Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Geomagnetism of earth's core

Instrumentation, analytical methods, and research goals for understanding the behavior and source of geophysical magnetism are reviewed. Magsat, launched in 1979, collected global magnetometer data and identified the main terrestrial magnetic fields. The data has been treated by representing the curl-free field in terms of a scalar potential which is decomposed into a truncated series of spherical harmonics. Solutions to the Laplace equation then extend the field upward or downward from the measurement level through intervening spaces with no source. Further research is necessary on the interaction between harmonics of various spatial scales. Attempts are also being made to analytically model the main field and its secular variation at the core-mantle boundary. Work is also being done on characterizing the core structure, composition, thermodynamics, energetics, and formation, as well as designing a new Magsat or a tethered satellite to be flown on the Shuttle.

Benton, E. R.↗

Effect of driven-wall motion on a turbulent boundary layer

An acoustically driven wall model with amplitudes greater than 0.01 cm was used to study the effect of unsteady wall boundary conditions on the structure of a zero-pressure-gradient turbulent boundary layer. Hot-wire measurements showed large variations in fluctuation quantities (including Reynolds stress) along each model wave. These longitudinal variations decreased rapidly with increasing distance from the driven wall, but the average level of these fluctuations decreased only slightly even outside the boundary layer. When the acoustical fluctuations were subtracted, the remaining fluctuations were essentially the same as for the undriven model. It is concluded that there is no significant interaction between the acoustic and turbulent fluctuations.

Weinstein, L. M.↗

The disturbance flow field produced by an evolving vortex

The flow field of a vortex in a viscous shear flow is found by constructing a uniformly valid asymptotic expansion consisting of an inner solution field represented, to lowest order, by a two dimensional, nonliner, inviscid Stuart vortex and an outer solution field represented, to lowest order, by either a two dimensional parallel or self similar viscous flow. The technique involves scaling both the transverse and streamwise coordinates in the vicinity of the vortex as well as allowing for a slow variation of the outer viscous flow. Criteria are established for both the size of the vortical structure and proximity to the boundary surfaces. The composite solution is a consistent mathematical picture of the flow field at a fixed streamwise location as the vortical structure evolves past this point. Such a formulation is also useful in the specification of boundary or initial conditions in numerical fluid dynamic calculations, where an inconsistent setting of these conditions leads to spurious results for rather long computation times.

Gatski, T. B.↗

Magnetospheric pulsations observed by ISEE 1 and 2 satellites

The ISEE 1 and 2 spacecraft studied whether observed amplitude variations in hydromagnetic waves were due to the motion of the spacecraft through a time stationary structure or were due to temporal changes. The data provide evidence for spatially limited standing hydromagnetic wave resonant regions. The standing wave harmonic and Poynting vector were deduced from the simultaneous observations of the wave magnetic and electric field.

Singer, H. J.↗

Waveform synthesis of surface waves in a laterally heterogeneous earth by the Gaussian beam method

The present investigation is concerned with an application of the Gaussian beam method to surface waves in the laterally heterogeneous earth. The employed method has been developed for ray tracing and synthesizing seismograms of surface waves in cases involving the laterally heterogeneous earth. The procedure is based on formulations derived by Yomogida (1985). Vertical structure of the wave field is represented by the eigenfunctions of normal mode theory, while lateral variation is expressed by the parabolic equation as in two-dimensional acoustic waves or elastic body waves. It is demonstrated that a large-amplitude change can result from a slight perturbation in the phase velocity model.

