Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Selection optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Quantifying Stove Emissions Related to Different Use Patterns for the Silver mini (Small Turkish) Space Heating Stove

Air pollution levels in Ulaanbaatar, Mongolia’s capital, are among the highest in the world. A primary source of this pollution is emissions from traditional coal - burning space heating stoves used in the Ger (tent) regions around Ulaanbaatar. Significant investment has been made to replace traditional heating stoves with improved low - emission high-efficiency stoves. Testing performed to support selection of replacement stoves or for optimizing performance may not be representative of true field performance of the improved stoves. Field observations and lab measurements indicate that performance is impacted , often adversely, by how stoves are actually being used in the field. The objective of this project is to identify factors that influence stove emissions under typical field operating conditions and to quantify the impact of these factors. A highly - instrumented stove testing facility was constructed to allow for rapid and precise adjustment of factors influencing stove performance. Tests were performed using one of the improved stove models currently available in Ulaanbaatar. Complete burn cycles were conducted with Nailakh coal from the Ulaanbaatar region using various startup parameters, refueling conditions , and fuel characteristics . Measurements were collected simultaneously from undiluted chimney gas, diluted gas drawn directly from the chimney and plume gas collected from a dilution tunnel above the chimney. CO, CO 2 , O 2 , temperature, pressure, and particulate matter (PM) were measured . We found that both refueling events and coal characteristics strongly influenced PM emissions and stove performance. Start-up and refueling events lead to increased PM emissions with more than 98% of PM mass emitted during the 20% of the burn where coal ignition occurs. CO emissions are distributed more evenly over the burn cycle, peaking both during ignition and late in the burn cycle . We anticipate these results being useful for quantifying public health outcomes related to the distribution of improved stoves and to identify opportunities for improving and sustaining performance of the new stoves .

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Tailoring Cementitious Materials Towards Value-Added Use of Large CO2 Volumes

The main thrust of the project is to develop scalable, economical and convenient methods of delivering carbon dioxide to concrete, and to tailor the chemistry of concrete to make beneficial use of large carbon dioxide volumes towards achieving enhanced performance, economic, sustainability and energy-efficiency attributes. Concrete materials incorporating two different inorganic binders based on calcium silicate hydrate (Portland cement) and alkali aluminosilicate hydrate (geopolymer) were considered in the project. The novel method of carbon dioxide delivery developed in the project involves mechanosorption into cementitious materials during their size reduction. The mechanosorbed carbon dioxide becomes available during production of concrete to induce carbonation reactions which enhance concrete properties and also sequester carbon dioxide. Experimental evidence was produced for mechanosorption (mechanochemical binding) of carbon dioxide into iron slag and Portland cement, the amorphous and reactive nature of the carbonates formed via mechanosorption, and their contributions towards enhancement of concrete material properties by inducing carbonation reactions. It was shown that mechanosorption of carbon dioxide can be accomplished by simple modification of the existing milling step in production of cementitious materials. An alternative carbon dioxide delivery method was also considered where curing of concrete products was performed in carbon dioxide. A host of additives were considered to enhance the sorption of carbon dioxide, dissolution of cementitious minerals in aqueous media, carbonation reactions, and co-precipitation of hydrates and carbonates for concrete production. Experimental investigations were conducted to identify the additives which offer the greatest promise for enhancing the carbon dioxide sequestration and the beneficial effects of carbonation reactions on concrete materials with different binder chemistries. The results confirmed that tailoring the chemistry of inorganic binders to suit carbon dioxide mechanosorption and carbonation reactions yields significant benefits. Optimization experimental investigations were undertaken with selected additives to further enhance the economics, environmental and performance benefits of the process. The optimum concrete materials incorporating chemically bound carbon dioxide were thoroughly characterized. The test results demonstrated the potential to raise the carbon dioxide sequestration of concrete, and to pronounce the consequent gains in the mechanical, barrier and durability characteristics of concrete. Analytical chemistry and theoretical methods were employed to provide insight into the mechanochemical binding of carbon dioxide, the mechanisms through which carbonation reactions enhance concrete properties, and the impacts of additives on the process. Initial and life-cycle environmental, economic and energy analyses were undertaken. The outcomes of these analyses demonstrated the value of the approach in sequestering significant quantities of carbon dioxide can to induce carbonation reactions which improve diverse material properties of concrete, and significantly lower the energy content and cost of concrete production. The project outcomes offer commercially viable means of transforming concrete, the most widely used material of construction, from a major source of carbon dioxide emission and energy consumption into a valuable resource for large-volume carbon dioxide sequestration. The technology promises to significantly enhance the structural efficiency, service life, sustainability, economics and energy-efficiency of the concrete-based infrastructure

