Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Source Physics Experiment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Long Lived Charge Separated States Induced by trans-Stilbene Incorporation in the Pores of Brønsted Acidic HZSM-5 Zeolites: Effect of Gallium on the Spontaneous Ionization Process

In situ CW-EPR, diffuse reflectance UV-visible spectroscopy and Raman scattering were used to monitor the spontaneous incorporation of trans-stilbene (t-St, C{sub 14}H{sub 12}) in the medium pore H{sub 2.2}-GaZSM-5 zeolites [H{sub 2.2}(GaO{sub 2}){sub 2.2}(SiO{sub 2}){sub 93.8}] by direct exposure under dry and inert atmosphere of solid t-St to dehydrated porous material without any solvent. The sorption of t-St with relatively low ionization potential (7.65 eV) occurs in Broensted acidic H{sub 2.2}-GaZSM-5 zeolites according to a complex and slow reaction sequence. First, charge separation occurs and t-St{sup {sm_bullet}+}{at}H{sub 2.2}-GaZSM-5{sup {sm_bullet}-} radical pair is created, while long-lived t-St{at}H{sub 2.2}GaZSM-5{sup {sm_bullet}-{sm_bullet}+} electron-hole pair is formed through hole transfer. The analysis of the DRUVv spectra set recorded during the t-St sorption course shows the respective concentrations of all transient species as a function of time. In particular, note that system reorganization is observed through a second type of electron-hole pair. The broad and strong bands observed in the near-IR regions over extended periods of time are tentatively assigned to the electron and/or hole spectral signatures in slightly different environments. Applying pulsed X-band EPR techniques, we were able to reveal the structural surrounding of the unpaired electrons of charge-separated states through the proper assignment of electron couplings with a large number of nuclei such as {sup 1}H, {sup 29}Si, {sup 69}Ga, and {sup 71}Ga using the two-dimensional hyperfine-sublevel correlation experiment (2D-HYSCORE). The distance measurements deduced from dipolar coupling experiments provide a unique picture of the long distance distribution of unpaired electrons generated by spontaneous ionization of t-St upon incorporation within H{sub 2.2}-GaZSM-5 zeolite. This result demonstrates that a large fraction of the unpaired electrons are ejected away from the initial site of ionization and that this compartmentalization plus the created electrostatic field hinder dramatically the propensity of charge recombination. The results for H-GaZSM-5 are compared to similar experiments conducted on H-AlZSM-5 zeolites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Versatile Ion Injector at KACST

A versatile ion-beam injector is presently being constructed at the National Centre for Mathematics and Physics (NCMP) at the King Abdul-Aziz City for Science and Technology (KACST), Saudi Arabia. This versatile injector will provide an electrostatic storage ring with high-quality ion beams of energies up to 30 keV per charge q. It will also allow for crossed-beams experiments in single-pass setups. The injector has been designed to include beams from two different ion sources, switched by a 90 deg. deflection setup, and to allow for matching of the beam parameters to the Twiss parameters of the ring. The injector is equipped with two crossed beam-lines (inlets), with duplicated beam extraction and acceleration systems. As part of the initial setup, a simple electric discharge ion source has been developed for commissioning of the whole injector. In this paper, we report on the ion optics layout and the design parameters of the injector.

43 PARTICLE ACCELERATORS↗

Global energy balance simulations of shattered pellet injection

The dynamics of shattered pellet injection (SPI) shutdowns are simulated using a time-dependent global energy balance model, based on a modification of the KPRAD framework. The new SPI particle source in the model calculates the ablation of individual pellet fragments that enter the plasma as a temporally resolved plume, thus capturing the effects of earlier fragments on the ablation of those that follow, which has a significant impact on the overall assimilation. Despite the reduced physics and the global averaging of all quantities, results from a large number of DIII-D, KSTAR, and JET experiments are well reproduced, including the plasma cooling timescales, particle assimilation, and current quench (CQ) rates. Cooling timescales and CQ rates are in good agreement for pellets containing as little as ∼1% neon, while particle assimilations are most accurate for neon fractions above ∼15% by number of atoms. Below this, the assimilation tends to be overestimated due to the lack of radial transport in the particle balance, which becomes important in the low-Z limit. Predictive simulations of mixed-composition dual-SPI shutdowns in ITER are compared against those with the 3D non-linear magnetohydrodynamic code JOREK and are found to reproduce overall trends observed in the higher-fidelity modeling across a range of injection scenarios. The general success of the model points to the critical role of energy balance in determining SPI particle assimilation and the subsequent disruption dynamics and highlights the value of these simulations for experimental interpretation and for optimizing the deployment of computationally expensive, higher-fidelity models.

