Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Numerical study of effect of secondary electron emission on discharge characteristics in low pressure capacitive RF argon discharge

Based on the drift and diffusion approximation theory, a 1D fluid model on capacitively coupled RF argon glow discharge at low pressure is established to study the effect of secondary electron emission (SEE) on the discharge characteristics. The model is numerically solved by using a finite difference method and the numerical results are obtained. The numerical results indicate that when the SEE coefficient is larger, the plasma density is higher and the time of reaching steady state is longer. It is also found that the cycle-averaged electric field, electric potential, and electron temperature change a little as the SEE coefficient is increased. Moreover, the discharge characteristics in some nonequilibrium discharge processes with different SEE coefficients have been compared. The analysis shows that when the SEE coefficient is varied from 0.01 to 0.3, the cycle-averaged electron net power absorption, electron heating rate, thermal convective term, electron energy dissipation, and ionization all have different degrees of growth. While the electron energy dissipation and ionization are quite special, there appear two peaks near each sheath region in the discharge with a relatively larger SEE coefficient. In this case, the discharge is certainly operated in a hybrid α-γ-mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Secondary electron emission from lithium and lithium compounds

In this work, measurements of electron-induced secondary electron emission ( SEE) yields of lithium as a function of composition are presented. The results are particularly relevant for magnetic fusion devices such as tokamaks, field-reversed configurations, and stellarators that consider Li as a plasma-facing material for improved plasma confinement. SEE can reduce the sheath potential at the wall and cool electrons at the plasma edge, resulting in large power losses. These effects become significant as the SEE coefficient, γ e , approaches one, making it imperative to maintain a low yield surface. This work demonstrates that the yield from Li strongly depends on chemical composition and substantially increases after exposure to oxygen and water vapor. The total yield was measured using a retarding field analyzer in ultrahigh vacuum for primary electron energies of 20-600 eV. The effect of Li composition was determined by introducing controlled amounts of O 2 and H 2 O vapor while monitoring film composition with Auger electron spectroscopy and temperature programmed desorption. The results show that the energy at which γ e = 1 decreases with oxygen content and is 145 eV for a Li film that is 17% oxidized and drops to less than 25 eV for a fully oxidized film. This work has important implications for laboratory plasmas operating under realistic vacuum conditions in which oxidation significantly alters the electron emission properties of Li walls. Published by AIP Publishing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Secondary electron emission from plasma-generated nanostructured tungsten fuzz

Recently, several researchers (e.g., Q. Yang, Y.-W. You, L. Liu, H. Fan, W. Ni, D. Liu, C. S. Liu, G. Benstetter, and Y. Wang, Scientific Reports 5, 10959 (2015)) have shown that tungsten fuzz can grow on a hot tungsten surface under bombardment by energetic helium ions in different plasma discharges and applications, including magnetic fusion devices with plasma facing tungsten components. This work reports direct measurements of the total effective secondary electron emission (SEE) from tungsten fuzz. Using dedicated material surface diagnostics and in-situ characterization, we find two important results: (1) SEE values for tungsten fuzz are 40-63% lower than for smooth tungsten and (2) the SEE values for tungsten fuzz are independent of the angle of the incident electron. The reduction in SEE from tungsten fuzz is most pronounced at high incident angles, which has important implications for many plasma devices since in a negative-going sheath the potential structure leads to relatively high incident angles for the electrons at the plasma confining walls. Overall, low SEE will create a relatively higher sheath potential difference that reduces plasma electron energy loss to the confining wall. Thus the presence or self-generation in a plasma of a low SEE surface such as tungsten fuzz can be desirable for improved performance of many plasma devices.:7px

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Finite boundary effects on the spherical Rayleigh–Taylor instability between viscous fluids

For the Rayleigh–Taylor unstable arrangement of a viscous fluid sphere embedded in a finite viscous fluid spherical shell with a rigid boundary and a radially directed acceleration, a dispersion relation is developed from a linear stability analysis using the method of normal modes. [Formula: see text] is the radially directed acceleration at the interface. ρ i denotes the density, μ i is the viscosity, and R i is the radius, where i = 1 is the inner sphere and i = 2 is the outer sphere. The dispersion relation is a function of the following dimensionless variables: viscosity ratio [Formula: see text], density ratio [Formula: see text], spherical harmonic mode n, [Formula: see text], [Formula: see text], and the dimensionless growth rate [Formula: see text], where σ is the exponential growth rate. We show that the boundedness provided by the outer spherical shell has a strong influence on the instability behavior, which is reflected not only in the modulation of the growth rate but also in the selection of the most unstable modes that are physically possible. This outer boundary effect is quantified by the relative magnitude of the radius ratio H. We find that when H is close to unity, lower order harmonics are excluded from becoming the most unstable within a vast region of the parameter space. In other words, the effect of H has precedence over the other controlling parameters d, B, and a wide range of s in establishing what the lowest most unstable mode can be. When H ~ 1, low order harmonics can become the most unstable only for s >> 1. However, in the limit when s → ∞, we show that the most unstable mode is n = 1 and derive the dispersion relation in this limit. The exclusion of most unstable low order harmonics caused by a finite outer boundary is not realized when the outer boundary extends beyond a certain threshold length-scale in which case all modes are equally possible depending on the value of B.

74 ATOMIC AND MOLECULAR PHYSICS↗

Secondary electron emission of reticulated foam materials

Complex material surfaces can reduce secondary electron emission (SEE) and sputtering via geometric trapping. In this work, the SEE yields for a range of open-cell reticulated carbon foam geometries are characterized using scanning electron microscopy. The total reduction in the SEE yield from carbon foams with a 3% volume fill density and 10–100 pores per inch (PPI) is shown to be between 23.5% and 35.0%. Contributions of a foam backplate are assessed by experimentally and analytically defining the critical parameter, transparency. The transparency of a foam is quantified and is shown to affect the primary electron angular dependence on the SEE yield. For the same thickness of 6 mm, it is found that higher PPI decreases foam transparency from 32% to 0% and reduces the SEE yield. The SEE yield from carbon foams is also shown to have weaker dependence on the morphology of the surface compared with fuzzes and velvets and less variation across individual sample surfaces due to the rigidity of their ligament structures and isotropic geometries.