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Novel Carbon (C)-Boron (B)-Nitrogen (N)-Containing H2 Storage Materials

The following summarizes the research conducted for DOE project DE-EE0005658 “Novel Carbon(C)-Boron(B)-Nitrogen(N)-Containing H2 Storage Materials”. This work focused in part on the continued study of two materials identified from the preceding project DE-FG360GO18143 (“Hydrogen Storage by Novel CBN Heterocycle Materials”) as lead candidates to meet the DOE technical targets for either vehicular or non-automotive hydrogen storage applications. Specifically, a room-temperature liquid, 3-methyl-1,2-cyclopentane (B), and a high H2 capacity solid, 1,2-BN-cyclohexane (J), were selected for further characterization and performance optimization. In addition to these compounds, the current project also aimed to prepare several new materials predicted to be disposed towards direct reversibility of H2 release and uptake, a feature deemed critical to achieving efficient recycling of spent fuel end products. To assist in the rational design of these and other next-generation materials, this project undertook to investigate the mechanism of hydrogen release from established compounds (mainly B and J) using a combined experimental/computational approach. Among this project’s signature accomplishments, the preliminary synthetic route to B was optimized for production on decagram scale. With such quantities of material available, its performance in powering an actual 30 W proton exchange membrane (PEM) fuel cell stack was tested and found to be identical to that of facility H2. Despite this positive proof-of-concept achievement, however, further consideration of neat B as a potential hydrogen storage material was abandoned due to evidence of thermal instability. Specifically, mass spectrometry-coupled thermogravimetric analysis (TGA-MS) revealed significant H2 release from B to initiate at 50 °C, well below the 60 °C minimum threshold set by the DOE. This result prompted a more extensive investigation in the decomposition mechanism of B vis-à-vis that of J, which exhibited in neat form a substantially higher onset temperature for spontaneous H2 release (70 °C). Solution-phase kinetic experiments using ReactIR established a second-order dependence for the initial loss of H2 from both B and J; Arrhenius analysis, however, revealed the activation barrier for this reaction was lower for B than for J, which presumably contributes to the diminished thermal stability of the former. On the basis of these and other experimental results, extensive computational efforts yielded a reasonable mechanistic model for the dehydrogenation of 1,2-BN-cycloalkane materials. While the prospect of neat B as a suitable hydrogen storage material was discarded, it was proposed that the combination of B with more thermally stable amine-borane-based materials might afford mixtures with improved properties. Indeed, when B was combined with ammonia borane (AB) in a 2:1 molar ratio, the two materials formed a liquid. More significantly, this mixture remained liquid even after complete dehydrogenation, thus establishing the potential for a single-phase fuel cycle. (In contrast, the dehydrogenation product of neat B is a low melting solid (mp = 28-30 °C).) Another advantage conferred by the blend formulation was a dramatic reduction in the amount of borazine produced by AB. Borazine is a well-known contaminant of H2 produced by the thermal decomposition of neat AB, and exerts deleterious effects on fuel cell performance. Residual gas analysis (RGA) of the gas stream generated from the B-AB blend, however, detected just 0.01% borazine content