energy balance model↗

A Python Instrument Control and Data Acquisition Suite for Reproducible Research

Tools that standardize and automate experimental data collection are needed for greater confidence in research results. The National Synchrotron Light Source-II (NSLS-II) has generated an open-source Python data acquisition, management, and analysis software suite that automates X-ray experiments and collects an experimental record that facilitates complete reproducibility. Here, we show that the NSLS-II tools are not only useful for X-ray science at large-scale facilities by presenting an add-on package that adapts these tools for use in a small laboratory with common physics and electrical engineering instruments. The composite software suite eases and automates the execution of experiments, records extensive metadata, stores data in portable containers, and speeds up the analysis through tools for comprehensive searches. In total, this software suite increases the reproducibility of laboratory experiments. We demonstrate the software via the evaluation of two lock-in amplifiers-the miniature ADA2200 and the ubiquitous Stanford Research Systems (SRS) SR810. The frequency resolution, signal-to-noise ratio, and dynamic reserve of the lock-in amplifiers are measured and presented. The usage of the software suite is described throughout these measurements so that the reader can implement the tools in their lab.

97 MATHEMATICS AND COMPUTING↗

The effects of incidence angle on film dosimetry and their consequences in IMRT dose verification

Purpose: The dosimetric accuracy of EDR2 radiographic film has been rigorously assessed in regular and intensity modulated beams for various incidence angles, including the parallel and perpendicular orientation. There clearly exists confusion in literature regarding the effect of film orientation. The primary aim is to clarify potential sources of the confusion and to gain physical insight into the film orientation effect with a link to radiochromic film as well. Methods: An inverse pyramid IMRT field, consisting of six regular and elongated 3 Multiplication-Sign 20 cm{sup 2} field segments, was studied in perpendicular and parallel orientation. Assessment of film self-perturbation and intrinsic directional sensitivity were also included in the experiments. Finally, the authors investigated the orientational effect in composite beams in the two extreme orientations, i.e., perpendicular and parallel. Results: The study of an inverse pyramid dose profile revealed good agreement between the perpendicular film and the diamond detector within 0.5% in the low-scatter regions for both 6 and 18 MV. The parallel oriented film demonstrated a 3% under-response at 5-cm (6 MV) depth against the perpendicular orientation, but both orientations over responded equally in the central region, which received only scattered dose, at both 5- and 20-cm depths. In a regular 6-MV 5 Multiplication-Sign 5 cm{sup 2} field, a 4.1% lower film response was observed in the parallel orientation compared to perpendicular orientation. The under response gradually increased to 6% when reducing the field size to 0.5 Multiplication-Sign 5 cm{sup 2}. On the other hand, the film showed a 1.7% lower response in parallel orientation for the large field size of 20 Multiplication-Sign 20 cm{sup 2} at 5-cm depth but the difference disappeared at 10 cm. At 18 MV, similar but somewhat lower differences were found between the two orientations. The directional sensitivity of the film diminishes with increasing field size and depth. Surprisingly a composite IMRT beam consisting of 20 adjacent strip segments also produced a significant orientational dependence of film response, notwithstanding the large total field size of 20 Multiplication-Sign 20 cm{sup 2}. Conclusions: This analysis allowed the development of a hypothesis about the physics behind the orientational dependence of film response in general and to formulate precautions when using film dosimetry in the dosimetric verification of multibeam treatments.

60 APPLIED LIFE SCIENCES↗

Polynomial Chaos Surrogate Construction for Random Fields with Parametric Uncertainty

Engineering and applied science rely on computational experiments to rigorously study physical systems. The mathematical models used to probe these systems are highly complex, and sampling-intensive studies often require prohibitively many simulations for acceptable accuracy. Surrogate models provide a means of circumventing the high computational expense of sampling such complex models. In particular, polynomial chaos expansions (PCEs) have been successfully used for uncertainty quantification studies of deterministic models where the dominant source of uncertainty is parametric. We discuss an extension to conventional PCE surrogate modeling to enable surrogate construction for stochastic computational models that have intrinsic noise in addition to parametric uncertainty. We develop a PCE surrogate on a joint space of intrinsic and parametric uncertainty, enabled by Rosenblatt transformations, which are evaluated via kernel density estimation of the associated conditional cumulative distributions. Furthermore, we extend the construction to random field data via the Karhunen–Loève expansion. We then take advantage of closed-form solutions for computing PCE Sobol indices to perform a global sensitivity analysis of the model which quantifies the intrinsic noise contribution to the overall model output variance. Additionally, the resulting joint PCE is generative in the sense that it allows generating random realizations at any input parameter setting that are statistically approximately equivalent to realizations from the underlying stochastic model. The method is demonstrated on a chemical catalysis example model and a synthetic example controlled by a parameter that enables a switch from unimodal to bimodal response distributions.

