Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHAPE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Shape sensitivity analysis of flutter response of a laminated wing

A method is presented for calculating the shape sensitivity of a wing aeroelastic response with respect to changes in geometric shape. Yates' modified strip method is used in conjunction with Giles' equivalent plate analysis to predict the flutter speed, frequency, and reduced frequency of the wing. Three methods are used to calculate the sensitivity of the eigenvalue. The first method is purely a finite difference calculation of the eigenvalue derivative directly from the solution of the flutter problem corresponding to the two different values of the shape parameters. The second method uses an analytic expression for the eigenvalue sensitivities of a general complex matrix, where the derivatives of the aerodynamic, mass, and stiffness matrices are computed using a finite difference approximation. The third method also uses an analytic expression for the eigenvalue sensitivities, but the aerodynamic matrix is computed analytically. All three methods are found to be in good agreement with each other. The sensitivities of the eigenvalues were used to predict the flutter speed, frequency, and reduced frequency. These approximations were found to be in good agreement with those obtained using a complete reanalysis.

Bergen, Fred D.↗

A hybrid asymptotic-modal analysis of the EM scattering by an open-ended S-shaped rectangular waveguide cavity

The electromagnetic fields (EM) backscatter from a 3-dimensional perfectly conducting S-shaped open-ended cavity with a planar interior termination is analyzed when it is illuminated by an external plane wave. The analysis is based on a self-consistent multiple scattering method which accounts for the multiple wave interactions between the open end and the interior termination. The scattering matrices which described the reflection and transmission coefficients of the waveguide modes reflected and transmitted at each junction between the different waveguide sections, as well at the scattering from the edges at the open end are found via asymptotic high frequency methods such as the geometrical and physical theories of diffraction used in conjunction with the equivalent current method. The numerical results for an S-shaped inlet cavity are compared with the backscatter from a straight inlet cavity; the backscattered patterns are different because the curvature of an S-shaped inlet cavity redistributes the energy reflected from the interior termination in a way that is different from a straight inlet cavity.

Law, P. H.↗

A survey of visual preprocessing and shape representation techniques

Many recent theories and methods proposed for visual preprocessing and shape representation are summarized. The survey brings together research from the fields of biology, psychology, computer science, electrical engineering, and most recently, neural networks. It was motivated by the need to preprocess images for a sparse distributed memory (SDM), but the techniques presented may also prove useful for applying other associative memories to visual pattern recognition. The material of this survey is divided into three sections: an overview of biological visual processing; methods of preprocessing (extracting parts of shape, texture, motion, and depth); and shape representation and recognition (form invariance, primitives and structural descriptions, and theories of attention).

Olshausen, Bruno A.↗

On the computation of shock shapes in nonequilibrium hypersonic flows

Several models using different descriptions of high temperature air are used to compute the bow shock shapes on experimental model configurations. The test conditions result in nonequilibrium chemical reaction and thermal excitation of the gas which has a first-order effect on the shock shapes. The computed results are compared to experiment and demonstrate that the model using seven chemical species and six temperatures predicts the experimental shock shapes very well. The other gas models, including perfect gas, equilibrium gas and one-temperature chemical nonequilibrium models are less accurate. The results illustrate the necessity of including both thermal and chemical nonequilibrium in the description of the gas. The use of these experimental data makes it possible to verify aspects of current and future chemically reacting flow algorithms.

Candler, Graham↗

On ice shape prediction methodologies and comparison with experimental data

Comparisons are made between the analysis of Wilder (1969), Bragg (1982), and the ice shape predictions of LEWICE given a specific airfoil geometry and set of meteorological conditions. Also, comparisons are made between the actual ice shapes as found in flight tests of the NASA Lewic RC Twin Otter and that predicted by the approximate methods noted earlier and LEWICE. Further, an investigation of two important parameters in the analysis of LEWICE has been made. Time stepping and initial surface roughness has been varied to identify any trends in the results. Guidelines have been identified for the correlation of these two parameters with the results in terms of atmospheric conditions. The range of meteorological conditions chosen, such as droplet diameter, free air temperature, and liquid water content has allowed rime, mixed, and glaze ice shapes at the leading edge of an airfoil to be investigated.

