Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shorting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Short-Range Disorder in TeO 2 Melt and Glass

High-resolution X-ray pair distribution functions for molten and glassy TeO 2 reveal coordination numbers n TeO ≈ 4. However, distinct from the known α-, β-, and γ-TeO 2 polymorphs, there is considerable short-range disorder such that no clear cutoff distance between bonded and nonbonded interactions exists. We suggest that this is similar to disorder in δ-TeO 2 and arises from a broad distribution of asymmetric Te–O–Te bridges, something that we observe becomes increasingly asymmetric with increasing liquid temperature. Such behavior is qualitatively consistent with existing interpretations of Raman scattering spectra, and equivalent to temperature-induced coordination number reduction, for sufficiently large cutoff radii. Therefore, TeO 2 contains a distribution of local environments that are, furthermore, temperature dependent, making it distinct from the canonical single-oxide glass formers. Furthermore, our results are in good agreement with high-level ab initio cluster calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Short- and Long-Range Attractive Forces That Influence the Structure of Montmorillonite Osmotic Hydrates

Clay swelling is a colloidal phenomenon that has a large influence on flow and solute migration in soils and sediments. While models for clay swelling have been proposed over many years, debate remains as to the interaction forces that combine to produce the observed swelling behavior. Using cryogenic transmission electron microscopy (cryo-TEM) and small-angle X-ray scattering, we study the influence of salinity, in combination with layer charge, interlayer cation, and particle size, on montmorillonite swelling. We observe a decrease in swelling with increased layer charge, increased cation charge, and decreased cation hydration, each indicative of the critical influence of Coulombic attraction between the negatively charged layers and interlayer cations. Cryo-TEM images of individual montmorillonite particles also reveal that swelling is dependent upon the number of layers in a particle. Calculations of the van der Waals (vdW) interaction based on new measurements of Hamaker coefficients confirm that long-range vdW interactions extend beyond near-neighbor layer interactions and result in a decrease in layer spacing with a larger number of layers. This work clarifies the short- and long-range attractive interactions that govern clay structure and ultimately the stability and permeability of hydrated clays in the environment.

58 GEOSCIENCES↗

Pressure-Tolerant 3D Anodes Enable Short-Circuit Prevention and Low Heat Generation in Argyrodite Solid-State Batteries

Solid-state batteries (SSBs) offer a safer, higher-energy-density alternative to lithium-ion batteries, yet commercialization is hindered by incompatibility with lithium metal. Here, to overcome these challenges, we developed a cost-effective, commercially available prelithiated micro carbon fiber framework (Li-Cf) anode featuring a high-pressure-tolerance, for use with argyrodite solid-state electrolytes (SSEs). This 3D structure accommodates uniform lithium deposition, simplifies cell assembly under elevated pressure, inhibits dendrite growth toward SSEs, reduces heat generation, and enhances overall compatibility. Notably, our architecture enables the cell to tolerate pressures up to 400 MPa without short-circuiting during assembly. Meanwhile, the 3D framework serves as a preferential pathway for lithium deposition, thereby reducing lithium growth toward the SSEs and mitigating the risk of dendrite formation in SSEs. Operando calorimetry and distribution of relaxation times analysis reveal that lithium morphology degradation at the interface with the SSEs is a key failure mechanism in lithium metal argyrodite SSBs, leading to increased diffusion resistance and heat generation. In contrast, the Li-Cf anode mitigates these issues by reducing both heat flux and charge transfer resistance. Full cells with LiNi 0.8 Co 0.1 Mn 0.1 O 2 /Li 6 PS 5 Cl/Li-Cf retain ~79% capacity after 600 cycles, demonstrating significantly improved cycling stability and strong potential for practical energy storage applications.

