Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Scanning Electron Microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Physical Property of Magnesium Doped Barium Hexaferrite Particles By Citrate Precursor Route In Presence Of Surfactants

M-type Barium Magnesium hexaferrite with the composition BaMg{sub 2}Fe{sub 10}O{sub 19} was successfully prepared with and without surfactant by using a citrate precursor route. The obtained precursors were calcined at various temperatures. The crystalline structure, phase analysis and particle size were investigated by using X-ray diffraction (XRD), Fourier Transform infrared spectroscopy (FTIR), Scanning Electron Microscopy (SEM) techniques. It is observed that the surfactant addition controls the microstructure of the formed Barium Magnesium hexaferrite particles and the type of surfactant plays a crucial role in deciding the morphology of particles.

36 MATERIALS SCIENCE↗

Surface and crystalline analysis of aluminum oxide single crystal treated by quasistationary compression plasma flow

Highlights: Black-Right-Pointing-Pointer The effects of treatment of Al{sub 2}O{sub 3} (0001) surface by CPF are analyzed. Black-Right-Pointing-Pointer Oriented low-dimensional structures are occurred for the treated Al{sub 2}O{sub 3} crystal. Black-Right-Pointing-Pointer The dimension of these ripples are 1 {mu}m and the distance between them is about 10 {mu}m. Black-Right-Pointing-Pointer The ripple-shaped structures contain a higher percentage of oxygen than the surroundings. Black-Right-Pointing-Pointer Results could promote CPF as a tool for producing organized oxygen-rich structures. -- Abstract: Material such as aluminum oxide (Al{sub 2}O{sub 3}) is important in electronics industry. On the other hand, plasma is one of the most efficient and sophisticated tools for materials processing. In this work a treatment of Al{sub 2}O{sub 3} (0001) surface by quasistationary compression plasma flow (CPF) is analyzed in detail. Offline metrology was performed using dielectric measurements, X-ray diffraction (XRD), scanning electron microscopy (SEM) equipped with energy-dispersive X-ray spectroscopy (EDX) and atomic force microscopy (AFM). Oriented low-dimensional periodic structures are occurred for the plasma treated Al{sub 2}O{sub 3} single crystal. In the paper is reported that these oriented ripple-shaped structures contain a higher percentage of oxygen than the surrounding crystal surface. This could be the framework for usage of CPF as a tool in manufacturing of surfaces containing the highly organized oxygen-rich structures.

36 MATERIALS SCIENCE↗

Characterizing the stretch-flangeability of hot rolled multiphase steels

Hole expansion tests are commonly used to characterize the edge stretching limit of a material. Traditionally, a conical punch is used to expand a punched hole until a through-thickness crack appears. However, many automotive stretch flanging operations involve in-plane edge stretching that is best captured with a flat punch. In this paper, hole expansion tests were carried out on two different hot-rolled multiphase steels using both flat and conical punches. The fracture mechanisms for both punch types were investigated using scanning electron microscopy (SEM)

36 MATERIALS SCIENCE↗

Plasma Nitriding of AISI 304 Stainless Steel in Cathodic and Floating Electric Potential: Influence on Morphology, Chemical Characteristics and Tribological Behavior

In direct current plasma nitriding (DCPN), the treated components are subjected to a high cathodic potential, which brings several inherent shortcomings, e.g., damage by arcing and the edging effect. In active screen plasma nitriding (ASPN) processes, the cathodic potential is applied to a metal screen that surrounds the workload, and the component to be treated is placed in a floating potential. Such an electrical configuration allows plasma to be formed on the metal screen surface rather than on the component surface; thus, the shortcomings of the DCPN are eliminated. In this work, the nitrided experiments were performed using a plasma nitriding unit. Two groups of samples were placed on the table in the cathodic and the floating potential, corresponding to the DCPN and ASPN, respectively. The floating samples and table were surrounded by a steel screen. The DCPN and ASPN of the AISI 304 stainless steels are investigated as a function of the electric potential. The samples were characterized using scanning electron microscopy with energy-dispersive x-ray spectroscopy, x-ray diffraction, atomic force microscopy and transmission electron microscope. Dry sliding ball-on-disk wear tests were conducted on the untreated substrate, DCPN and ASPN samples. The results reveal that all nitrided samples successfully produced similar nitrogen-supersaturated S phase layers on their surfaces. This finding also shows the strong impact of the electric potential of the nitriding process on the morphology, chemical characteristics, hardness and tribological behavior of the DCPN and ASPN samples.