Korkan, K. D.↗

Shape sensitivity analysis of flutter response of a laminated wing

A method is presented for calculating the shape sensitivity of a wing aeroelastic response with respect to changes in geometric shape. Yates' modified strip method is used in conjunction with Giles' equivalent plate analysis to predict the flutter speed, frequency, and reduced frequency of the wing. Three methods are used to calculate the sensitivity of the eigenvalue. The first method is purely a finite difference calculation of the eigenvalue derivative directly from the solution of the flutter problem corresponding to the two different values of the shape parameters. The second method uses an analytic expression for the eigenvalue sensitivities of a general complex matrix, where the derivatives of the aerodynamic, mass, and stiffness matrices are computed using a finite difference approximation. The third method also uses an analytic expression for the eigenvalue sensitivities, but the aerodynamic matrix is computed analytically. All three methods are found to be in good agreement with each other.

Kapania, Rakesh K.↗

On the shape and albedo variegation of asteroids - Results from Fourier analysis of synthetic and observed asteroid lightcurves

Fourier analyses have been conducted of those asteroids in the Lagerkvist et al. (1987) lightcurves with substantially complete phase coverage and point density, and for which a unique period has been identified. Fourier coefficients are thereby obtained for 188 lightcurves of 91 asteroids, as well as for 868 synthetic lightcurves from a set of models different in shape and albedo markings; by comparing model and asteroid lightcurve coefficients, the possible shape and albedo variations for 18 asteroids are derived. An attempt is made to define the general distribution of shapes of all asteroid samples analyzed.

Barucci, M. Antonietta↗

Effects of furnace temperature profile on the interface shape during Bridgman crystal growth

The effects of asymmetry in furnace temperature profile and pulling velocity on the crystal interface shape are demonstrated while neglecting the latent heat of solidification. It is concluded that the furnace temperature profile may be varied in order to influence the interface shape of the crystal. An exact thermal analysis is performed on the Bridgman technique by including the latent heat of solidification as a source term. The exact temperature field is obtained for the case of a flat melt-crystal interface. The earlier observation regarding the influence of furnace temperature profile on the crystal interface shape is confirmed and a criterion for a flat crystal interface is obtained. Various furnace temperature profiles are selected and their corresponding results are presented.

Taghavi, K.↗

Shape Gauge Measures Surfaces

Tedious measurements and calculations performed quickly and accurately. Optical/mechanical/electronic system acts as shape gauge by taking measurements of machine-tool motions or complicated contours of objects, then processing measurement data into maps or profiles indicative of shapes. Transducers of shape gauge mechanical/electronic or optomechanical/electronic components that move along path on surface and measure roundness, perpendicular deviation, or slope of surface. Because of ease and speed, many intersecting profiles measured on surface.

Veale, Ralph C.↗

Stripline feed for a microstrip array of patch elements with teardrop shaped probes

A circularly polarized microstrip array antenna utilizing a honeycomb substrate made of dielectric material to support on one side the microstrip patch elements in an array, and on the other side a stripline circuit for feeding the patch elements in subarray groups of four with angular orientation and phase for producing circularly polarized radiation, preferably at a 0, 90, 180, and 270 degree relationship is described. The probe used for coupling each feed point in the stripline circuit to a microstrip patch element is teardrop shaped in order to introduce capacitance between the coupling probe and the metal sheet of the stripline circuit that serves as an antenna ground plane. The capacitance thus introduced tunes out inductance of the probe. The shape of the teardrop probe is not critical. The probe capacitance required is controlled by the maximum diameter for the teardrop shaped probe, which can be empirically determined for the operating frequency. An aluminum baffle around each subarray blocks out surface wave between subarrays.

Huang, John↗

Screening actuator locations for static shape control

Correction of shape distortion due to zero-mean normally distributed errors in structural sizes which are random variables is examined. A bound on the maximum improvement in the expected value of the root-mean-square shape error is obtained. The shape correction associated with the optimal actuators is also characterized. An actuator effectiveness index is developed and shown to be helpful in screening actuator locations in the structure. The results are specialized to a simple form for truss structures composed of nominally identical members. The bound and effectiveness index are tested on a 55-m radiometer antenna truss structure. It is found that previously obtained results for optimum actuators had a performance close to the bound obtained here. Furthermore, the actuators associated with the optimum design are shown to have high effectiveness indices. Since only a small fraction of truss elements tend to have high effectiveness indices, the proposed screening procedure can greatly reduce the number of truss members that need to be considered as actuator sites.

Haftka, Raphael T.↗

Dual-shaped offset reflector antenna designs from solutions of the geometrical optics first-order partial differential equations

In obtaining solutions to the first-order nonlinear partial differential equations (PDEs) for synthesizing offset dual-shaped reflectors, it is found that previously observed computational problems can be avoided if the integration of the PDEs is started from an inner projected perimeter and integrated outward rather than starting from an outer projected perimeter and integrating inward. This procedure, however, introduces a new parameter, the main reflector inner perimeter radius p(o), when given a subreflector inner angle 0(o). Furthermore, a desired outer projected perimeter (e.g., a circle) is no longer guaranteed. Stability of the integration is maintained if some of the initial parameters are determined first from an approximate solution to the PDEs. A one-, two-, or three-parameter optimization algorithm can then be used to obtain a best set of parameters yielding a close fit to the desired projected outer rim. Good low cross-polarization mapping functions are also obtained. These methods are illustrated by synthesis of a high-gain offset-shaped Cassegrainian antenna and a low-noise offset-shaped Gregorian antenna.