25 ENERGY STORAGE↗

Comprehensive in Vitro Analysis of Acyltransferase Domain Exchanges in Modular Polyketide Synthases and Its Application for Short-Chain Ketone Production

Type I modular polyketide synthases (PKSs) are polymerases that utilize acyl-CoAs as substrates. Each polyketide elongation reaction is catalyzed by a set of protein domains called a module. Each module usually contains an acyltransferase (AT) domain, which determines the specific acyl-CoA incorporated into each condensation reaction. Although a successful exchange of individual AT domains can lead to the biosynthesis of a large variety of novel compounds, hybrid PKS modules often show significantly decreased activities. Using monomodular PKSs as models, we have systematically analyzed in this paper the segments of AT domains and associated linkers in AT exchanges in vitro and have identified the boundaries within a module that can be used to exchange AT domains while maintaining protein stability and enzyme activity. Importantly, the optimized domain boundary is highly conserved, which facilitates AT domain replacements in most type I PKS modules. To further demonstrate the utility of the optimized AT domain boundary, we have constructed hybrid PKSs to produce industrially important short-chain ketones. Our in vitro and in vivo analysis demonstrated production of predicted ketones without significant loss of activities of the hybrid enzymes. Finally, these results greatly enhance the mechanistic understanding of PKS modules and prove the benefit of using engineered PKSs as a synthetic biology tool for chemical production.

59 BASIC BIOLOGICAL SCIENCES↗

Long- and Short-Range Constraints for the Structure Determination of Layered Silicates with Stacking Disorder

Layered silicates have important applications as host materials, supports for catalysis, and zeolite precursors. However, their local structures are often challenging to establish due to disorder of the sheet assemblies. We present a new protocol that combines long- and short-range structural constraints from diffraction and solid-state NMR techniques, respectively, to determine the molecular structure of layered silicates in the presence of various extents of stacking disorder. Solid-state 29Si NMR data are largely insensitive to the incomplete extent of three-dimensional (3D) crystallinity that limits the interpretation of diffraction data alone to the identification of possible unit cells and space groups. State-of-the-art NMR crystallography techniques consequently provide a simplified view of materials from which candidate framework structures can be built and evaluated based on local structural constraints, including interatomic distances, Si site numbers and multiplicities, and Si–O–Si connectivities, and refined using density functional theory. This protocol was applied to a new layered silicate material named CLS-1, of composition [Si5O11H][C9N2H15]·1.9(H2O), synthesized by using a fluoride-based protocol and cationic alkylaminopyridinium as a structure-directing agent (SDA). Despite the intrinsic complexity and partial ordering of the intersheet arrangements and organic–inorganic interactions, this led to the identification of a single space group that is compatible with both NMR and diffraction data, from which the silicate framework structure could be established,. The remarkable similarities between the layered framework structures of CLS-1, HUS-2 (Tsunoji et al. J. Mater. Chem.2012, 22, 13682), and another layered silicate material with a radically different morphology and extent of stacking order and interlayer dynamics, established by using a similar approach (Brouwer et al. J. Am. Chem. Soc.2013, 135, 5641), point to the remarkable robustness of this previously unknown silicate framework type.

Cadars, Sylvian↗

Efficient Multistate Reactive Molecular Dynamics Approach Based on Short-Range Effective Potentials

Nonbonded interactions between molecules usually include the van der Waals forceand computationally expensive long-range electrostatic interactions. This article develops a moreefficient approach: the effective-interaction multistate empirical-valence-bond (EI-MS-EVB) model.The EI-MS-EVB method relies on a mapping of all interactions onto a short-range and thus,computationally efficient effective potential. The effective potential is tabulated by matching itsforce to known trajectories obtained from the full-potential empirical multistate empirical-valence-bond (MS-EVB) model. The effective pairwise interaction depends on and is uniquely determinedby the atomic configuration of the system, varying only with respect to the hydrogen-bondingtopology. By comparing the EI-MS-EVB and full MS-EVB calculations of several equilibriumand dynamic properties important to hydrated excess proton solvation and transport, we showthat the EI-MS-EVB model produces very accurate results for the specific system in which thetabulated potentials were generated. The EI-MS-EVB potential also transfers reasonably wellto similar systems with different temperatures and box sizes. The EI-MS-EVB method alsoreduces the computational cost of the nonbonded interactions by about 1 order of magnitude incomparison with the full algorithm.