when a Pt-Ni nanoparticle dehydrogenation catalyst was used. In all ii then, the 2:1 B-AB blend marks a major achievement in the effort to develop a suitable liquid amine-borane hydrogen storage material, and merits further investigation into the optimization for practical adoption. Similar realization of the potential of J as a high % wt. H2 material required a method to dehydrogenate the carbonaceous components of the molecule without the use of a sacrificial hydrogen acceptor, as had been reported in the previous project. Ultimately, this reaction was achieved for a B,N-disubstituted BN-cyclohexene model substrate using a gas flow system with a fixed Pd/C catalyst bed. Considerable work remains, however, to translate these initial results into a general protocol for complete dehydrogenation of fully saturated BN-cycloalkane materials such as J. With concrete confirmation of the possibility to perform both BN and CC dehydrogenation on a single theoretical substrate, COMSOL modeling was used to evaluate the effects of thermodynamically coupling the two reactions. It was hypothesized that the heat generated from exothermic BN dehydrogenation would partially drive the endothermic CC dehydrogenation reaction; this additional heat consumption was expected to in turn confer the benefit of lowering the maximum reactor temperature. A two-dimensional model of an axisymmetric reactor including experimental kinetic and calculated thermodynamic parameters for both reactions did indeed predict these outcomes. The extent to which the effects of thermodynamic coupling actually manifested, however, were also revealed to depend strongly on the relative rates of the two reactions, as well as the magnitude of the equilibrium constant governing the progress of the endothermic process. Given the evident complexity of attaining high effective % wt. H2 capacity with J, alternative systems were investigated for greater facility of extensive H2 release. Among those studied, 1,2,4,5-bis-BN-cyclohexane (H) demonstrated the most favorable properties, particularly with respect to thermal stability: rather than decompose, a neat sample instead sublimed when heated above 150 °C. Nevertheless, two commercially available catalytic systems were identified to effect release of two H2 equivalents from H. Release of further equivalents were apparently impeded by the formation of either polymeric material or one of two dimeric cage compounds depending on the catalyst used. Notably, a method to regenerate H from these product mixtures remains to be developed. Thus, while H may prove useful for certain long-term energy storage needs, it is currently less suited applications involving frequent fuel consumption. Similar difficulties were also encountered in attempts to realize the complete fuel cycle of 1,3-BN-cyclohexane (E) and B,N-substituted derivatives thereof. It had been initially proposed that E would provide for readily reversible BN dehydrogenation through a measure of frustrated Lewis pair-type character. Indeed, computations predicted this reaction would be essentially thermoneutral in solution. In the course of attempts to fully hydrogenate the spent fuel, however, dimeric species formed and proved resistant to further BN reduction. While a number of monomeric cyclic compounds were also successfully synthesized as formal boron-nitrogen frustrated Lewis pairs, none demonstrated any capacity to split H2 across the BN unit. The challenge of developing a practical amine-borane-based material for readily reversible hydrogen storage thus remains unresolved at this time. As such, it deserves consideration as a major objective of any future work.