Galindo-Israel, V.↗

A study of ice shape prediction methodologies and comparison with experimental data

Current analytical ice shape prediction methods are described and evaluated. The analyses of Gray (1958), Wilder (1969), and Bragg (1982) are compared with the prediction of the LEWICE computer analysis. The effects of time stepping and initial surface roughness on analysis predictions are studied utilizing the prediction methods and flight data. Rime, mixed, and glazed ice shapes at the leading edge of an airfoil are analyzed. It is observed that there is no change in ice shape prediction if ice accumulation is less than 0.01, a minimum of 2 time steps is need to incorporate time dependent behavior into the analysis, and the LEWICE analysis provided the most accurate predictions.

Korkan, K. D.↗

Statistical analysis of static shape control in space structures

The article addresses the problem of efficient analysis of the statistics of initial and corrected shape distortions in space structures. Two approaches for improving efficiency are considered. One is an adjoint technique for calculating distortion shapes: the second is a modal expansion of distortion shapes in terms of pseudo-vibration modes. The two techniques are applied to the problem of optimizing actuator locations on a 55 m radiometer antenna. The adjoint analysis technique is used with a discrete-variable optimization method. The modal approximation technique is coupled with a standard conjugate-gradient continuous optimization method. The agreement between the two sets of results is good, validating both the approximate analysis and optimality of the results.

Burdisso, Ricardo A.↗

Shape-memory properties in Ni-Ti sputter-deposited film

A Ni-Ti alloy, generically called nitinol, was prepared from sputtering targets of two different compositions on glass substrates using a dc magnetron source. The as-deposited films were amorphous in structure and did not exhibit a shape memory. The amorphous films were crystallized with a suitable annealing process, and the transformation properties were measured using differential scanning calorimetry. The annealed films demonstrated a strong shape-memory effect. Stress/strain measurements and physical manipulation were used to evaluate the shape recovery. These tests demonstrated sustained tensile stresses of up to 480 MPa in the high-temperature phase, and a characteristic plastic deformation in the low-temperature phase.

Busch, J. D.↗

Shortwave shape factor inversion of earth radiation budget observations

Results are presented on an investigation of the effects of various assumptions (including assumptions of a constant flux field, a constant albedo field, and a variable albedo field) used for deriving the shortwave shape factor on the estimates, from radiometric measurements, of the albedo at the top of the atmosphere. The accuracies and the resolutions of the shape-factor-flux estimates obtained using these assumptions are determined by simulating the shape factor inversion technique with scanner data from the Earth Radiation Budget Experiment (ERBE). The resulting biases and variances are given for both the ERBE medium-field-of-view and wide-field-of-view radiometers.

Green, Richard N.↗

Line-shape asymmetry of water vapor absorption lines in the 720-nm wavelength region

Spectral line-shape analyses were performed for water vapor lines broadened by argon, oxygen, and xenon in the 720-nm wavelength region. A line-shape asymmetry was observed, which is attributed to statistical dependence or correlation between velocity- and state-changing collisions. The generalized (asymmetric) Galatry profile, which results from the soft-collision profile and includes correlation between velocity- and state-changing collisions, was fitted to the observed line shapes and was found to compare favorably with the observed data. The most prominent asymmetries were observed with xenon as the buffer gas.

Grossmann, Benoist E.↗

Structural and optical properties for typical solid mirror shapes

A method is developed to determine the weight, center of gravity, areal properties, and mass inertial properties for typical mirrors. A number of support conditions were considered to examine optical surface deflections, surface quality, and fundamental natural frequency for single- and double-arch mirror shapes. Structural performance estimates were made with the NASTRAN program, and optical performances were evaluated with the FRINGE program, using an SXA 40-in mirror. To show the behavior of element types from the NASTRAN program, finite element validity and sensitivity studies were performed in optical model applications. Material parameters, contoured back shapes, and support locations are shown to have significant effects on structural and optical performances. Optimal support locations and support points are given. Fundamental natural frequencies for some shapes are found with the closed-form solution. The plate models results may not be acceptable for determining real mirror optical performances.

Cho, Myung K.↗