Chen, Hanning↗

Short run effects of a price on carbon dioxide emissions from U.S. electric generators

The price of delivered electricity will rise if generators have to pay for carbon dioxide emissions through an implicit or explicit mechanism. There are two main effects that a substantial price on CO{sub 2} emissions would have in the short run (before the generation fleet changes significantly). First, consumers would react to increased price by buying less, described by their price elasticity of demand. Second, a price on CO{sub 2} emissions would change the order in which existing generators are economically dispatched, depending on their carbon dioxide emissions and marginal fuel prices. Both the price increase and dispatch changes depend on the mix of generation technologies and fuels in the region available for dispatch, although the consumer response to higher prices is the dominant effect. We estimate that the instantaneous imposition of a price of $35 per metric ton on CO{sub 2} emissions would lead to a 10% reduction in CO{sub 2} emissions in PJM and MISO at a price elasticity of -0.1. Reductions in ERCOT would be about one-third as large. Thus, a price on CO{sub 2} emissions that has been shown in earlier work to stimulate investment in new generation technology also provides significant CO{sub 2} reductions before new technology is deployed at large scale. 39 refs., 4 figs., 2 tabs.

20 FOSSIL-FUELED POWER PLANTS↗

Mixed-Valent Dicobalt and Iron-Cobalt Complexes with High-Spin Configurations and Short Metal-Metal Bonds

Cobalt–cobalt and iron–cobalt bonds are investigated in coordination complexes with formally mixed-valent [M 2 ] 3+ cores. The trigonal dicobalt tris(diphenylformamidinate) compound, Co 2 (DPhF) 3 , which was previously reported by Cotton, Murillo, and co-workers (Inorg. Chim. Acta 1996, 249, 9), is shown to have an energetically isolated, high-spin sextet ground-state by magnetic susceptibility and electron paramagnetic resonance (EPR) spectroscopy. A new tris(amidinato)amine ligand platform is introduced. By tethering three amidinate donors to an apical amine, this platform offers two distinct metal-binding sites. Using the phenyl-substituted variant (abbreviated as L Ph ), the isolation of a dicobalt homobimetallic and an iron–cobalt heterobimetallic are demonstrated. The new [Co 2 ] 3+ and [FeCo] 3+ cores have high-spin sextet and septet ground states, respectively. Their solid-state structures reveal short metal–metal bond distances of 2.29 Å for Co–Co and 2.18 Å for Fe–Co; the latter is the shortest distance for an iron–cobalt bond to date. To assign the positions of iron and cobalt atoms as well as to determine if Fe/Co mixing is occurring, X-ray anomalous scattering experiments were performed, spanning the Fe and Co absorption energies. These studies show only a minor amount of metal-site mixing in this complex, and that FeCoL Ph is more precisely described as (Fe 0.94(1) Co 0.06(1) )(Co 0.95(1) Fe 0.05(1) )L Ph . The iron–cobalt heterobimetallic has been further characterized by Mössbauer spectroscopy. Its isomer shift of 0.65 mm/s and quadrupole splitting of 0.64 mm/s are comparable to the related diiron complex, Fe 2 (DPhF) 3 . On the basis of spectroscopic data and theoretical calculations, it is proposed that the formal [M 2 ] 3+ cores are fully delocalized.

Zall, Christopher M.↗

Energy conversion with solid oxide fuel cell systems: A review of concepts amd outlooks for the short- and long-term

A review of energy conversion systems which use solid oxide fuel cells (SOFCs) as their primary electricity generation component is presented. The systems reviewed are largely geared for development and use in the short- and long-term future. These include systems for bulk power generation, distributed power generation, and systems integrated with other forms of energy conversion such as fuel production. The potential incorporation of CO{sub 2} capture and sequestration technologies and the influences of potential government policies are also discussed.