Physics↗

Wall heating by subcritical energetic electrons generated by the runaway electron avalanche source *

Abstract Subcritical energetic electrons (SEEs) produced by the runaway electron (RE) avalanche source at energies below the runaway threshold are found to be the primary contributor to surface heating of plasma-facing components (PFCs) during final loss events. This finding is supported by theoretical analysis, computational modeling with the Kinetic Orbit Runaway electrons Code (KORC), and qualitative agreement with DIII-D experimental observations. The avalanche source generates significantly more secondary electrons below the runaway threshold, which thermalize rapidly when well-confined. However, during a final loss event, the RE beam impacts the first wall, and SEEs are deconfined before they can thermalize. Additionally, because the energy deposition length decreases faster than energy, the deposited energy density, and thus the maximum PFC surface temperature change, is larger for SEEs than REs. KORC simulations employ an analytic first wall to model particle deconfinement onto a non-axisymmetric wall composed of individual tiles. PFC surface heating is calculated using a 1D model extended to include an energy-dependent deposition length scale. Simulations of DIII-D qualitatively agree with infrared (IR) imaging only when SEEs from the avalanche source are included. These results demonstrate that SEEs are the dominant contributor to PFC surface heating and indicate that the avalanche source plays a critical role in the PFC damage caused during final loss events. The prominence of SEEs also has important implications for interpreting IR imaging, one of the primary diagnostics for RE-wall interaction diagnosis, despite REs dominating the energy and current density. This result improves predictions of wall damage due to post-disruption REs to estimate material lifetime and design RE mitigation systems for ITER and future reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Search for Θ+ in KLp→K+n reaction in KLF at JLab

The possibility of the existence of multiquark hadrons made of 4-quarks for mesons and 5-quarks for baryons was predicted by Gell-Mann [Phys. Lett. 8, 214 (1964)]. The renewed interest for the search for exotic pentaquark states was initiated by the paper by Diakonov, Petrov, and Polyakov [Z. Phys. A 359, 305 (1997)]. The 2003 experimental reports on the observation of [Formula: see text] pentaquark with [Formula: see text] quark content created a great excitement and many following experiments have reported its observation [K. H. Hicks, Eur. Phys. J. H 37, 1 (2012)]. After high-statistics experiments at JLab, which did not confirm previous claims by the CLAS collaboration, the community concluded that the [Formula: see text] pentaquark either does not exist at all or has an extremely small cross-section, making it currently unobserved. There were different review papers on this subject, questioning the existence of [Formula: see text] or trying to explain the reasons why reaching a conclusion based on production experiments is challenging [M. Amaryan, Eur. Phys. J. Plus 137, 684 (2022)]. To address the challenge of minimal 3-body final states, a formation experiment with a projectile-kaon beam is proposed. In the following, we discuss how the [Formula: see text] could be observed in the [Formula: see text] reaction in the KLF experiment at JLab [M. Amaryan et al. [KLF Collaboration], arXiv:2008.08215 [nucl-ex]].

Astronomy & Astrophysics↗

Partition functions of $\mathcal{N}$ = 1 gauge theories on S 2 × $\mathbb{R}_ε^2$ and duality

We compute the partition functions of [Formula: see text] gauge theories on [Formula: see text] using supersymmetric localization. The path integral reduces to a sum over vortices at the poles of [Formula: see text] and at the origin of [Formula: see text]. The exact partition functions allow us to test Seiberg duality beyond the supersymmetric index. We propose the [Formula: see text] partition functions on the [Formula: see text]-background, and show that the Nekrasov partition functions can be recovered from these building blocks.

Physics↗

Entanglement minimization in hadronic scattering with pions

Recent work [S. R. Beane, D. B. Kaplan, N. Klco and M. J. Savage, Phys. Rev. Lett. 122, 102001 (2019), arXiv:1812.03138.] conjectured that entanglement is minimized in low-energy hadronic scattering processes. It was shown that the minimization of the entanglement power (EP) of the low-energy baryon–baryon [Formula: see text]-matrix implies novel spin–flavor symmetries that are distinct from large-[Formula: see text] QCD predictions and are confirmed by high-precision lattice QCD simulations. Here, the conjecture of minimal entanglement is investigated for scattering processes involving pions and nucleons. The EP of the [Formula: see text]-matrix is constructed for the [Formula: see text] and [Formula: see text] systems, and the consequences of minimization of entanglement are discussed and compared with large-[Formula: see text] QCD expectations.

Physics↗

A solvable quantum field theory with asymptotic freedom in (3+1) dimensions

Recently, Ai, Bender and Sarkar gave a prescription on how to obtain [Formula: see text]-symmetric field theory results from an analytic continuation of Hermitian field theories. We perform this analytic continuation for the massless (critical) [Formula: see text] model with quartic interaction in (3+1) dimensions. In the large-[Formula: see text] limit, this theory is exactly solvable, and has negative [Formula: see text]-function in the ultraviolet, and a stable bound state in the infrared. The coupling diverges at a scale [Formula: see text], but can be continued into the far infrared. At finite temperature, the theory exhibits two phases separated by a second-order phase transition near [Formula: see text].

Physics↗

Refined large N duality for knots

We formulate large [Formula: see text] duality of [Formula: see text] refined Chern–Simons theory with a torus knot/link in [Formula: see text]. By studying refined BPS states in M-theory, we provide the explicit form of low-energy effective actions of Type IIA string theory with D4-branes on the [Formula: see text]-background. This form enables us to relate refined Chern–Simons invariants of a torus knot/link in [Formula: see text] to refined BPS invariants in the resolved conifold. Assuming that the extra [Formula: see text] global symmetry acts on BPS states trivially, the duality predicts graded dimensions of cohomology groups of moduli spaces of M2–M5 bound states associated to a torus knot/link in the resolved conifold. Thus, this formulation can be also interpreted as a positivity conjecture of refined Chern–Simons invariants of torus knots/links. We also discuss about an extension to non-torus knots.