08 HYDROGEN↗

Overhead longwave infrared hyperspectral material identification using radiometric models

Material detection algorithms used in hyperspectral data processing are computationally efficient but can produce relatively high numbers of false positives. Material identification performed as a secondary processing step on detected pixels can help separate true and false positives. This paper presents a material identification processing chain for longwave infrared hyperspectral data of solid materials collected from airborne platforms. The algorithms utilize unwhitened radiance data and an iterative algorithm that determines the temperature, humidity, and ozone of the atmospheric profile. Pixel unmixing is done using constrained linear regression and Bayesian Information Criteria for model selection. The resulting product includes an optimal atmospheric profile and full radiance material model that includes material temperature, abundance values, and several fit statistics. A logistic regression method utilizing all model parameters to improve identification is also presented. This paper details the processing chain and provides justification for the algorithms used. Several examples are provided using modeled data at different noise levels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Origins of Matter on Near-Exascale Supercomputing

This LDRD addressed one of the central questions in physics today: the lack of antimatter relative to matter in the universe. If antimatter and matter existed in equal amounts they would have annihilated into radiation and we would not exist today. DOE is funding experiments to investigate processes that could lead to lepton number violation and the resulting neutrino-less double beta decay (0nbb) signal that may be observed (lepton number is a property of elementary particles similar to electric charge and lepton number violation would explain the matter-antimatter imbalance). However, even if the 0nbb decay is detected in these experiments, the physics mechanism that violates lepton number would not be known, as there are several candidates. Determining the appropriate mechanism from the experimental data requires theoretical calculations. Theoretical effort in the field has focused on long-range 0nbb decay mechanisms associated with the exchange of light neutrinos between two nucleons. An equally important set of mechanisms are associated with the exchange of heavy particles and short-range physics, including the exchange of massive Majorana neutrinos. Calculating the event rate for 0nbb decays for candidate theories involving heavy particle exchange requires large-scale Lattice simulations of the underlying fundamental theory of Quantum Chromodynamics (QCD). We have performed these simulations on the LLNL supercomputers and have calculated the necessary matrix elements of short-range operators that arise from the exchange of heavy mediators that contribute to 0nbb decay via the leading pion exchange diagrams. Our published results can now be used as input to effective field theory calculations to calculate the 0nbb decay rate for the nuclei involved in the various experimental detectors. In the process of this work we entered the 2018 Gordon Bell Prize competition (the highest prize in scientific supercomputing) with our innovative and highly optimized code and methods and were selected as one of the six international finalists. During this effort we helped with the bring-up of the new LLNL Sierra and Lassen supercomputers by identifying hardware and software problems. Aiming towards the next step of this research, involving the sub-leading nucleon-nucleon direct vertex, we have developed algorithms and codes that will play a significant role in future Lattice QCD calculations involving nucleon-nucleon interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Feature Based Qualification of 17-4PH Stainless Steel to Evaluate Location-Specific Variability in Wire Arc Additive Manufacturing

Qualifying large-scale metal additive manufacturing (M-AM) technologies such as wire arc additive manufacturing (WAAM) can be challenging. This is especially significant in precipitation hardened martensitic stainless steels like SS 17-4PH, where thermal histories induce location-specific microstructural variability and property anisotropy. The Department of Defense (DOD) and the United States Army Combat Capabilities Development Command Ground Vehicle Systems Center (GVSC) Ground Vehicle Materials Engineering (GVME) aim to build robust and qualified large-scale M-AM workflows that could reduce the time and cost through quick and informed evaluation, testing, and development of feedstock, processes, and parts. The report presents the findings from the collaborative efforts between Oak Ridge National Laboratory (ORNL) and the U.S. Army GVSC GVME. The aim of this project was to develop a geometric feature-based qualification framework for WAAM of SS 17-4PH components. This report outlines selection methodology of representative build geometries, optimization of WAAM process parameters, in-situ monitoring, microstructure-property evaluation, thermal simulations, as well as data visualization techniques incorporated in this project. The results from this project demonstrate a clear understanding of thermal history dependent phase evolution and consequent location-specific property variations in WAAM of SS 17-4PH. These results in conjunction with the data-driven methodologies used in this project are expected to reduce qualification timelines, improve predictability, and accelerate the development of reliable feature-based qualification strategies for part production via large-scale M-AM technologies.

36 MATERIALS SCIENCE↗

Agrivoltaics: Unlocking the Potential of Dual Land Use

This tutorial will delve into the practical and technical considerations for agrivoltaic systems, including crop selection, agricultural practices, and solar energy optimization. Leveraging insights from successful case studies, we'll address challenges such as policy barriers and regulatory gaps while exploring opportunities and incentives for implementation. With a focus on PV expertise, attendees will gain actionable knowledge on designing and evaluating dual-use systems that balance energy generation with agricultural productivity.