36 MATERIALS SCIENCE↗

Synthesis and properties of poly(methyl methacrylate-2-acrylamido-2-methylpropane sulfonic acid)/PbS hybrid composite

The synthesis of a new hybrid composite based on PbS nanoparticles and poly(methyl methacrylate-2-acrylamido-2-methylpropane sulfonic acid) [P(MMA-AMPSA)] copolymer is reported. The chemical synthesis consists in two steps: (i) a surfactant-free emulsion copolymerization between methyl methacrylate and 2-acrylamido-2-methylpropane sulfonic acid and (ii) the generation of PbS particles in the presence of the P(MMA-AMPSA) latex, from the reaction between lead nitrate and thiourea. The composite was studied by scanning electron microscopy (SEM), X-ray diffraction, FTIR spectroscopy, thermogravimetric analysis and differential scanning calorimetry. The microstructure observed using SEM proves that the PbS nanoparticles are well dispersed in the copolymer matrix. The X-ray diffraction measurements demonstrate that the PbS nanoparticles have a cubic rock salt structure. It was also found that the inorganic semiconductor nanoparticles improve the thermal stability of the copolymer matrix.

2-METHYLPROPANE↗

Femtosecond laser crystallization of amorphous Ge

Ultrafast crystallization of amorphous germanium (a-Ge) in ambient has been studied. Plasma enhanced chemical vapor deposition grown a-Ge was irradiated with single femtosecond laser pulses of various durations with a range of fluences from below melting to above ablation threshold. Extensive use of Raman scattering has been employed to determine post solidification features aided by scanning electron microscopy and atomic force microscopy measurements. Linewidth of the Ge optic phonon at 300 cm{sup -1} as a function of laser fluence provides a signature for the crystallization of a-Ge. Various crystallization regimes including nanostructures in the form of nanospheres have been identified.

36 MATERIALS SCIENCE↗

Morphology dependent electrochemical performance of sputter deposited Sn thin films

Graphical abstract: Smooth homogenous anode surface results in better electrochemical performance in terms of capacity and cycle life. Highlights: ► Controlling rate of deposition of Sn thin films for different surface morphology. ► Higher deposition rate results in poor capacity retention. ► Lower deposition rate of 0.25 nm s{sup −1} helps in higher capacity retention. ► Electrochemical performance correlated homogeneity and interparticle contact area. -- Abstract: This study deals with tailoring of the surface morphology, microstructure, and electrochemical properties of Sn thin films deposited by magnetron sputtering with different deposition rates. Scanning electron microscopy and atomic force microscopy are used to characterize the film surface morphology. Electrochemical properties of Sn thin film are measured and compared by cyclic voltammetry and charge–discharge cycle data at a constant current density. Sn thin film fabricated with a higher deposition rate exhibited an initial discharge capacity of 798 mAh g{sup −1} but reduced to 94 mAh g{sup −1} at 30th cycle. Film deposited with lower deposition rate delivered 770 mAh g{sup −1} during 1st cycle with improved capacity retention of 521 mAh g{sup −1} on 30th cycle. Comparison of electrochemical performances of these films has revealed important distinctions, which are associated with the surface morphology and hence on rate of deposition.

36 MATERIALS SCIENCE↗

Characterization of microscale wear in a ploysilicon-based MEMS device using AFM and PEEM-NEXAFS spectromicroscopy.