Mathematics↗

Materials Data on KSb5S8 by Materials Project

KSb5S8 crystallizes in the monoclinic Pc space group. The structure is three-dimensional. there are two inequivalent K1+ sites. In the first K1+ site, K1+ is bonded in a 7-coordinate geometry to seven S2- atoms. There are a spread of K–S bond distances ranging from 3.19–3.47 Å. In the second K1+ site, K1+ is bonded in a 9-coordinate geometry to nine S2- atoms. There are a spread of K–S bond distances ranging from 3.29–3.88 Å. There are ten inequivalent Sb3+ sites. In the first Sb3+ site, Sb3+ is bonded to five S2- atoms to form a mixture of distorted edge and corner-sharing SbS5 square pyramids. There are a spread of Sb–S bond distances ranging from 2.49–3.23 Å. In the second Sb3+ site, Sb3+ is bonded in a distorted rectangular see-saw-like geometry to four S2- atoms. There are a spread of Sb–S bond distances ranging from 2.46–3.22 Å. In the third Sb3+ site, Sb3+ is bonded in a 4-coordinate geometry to four S2- atoms. There are a spread of Sb–S bond distances ranging from 2.47–3.14 Å. In the fourth Sb3+ site, Sb3+ is bonded in a distorted rectangular see-saw-like geometry to four S2- atoms. There are a spread of Sb–S bond distances ranging from 2.46–3.13 Å. In the fifth Sb3+ site, Sb3+ is bonded to five S2- atoms to form distorted edge-sharing SbS5 square pyramids. There are a spread of Sb–S bond distances ranging from 2.44–3.25 Å. In the sixth Sb3+ site, Sb3+ is bonded to five S2- atoms to form distorted edge-sharing SbS5 square pyramids. There are a spread of Sb–S bond distances ranging from 2.44–3.24 Å. In the seventh Sb3+ site, Sb3+ is bonded to five S2- atoms to form a mixture of edge and corner-sharing SbS5 square pyramids. There are a spread of Sb–S bond distances ranging from 2.54–3.09 Å. In the eighth Sb3+ site, Sb3+ is bonded in a see-saw-like geometry to four S2- atoms. There are a spread of Sb–S bond distances ranging from 2.48–2.79 Å. In the ninth Sb3+ site, Sb3+ is bonded in a distorted rectangular see-saw-like geometry to four S2- atoms. There are a spread of Sb–S bond distances ranging from 2.48–3.17 Å. In the tenth Sb3+ site, Sb3+ is bonded to five S2- atoms to form edge-sharing SbS5 square pyramids. There are a spread of Sb–S bond distances ranging from 2.49–2.83 Å. There are sixteen inequivalent S2- sites. In the first S2- site, S2- is bonded in a 4-coordinate geometry to two equivalent K1+ and two Sb3+ atoms. In the second S2- site, S2- is bonded in a distorted bent 120 degrees geometry to three Sb3+ atoms. In the third S2- site, S2- is bonded to two equivalent K1+ and two Sb3+ atoms to form a mixture of distorted edge and corner-sharing SK2Sb2 trigonal pyramids. In the fourth S2- site, S2- is bonded in a distorted rectangular see-saw-like geometry to two equivalent K1+ and two Sb3+ atoms. In the fifth S2- site, S2- is bonded in a 5-coordinate geometry to one K1+ and four Sb3+ atoms. In the sixth S2- site, S2- is bonded in a 4-coordinate geometry to four Sb3+ atoms. In the seventh S2- site, S2- is bonded in a 4-coordinate geometry to four Sb3+ atoms. In the eighth S2- site, S2- is bonded in a 3-coordinate geometry to one K1+ and two Sb3+ atoms. In the ninth S2- site, S2- is bonded in a 3-coordinate geometry to one K1+ and two Sb3+ atoms. In the tenth S2- site, S2- is bonded in a distorted trigonal pyramidal geometry to one K1+ and three Sb3+ atoms. In the eleventh S2- site, S2- is bonded in a 4-coordinate geometry to two equivalent K1+ and two Sb3+ atoms. In the twelfth S2- site, S2- is bonded in a 3-coordinate geometry to one K1+ and three Sb3+ atoms. In the thirteenth S2- site, S2- is bonded in a 2-coordinate geometry to three Sb3+ atoms. In the fourteenth S2- site, S2- is bonded in a 4-coordinate geometry to one K1+ and three Sb3+ atoms. In the fifteenth S2- site, S2- is bonded to one K1+ and three Sb3+ atoms to form a mixture of distorted edge and corner-sharing SKSb3 trigonal pyramids. In the sixteenth S2- site, S2- is bonded in a distorted rectangular see-saw-like geometry to one K1+ and three Sb3+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on Li4Ge5O12 by Materials Project

Li4Ge5O12 crystallizes in the triclinic P-1 space group. The structure is three-dimensional. there are four inequivalent Li1+ sites. In the first Li1+ site, Li1+ is bonded to six O2- atoms to form LiO6 octahedra that share corners with two LiO6 octahedra, corners with six GeO4 tetrahedra, edges with two equivalent LiO6 octahedra, and edges with three GeO6 octahedra. The corner-sharing octahedra tilt angles range from 13–14°. There are a spread of Li–O bond distances ranging from 2.06–2.37 Å. In the second Li1+ site, Li1+ is bonded to six O2- atoms to form LiO6 octahedra that share corners with two GeO6 octahedra, corners with four GeO4 tetrahedra, edges with three LiO6 octahedra, and edges with three equivalent GeO6 octahedra. The corner-sharing octahedra tilt angles range from 13–15°. There are a spread of Li–O bond distances ranging from 2.02–2.26 Å. In the third Li1+ site, Li1+ is bonded to six O2- atoms to form LiO6 octahedra that share a cornercorner with one LiO6 octahedra, corners with three GeO6 octahedra, corners with two GeO4 tetrahedra, edges with four LiO6 octahedra, and edges with four GeO6 octahedra. The corner-sharing octahedra tilt angles range from 9–13°. There are a spread of Li–O bond distances ranging from 2.03–2.30 Å. In the fourth Li1+ site, Li1+ is bonded to six O2- atoms to form LiO6 octahedra that share a cornercorner with one LiO6 octahedra, corners with three GeO6 octahedra, edges with three LiO6 octahedra, and edges with six GeO6 octahedra. The corner-sharing octahedra tilt angles range from 8–14°. There are a spread of Li–O bond distances ranging from 2.08–2.26 Å. There are five inequivalent Ge4+ sites. In the first Ge4+ site, Ge4+ is bonded to six O2- atoms to form GeO6 octahedra that share corners with three LiO6 octahedra, a cornercorner with one GeO4 tetrahedra, edges with four GeO6 octahedra, and edges with five LiO6 octahedra. The corner-sharing octahedra tilt angles range from 8–15°. There are a spread of Ge–O bond distances ranging from 1.86–2.01 Å. In the second Ge4+ site, Ge4+ is bonded to four O2- atoms to form GeO4 tetrahedra that share corners with two GeO6 octahedra, corners with six LiO6 octahedra, and corners with two equivalent GeO4 tetrahedra. The corner-sharing octahedra tilt angles range from 54–66°. There are a spread of Ge–O bond distances ranging from 1.76–1.81 Å. In the third Ge4+ site, Ge4+ is bonded to six O2- atoms to form GeO6 octahedra that share corners with three LiO6 octahedra, a cornercorner with one GeO4 tetrahedra, edges with three GeO6 octahedra, and edges with six LiO6 octahedra. The corner-sharing octahedra tilt angles range from 11–13°. There are a spread of Ge–O bond distances ranging from 1.88–2.02 Å. In the fourth Ge4+ site, Ge4+ is bonded to four O2- atoms to form GeO4 tetrahedra that share corners with two GeO6 octahedra, corners with six LiO6 octahedra, and corners with two equivalent GeO4 tetrahedra. The corner-sharing octahedra tilt angles range from 55–64°. There are a spread of Ge–O bond distances ranging from 1.75–1.81 Å. In the fifth Ge4+ site, Ge4+ is bonded to six O2- atoms to form GeO6 octahedra that share corners with two LiO6 octahedra, corners with two GeO4 tetrahedra, edges with three GeO6 octahedra, and edges with five LiO6 octahedra. The corner-sharing octahedral tilt angles are 11°. There are a spread of Ge–O bond distances ranging from 1.85–2.04 Å. There are twelve inequivalent O2- sites. In the first O2- site, O2- is bonded in a trigonal planar geometry to one Li1+ and two Ge4+ atoms. In the second O2- site, O2- is bonded to three Li1+ and two equivalent Ge4+ atoms to form a mixture of corner and edge-sharing OLi3Ge2 square pyramids. In the third O2- site, O2- is bonded in a distorted rectangular see-saw-like geometry to two Li1+ and two Ge4+ atoms. In the fourth O2- site, O2- is bonded to three Li1+ and two Ge4+ atoms to form a mixture of corner and edge-sharing OLi3Ge2 square pyramids. In the fifth O2- site, O2- is bonded to two Li1+ and three Ge4+ atoms to form a mixture of corner and edge-sharing OLi2Ge3 square pyramids. In the sixth O2- site, O2- is bonded in a distorted rectangular see-saw-like geometry to two Li1+ and two Ge4+ atoms. In the seventh O2- site, O2- is bonded in a see-saw-like geometry to two Li1+ and two Ge4+ atoms. In the eighth O2- site, O2- is bonded to two equivalent Li1+ and three Ge4+ atoms to form OLi2Ge3 square pyramids that share corners with three OLi3Ge2 square pyramids and edges with five OLi2Ge3 square pyramids. In the ninth O2- site, O2- is bonded in a rectangular see-saw-like geometry to two Li1+ and two Ge4+ atoms. In the tenth O2- site, O2- is bonded in a trigonal planar geometry to one Li1+ and two Ge4+ atoms. In the eleventh O2- site, O2- is bonded in a distorted rectangular see-saw-like geometry to two equivalent Li1+ and two Ge4+ atoms. In the twelfth O2- site, O2- is bonded in a distorted rectangular see-saw-like geometry to two equivalent Li1+ and two Ge4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on Mg14Si5O24 by Materials Project