97 MATHEMATICS AND COMPUTING↗

Revealing Nanoscale Energy Flow Using Ultrafast THz to X-ray Beams (Final Technical Report)

We developed novel spectroscopic methods and made use of them to study energy flow and material properties on nanometer length scales and ultrafast time scales. Access to short length scales was provided through the use of light beams with short wavelengths (EUV through hard x-ray spectral ranges) and/or fabricated structural elements with nanometer dimensions. Recent advances in tabletop high harmonic generation of extreme ultraviolet (EUV) pulses were exploited to measure thermal transport and acoustic vibrations using time-resolved diffraction from photoexcited periodic nanostructures, revealing new physics that arises at length scales of tens to hundreds of nm. The tabletop EUV sources as well as the FERMI free electron laser at FERMI-Elettra in Trieste were used to generate as well as measure nanoscale thermoelastic responses without the need for patterned nanostructures, with the short length scale coming from optical interference patterns formed by crossing pairs of beams in transient grating experiments. We also used EUV and optical sources to excite and monitor ultrahigh-frequency acoustic waves (coherent phonons) at ultraflat interfaces and multilayer structures, extending our measurements of the highest-frequency coherent acoustic waves observed to date. Our measurements of acoustic properties allowed direct calculation of thermal conductivities which can be compared with our measurements of thermal transport and with first-principles calculations. Terahertz-frequency acoustic measurements can also be used to reveal complex relaxation dynamics in glass-forming liquids and partially disordered solids. Acoustic measurements were used to investigate the confinement effect in ultrathin liquid layers and to characterize mechanical properties of ultrathin solid layers. The methods we developed have broad fundamental applications and may also enable new practical metrology for use in nanoelectronics, just as earlier methods we developed have found commercial applications in microelectronics metrology.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A comparison of two types of velocity models for the lunar crust: Smooth continuous and stepwise layered

The data from the Apollo-14 and Apollo-16 Active Seismic Experiments were reanalyzed and show that a power-law velocity variation with depth is consistent with both the traveltimes and amplitudes of the first arrivals for source-to-geophone separations up to 32m. The data were improved by removing spurious glithches, flickering and stacking. While this improved the signal-to-noise ratios, it was not possible to measure the arrivals beyond 32m. The physical evidence that the shallow lunar regolith is made up of fine particles adds weight to the 1/6-power velocity model. The 1/6-power law predicts the traveltime t(x), varies with separation, x, as t(x) = t sub 0 (x/x sub 0) to the 5/6 power and, using a first-order theory, the amplitude, A(x), varies as A(x) = A sub 0 (x/x sub 0) to the (13-m)/12, M 1; the layer-velocity model predicts t(x) = t sub 0 (x/xsub 0) and A(x) = A sub 0 (x/x sub 0) to the 2nd power.

Gangi, A. F.↗

The Compressibility Burble

Simultaneous air-flow photographs and pressure-distribution measurements have been made of the NACA 4412 airfoil at high speeds in order to determine the physical nature of the compressibility burble. The flow photographs were obtained by the Schlieren method and the pressures were simultaneously measured for 54 stations on the 5-inch-chord wing by means of a multiple-tube photographic manometer. Pressure-measurement results and typical Schlieren photographs are presented. The general nature of the phenomenon called the "compressibility burble" is shown by these experiments. The source of the increased drag is the compression shock that occurs, the excess drag being due to the conversion of a considerable amount of the air-stream kinetic energy into heat at the compression shock.

Stack, John↗

Simulated Water Well Performance on Mars

Final document is attached. This paper describes improvements in our understanding of the nature and location of massive ice sheets on the surface of Mars as well as refinements made to a technical approach for extracting significant quantities of water from these ice sheets using a technique known as a Rodriguez Well. Recently published discoveries on Mars have reinforced the evidence for the existence and structure of these massive buried ice sheets. Using this improved understanding of the feedstock material, this paper describes estimates made regarding basic characteristics – mass, power, configuration, etc. – of a system that can access and extract water from these ice sheets. This paper then summarizes the basic operation of a Rodriguez Well and describes a computer simulation used to estimate the performance characteristics of this type of well. This simulation was built and used to predict the performance of similar wells operated in the Earth's Arctic and Antarctic regions. However, physical parameters (e.g., specific heat and gas constant for air, heat transfer between water and air and between ice and air, etc.) used in the simulation represent a terrestrial environment and must be adjusted for a Martian environment. A pair of experiments designed to determine the appropriate value for these parameters under Martian conditions are described. Until results from these experiments are available, published results from other sources are used in the simulation to gain an understanding of the effect that could be seen. These provisional results are discussed.