Mechanisms of microscale wear in silicon-based microelectromechanical systems (MEMS) are elucidated by studying a polysilicon nanotractor, a device specifically designed to conduct friction and wear tests under controlled conditions. Photoelectron emission microscopy (PEEM) was combined with near-edge X-ray absorption fine structure (NEXAFS) spectroscopy and atomic force microscopy (AFM) to quantitatively probe chemical changes and structural modification, respectively, in the wear track of the nanotractor. The ability of PEEM-NEXAFS to spatially map chemical variations in the near-surface region of samples at high lateral spatial resolution is unparalleled and therefore ideally suited for this study. The results show that it is possible to detect microscopic chemical changes using PEEM-NEXAFS, specifically, oxidation at the sliding interface of a MEMS device. We observe that wear induces oxidation of the polysilicon at the immediate contact interface, and the spectra are consistent with those from amorphous SiO{sub 2}. The oxidation is correlated with gouging and debris build-up in the wear track, as measured by AFM and scanning electron microscopy (SEM).

36 MATERIALS SCIENCE↗

Electrochemical Li insertion studies on WNb{sub 12}O{sub 33}-A shear ReO{sub 3} type structure

Electrochemical lithium insertion studies on WNb{sub 12}O{sub 33} synthesized by solid state reaction (SSR) are carried out in the voltage range 1.0-3.2 V. During first discharge 15.6 Li are inserted with a specific capacity of 221 mAh/g. WNb{sub 12}O{sub 33} is also synthesized by sol-gel (SG) technique with a view to enhance the rate capability and cycling properties. The SSR and SG samples are characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and galvanostatic cycling. Electrochemical cycling performance of SG samples is superior to that of the SSR sample at high 'C' rates. The sample synthesized by SG method exhibits high specific capacity of 142 mAh/g after 20 cycles at 20C rate. - Graphical abstract: The projected structure can be described as 3x4xinfinity ReO{sub 3} type blocks of NbO{sub 6} octahedra sharing corners, joined with identical blocks via tetrahedrally coordinated tungsten atoms.

36 MATERIALS SCIENCE↗

Diagnosis of PV Cell Passivation Degradation Resulting from Hot-Humid, High Voltage Potential Aging

Corrosion of the antireflective coating on the cell ("AR c corrosion") was previously observed in studies using hot-humid test conditions with external high voltage (HV) bias. Because AR c corrosion is not well understood, mini-modules (MiMos) were examined in a comparative experiment using PERC and PERT as well as legacy Al-BSF cells. For separate MiMos with the cell circuit electrical at +1500 V, -1500 V, or unbiased "V oc", test conditions in the comparative study included 60degrees C/60% RH for 96 h, as in IEC TS 62804-1; 70degrees C/70%RH for 200 h; and 85degrees C/85% RH for 200 h. Characterizations at each read point included: camera and electroluminescence (EL) imaging, colorimetry, and I-V curve tracing. Characterizations at the final read point included: SunsVoc; spatially mapping external quantum efficiency (EQE); high resolution: photoluminescence (PL), EL, and dark lock-in thermographic (DLIT) imaging. Forensics were performed on extracted cores, including scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS) and scanning Auger microscopy (SAM). Forensics were also conducted on MiMos (stepped HV aging) and full-sized modules (outdoor aging) from previous studies. AR c corrosion was specifically observed for the glass/encapsulant/cell side of +1500 V (HV+) stressed MiMos, where appearance, color, and reflectance were the characteristics most distinguished relative to simultaneously occurring degradation modes. SEM/EDS and SAM identified conversion of silicon nitride to silicon oxide or hydrous silica, preferentially occurring at the edges and tips of the pyramidal textured cell surface.

aging↗

Microscopic Characterization of Carbonaceous Aerosol Particle Aging in the Outflow from Mexico City