Yomogida, K.↗

Formation and detection of high latitude ionospheric irregularities

Measurements of Total Electron Content (TEC) and airglow variations show that large scale plasma patches appearing in the high-latitude ionsophere have irregular structures evidenced by the satellite phase and amplitude scintillations. Whistler waves, intense quasi-DC electric field, and atmospheric gravity waves can become potential sources of various plamsa instabilities. The role of thermal effects in generating ionospheric irregularities by these sources is discussed. Meter-scale irregularities in the ionospheric E and F regions can be excited parametrically with lower hybrid waves by intense whistler waves. Ohmic dissipation of Pedersen current in the electron gas is able to create ionospheric F region irregularities in plasma blobs or plasma patches (i.e., high ambient plasma density environment) with broad scale lengths ranging from tens of meters to a few kilometers. Through the neutral-charged particle collisions, gravity waves can excite large-scale (less than tens of kilometers) ionospheric irregularities simultaneously with forced ion acoustic modes in the E region. The large-scale ionospheric density fluctuations produced in the E region can extend subsequently alogn the earth's magnetic field to the F region and the topside ionospheric regions. These mechanisms characterized by various thermal effects can contribute additively with other processes to the formation of ionospheric irregularities in the high latitude region.

Lee, M. C.↗

Periodic amplitude variations in Jovian continuum radiation

An analysis of periodic variations in the amplitude of continuum radiation near 3 kHz trapped in the Jovian magnetosphere shows structure with periods near both five and ten hours. Contrary to a plausible initial idea, the continuum amplitudes are not organized by position of the observer relative to the dense plasma sheet. Instead, there seem to be preferred orientations of system III longitude with respect to the direction to the sun which account for the peaks. This implies a clock-like modulation of the continuum radiation intensity as opposed to a searchlight effect. The importance of the dipole longitude-solar wind alignment to the amplitude of the continuum radiation implies the source region of the radiation is near the magnetopause and may indirectly tie the generation of the radio waves to the clocklike modulation of energetic electron fluxes from Jupiter.

Kurth, W. S.↗

Laser techniques in high-pressure geophysics

Laser techniques in conjunction with the diamond-anvil cell can be used to study high-pressure properties of materials important to a wide range of problems in earth and planetary science. Spontaneous Raman scattering of crystalline and amorphous solids at high pressure demonstrates that dramatic changes in structure and bonding occur on compression. High-pressure Brillouin scattering is sensitive to the pressure variations of single-crystal elastic moduli and acoustic velocities. Laser heating techniques with the diamond-anvil cell can be used to study phase transitions, including melting, under deep-earth conditions. Finally, laser-induced ruby fluorescence has been essential for the development of techniques for generating the maximum pressures now possible with the diamond-anvil cell, and currently provides a calibrated in situ measure of pressure well above 100 gigapascals.

Hemley, R. J.↗

Submillimeter backward wave oscillators

A NASA program for the development of backward wave oscillators (BWOs) for the 500-2000 GHz frequency range is discussed. The BWO operation is based on a periodic etched slow wave structure which supports the induced traveling electromagnetic wave. The present submillimeter wave BWOs will employ a variation of the folded wave guide, the interdigital line. The use of a noncompressed electron beam results in less thermal loading of the circuit, smaller magnetic focusing fields, and higher current density of the circuit interaction region. The diamond etching procedure is described. Aluminum will be used for the metallization of the diamonds.

Dayton, J. A.↗

Electron density profiles in the background of LF absorption during Forbush-decrease and PSE

Based on the simulation of different Forbush decrease and particle precipitation effects in the D region, electron density profiles in the mid-latitudes the ionospheric absorption of low frequency (LF) radio waves was determined. The absorption variations at different frequenceis are strongly affected by the shape of the electron density profile. A structure appears which sometimes resembles the letter S (in a sloping form). Both the height (around 70 to 72 km) and the depth of the local minimum in the electron density contribute to the computed absorption changes of various degree at different frequencies. In this way several observed special absorption events can be interpreted.