Hoffman, Stephen↗

Simulated Water Well Performance on Mars

This paper describes improvements in our understanding of the nature and location of massive ice sheets on the surface of Mars as well as refinements made to a technical approach for extracting significant quantities of water from these ice sheets using a technique known as a Rodriguez Well. Recently published discoveries on Mars have reinforced the evidence for the existence and structure of these massive buried ice sheets. Using this improved understanding of the feedstock material, this paper describes estimates made regarding basic characteristics - mass, power, configuration, etc. - of a system that can access and extract water from these ice sheets. This paper then summarizes the basic operation of a Rodriguez Well and describes a computer simulation used to estimate the performance characteristics of this type of well. This simulation was built and used to predict the performance of similar wells operated in the Earth's Arctic and Antarctic regions. However, physical parameters (e.g., specific heat and gas constant for air, heat transfer between water and air and between ice and air, etc.) used in the simulation represent a terrestrial environment and must be adjusted for a Martian environment. A pair of experiments designed to determine the appropriate values for these parameters under Martian conditions is described. Until results from these experiments are available, published results from other sources are used in the simulation to gain an understanding of the effect that could be seen. These provisional results are discussed.

Hoffman, Stephen J.↗

Evolutionary sequences of very hot, low-mass, accreting white dwarfs with application to symbiotic variables and ultrasoft/supersoft low-luminosity x-ray sources

We present the first detailed model results of quasi-static evolutionary sequences of very hot low-mass white dwarfs accreting hydrogen-rich material at rates between 1 x 10(exp -7) and 1 x 10(exp -9) solar mass/yr. Most of the sequences were generated from starting models whose core thermal structures were not thermally relaxed in the thermal pulse cycle-averaged sense of an asymptotic giant branch stellar core. Hence, the evolution at constant accretion rate was not invariably characterized by series of identical shell flashes. Sequences exhibiting stable steady state nuclear burning at the accretion supply rate as well as sequences exhibiting recurrent thermonuclear shell flashes are presented and discussed. In some cases, the white dwarf accretors remain small (less than 10(exp 11) cm) and very hot even during the shell flash episode. They then experience continued but reduced hydrogen shell burning during the longer quiescent intervals while their surface temperatures increase both because of compressional heating and envelope structure readjustment in response to accretion over thousands of years. Both accretion and continued hydrogen burning power these models with luminosities of a few times 10(exp 37) ergs/s. We suggest that the physical properties of these model sequences are of considerable relevance to the observed outburst and quiescent behavior of those symbiotic variables and symbiotic novae containing low-mass white dwarfs. We also suggest that our models are relevant to the observational characteristics of the growing class of low-luminosity, supersoft/ultrasoft X-ray sources in globular clusters, and the Magellanic Clouds.

Sion, Edward M.↗

SU-F-E-17: A Dedicated Teaching and Research Linac as a Stepping Stone to Introduce Medical Physics to Students

Purpose: This work describes how a non-clinical, research and teaching Linac is used as an extremely motivating and exciting way to introduce students to medical physics. Methods: The dedicated facility was inaugurated in 2014. The facility is composed of a fully equipped and functional state-of-the-art Varian TrueBeam Linac and a complete set of physics instruments and QA phantoms for the Linac and onboard imaging. The Linac bunker and treatment console are oversized such that a class of 12–15 can comfortably fit, seated if needed for longer sessions. A 3cr undergraduate laboratory course that includes medical imaging, x-ray source characterization (mAs, kVp, and filtering) and many others including an introductory Linac laboratory was created. The latter is composed of one general 4-hours session and a weekly 4-hours session for teams of two students. The general session includes a hands-on presentation of the Linac, its environment and a formal safety and radiation protection course (with an exam). Results: Since the winter of 2015, senior undergraduate (total of 15) pursuing either the medical physics or the biomedical engineering tracks can register. At the Linac, the students are allowed full control of the experiments, including set-up and irradiation. Supervisor intervention is limited to safety concerns for students or equipment. Measurements of output factors using two chambers (regular and small field) for various field sizes (1×1 to 30×30 cm{sup 2}) and of detailed depth-dose curves for 6 MV, 6 and 12 MeV beams are to be performed and discussed in a formal report. Conclusion: Full access to, and control of, a Linac is the high point of this course. It provides a glimpse of medical physics and generates an experimental background for those continuing to CAMPEP programs. This dedicated, non-clinical facility further enable enhance CAMPEP graduate teaching and research activities not possible with a clinical device.