This study was part of the Megacities Initiative: Local and Global Research Observations (MILAGRO) field campaign conducted in Mexico City Metropolitan Area during spring 2006. The physical and chemical transformations of particles aged in the outflow from Mexico City were investigated for the transport event of 22 March 2006. A detailed chemical analysis of individual particles was performed using a combination of complementary microscopy and micro-spectroscopy techniques. The applied techniques included scanning transmission X-ray microscopy (STXM) coupled with near edge X-ray absorption fine structure spectroscopy (NEXAFS) and computer controlled scanning electron microscopy with an energy dispersive X-ray analyzer (CCSEM/EDX). As the aerosol plume evolves from the city center, the organic mass per particle increases and the fraction of carbon-carbon double bonds (associated with elemental carbon) decreases. Organic functional groups enhanced with particle age include: carboxylic acids, alkyl groups, and oxygen bonded alkyl groups. At the city center (T0) the most prevalent aerosol type contained inorganic species (composed of sulfur, nitrogen, oxygen, and potassium) coated with organic material. At the T1 and T2 sites, located northeast of T0 (~;;29 km and ~;;65 km, respectively), the fraction of homogenously mixed organic particles increased in both size and number. These observations illustrate the evolution of the physical mixing state and organic bonding in individual particles in a photochemically active environment.

54 ENVIRONMENTAL SCIENCES↗

Use of nanoindentation technique for a better understanding of the fracture toughness of Strombus gigas conch shell

In this work the nanochemical properties of the composite organomineral biomaterial constituting Strombus gigas conch shell are studied by means of dynamic mechanical analyses associated to nanoidentation technique. The measurements are performed on shell samples presenting different surface orientations relative to the growth axis of the conch shell. The influence of the organic component of the biomaterial on its nanomechanical properties is also investigated by studying fresh and dried S. gigas conch shells. Monocrystalline aragonite is used as a reference. For the understanding of nanochemical behaviour, special attention is paid to the pop in events observed on the load/displacement curves which results from nanofractures' initiation and propagation occuring during the load process. In order to better understand the mechanical properties systematic studies of the structure and morphology are performed using scanning electron microscopy, atomic force microscopy and X-ray diffractometry. The hardness and Young's modulus values measured on bio aragonite samples are close to those of the aragonite mineral standard. This surprising result shows that, H and E values are not related to the bio composition and lamellar structure of the bio aragonite. However, it was found that the organic layer and the micro architecture strongly influence the nanofracture initiation and propagation processes in the samples. Statistic study of the pop-in events can help to predict the macroscopic mechanical behaviour of the material. - Highlights: ► Nanomechanical properties of Strombus gigas conch shell ► Low influence of the crossed lamellar structure on H and E values at the nano scale ► Strong influence of the crossed lamellar on nanocracks initiation ► Correlation between mechanical behaviors at the macro and nano scales.

36 MATERIALS SCIENCE↗

Microscopic Characterization of Carbonaceous Aerosol Particle Aging in the Outflow from Mexico City

The physical and chemical transformations of particles aged in the outflow from Mexico City were investigated for the transport event of 22 March 2006. This study was part of the Megacities Initiative: Local and Global Research Observations (MILAGRO) 2006 field campaign. A detailed chemical analysis of individual particles was performed using a combination of complementary spectro-microscopic techniques. These techniques included scanning transmission X-ray microscopy (STXM) coupled with near edge X-ray absorption fine structure spectroscopy (NEXAFS) and computer controlled scanning electron microscopy with an energy dispersive X-ray analyzer (CCSEM/EDX). As the aerosol plume evolves from the city center, the organic mass per particle increases and the fraction of carbon-carbon double bonds (associated with elemental carbon) decreases. Organic functional groups enhanced with age include: carboxylic acids, alkyl groups, and oxygen bonded alkyl groups. At the city center (T0) the most prevalent aerosol type contained inorganic species (composed of sulfur, nitrogen, oxygen, and potassium) coated with organic material. At the T1 and T2 sites, located northeast of T0 (~29 km and ~65 km, respectively), the fraction of homogenously mixed organic particles increased in both size and number. These observations illustrate the evolution of the physical mixing state and organic bonding in individual particles in a photochemically active environment.