Satori, G.↗

Design optimization for cost and quality: The robust design approach

Designing reliable, low cost, and operable space systems has become the key to future space operations. Designing high quality space systems at low cost is an economic and technological challenge to the designer. A systematic and efficient way to meet this challenge is a new method of design optimization for performance, quality, and cost, called Robust Design. Robust Design is an approach for design optimization. It consists of: making system performance insensitive to material and subsystem variation, thus allowing the use of less costly materials and components; making designs less sensitive to the variations in the operating environment, thus improving reliability and reducing operating costs; and using a new structured development process so that engineering time is used most productively. The objective in Robust Design is to select the best combination of controllable design parameters so that the system is most robust to uncontrollable noise factors. The robust design methodology uses a mathematical tool called an orthogonal array, from design of experiments theory, to study a large number of decision variables with a significantly small number of experiments. Robust design also uses a statistical measure of performance, called a signal-to-noise ratio, from electrical control theory, to evaluate the level of performance and the effect of noise factors. The purpose is to investigate the Robust Design methodology for improving quality and cost, demonstrate its application by the use of an example, and suggest its use as an integral part of space system design process.

Unal, Resit↗

Overview of NASA PTA propfan flight test program

The progress is covered of the NASA sponsored Propfan Test Assessment (PTA) flight test program. In PTA, a 9 ft. diameter propfan was installed on the left wing of a Gulfstream GII executive jet and is undergoing extensive flight testing to evaluate propfan structural integrity, near and far field noise, and cabin interior noise characteristics. This research testing includes variations in propeller tip speed and power loading, nacelle tilt angle, and aircraft Mach number and altitude. As a result, extensive parametric data will be obtained to verify and improve computer codes for predicting propfan aeroelastic, aerodynamic, and aeroacoustic characteristics. Over 600 measurements are being recorded for each of approx. 600 flight test conditions.

Graber, Edwin J.↗

Massive star evolution and SN 1987A

The evolution of massive stars through hydrogen and helium burning is addressed. A set of stellar evolutionary sequences for mass/solar mass of 15, 20, and 25, and metallicity of 0.002, 0.005, 0.007, 0.010, and 0.20 are presented; semiconvection is restricted to operating slower than the local thermal time scale. Using these sequences, simple models of the massive star content of the LMC are found to agree moderately well with the new observational data of Fitzpatrick and Garmany (1990). LMC supergiants were detected only in their postmain-sequence phases, so that 5-10 times more massive stars are there but not identified as such. It is argued that SN 1987A exhibits the normal evolution of a single star of about 20 solar mases having LMC abundances. Despite the variety of envelope behavior, the structure of the core at collapse is rather similar for the stars of a given mass. Variations due to different rates of mass loss are likely to be larger than those due to composition.

Arnett, David↗

Superconducting terahertz mixer using a transition-edge microbolometer

We present a new device concept for a mixer element for THz frequencies. This uses a superconducting transition-edge microbridge biased at the center of its superconducting transition near 4.2 K. It is fed from an antenna or waveguide structure. Power from a local oscillator and an RF signal produce a temperature and resulting resistance variation at the difference frequency. The new aspect is the use of a very short bridge in which rapid (less than 0.1 ns) outdiffusion of hot electrons occurs. This gives large intermediate frequency (IF) response. The mixer offers about 4 GHz IF bandwidth, about 80 ohm RF resistive impedance, good match to the IF amplifier, and requires only 1-20 nW of local oscillator power. The upper RF frequency is determined by antenna or waveguide properties. Predicted mixer conversion efficiency is 1/8, and predicted double-sideband receiver noise temperatures are 260 and 90 K for transition widths of 0.1 and 0.5 Tc, respectively.

Prober, D. E.↗

Plasma dynamics driven by finite-width current filament and KV potential drops in ionosphere-magnetosphere coupling

We have simulated the plasma dynamics of a quasi-two-dimensional current filament in ionosphere-magnetosphere coupling. The simulation consists of a set of one-dimensional flux tube simulations with different imposed time-dependent, field-aligned currents. The dynamical interactions of the individual current filaments with the ionospheric and magnetospheric plasma generate kV field-aligned potential drops along the field lines, and the side-by-side display exhibits the evolution of the implied potential structure in the horizontal direction. The primary cross-field motion produced by the horizontal E-field (ExB drift) is perpendicular to both of the significant spatial directions, and is thus ignorable in this geometry. The effects of other cross-field drict processes are discussed. The simulation thus provides insight into the dynamical evolution of 2D potential structures driven by an imposed finite-width field-aligned current profile. Spatial and temporal variation of other plasma parameters (temperatures, density, etc.) that are determined primarily by parallel transport effects are also displayed.