60 APPLIED LIFE SCIENCES↗

Counting statistics of collective photon transmissions

We theoretically study cooperative effects in the steady-state transmission of photons through a medium of N radiators. Using methods from quantum transport, we find a cross-over in scaling from N to N{sup 2} in the current and to even higher powers of N in the higher cumulants of the photon counting statistics as a function of the tunable source occupation. The effect should be observable for atoms confined within a nano-cell with a pumped optical cavity as photon source. - Highlights: > Super-radiance transfers to super-transmittance in steady-state transport. > Higher cumulants are much more sensitive indicators for collective behavior than the first cumulant. > Effects should be measurable by pumped-cavity experiment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Layer-by-layer modification of aliphatic polyamide anion-exchange membranes to increase Cl - /SO 4 2- selectivity

Development of anion-exchange membranes (AEMs) with selectivities among anions may expand the applications of these membranes in salt separations. This work shows that layer-by-layer coating of aliphatic polyamide AEMs with poly(4-styrenesulfonate) (PSS)/protonated poly(allylamine) (PAH) films enhances Cl - /SO 4 2- dialysis selectivities, and the extent of this enhancement depends on the source-phase salt concentrations. For a source phase containing 0.01 M NaCl and 0.01 M Na 2 SO 4 and a receiving phase of 0.01 M Na 2 CO 3 , a (PSS/PAH) 5 PSS coating (5 PSS/PAH “bilayers” capped with a layer of PSS) increases the Cl - /SO 4 2- selectivity from 1.7 to 5.3 in diffusion dialysis and from 1.3 to 7.4 in electrodialysis. Remarkably, the diffusion dialysis selectivity of a coated membrane increases to 140 when the salt concentrations in the source phase are 0.1 M. Even with bare membranes, selectivity increases to 13 with 0.1 M source-phase salt concentrations. Moreover, AEMs coated only on the receiving side show much higher selectivities but lower fluxes than those coated only on the source side. In conclusion, partitioning experiments and modelling suggest that the increased Cl - /SO 4 2- selectivities at high source-phase salt concentrations stem from enhanced Cl - partitioning and electromigration that disproportionately decreases SO 4 2- flux in the AEM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental Investigation on Effect of Smoke Management System in a High-large Atrium

In an atrium measured 120 m by 180 m by 36.5 m high, fire tests were conducted under 'natural filling' and 'mechanical exhaust' conditions by hot smoke test method. The fire size was 8 MW released by an ethanol pool of 3.6 m in diameter. The distribution of vertical temperature profiles above the fire source and the gas layer temperatures were measured. From these measurements, it was shown that the fans successfully exhausted hot smoke to control descending of hot smoke layer and temperature rising rate. The hot smoke layer can be maintained at about 30 m which was almost 2 times of hot layer height in 'natural filling' condition. The temperature risings in both conditions were too low to cause thermal damage to the structure, only 18.6 K and 12 K. The centerline temperature above the fire source and the height of hot smoke layer were calculated using the plume models. The calculated results agreed well with the conclusions obtained from the experiment results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strange particle production at low and intermediate energies

The weak kaon production off the nucleon induced by neutrinos and antineutrinos is studied at low and intermediate energies of interest for some ongoing and future neutrino oscillation experiments. We develop a microscopical model based on the SU(3) chiral Lagrangians. The studied mechanisms are the main source of kaon production for neutrino energies up to 2 GeV for the various channels and the cross sections are large enough to be amenable to be measured by experiments such as Minerva, T2K and NOvA.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Focusing and directional beaming effects of airborne sound through a planar lens with zigzag slits

Based on the Huygens-Fresnel principle, we design a planar lens to efficiently realize the interconversion between the point-like sound source and Gaussian beam in ambient air. The lens is constructed by a planar plate perforated elaborately with a nonuniform array of zigzag slits, where the slit exits act as subwavelength-sized secondary sources carrying desired sound responses. The experiments operated at audible regime agree well with the theoretical predictions. This compact device could be useful in daily life applications, such as for medical and detection purposes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