Mg14Si5O24 crystallizes in the orthorhombic Pbam space group. The structure is three-dimensional. there are six inequivalent Mg2+ sites. In the first Mg2+ site, Mg2+ is bonded to six O2- atoms to form MgO6 octahedra that share corners with five MgO6 octahedra, a cornercorner with one SiO4 tetrahedra, an edgeedge with one SiO6 octahedra, edges with six MgO6 octahedra, and an edgeedge with one SiO4 tetrahedra. The corner-sharing octahedra tilt angles range from 3–62°. There are a spread of Mg–O bond distances ranging from 2.07–2.16 Å. In the second Mg2+ site, Mg2+ is bonded to six O2- atoms to form MgO6 octahedra that share corners with six MgO6 octahedra, corners with four SiO4 tetrahedra, an edgeedge with one SiO6 octahedra, and edges with four MgO6 octahedra. The corner-sharing octahedra tilt angles range from 17–62°. There are a spread of Mg–O bond distances ranging from 2.04–2.22 Å. In the third Mg2+ site, Mg2+ is bonded to six O2- atoms to form MgO6 octahedra that share corners with three equivalent MgO6 octahedra, corners with three SiO4 tetrahedra, an edgeedge with one SiO6 octahedra, and edges with seven MgO6 octahedra. The corner-sharing octahedra tilt angles range from 3–14°. There are a spread of Mg–O bond distances ranging from 2.06–2.13 Å. In the fourth Mg2+ site, Mg2+ is bonded to six O2- atoms to form MgO6 octahedra that share corners with six MgO6 octahedra, edges with two equivalent SiO6 octahedra, and edges with eight MgO6 octahedra. The corner-sharing octahedra tilt angles range from 1–17°. All Mg–O bond lengths are 2.14 Å. In the fifth Mg2+ site, Mg2+ is bonded to six O2- atoms to form MgO6 octahedra that share corners with five MgO6 octahedra, corners with three SiO4 tetrahedra, edges with five MgO6 octahedra, and an edgeedge with one SiO4 tetrahedra. The corner-sharing octahedra tilt angles range from 1–58°. There are a spread of Mg–O bond distances ranging from 2.00–2.25 Å. In the sixth Mg2+ site, Mg2+ is bonded to six O2- atoms to form MgO6 octahedra that share corners with six SiO4 tetrahedra and edges with six MgO6 octahedra. There are two shorter (2.03 Å) and four longer (2.17 Å) Mg–O bond lengths. There are three inequivalent Si4+ sites. In the first Si4+ site, Si4+ is bonded to four O2- atoms to form SiO4 tetrahedra that share corners with six MgO6 octahedra and edges with three MgO6 octahedra. The corner-sharing octahedra tilt angles range from 51–58°. There are a spread of Si–O bond distances ranging from 1.63–1.66 Å. In the second Si4+ site, Si4+ is bonded to six O2- atoms to form SiO6 octahedra that share edges with twelve MgO6 octahedra. There is four shorter (1.82 Å) and two longer (1.84 Å) Si–O bond length. In the third Si4+ site, Si4+ is bonded to four O2- atoms to form SiO4 tetrahedra that share corners with twelve MgO6 octahedra. The corner-sharing octahedra tilt angles range from 52–57°. There is one shorter (1.67 Å) and three longer (1.68 Å) Si–O bond length. There are nine inequivalent O2- sites. In the first O2- site, O2- is bonded in a rectangular see-saw-like geometry to three Mg2+ and one Si4+ atom. In the second O2- site, O2- is bonded in a rectangular see-saw-like geometry to three Mg2+ and one Si4+ atom. In the third O2- site, O2- is bonded to six Mg2+ atoms to form OMg6 octahedra that share a cornercorner with one OMg6 octahedra and edges with six OMg4Si square pyramids. The corner-sharing octahedral tilt angles are 0°. In the fourth O2- site, O2- is bonded in a rectangular see-saw-like geometry to three Mg2+ and one Si4+ atom. In the fifth O2- site, O2- is bonded in a rectangular see-saw-like geometry to three Mg2+ and one Si4+ atom. In the sixth O2- site, O2- is bonded to four Mg2+ and one Si4+ atom to form OMg4Si square pyramids that share corners with three equivalent OMg4Si square pyramids, edges with two equivalent OMg6 octahedra, and edges with four OMg4Si square pyramids. In the seventh O2- site, O2- is bonded to four Mg2+ and one Si4+ atom to form OMg4Si square pyramids that share a cornercorner with one OMg4Si square pyramid, edges with two equivalent OMg6 octahedra, and edges with four equivalent OMg4Si square pyramids. In the eighth O2- site, O2- is bonded in a rectangular see-saw-like geometry to three Mg2+ and one Si4+ atom. In the ninth O2- site, O2- is bonded in a rectangular see-saw-like geometry to three Mg2+ and one Si4+ atom.

