, the pressure indicated by the feature is the pressure that can be expected from the equilibrium vapor pressure of a methane frost. If the absorption is spurious, the analysis indicates upper limits for methane on Pluto and Triton.

Benner, D. C.↗

Shock tube and shock wave research; Proceedings of the Eleventh International Symposium, University of Washington, Seattle, Wash., July 11-14, 1977

Papers are presented on the applications of shock-wave technology to the study of hydrodynamics, the use of the pressure-wave machine for charging diesel engines, and measurements of the heat-transfer rate in gas-turbine components. Consideration is given to shock propagation along 90-degree bends, the explosive dissemination of liquids, and rotational and vibrational relaxation behind weak shock waves in water vapor. Shock phenomena associated with expansion flows are described and stratospheric-related research using the shock tube is outlined. Attention is given to shock-wave ignition of magnesium powders, Mach reflection and boundary layers, and transition in the shock-induced unsteady boundary layer on a flat plate. Shock-tube measurements of induction and post-induction rates for low-Btu gas mixtures are presented and shock-initiated ignition in COS-N2O-Ar mixtures is described. Cluster growth rates in supersaturated lead vapor are presented and a study of laser-induced plasma motion in a solenoidal magnetic field is reviewed.

Ahlborn, B.↗

Stratospheric-related research using the shock tube

The capabilities of shock tubes used in stratospheric-related research are considered, and the results of three independent shock tube research projects are reported. The studies are concerned with the evaluation of stratospheric ozone depletion. In the first experiment, photoabsorption cross sections of Freon 11 and 12 at stratospheric temperatures were measured using rarefaction waves. In the second experiment, reaction-rate coefficients were determined from measurements made behind reflected shock waves. In the third experiment, electronic-transition moments of the O2 Schumann-Runge system and the A2Pi-X2Pi system of ClO were deduced from intensity measurements made behind the incident shock.

Cooper, D. M.↗

A new look at performance capabilities of arc-driven shock tubes

High shock-tube velocities simulating Jovian entry have been achieved with arc-driver operation using a method of tailoring electrical circuit impedance to arc-plasma impedance. The concept of impedance matching also prescribes a requirement for minimum electrical capacitance. The technique of developing the strongest shock-generating capability for an arc-driver system with the least total energy is discussed. Several programs using the shock tube for developmental research in energy and industrial applications are outlined.

Dannenberg, R. E.↗

The Apollo 16 drive tube 60009/60010. I - Modal petrology

Detailed petrographic examination of 22 thin sections from the impregnated portion of the Apollo 16 double drive tube supports the findings of previous workers. A well-gardened unit exists at the top of 60010, indicated petrographically by an increase in agglutinates near the lunar surface. There is a coarse-grained anorthositic layer near the bottom of 60009. Few, if any, of the modal variations are stratigraphically correlatable with the deep drill core 60002-7, which was recovered 50 m southwest of drive tube 60009/60010.

Simon, S. B.↗

Evacuated-tube solar collector--performance evaluation

Report gives thermal performance test procedures and results for commercially produced, water-filled, 8-tube collectors. Tests include efficiency, time constant for temperature drop after solar flux is cut, change in efficiency as function of sun angle, and test to see if tubes break when filled with hot water.

Source record↗

Glycol/water evacuated-tube solar collector

Report describes performance of 8 tube and 10 tube commercially produced solar collectors. Tests include thermal efficiency, time constant for temperature drop after solar flux is cut, change in efficiency with Sun angle, and temperature rise if circulation is stopped.

Source record↗

Test fittings for dimensionally critical tubes

Method using lightweight fitting protects tubes and tube stubs during testing and through to final welding. Fitting does not interfere with final welding or brazing like temporary test fittings, and is not heavy like machined-on integral fittings with face-seal 0-rings. Fitting approach is adaptable to many types of components, including valves, transducers, and filters.

Hagler, R.↗

Shrinking plastic tubing and nonstandard diameters

Process allows larger-than-normal postshrink diameters without splitting. Tetrafluoroethylene tubing on mandrel is supported within hot steel pipe by several small diameter coil sections. Rising temperature of mandrel is measured via thermocouple so assembly can be removed without overshrinking (and splitting) of tubing.

Ruiz, W. V.↗

Sunspots and the physics of magnetic flux tubes. VIII - Overstability in a magnetic field in a downdraft

The dynamical properties of convective overstability in a vertical magnetic field with a downdraft are considered. A variety of effects is illustrated. The overstability produces Alfven waves propagating both upward or downward along the magnetic field. The favored direction of emission may be upward or downward depending upon the magnitude of the heat transport coefficient. The largest asymmetry is produced by a difference in reflectivity between the upper and lower boundaries. It is shown that a very modest reflection coefficient of the upper boundary, with no reflection at the lower boundary, causes most of the waves to be emitted downward, and vice versa. Applying these results to the flux tubes extending up through the convective zone of the Sun, it follows that those flux tubes are dynamically active beneath the surface, as suggested earlier by ourselves and others, but there is no reason to expect any significant wave flux to appear in the field above the surface. The waves propagate downward into the Sun and are presumably dispersed there by the nonlinear interaction with the turbulent convection, etc.

Parker, E. N.↗

Analysis and two years of testing of the vee-trough concentrator/evacuated tube solar collector

The paper summarizes the mathematical analysis and presents the experimental results for a vee-trough/evacuated tube collector (VTETC). Test results reported represent the performance of the VTETC based on an aperture area. The effectiveness of vee-trough reflectors is demonstrated by comparing the useful heat collected by a receiver tube with and without concentrators.

Selcuk, M. K.↗

Shock-tube studies of radiative base heating of Jovian probe

A 6.4-cm-diameter scale model of the Jovian entry vehicle is tested in an electric-arc-driven shock tube and a 5-cm-diameter sphere model is tested in a combustion-driven shock tube and in an electric-arc-driven shock tunnel. The radiative heat-transfer rate and pressure on the front and the base regions are measured in the absence of ablation with sensors imbedded in the models in a stream consisting of 10% hydrogen in a bath of either neon or argon. The measured radiative heat-transfer rates and pressures range to about 22 kW/sq cm and 12 atm, respectively, at the front stagnation point. The ratio of the radiative heat-transfer rate at the base stagnation point to that at the front stagnation point is found to be about 1/4 for the sphere at Mach 1.8, about 1/30 for the sphere at Mach 4.8, and about 1/6 for the scale model at Mach 1.7. The present experimental results agree well with the theoretical predictions of Park, thus indicating that Park's theory is valid.

Shirai, H.↗

Experimental determination of the admittances of aluminized propellants by the impedance tube method

The adaptation of the impedance tube concept for the determination of the pressure coupled admittances and response functions of burning solid propellants is discussed. The results obtained in experiments with UTP-3001 and UTP-19360 aluminized propellants are presented. It is shown that the admittance Y remains constant during the quasi-steady burn period of a test, indicating constant driving of the gas phase disturbance by the burning solid propellant. The measured real part of the admittance is positive, indicating that the burning aluminized propellant is driving the gas phase oscillations. In addition, the measured high gas phase damping, provided by the aluminum oxide particles in the gas phase, suggests that the latter can significantly increase the damping in unstable solid rockets over the investigated frequency range. Finally, it is shown that the wave structure obtained by numerically solving the impedance tube wave equations which utilize the determined propellant admittance as an initial condition and the determined value of G to describe the gas phase losses is in excellent agreement with the measured wave structure.

Baum, J. D.↗