14 SOLAR ENERGY↗

Sensitivity of Riparian Buffer Designs to Climate Change—Nutrient and Sediment Loading to Streams: A Case Study in the Albemarle-Pamlico River Basins (USA) Using HAWQS

Riparian buffer zones (RBZs) provide multiple benefits to watershed ecosystems. We aimed to conduct an extensive sensitivity analysis of the RBZ designs to climate change nutrient and sediment loadings to streams. We designed 135 simulation scenarios starting with the six baselines RBZs (grass, urban, two-zone forest, three-zone forest, wildlife, and naturalized) in three 12-digit Hydrologic Unit Code watersheds within the Albemarle-Pamlico river basin (USA). Using the hydrologic and water quality system (HAWQS), we assessed the sensitivity of the designs to five water quality indicator (WQI) parameters: dissolved oxygen (DO), total phosphorous (TP), total nitrogen (TN), sediment (SD), and biochemical oxygen demand (BD). To understand the climate mitigation potential of RBZs, we identified a subset of future climate change projection models of air temperature and precipitation using EPA’s Locating and Selecting Scenarios Online tool. Analyses revealed optimal RBZ designs for the three watersheds. In terms of watershed ecosystem services sustainability, the optimal Urban RBZ in contemporary climate (1983–2018) reduced SD from 61–96%, TN from 34–55%, TP from 9–48%, and BD from 53–99%, and raised DO from 4–10% with respect to No-RBZ in the three watersheds. The late century’s (2070–2099) extreme mean annual climate changes significantly increased the projected SD and BD; however, the addition of urban RBZs was projected to offset the climate change reducing SD from 28–94% and BD from 69–93% in the watersheds. All other types of RBZs are also projected to fully mitigate the climate change impacts on WQI parameters except three-zone RBZ.

54 ENVIRONMENTAL SCIENCES↗

WHERE ARE THE LOW-MASS POPULATION III STARS?

We study the number and the distribution of low-mass Population III (Pop III) stars in the Milky Way. In our numerical model, hierarchical formation of dark matter minihalos and Milky-Way-sized halos are followed by a high-resolution cosmological simulation. We model the Pop III formation in H{sub 2} cooling minihalos without metal under UV radiation of the Lyman–Werner bands. Assuming a Kroupa initial mass function (IMF) from 0.15 to 1.0 M {sub ⊙} for low-mass Pop III stars, as a working hypothesis, we try to constrain the theoretical models in reverse by current and future observations. We find that the survivors tend to concentrate on the center of halo and subhalos. We also evaluate the observability of Pop III survivors in the Milky Way and dwarf galaxies, and constraints on the number of Pop III survivors per minihalo. The higher latitude fields require lower sample sizes because of the high number density of stars in the galactic disk, the required sample sizes are comparable in the high- and middle-latitude fields by photometrically selecting low-metallicity stars with optimized narrow-band filters, and the required number of dwarf galaxies to find one Pop III survivor is less than 10 at <100 kpc for the tip of red giant stars. Provided that available observations have not detected any survivors, the formation models of low-mass Pop III stars with more than 10 stars per minihalo are already excluded. Furthermore, we discuss the way to constrain the IMF of Pop III stars at a high mass range of ≳10 M {sub ⊙}.

79 ASTRONOMY AND ASTROPHYSICS↗

The 2.4 μ m Galaxy Luminosity Function as Measured Using WISE . II. Sample Selection

The WISE satellite surveyed the entire sky multiple times in four infrared (IR) wavelengths (3.4, 4.6, 12, and 22 $μ$m). This all-sky IR photometric survey makes it possible to leverage many of the large publicly available spectroscopic redshift surveys to measure galaxy properties in the IR. While characterizing the cross-matching of WISE data to a single survey is a straightforward process, doing it with six different redshift surveys takes a fair amount of space to characterize adequately, because each survey has unique caveats and characteristics that need addressing. This work describes a data set that results from matching five public redshift surveys with the AllWISE data release, along with a reanalysis of the data described in Lake et al. The combined data set has an additional flux limit of 80 $μ$Jy (19.14 AB mag) in WISE's W1 filter, imposed in order to limit it to targets with high completeness and reliable photometry in the AllWISE data set. Consistent analysis of all of the data is only possible if the color bias discussed in Ilbert et al. is addressed (e.g., the techniques explored in Lake et al.). Finally, the sample defined herein is used in a companion paper in this series to measure the luminosity function of galaxies at 2.4 μm rest-frame wavelength, and the selection process of the sample is optimized for this purpose.