36 MATERIALS SCIENCE↗

Materials Data on Ca2Bi2O5 by Materials Project

Ca2Bi2O5 crystallizes in the triclinic P-1 space group. The structure is three-dimensional. there are six inequivalent Ca2+ sites. In the first Ca2+ site, Ca2+ is bonded to six O2- atoms to form a mixture of distorted edge and corner-sharing CaO6 octahedra. The corner-sharing octahedral tilt angles are 27°. There are a spread of Ca–O bond distances ranging from 2.33–2.61 Å. In the second Ca2+ site, Ca2+ is bonded in a 6-coordinate geometry to six O2- atoms. There are a spread of Ca–O bond distances ranging from 2.29–2.60 Å. In the third Ca2+ site, Ca2+ is bonded to six O2- atoms to form a mixture of distorted edge and corner-sharing CaO6 octahedra. The corner-sharing octahedra tilt angles range from 4–27°. There are a spread of Ca–O bond distances ranging from 2.30–2.91 Å. In the fourth Ca2+ site, Ca2+ is bonded to six O2- atoms to form a mixture of distorted edge and corner-sharing CaO6 octahedra. The corner-sharing octahedral tilt angles are 4°. There are a spread of Ca–O bond distances ranging from 2.26–2.75 Å. In the fifth Ca2+ site, Ca2+ is bonded in a 6-coordinate geometry to six O2- atoms. There are a spread of Ca–O bond distances ranging from 2.29–2.66 Å. In the sixth Ca2+ site, Ca2+ is bonded in a 6-coordinate geometry to six O2- atoms. There are a spread of Ca–O bond distances ranging from 2.31–2.87 Å. There are six inequivalent Bi3+ sites. In the first Bi3+ site, Bi3+ is bonded in a rectangular see-saw-like geometry to four O2- atoms. There are a spread of Bi–O bond distances ranging from 2.10–2.44 Å. In the second Bi3+ site, Bi3+ is bonded in a distorted rectangular see-saw-like geometry to four O2- atoms. There are a spread of Bi–O bond distances ranging from 2.08–2.38 Å. In the third Bi3+ site, Bi3+ is bonded in a 6-coordinate geometry to six O2- atoms. There are a spread of Bi–O bond distances ranging from 2.16–3.05 Å. In the fourth Bi3+ site, Bi3+ is bonded in a distorted rectangular see-saw-like geometry to four O2- atoms. There are a spread of Bi–O bond distances ranging from 2.10–2.99 Å. In the fifth Bi3+ site, Bi3+ is bonded in a distorted see-saw-like geometry to four O2- atoms. There are a spread of Bi–O bond distances ranging from 2.13–2.34 Å. In the sixth Bi3+ site, Bi3+ is bonded in a rectangular see-saw-like geometry to four O2- atoms. There are a spread of Bi–O bond distances ranging from 2.10–2.63 Å. There are fifteen inequivalent O2- sites. In the first O2- site, O2- is bonded in a 2-coordinate geometry to four Bi3+ atoms. In the second O2- site, O2- is bonded in a 4-coordinate geometry to two Ca2+ and two Bi3+ atoms. In the third O2- site, O2- is bonded to three Ca2+ and one Bi3+ atom to form distorted OCa3Bi trigonal pyramids that share corners with two equivalent OCa3Bi tetrahedra, a cornercorner with one OCa4Bi trigonal bipyramid, corners with five OCa3Bi trigonal pyramids, an edgeedge with one OCaBi3 tetrahedra, and an edgeedge with one OCa2Bi2 trigonal pyramid. In the fourth O2- site, O2- is bonded to one Ca2+ and three Bi3+ atoms to form distorted OCaBi3 tetrahedra that share corners with two OCa3Bi tetrahedra, corners with four OCa2Bi2 trigonal pyramids, and an edgeedge with one OCa3Bi trigonal pyramid. In the fifth O2- site, O2- is bonded to two Ca2+ and two Bi3+ atoms to form distorted OCa2Bi2 trigonal pyramids that share corners with three OCa2Bi2 tetrahedra, corners with four OCa3Bi trigonal pyramids, and edges with two OCa3Bi trigonal pyramids. In the sixth O2- site, O2- is bonded to three Ca2+ and one Bi3+ atom to form distorted OCa3Bi trigonal pyramids that share corners with two OCa3Bi tetrahedra, a cornercorner with one OCa4Bi trigonal bipyramid, corners with four OCa2Bi2 trigonal pyramids, edges with two OCa2Bi2 tetrahedra, and an edgeedge with one OCa3Bi trigonal pyramid. In the seventh O2- site, O2- is bonded in a 5-coordinate geometry to four Ca2+ and one Bi3+ atom. In the eighth O2- site, O2- is bonded to two Ca2+ and two Bi3+ atoms to form distorted OCa2Bi2 trigonal pyramids that share corners with three OCa3Bi tetrahedra, corners with four OCa3Bi trigonal pyramids, and edges with two OCa2Bi2 trigonal pyramids. In the ninth O2- site, O2- is bonded to three Ca2+ and one Bi3+ atom to form distorted OCa3Bi trigonal pyramids that share corners with three OCa3Bi tetrahedra, corners with three OCa2Bi2 trigonal pyramids, and edges with two equivalent OCa4Bi trigonal bipyramids. In the tenth O2- site, O2- is bonded to three Ca2+ and one Bi3+ atom to form distorted OCa3Bi trigonal pyramids that share a cornercorner with one OCa2Bi2 tetrahedra, a cornercorner with one OCa4Bi trigonal bipyramid, corners with six OCa2Bi2 trigonal pyramids, and edges with two OCa3Bi trigonal pyramids. In the eleventh O2- site, O2- is bonded to four Ca2+ and one Bi3+ atom to form distorted OCa4Bi trigonal bipyramids that share corners with two OCa3Bi tetrahedra, corners with three OCa3Bi trigonal pyramids, an edgeedge with one OCa3Bi tetrahedra, an edgeedge with one OCa4Bi trigonal bipyramid, and edges with two equivalent OCa3Bi trigonal pyramids. In the twelfth O2- site, O2- is bonded to three Ca2+ and one Bi3+ atom to form OCa3Bi tetrahedra that share corners with two OCa2Bi2 tetrahedra, a cornercorner with one OCa4Bi trigonal bipyramid, corners with five OCa3Bi trigonal pyramids, an edgeedge with one OCa4Bi trigonal bipyramid, and an edgeedge with one OCa3Bi trigonal pyramid. In the thirteenth O2- site, O2- is bonded in a distorted rectangular see-saw-like geometry to two equivalent Ca2+ and two Bi3+ atoms. In the fourteenth O2- site, O2- is bonded to two Ca2+ and two Bi3+ atoms to form OCa2Bi2 tetrahedra that share corners with two OCa3Bi tetrahedra, a cornercorner with one OCa4Bi trigonal bipyramid, corners with five OCa2Bi2 trigonal pyramids, and an edgeedge with one OCa3Bi trigonal pyramid. In the fifteenth O2- site, O2- is bonded in a 4-coordinate geometry to two Ca2+ and two Bi3+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on Ca5(CuO2)6 by Materials Project