54 ENVIRONMENTAL SCIENCES↗

Formation and atomic force spectroscopy of AlGaN/GaN nanoheterostructures

A procedure of production of Group-III nitride layers with a reduced number of defects is developed. The procedure is based on molecular-beam epitaxy with simultaneous monitoring of the surface by scanning electron microscopy. It is established that the layer structural quality assessed from the number of surface defects directly corresponds to the characteristics of the two-dimensional electron gas in the resulting heterostructures. The effect of doping of the AlGaN barrier layer with donor impurities on the characteristics of the two-dimensional electron gas is considered.

36 MATERIALS SCIENCE↗

Desorption of Ag from Grain Boundaries in Ag Film on Br and H-Passivated Si(111) Surfaces

Growth of Ag film on Br- and H-passivated Si(111) surfaces was examined by Rutherford backscattering spectrometry (RBS), scanning electron microscopy (SEM) and photoemission electron microscopy (PEEM) techniques. The phenomenon of thermal grooving was observed after annealing at higher temperatures. Hierarchical desorption of Ag from the grain boundaries produce a fractal structure of Ag-depleted regions. Hierarchical desorption may be used for nanopatterning of the layer.

36 MATERIALS SCIENCE↗

Ultrasound-assisted facile synthesis of a new tantalum(V) metal-organic framework nanostructure: Design, characterization, systematic study, and CO{sub 2} adsorption performance

This work presents a fast route for the preparation of a new Ta(V) metal-organic framework nanostructure with high surface area, significant porosity, and small size distribution. X-ray diffraction (XRD), scanning electron microscopy (SEM), Transition electron microscopy (TEM), energy dispersive spectrometer (EDS), thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC), fourier transform infrared spectroscopy (FTIR), CHNS/O elemental analyser, and Brunauer-Emmett-Teller (BET) surface area analysis were applied to characterize the synthesized product. Moreover, the influences of ultrasonic irradiation including temperature, time, and power on different features of the final products were systematically studied using 2{sup k-1} factorial design experiments, and the response surface optimization was used for determining the best welding parameter combination. The results obtained from analyses of variances showed that ultrasonic parameters affected the size distribution, thermal behaviour, and surface area of Ta-MOF samples. Based on response surface methodology, Ta-MOF could be obtained with mean diameter of 55 nm, thermal stability of 228 °C, and high surface area of 2100 m{sup 2}/g. The results revealed that the synthesized products could be utilized in various applications such as a novel candidate for CO{sub 2} adsorption. - Graphical abstract: A facile route was used for fabrication of a new metal -organic framework based on tantalum nanostructures that have high surface area, considerable porosity, homogenous morphology, and small size distribution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analytical (S)TEM Studies of Defects Associated with PID in Stressed Si PV Modules

We report the results of analytical transmission electron microscopy studies of defects associated with potentialinduced degradation (PID) of a laboratory stressed multicrystalline silicon mini-module. Shunt defects were first identified using dark lock in thermography (DLIT) and scanning electron microscopy (SEM) electron beam induced current (EBIC) imaging. Transmission electron microscopy (TEM) crosssection samples were then prepared of selected shunt defects using conventional focused ion beam (FIB) lift out techniques and examined by TEM and scanning transmission electron microscopy (STEM). The defects were identified as {111} planar defects and compositional mapping of the defects revealed elevated levels of both Na, expected from previous work, and also surprisingly O at some of the defect cores.

14 SOLAR ENERGY↗

Synthesis of atomically thin hexagonal boron nitride films on nickel foils by molecular beam epitaxy

Hexagonal boron nitride (h-BN) is a layered two-dimensional material with properties that make it promising as a dielectric in various applications. We report the growth of h-BN films on Ni foils from elemental B and N using molecular beam epitaxy. The presence of crystalline h-BN over the entire substrate is confirmed by Raman spectroscopy. Atomic force microscopy is used to examine the morphology and continuity of the synthesized films. A scanning electron microscopy study of films obtained using shorter depositions offers insight into the nucleation and growth behavior of h-BN on the Ni substrate. The morphology of h-BN was found to evolve from dendritic, star-shaped islands to larger, smooth triangular ones with increasing growth temperature.

36 MATERIALS SCIENCE↗