79 ASTRONOMY AND ASTROPHYSICS↗

Spatially-Variant Tikhonov Regularization for Double-Difference Waveform Inversion

Double-difference waveform inversion is a potential tool for quantitative monitoring for geologic carbon storage. It jointly inverts time-lapse seismic data for changes in reservoir geophysical properties. Due to the ill-posedness of waveform inversion, it is a great challenge to obtain reservoir changes accurately and efficiently, particularly when using time-lapse seismic reflection data. Regularization techniques can be utilized to address the issue of ill-posedness. The regularization parameter controls the smoothness of inversion results. A constant regularization parameter is normally used in waveform inversion, and an optimal regularization parameter has to be selected. The resulting inversion results are a trade off among regions with different smoothness or noise levels; therefore the images are either over regularized in some regions while under regularized in the others. In this paper, we employ a spatially-variant parameter in the Tikhonov regularization scheme used in double-difference waveform tomography to improve the inversion accuracy and robustness. We compare the results obtained using a spatially-variant parameter with those obtained using a constant regularization parameter and those produced without any regularization. We observe that, utilizing a spatially-variant regularization scheme, the target regions are well reconstructed while the noise is reduced in the other regions. We show that the spatially-variant regularization scheme provides the flexibility to regularize local regions based on the a priori information without increasing computational costs and the computer memory requirement.

ACCURACY↗

A Diagnoser Algorithm for Anomaly Detection in DEDS under Partial Unreliable Observations: Characterization and Inclusion in Sensor Configuration Optimizaton

Complex engineering systems have to be carefully monitored to meet demanding performance requirements, including detecting anomalies in their operations. There are two major monitoring challenges for these systems. The first challenge is that information collected from the monitored system is often partial and/or unreliable, in the sense that some occurred events may not be reported and/or may be reported incorrectly (e.g., reported as another event). The second is that anomalies often consist of sequences of event patterns separated in space and time. This paper introduces and analyzes a diagnoser algorithm that meets these challenges for detecting and counting occurrences of anomalies in engineering systems. The proposed diagnoser algorithm assumes that models are available for characterizing plant operations (via stochastic automata) and sensors (via probabilistic mappings) used for reporting partial and unreliable information. Methods for analyzing the effects of model uncertainties on the diagnoser performance are also discussed. In order to select configurations that reduce sensor costs, while satisfying diagnoser performance requirements, a sensor configuration selection algorithm developed in previous work is then extended for the proposed diagnoser algorithm. The proposed algorithms and methods are then applied to a multi-unit-operation system, which is derived from an actual facility application. Results show that the proposed diagnoser algorithm is able to detect and count occurrences of anomalies accurately and that its performance is robust to model uncertainties. Furthermore, the sensor configuration selection algorithm is able to suggest optimal sensor configurations with significantly reduced costs, while still yielding acceptable performance for counting the occurrences of anomalies.

97 MATHEMATICS AND COMPUTING↗

Probabilistic Forecast of All-Sky Solar Radiation Using Enhanced WRF-Solar: Preprint

This study presents enhancements of the Weather Research and Forecasting model with solar extensions (WRF-Solar) to provide probabilistic forecasts of solar radiation. Our approach builds ensemble WRF-Solar runs by introducing stochastic perturbations of variables that produce the largest uncertainties in predicting surface irradiance and clouds. The key variables are identified using tangent linear sensitivity analysis of six physics packages responsible for all-sky irradiance variability. An optimal strategy to stochastically perturb the selected variables is developed and applied to WRF-Solar to generate ensemble members for day-ahead solar prediction. The National Solar Radiation Database (NSRDB) is used to validate the ensemble forecast at arbitrary locations on the model grid. Preliminary results indicate that the proposed technique can potentially produce WRF-Solar ensembles providing reliable information of solar prediction uncertainty. This study describes the implemented methodology and initial results as well as future research to improve ensemble-based probabilistic forecasts with WRF-Solar.