30 DIRECT ENERGY CONVERSION↗

Short-Wave Infrared Upconverting Nanoparticles

Optical technologies enable real-time, noninvasive analysis of complex systems but are limited to discrete regions of the optical spectrum. While wavelengths in the short-wave infrared (SWIR) window (typically, 1700-3000 nm) should enable deep subsurface penetration and reduced photodamage, there are few luminescent probes that can be excited in this region. Here, we report the discovery of lanthanide-based upconverting nanoparticles (UCNPs) that efficiently convert 1740 or 1950 nm excitation to wavelengths compatible with conventional silicon detectors. Screening of Ln3+ ion combinations by differential rate equation modeling identifies Ho3+/Tm3+ or Tm3+ dopants with strong visible or NIR-I emission following SWIR excitation. Experimental upconverted photoluminescence excitation (U-PLE) spectra find that 10% Tm3+-doped NaYF4 core/shell UCNPs have the strongest 800 nm emission from SWIR wavelengths, while UCNPs with an added 2% or 10% Ho3+ show the strongest red emission when excited at 1740 or 1950 nm. Mechanistic modeling shows that addition of a low percentage of Ho3+ to Tm3+-doped UCNPs shifts their emission from 800 to 652 nm by acting as a hub of efficient SWIR energy acceptance and redistribution up to visible emission manifolds. Parallel experimental and computational analysis shows rate equation models are able to predict compositions for specific wavelengths of both excitation and emission. These SWIR-responsive probes open a new IR bioimaging window, and are responsive at wavelengths important for vision technologies.

Qi, Xiao↗

Folding and Assembly of Short α, β, γ -Hybrid Peptides: Minor Variations in Sequence and Drastic Differences in Higher-Level Structures

Multilevel protein structures typically involve polypeptides of sufficient lengths. Here we report the folding and assembly of seven short tetrapeptides sharing the same types of α-, β-, and aromatic γ-amino acid residues. These are two sets of hybrid peptides, with three members in one set and four in the other, having complementary hydrogen-bonding sequences that were hypothesized to pair into linear H-bonded duplexes. However, instead of undergoing the anticipated pairing, the initially examined three oligomers, 1 and 2a or 2b, differing only in their central αβ hybrid dipeptide sequence, do not associate with each other and exhibit distinctly different folding behavior. Experiments based on NMR and mass spectrometry, along with computational studies and systematic inference, reveal that oligomer 1 folds into an expanded β-turn containing an unusual hybrid α/β-amino acid sequence composed of glycine and β-alanine, two α- and β-amino acid residues that are conformationally most flexible, and peptides 2a and 2b adopt a noncanonical, extended helical conformation and dimerize into double helices undergoing rapid conformational exchange or helix inversion. The different central dipeptide sequences, αβ vs βα, result in drastically different intramolecular H-bonding patterns that are responsible for the observed folding behavior of 1 and 2. The revealed turn and double helix have few natural or synthetic counterparts, and provide novel and unique folding prototypes based on which chiral α- and β-amino acids are incorporated. The resultant derivatives 1a, 1b, 2c, and 2d follow the same folding and assembling behavior and demonstrate the generality of this system with the formation of expanded β-turns and double helices with enhanced folding stabilities, hampered helix inversion, as well as defined and dominant helical sense. This work has demonstrated the unique capability of synthetic foldamers in generating structures with fascinating folding and assembling behavior. As a result, the revealed systems offer ample opportunity for further structural optimization and applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced electron transport in dye-sensitized solar cells using short ZnO nanotips on a rough metal anode.