Ca5(CuO2)6 crystallizes in the monoclinic P2/c space group. The structure is three-dimensional. there are five inequivalent Ca2+ sites. In the first Ca2+ site, Ca2+ is bonded to six O2- atoms to form edge-sharing CaO6 octahedra. There are a spread of Ca–O bond distances ranging from 2.35–2.41 Å. In the second Ca2+ site, Ca2+ is bonded to six O2- atoms to form edge-sharing CaO6 octahedra. There are a spread of Ca–O bond distances ranging from 2.34–2.42 Å. In the third Ca2+ site, Ca2+ is bonded to six O2- atoms to form distorted edge-sharing CaO6 octahedra. There are a spread of Ca–O bond distances ranging from 2.33–2.54 Å. In the fourth Ca2+ site, Ca2+ is bonded to six O2- atoms to form distorted edge-sharing CaO6 octahedra. There are a spread of Ca–O bond distances ranging from 2.33–2.57 Å. In the fifth Ca2+ site, Ca2+ is bonded in a 4-coordinate geometry to eight O2- atoms. There are a spread of Ca–O bond distances ranging from 2.31–2.83 Å. There are eight inequivalent Cu+2.33+ sites. In the first Cu+2.33+ site, Cu+2.33+ is bonded in a square co-planar geometry to four O2- atoms. There is two shorter (1.97 Å) and two longer (2.01 Å) Cu–O bond length. In the second Cu+2.33+ site, Cu+2.33+ is bonded in a rectangular see-saw-like geometry to four O2- atoms. There are a spread of Cu–O bond distances ranging from 1.90–1.92 Å. In the third Cu+2.33+ site, Cu+2.33+ is bonded in a rectangular see-saw-like geometry to four O2- atoms. There are a spread of Cu–O bond distances ranging from 1.93–1.99 Å. In the fourth Cu+2.33+ site, Cu+2.33+ is bonded in a square co-planar geometry to four O2- atoms. There is two shorter (1.87 Å) and two longer (1.89 Å) Cu–O bond length. In the fifth Cu+2.33+ site, Cu+2.33+ is bonded in a square co-planar geometry to four O2- atoms. There is two shorter (1.97 Å) and two longer (2.00 Å) Cu–O bond length. In the sixth Cu+2.33+ site, Cu+2.33+ is bonded in a rectangular see-saw-like geometry to four O2- atoms. There is one shorter (1.90 Å) and three longer (1.91 Å) Cu–O bond length. In the seventh Cu+2.33+ site, Cu+2.33+ is bonded in a rectangular see-saw-like geometry to four O2- atoms. There are a spread of Cu–O bond distances ranging from 1.93–1.99 Å. In the eighth Cu+2.33+ site, Cu+2.33+ is bonded in a square co-planar geometry to four O2- atoms. There is two shorter (1.87 Å) and two longer (1.89 Å) Cu–O bond length. There are twelve inequivalent O2- sites. In the first O2- site, O2- is bonded in a 5-coordinate geometry to three Ca2+ and two Cu+2.33+ atoms. In the second O2- site, O2- is bonded to three Ca2+ and two Cu+2.33+ atoms to form distorted OCa3Cu2 trigonal bipyramids that share corners with three OCa3Cu2 square pyramids, a cornercorner with one OCa3Cu2 trigonal bipyramid, a cornercorner with one OCa2Cu2 trigonal pyramid, an edgeedge with one OCa3Cu2 square pyramid, an edgeedge with one OCa3Cu2 trigonal bipyramid, and an edgeedge with one OCa2Cu2 trigonal pyramid. In the third O2- site, O2- is bonded to two Ca2+ and two equivalent Cu+2.33+ atoms to form distorted OCa2Cu2 trigonal pyramids that share a cornercorner with one OCa3Cu2 square pyramid, a cornercorner with one OCa3Cu2 trigonal bipyramid, a cornercorner with one OCa2Cu2 trigonal pyramid, an edgeedge with one OCa3Cu2 trigonal bipyramid, and an edgeedge with one OCa2Cu2 trigonal pyramid. In the fourth O2- site, O2- is bonded in a 4-coordinate geometry to three Ca2+ and two Cu+2.33+ atoms. In the fifth O2- site, O2- is bonded to three Ca2+ and two Cu+2.33+ atoms to form distorted OCa3Cu2 trigonal bipyramids that share corners with three OCa3Cu2 square pyramids, a cornercorner with one OCa3Cu2 trigonal bipyramid, a cornercorner with one OCa2Cu2 trigonal pyramid, an edgeedge with one OCa3Cu2 square pyramid, an edgeedge with one OCa3Cu2 trigonal bipyramid, and an edgeedge with one OCa2Cu2 trigonal pyramid. In the sixth O2- site, O2- is bonded to two Ca2+ and two equivalent Cu+2.33+ atoms to form distorted OCa2Cu2 trigonal pyramids that share a cornercorner with one OCa3Cu2 square pyramid, a cornercorner with one OCa3Cu2 trigonal bipyramid, a cornercorner with one OCa2Cu2 trigonal pyramid, an edgeedge with one OCa3Cu2 trigonal bipyramid, and an edgeedge with one OCa2Cu2 trigonal pyramid. In the seventh O2- site, O2- is bonded to three Ca2+ and two equivalent Cu+2.33+ atoms to form distorted OCa3Cu2 square pyramids that share corners with three OCa3Cu2 trigonal bipyramids, a cornercorner with one OCa2Cu2 trigonal pyramid, edges with two OCa3Cu2 square pyramids, and an edgeedge with one OCa3Cu2 trigonal bipyramid. In the eighth O2- site, O2- is bonded in a 5-coordinate geometry to three Ca2+ and two Cu+2.33+ atoms. In the ninth O2- site, O2- is bonded in a distorted see-saw-like geometry to two Ca2+ and two Cu+2.33+ atoms. In the tenth O2- site, O2- is bonded to three Ca2+ and two equivalent Cu+2.33+ atoms to form distorted OCa3Cu2 square pyramids that share corners with three OCa3Cu2 trigonal bipyramids, a cornercorner with one OCa2Cu2 trigonal pyramid, edges with two OCa3Cu2 square pyramids, and an edgeedge with one OCa3Cu2 trigonal bipyramid. In the eleventh O2- site, O2- is bonded in a 4-coordinate geometry to three Ca2+ and two Cu+2.33+ atoms. In the twelfth O2- site, O2- is bonded in a distorted see-saw-like geometry to two Ca2+ and two Cu+2.33+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on Al2CuO4 by Materials Project