all-sky↗

Alpha-Imaging Detector System Development for Large Area Monitoring

Effective management and disposal of legacy nuclear waste are essential for ensuring safe work environments and minimizing environmental impacts. Monitoring airborne actinide contamination is particularly critical due to the high internal dose potential of alpha-emitting radionuclides. Traditional continuous air monitoring systems (CAMs) used in the industry are limited in the volume of air they can sample, potentially leading to inaccurate radiation detection over large areas. For example, in 2018, elevated levels of airborne Plutonium-239 were detected beyond the controlled areas of the Hanford Plutonium Finishing Plant, highlighting the potential risks to both plant workers and nearby residents. To address these challenges, high-efficiency particulate absorbing (HEPA) air purifiers can enhance air flow by up to 1.5 orders of magnitude, thereby increasing monitoring efficiency and providing a cost-effective solution for large-area surveillance. To quantify the activities of alpha-emitting radionuclides on HEPA filters, the Savannah River National Laboratory is developing an advanced alpha-imaging detection system. This system includes scintillating materials combined with a digital scientific camera. A significant concern in operating such a large-area airborne monitoring system is the handling of HEPA filters, which may be contaminated with radioactive particles. To mitigate these hazards, it is crucial to ensure that any contamination is securely fixed onto the filters. Efforts have been made to optimize the sensitivity of scintillator-epoxy composites and apply them to HEPA filters. These materials were characterized using fluoroscence spectroscopy. These techniques confirmed the purity of the raw materials, the dispersion of scintillators in the epoxy matrix, and the stability of their optical and structural properties post-modification. The optimal scintillator-epoxy composite was selected for use on alpha-spiked HEPA filters to evaluate the efficiency of the sprayer. HEPA filters, embedded with alpha particles collected by an air purifier deployed in an airborne radiation area, have been tested to assess detection efficiency. Future work will focus on employing multiple imaging sensors simultaneously to enhance sensitivity across different regions of the HEPA filter.

Pham, Phuong [Savannah River National Laboratory (↗

Exact Fock-State Preparation with $n^{1/4}$ Circuit Depth

Efficient, deterministic, and high-fidelity preparation of large Fock states is essential for scaling bosonic quantum technologies and exploring quantum phenomena at large excitation energies. We introduce a deterministic one-parameter (D1p) protocol that maps Fock-state preparation in an infinite-dimensional Hilbert space onto two-dimensional amplitude amplification. Starting from a coherent state with $|α|\simeq\sqrt{n}$, the initial target-state population scales as $n^{-1/2}$, yielding an iteration count and circuit depth of $\mathcal{O}(n^{1/4})$. Phase matching guarantees unit fidelity in the ideal model; remarkably, preparing $|{10^6}\rangle$ requires only 39 iterations. The protocol uses only displacements and number-selective phase operations, requires no numerical optimization, and further extends to state transfer, general superpositions, finite-dimensional systems, and multipartite entangled states. In the large-amplitude regime, its multi-target form prepares $L$-legged cat states with an iteration count determined only by $L$; cats with up to ten legs require only two iterations, independent of the coherent-state amplitude. This framework provides a broadly applicable route to highly excited bosonic states on platforms supporting these elementary controls.

Roy, Tanay [Fermilab] (ORCID:000000019442862X)↗

Method for exploiting bias in factor analysis using constrained alternating least squares algorithms

Bias plays an important role in factor analysis and is often implicitly made use of, for example, to constrain solutions to factors that conform to physical reality. However, when components are collinear, a large range of solutions may exist that satisfy the basic constraints and fit the data equally well. In such cases, the introduction of mathematical bias through the application of constraints may select solutions that are less than optimal. The biased alternating least squares algorithm of the present invention can offset mathematical bias introduced by constraints in the standard alternating least squares analysis to achieve factor solutions that are most consistent with physical reality. In addition, these methods can be used to explicitly exploit bias to provide alternative views and provide additional insights into spectral data sets.