Many efforts have been directed toward the enhancement of electron transport in dye-sensitized solar cells (DSSC) using one-dimensional nanoarchitectured semiconductors. However, the improvement resulting from these ordered 1-D nanostructured electrodes is often offset or diminished by the deterioration in other device parameters intrinsically associated with the use of these 1-D nanostructures, such as the two-sided effect of the length of the nanowires impacting the series resistance and roughness factor. In this work, we mitigate this problem by allocating part of the roughness factor to the collecting anode instead of imparting all the roughness factors onto the semiconductor layer attached to the anode. A microscopically rough Zn microtip array is used as an electron-collecting anode on which ZnO nanotips are grown to serve as the semiconductor component of the DSSC. For the same surface roughness factor, our Zn-microtip|ZnO-nanotip DSSC exhibits an enhanced fill factor compared with DSSCs that have ZnO nanowires supported by a planar anode. In addition, the open-circuit voltage of the Zn-microtip|ZnO-nanotip DSSC is also improved due to a favorable band shift at the Zn-ZnO interface, which raises the Fermi level of the semiconductor and consequently enlarges the energy gap between the quasi-Fermi level of ZnO and the redox species. With these improvements, the overall efficiency becomes 1.4% with an open-circuit voltage of 770 mV, while the surface roughness factor of ZnO is approximately 60. Electrochemical impedance spectroscopic study reveals that the electron collection time is much shorter than the electron lifetime, suggesting that fast electron collection occurs in our device due to the significantly reduced electron collection distance along the short ZnO nanotips. The overall improvement demonstrates a new approach to enhance the efficiency of dye-sensitized solar cells.

14 SOLAR ENERGY↗

Raman Scattering at Plasmonic Junctions Shorted by Conductive Molecular Bridges

Intensity spikes in Raman scattering, accompanied by switching between line spectra and band spectra, can be assigned to shorting the junction plasmon through molecular conductive bridges. This is demonstrated through Raman trajectories recorded at a plasmonic junction formed by a gold AFM tip in contact with a silver surface coated either with biphenyl-4,4’-dithiol or biphenyl-4-thiol. The fluctuations are absent in the monothiol. In effect, the making and breaking of chemical bonds is tracked.

Conductivity limit↗

Polymorphism in Self-Assembly of Short Peptoid Sequences

Due to various applications enabled by diverse morphologies of self-assembled sequence-defined polymers, controlling the self-assembly of synthetic peptidomimetics into designed morphologies has emerged as a promising route for the development of bioinspired functional materials. Herein, we report morphological control over the assembly of a series of short peptoids, or poly-N-substituted glycines, that contain asymmetric hydrophobic domains. We demonstrate that the inherent flexibility of amphiphilic peptoid bilayers drives assembly polymorphism, resulting in the coexistence of nanosheets, twisted ribbons, and nanofibers three distinct morphologies. By tuning peptoid molecular interactions through variations in sequence design, solution pH, and temperature, we demonstrate precise control over the twisting and folding of peptoid bilayers, enabling the formation of well-defined nanosheets and nanohelices. Molecular dynamics simulations further unravel how the introduction of asymmetric hydrophobic domains enables the flexibility of peptoid bilayers and results in peptoid assembly polymorphism. By tuning peptoid molecular interactions through heating, we further demonstrate the transformation of nanosheets into nanohelices. We envision that our mechanistic investigation of peptoid assembly polymorphism provides a strong foundation for leveraging peptoid sequences and chemistries to achieve controlled molecular interactions, driving the creation of biomimetic materials with tailored morphologies and functionalities.

assembly polymorphism↗

Enhancing Streamflow Forecast and Extracting Insights Using Long-Short Term Memory Networks With Data Integration at Continental Scales

Recent observations with varied schedules and types (moving average, snapshot, or regularly spaced) can help to improve streamflow forecasts, but it is challenging to integrate them effectively. Based on a long short-term memory (LSTM) streamflow model, we tested multiple versions of a flexible procedure we call data integration (DI) to leverage recent discharge measurements to improve forecasts. DI accepts lagged inputs either directly or through a convolutional neural network unit. DI ubiquitously elevated streamflow forecast performance to unseen levels, reaching a record continental-scale median Nash-Sutcliffe Efficiency coefficient value of 0.86. Integrating moving-average discharge, discharge from the last few days, or even average discharge from the previous calendar month could all improve daily forecasts. Directly using lagged observations as inputs was comparable in performance to using the convolutional neural network unit. Importantly, we obtained valuable insights regarding hydrologic processes impacting LSTM and DI performance. Before applying DI, the base LSTM model worked well in mountainous or snow-dominated regions, but less well in regions with low discharge volumes (due to either low precipitation or high precipitation-energy synchronicity) and large interannual storage variability. DI was most beneficial in regions with high flow autocorrelation: it greatly reduced baseflow bias in groundwater-dominated western basins and also improved peak prediction for basins with dynamical surface water storage, such as the Prairie Potholes or Great Lakes regions. However, even DI cannot elevate performance in high-aridity basins with 1-day flash peaks. Despite this limitation, there is much promise for a deep-learning-based forecast paradigm due to its performance, automation, efficiency, and flexibility.