CuAl2O4 is Spinel-like structured and crystallizes in the trigonal P3m1 space group. The structure is three-dimensional. there are six inequivalent Cu2+ sites. In the first Cu2+ site, Cu2+ is bonded to four O2- atoms to form CuO4 tetrahedra that share corners with three equivalent CuO6 octahedra and corners with nine AlO6 octahedra. The corner-sharing octahedra tilt angles range from 56–63°. There is three shorter (1.95 Å) and one longer (1.97 Å) Cu–O bond length. In the second Cu2+ site, Cu2+ is bonded to six O2- atoms to form CuO6 octahedra that share corners with three equivalent CuO4 tetrahedra, corners with three equivalent AlO4 tetrahedra, and edges with six AlO6 octahedra. There are three shorter (2.00 Å) and three longer (2.10 Å) Cu–O bond lengths. In the third Cu2+ site, Cu2+ is bonded to four O2- atoms to form CuO4 tetrahedra that share corners with three equivalent CuO6 octahedra and corners with nine AlO6 octahedra. The corner-sharing octahedra tilt angles range from 57–62°. There is three shorter (1.94 Å) and one longer (1.98 Å) Cu–O bond length. In the fourth Cu2+ site, Cu2+ is bonded to four O2- atoms to form CuO4 tetrahedra that share corners with twelve AlO6 octahedra. The corner-sharing octahedra tilt angles range from 59–60°. There is one shorter (1.96 Å) and three longer (1.97 Å) Cu–O bond length. In the fifth Cu2+ site, Cu2+ is bonded to six O2- atoms to form CuO6 octahedra that share corners with three equivalent CuO4 tetrahedra, corners with three equivalent AlO4 tetrahedra, and edges with six AlO6 octahedra. There are three shorter (1.99 Å) and three longer (2.11 Å) Cu–O bond lengths. In the sixth Cu2+ site, Cu2+ is bonded to four O2- atoms to form CuO4 tetrahedra that share corners with twelve AlO6 octahedra. The corner-sharing octahedra tilt angles range from 60–62°. There are three shorter (1.99 Å) and one longer (2.08 Å) Cu–O bond lengths. There are six inequivalent Al3+ sites. In the first Al3+ site, Al3+ is bonded to six O2- atoms to form AlO6 octahedra that share corners with three CuO4 tetrahedra, corners with three AlO4 tetrahedra, edges with two CuO6 octahedra, and edges with four equivalent AlO6 octahedra. There are a spread of Al–O bond distances ranging from 1.89–2.00 Å. In the second Al3+ site, Al3+ is bonded to six O2- atoms to form AlO6 octahedra that share a cornercorner with one AlO4 tetrahedra, corners with five CuO4 tetrahedra, an edgeedge with one CuO6 octahedra, and edges with five AlO6 octahedra. There are a spread of Al–O bond distances ranging from 1.90–2.05 Å. In the third Al3+ site, Al3+ is bonded to four O2- atoms to form AlO4 tetrahedra that share corners with three equivalent CuO6 octahedra and corners with nine AlO6 octahedra. The corner-sharing octahedra tilt angles range from 55–62°. All Al–O bond lengths are 1.84 Å. In the fourth Al3+ site, Al3+ is bonded to six O2- atoms to form AlO6 octahedra that share corners with six CuO4 tetrahedra and edges with six AlO6 octahedra. There is three shorter (1.92 Å) and three longer (1.93 Å) Al–O bond length. In the fifth Al3+ site, Al3+ is bonded to six O2- atoms to form AlO6 octahedra that share corners with two equivalent AlO4 tetrahedra, corners with four CuO4 tetrahedra, an edgeedge with one CuO6 octahedra, and edges with five AlO6 octahedra. There are a spread of Al–O bond distances ranging from 1.88–1.98 Å. In the sixth Al3+ site, Al3+ is bonded to four O2- atoms to form AlO4 tetrahedra that share corners with three equivalent CuO6 octahedra and corners with nine AlO6 octahedra. The corner-sharing octahedra tilt angles range from 54–61°. There is three shorter (1.81 Å) and one longer (1.88 Å) Al–O bond length. There are twelve inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted rectangular see-saw-like geometry to two Cu2+ and two equivalent Al3+ atoms. In the second O2- site, O2- is bonded in a distorted trigonal pyramidal geometry to one Cu2+ and three equivalent Al3+ atoms. In the third O2- site, O2- is bonded in a distorted rectangular see-saw-like geometry to two Cu2+ and two equivalent Al3+ atoms. In the fourth O2- site, O2- is bonded in a distorted rectangular see-saw-like geometry to one Cu2+ and three Al3+ atoms. In the fifth O2- site, O2- is bonded in a distorted rectangular see-saw-like geometry to four Al3+ atoms. In the sixth O2- site, O2- is bonded to one Cu2+ and three equivalent Al3+ atoms to form distorted corner-sharing OAl3Cu trigonal pyramids. In the seventh O2- site, O2- is bonded to one Cu2+ and three Al3+ atoms to form a mixture of distorted corner and edge-sharing OAl3Cu tetrahedra. In the eighth O2- site, O2- is bonded to one Cu2+ and three Al3+ atoms to form a mixture of distorted corner and edge-sharing OAl3Cu tetrahedra. In the ninth O2- site, O2- is bonded in a rectangular see-saw-like geometry to four Al3+ atoms. In the tenth O2- site, O2- is bonded to one Cu2+ and three equivalent Al3+ atoms to form a mixture of distorted corner and edge-sharing OAl3Cu trigonal pyramids. In the eleventh O2- site, O2- is bonded in a rectangular see-saw-like geometry to one Cu2+ and three Al3+ atoms. In the twelfth O2- site, O2- is bonded to one Cu2+ and three equivalent Al3+ atoms to form corner-sharing OAl3Cu tetrahedra.