Ganguli, Supriya B.↗

ROSAT observations of VRO 42.05.01

We present the first X-ray images and spectra of the unusual supernova remnant VRO 42.05.01, based on a 22,680 s observation of the remnant with the ROSAT Position Sensitive Proportional Counter (PSPC). The overall shape of the X-ray remnant is similar to that of the radio remnant, but the X-ray morphology differs from the radio morphology in that the X-ray emission is not edge-brightened. The X-ray data are consistent with an isothermal remnant with variations in absorbing column density across the remnant that probably account for some of the observed structure. The remnant has an X-ray temperature of approximately 8.5 x 10(exp 6) K and an absorbing column of a few times 10(exp 21)/sq cm. This absorbing column is surprisingly small for the nominal distance of 5 kpc, and requires a low mean density along this line of sight.

Burrows, David N.↗

Double Diffusive Convection in Materials Processing

A great number of crystals grown in space are plagued by convective motions which contribute to structural flaws. The character of these instabilities is not well understood but is associated with density variations in the presence of residual gravity (g-jitter). As a specific example, past HgCdTe crystal growth space experiments by Lehoczky and co-workers indicate radial compositional asymmetry in the grown crystals. In the case of HgCdTe the rejected component into the melt upon solidification is HgTe which is denser than the melt. The space grown crystals indicate the presence of three dimensional flow with the heavier HgTe-rich material clearly aligned with the residual gravity (0.55-1.55 micro g) vector. This flow stems from double-diffusive convection, namely, thermal and solutal buoyancy driven flow in the melt. The study of double-diffusive convection is multi-faceted and rather vast. In our investigation, we seek to focus on one specific aspect of this discipline that is of direct relevance to materials processing especially crystal growth, namely, the side ways heating regime. This problem has been widely studied, both experimentally and numerically, in the context of solar ponds wherein the system is characterized by a linear salt (solutal) gradient with an imposed lateral temperature gradient. The induced flow instabilities arise from the wide disparity between the fluid thermal diffusivity and the solute diffusivity. The extension of the analysis to practical crystal growth applications has however not been rigorously made and understood. One subtle but important difference in crystal growth systems is the fact that die system solute gradient is non-linear (typically exponential). Besides, the crystal growth problem has the added complexities of solidification, both lateral and longitudinal thermal gradients and segregation phenomena in systems where binary and ternary compounds are being grown. This paper treats the side ways heating problem alone in a model fluid system. Results from detailed numerical calculations, mainly two dimensional are provided. The interactions between a non-linear solute gradient and an imposed transverse thermal gradient are investigated. The buoyancy effects are treated in the traditional Boussinesq approximation and also in a more complete density formulation to address recent concerns of the first approach especially in simulations of the system response in a reduced gravity environment. Detailed flow, temperature and solute field plots along with heat and mass transfer results are presented in the paper. Implications to practical crystal growth systems as discerned from the modeling results are also explored and reported.

Ramachandra, Narayanan↗

Fiber Optic Sensor Components and Systems for Smart Materials and Structures

The general objective of the funded research effort has been the development of discrete and distributed fiber sensors and fiber optic centered opto-electronic networks for the intelligent monitoring of phenomena in various aerospace structures related to NASA Marshall specific applications. In particular, we have proposed and have been developing technologies that we believe to be readily transferrable and which involve new fabrication techniques. The associated sensors developed can be incorporated into the matrix or on the surfaces of structures for the purpose of sensing stress, strain, temperature-both low and high, pressure field variations, phase changes, and the presence of various chemical constituents.

Lyons, R.↗