54 ENVIRONMENTAL SCIENCES↗

Novel Deep Learning Transformer Model for Short to Sub‐Seasonal Streamflow Forecast

Accurate short-to-subseasonal streamflow forecasts are becoming crucial for effective water management in an increasingly variable climate. However, streamflow forecast remains challenging over extended lead times, uncertainty in meteorological inputs, and increased frequency and variability in extreme weather and climate events. We implemented a Future Time Series Transformer (FutureTST) model for streamflow forecasting that separately integrates past meteorological and streamflow data while incorporating future weather conditions. FutureTST achieves a mean Nash-Sutcliffe Efficiency (NSE) of 0.82 to 0.67 for 1- to 30-day streamflow forecasts. Incorporating upstream streamflow information improved forecast accuracy by up to 10%. During real-time forecast, FutureTST maintains higher forecast skills of 9.03 for 1-day and 5.74 for 14-day forecasts. In contrast, calibrated process-based hydrological model forecasts become unreliable beyond a 4-day lead time. Our findings demonstrate the potential of FutureTST as a reliable streamflow forecasting tool that offers a valuable addition to operational flood monitoring systems and climate-resilient decision-making.

Ambika, Anukesh Krishnankutty [Oak Ridge National ↗

Observational Evidence for Wind‐Driven Low‐Pass Filtering of Infrasound at Short Range

Infrasound from controlled explosions provides a unique opportunity to isolate atmospheric effects on propagation. We report observations from two campaigns in May and October 2024, each featuring 10‐ton TNT‐equivalent controlled surface chemical explosions recorded by a dense network of 31 single‐sensor stations within 23 km. Despite identical sources, the observed wavefields were very different. October signals followed a near‐unimodal period–distance trend, whereas May signals exhibited a pronounced azimuthal bifurcation in both period and celerity. Downwind paths largely preserved the short‐period baseline observed in October, while upwind paths showed systematically longer periods caused by wind‐driven low‐pass filtering. This study provides the first direct observational evidence that tropospheric winds can impose azimuth‐dependent low‐pass filtering at local ranges, without the influence of measured temperature inversions. Thus, the structure of the atmosphere can modify the spectral characteristics of low‐frequency acoustic waves even at a distance of only a few kilometers.

Geosciences↗

Continuous injection synthesis of indium arsenide quantum dots emissive in the short-wavelength infrared

With the emergence of applications based on short-wavelength infrared light, indium arsenide quantum dots are promising candidates to address existing shortcomings of other infrared-emissive nanomaterials. However, III–V quantum dots have historically struggled to match the high-quality optical properties of II–VI quantum dots. Here we present an extensive investigation of the kinetics that govern indium arsenide nanocrystal growth. Based on these insights, we design a synthesis of large indium arsenide quantum dots with narrow emission linewidths. We further synthesize indium arsenide-based core-shell-shell nanocrystals with quantum yields up to 82% and improved photo- and long-term storage stability. We then demonstrate non-invasive through-skull fluorescence imaging of the brain vasculature of murine models, and show that our probes exhibit 2–3 orders of magnitude higher quantum yields than commonly employed infrared emitters across the entire infrared camera sensitivity range. Finally, we anticipate that these probes will not only enable new biomedical imaging applications, but also improved infrared nanocrystal-LEDs and photon-upconversion technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