36 MATERIALS SCIENCE↗

Materials Data on Al2FeO4 by Materials Project

FeAl2O4 is Spinel-like structured and crystallizes in the triclinic P1 space group. The structure is three-dimensional. there are six inequivalent Fe2+ sites. In the first Fe2+ site, Fe2+ is bonded to four O2- atoms to form FeO4 tetrahedra that share corners with three equivalent FeO6 octahedra and corners with nine AlO6 octahedra. The corner-sharing octahedra tilt angles range from 55–68°. There are a spread of Fe–O bond distances ranging from 1.96–2.03 Å. In the second Fe2+ site, Fe2+ is bonded to four O2- atoms to form FeO4 tetrahedra that share corners with twelve AlO6 octahedra. The corner-sharing octahedra tilt angles range from 58–61°. There is one shorter (1.99 Å) and three longer (2.00 Å) Fe–O bond length. In the third Fe2+ site, Fe2+ is bonded to four O2- atoms to form FeO4 tetrahedra that share corners with twelve AlO6 octahedra. The corner-sharing octahedra tilt angles range from 58–61°. There are one shorter (2.00 Å) and three longer (2.01 Å) Fe–O bond lengths. In the fourth Fe2+ site, Fe2+ is bonded to four O2- atoms to form FeO4 tetrahedra that share corners with twelve AlO6 octahedra. The corner-sharing octahedra tilt angles range from 59–63°. There are a spread of Fe–O bond distances ranging from 2.01–2.06 Å. In the fifth Fe2+ site, Fe2+ is bonded to four O2- atoms to form FeO4 tetrahedra that share corners with twelve AlO6 octahedra. The corner-sharing octahedra tilt angles range from 59–63°. There are a spread of Fe–O bond distances ranging from 2.00–2.06 Å. In the sixth Fe2+ site, Fe2+ is bonded to six O2- atoms to form FeO6 octahedra that share corners with three equivalent FeO4 tetrahedra, corners with three equivalent AlO4 tetrahedra, and edges with six AlO6 octahedra. There are a spread of Fe–O bond distances ranging from 2.07–2.18 Å. There are twelve inequivalent Al3+ sites. In the first Al3+ site, Al3+ is bonded to six O2- atoms to form AlO6 octahedra that share a cornercorner with one AlO4 tetrahedra, corners with five FeO4 tetrahedra, an edgeedge with one FeO6 octahedra, and edges with five AlO6 octahedra. There are a spread of Al–O bond distances ranging from 1.89–2.07 Å. In the second Al3+ site, Al3+ is bonded to six O2- atoms to form AlO6 octahedra that share corners with six FeO4 tetrahedra and edges with six AlO6 octahedra. There are a spread of Al–O bond distances ranging from 1.92–1.95 Å. In the third Al3+ site, Al3+ is bonded to six O2- atoms to form AlO6 octahedra that share a cornercorner with one AlO4 tetrahedra, corners with five FeO4 tetrahedra, an edgeedge with one FeO6 octahedra, and edges with five AlO6 octahedra. There are a spread of Al–O bond distances ranging from 1.88–2.10 Å. In the fourth Al3+ site, Al3+ is bonded to six O2- atoms to form AlO6 octahedra that share a cornercorner with one AlO4 tetrahedra, corners with five FeO4 tetrahedra, an edgeedge with one FeO6 octahedra, and edges with five AlO6 octahedra. There are a spread of Al–O bond distances ranging from 1.88–2.11 Å. In the fifth Al3+ site, Al3+ is bonded to six O2- atoms to form AlO6 octahedra that share corners with six FeO4 tetrahedra and edges with six AlO6 octahedra. There are a spread of Al–O bond distances ranging from 1.93–1.95 Å. In the sixth Al3+ site, Al3+ is bonded to six O2- atoms to form AlO6 octahedra that share corners with six FeO4 tetrahedra and edges with six AlO6 octahedra. There is four shorter (1.93 Å) and two longer (1.94 Å) Al–O bond length. In the seventh Al3+ site, Al3+ is bonded to six O2- atoms to form AlO6 octahedra that share corners with six FeO4 tetrahedra and edges with six AlO6 octahedra. There is two shorter (1.92 Å) and four longer (1.95 Å) Al–O bond length. In the eighth Al3+ site, Al3+ is bonded to six O2- atoms to form AlO6 octahedra that share corners with two equivalent AlO4 tetrahedra, corners with four FeO4 tetrahedra, an edgeedge with one FeO6 octahedra, and edges with five AlO6 octahedra. There are a spread of Al–O bond distances ranging from 1.92–2.00 Å. In the ninth Al3+ site, Al3+ is bonded to six O2- atoms to form AlO6 octahedra that share corners with six FeO4 tetrahedra and edges with six AlO6 octahedra. There are a spread of Al–O bond distances ranging from 1.92–1.96 Å. In the tenth Al3+ site, Al3+ is bonded to six O2- atoms to form AlO6 octahedra that share corners with two equivalent AlO4 tetrahedra, corners with four FeO4 tetrahedra, an edgeedge with one FeO6 octahedra, and edges with five AlO6 octahedra. There are a spread of Al–O bond distances ranging from 1.92–1.99 Å. In the eleventh Al3+ site, Al3+ is bonded to six O2- atoms to form AlO6 octahedra that share corners with two equivalent AlO4 tetrahedra, corners with four FeO4 tetrahedra, an edgeedge with one FeO6 octahedra, and edges with five AlO6 octahedra. There are a spread of Al–O bond distances ranging from 1.92–2.00 Å. In the twelfth Al3+ site, Al3+ is bonded to four O2- atoms to form AlO4 tetrahedra that share corners with three equivalent FeO6 octahedra and corners with nine AlO6 octahedra. The corner-sharing octahedra tilt angles range from 54–63°. There is three shorter (1.83 Å) and one longer (1.84 Å) Al–O bond length. There are twenty-four inequivalent O2- sites. In the first O2- site, O2- is bonded to two Fe2+ and two Al3+ atoms to form a mixture of distorted edge and corner-sharing OAl2Fe2 trigonal pyramids. In the second O2- site, O2- is bonded to one Fe2+ and three Al3+ atoms to form distorted OAl3Fe trigonal pyramids that share corners with nine OAl3Fe tetrahedra and an edgeedge with one OAl2Fe2 trigonal pyramid. In the third O2- site, O2- is bonded in a distorted rectangular see-saw-like geometry to two Fe2+ and two Al3+ atoms. In the fourth O2- site, O2- is bonded in a distorted rectangular see-saw-like geometry to two Fe2+ and two Al3+ atoms. In the fifth O2- site, O2- is bonded to one Fe2+ and three Al3+ atoms to form distorted OAl3Fe tetrahedra that share corners with six OAl3Fe tetrahedra, corners with three OAl2Fe2 trigonal pyramids, and edges with two OAl3Fe tetrahedra. In the sixth O2- site, O2- is bonded to one Fe2+ and three Al3+ atoms to form a mixture of distorted edge and corner-sharing OAl3Fe tetrahedra. In the seventh O2- site, O2- is bonded to one Fe2+ and three Al3+ atoms to form distorted OAl3Fe tetrahedra that share corners with six OAl3Fe tetrahedra, corners with three OAl2Fe2 trigonal pyramids, and edges with two OAl3Fe tetrahedra. In the eighth O2- site, O2- is bonded to one Fe2+ and three Al3+ atoms to form a mixture of distorted edge and corner-sharing OAl3Fe trigonal pyramids. In the ninth O2- site, O2- is bonded to one Fe2+ and three Al3+ atoms to form a mixture of distorted edge and corner-sharing OAl3Fe tetrahedra. In the tenth O2- site, O2- is bonded in a rectangular see-saw-like geometry to four Al3+ atoms. In the eleventh O2- site, O2- is bonded to one Fe2+ and three Al3+ atoms to form a mixture of distorted edge and corner-sharing OAl3Fe tetrahedra. In the twelfth O2- site, O2- is bonded to one Fe2+ and three Al3+ atoms to form distorted OAl3Fe tetrahedra that share corners with six OAl3Fe tetrahedra, corners with four OAl2Fe2 trigonal pyramids, and edges with two OAl3Fe tetrahedra. In the thirteenth O2- site, O2- is bonded to one Fe2+ and three Al3+ atoms to form a mixture of distorted edge and corner-sharing OAl3Fe tetrahedra. In the fourteenth O2- site, O2- is bonded to one Fe2+ and three Al3+ atoms to form a mixture of distorted edge and corner-sharing OAl3Fe tetrahedra. In the fifteenth O2- site, O2- is bonded to one Fe2+ and three Al3+ atoms to form a mixture of distorted edge and corner-sharing OAl3Fe tetrahedra. In the sixteenth O2- site, O2- is bonded to one Fe2+ and three Al3+ atoms to form a mixture of distorted edge and corner-sharing OAl3Fe tetrahedra. In the seventeenth O2- site, O2- is bonded to one Fe2+ and three Al3+ atoms to form distorted OAl3Fe trigonal pyramids that share corners with three equivalent OAl3Fe tetrahedra, a cornercorner with one OAl2Fe2 trigonal pyramid, and edges with three OAl3Fe tetrahedra. In the eighteenth O2- site, O2- is bonded to one Fe2+ and three Al3+ atoms to form a mixture of distorted edge and corner-sharing OAl3Fe tetrahedra. In the nineteenth O2- site, O2- is bonded to one Fe2+ and three Al3+ atoms to form a mixture of distorted edge and corner-sharing OAl3Fe tetrahedra. In the twentieth O2- site, O2- is bonded to one Fe2+ and three Al3+ atoms to form a mixture of distorted edge and corner-sharing OAl3Fe tetrahedra. In the twenty-first O2- site, O2- is bonded in a rectangular see-saw-like geometry to one Fe2+ and three Al3+ atoms. In the twenty-second O2- site, O2- is bonded in a rectangular see-saw-like geometry to one Fe2+ and three Al3+ atoms. In the twenty-third O2- site, O2- is bonded to one Fe2+ and three Al3+ atoms to form corner-sharing OAl3Fe tetrahedra. In the twenty-fourth O2- site, O2- is bonded in a rectangular see-saw-like geometry to one Fe2+ and three Al3+ atoms.

36 MATERIALS SCIENCE↗