Keenan, Michael R↗

FORCE Update 2024

The Framework for Optimization of Resources and Economics (FORCE) tool suite is the U.S. Department of Energy’s Nuclear Integrated Energy Systems (IES) Program flagship tool suite for technoeconomic IES analysis of IES. This tool suite is useful for analysis designed to evaluate and improve the technoeconomics of energy production systems, particularly for systems including nuclear technology. In this report, we document the development activity for the FORCE tool suite to extend its capabilities as performed during fiscal year 2024. In addition to reliability and accessibility, capability is one of the three standards guiding the development of the FORCE tool suite and the software codes that are its constituent parts. Extending the capabilities of the FORCE tool suite allows analysis both within the IES program as well as industry, university, and laboratory partners to perform analysis with more accuracy, insight, and impactful narrative. Four areas of capability development were the focus of activity this year: economic parameter uncertainty quantification, multiresolution analysis, components-to-optimization workflow automation, and statespace construction workflows for real-time optimal control. In economic parameter uncertainty quantification, the ability of HERON to capture risk due to scenarios (weather and energy demand uncertainty) was expanded to also include uncertainties in financial parameters such as capital cost or operation and maintenance costs. By including these sources of uncertainty, which are sometimes very large compared with scenario uncertainty, HERON is better able to capture the risk posed by investment in various IES technology. Because of this, analysts can also consider the reduction in risks that can be realized by choice of some technologies. In multiresolution analysis, development activity extended on work completed previously. In fiscal year 2023, methods for decomposing time series signals, such as demand, solar and wind availability, and price profiles, were analyzed and down-selected to those most effective at splitting signals into different resolutions. These resolutions allow considering the influence of different energy demand and supply behaviors across different time scales. For example, energy demand might be divided into seasonal, weekly, and hourly profiles. In fiscal year 2024, this preliminary work was extended and implemented within the Risk Analysis Virtual Environment (RAVEN) risk and uncertainty analysis platform, which is used throughout the FORCE framework. This development of the “multi-resolution time series analysis” (MR-TSA) module in RAVEN allows training synthetic history generators on complex time series. These synthetic history generators can then be used in HERON for generating scenarios that represent possible market and weather scenarios that can be analyzed on different time scales. We envision completing this work in the future, implementing multiresolution dispatch optimization strategies that can make the most beneficial use of these stratified time histories. In components-to-optimization workflow development, workflows for translating user inputs of components into algorithms for algebraic optimization were selected and implemented. Similar algorithms within the Holistic Energy Resource Optimization Network (HERON) were separated from the main code base of HERON and gathered with the components-to-optimization workflows in the new Dispatch Optimization Variable Engine (DOVE) software library. This modularization allows FORCE users to analyze dispatch optimization and energy system duty cycles independently of HERON, which previously was a burdensome task. Additionally, these dispatch optimization algorithms, set up in an independent library, can now be used across all software applications within FORCE, especially including the real-time optimal control software Optimization of Real-time Capacity Allocation (ORCA). Allowing FORCE software to share dispatch optimization algorithms within a single library allows for improved software maintenance and reliability. In statespace characterization workflow development, alternative workflows for optimizing dispatch with additional technical accuracy was the focus, particularly to improve the real-time optimization decision making in ORCA. Using algorithms and workflows initially developed for the Feasible Actuator Range Modifier (FARM), workflows for determining the statespace representation of IES were identified and demonstrated. The resulting dispatch optimization required a more robust optimization algorithm than that originally used in HERON (and moved to DOVE), which required adding an alternate workflow to DOVE that can more accurately match the behavior of physical systems using a partial differential equation representation. In conclusion, capability developments in the FORCE tool suite in fiscal year 2024 have improved the ability of the FORCE tool suite to perform

29 ENERGY PLANNING, POLICY, AND ECONOMY↗