Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “S MATRIX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Influence of Binder in Iron Matrix Composites

The ability to use iron and its alloys as the matrix material in composite systems is of great importance because it is the most widely used metallic material with a variety of commercially available steel grades [1]. The aim of this study is to investigate the influence of binder in particulate iron based metal matrix composites. There are four types of binder that were used in this study; Stearic Acid, Gummi Arabisch, Polyvinyl alcohol 15000 MW and Polyvinyl alcohol 22000 MW. Six different weight percentage of each binder was prepared to produce the composite materials using powder metallurgy (P/M) route; consists of dry mixing, uniaxially compacting at 750 MPa and vacuum sintering at 1100 deg. C for two hours. Their characterization included a study of density, porosity, hardness and microstructure. Results indicate that MMC was affected by the binder and stearic acid as a binder produced better properties of the composite.

36 MATERIALS SCIENCE↗

Third generation biosensing matrix based on Fe-implanted ZnO thin film

Third generation biosensor based on Fe-implanted ZnO (Fe-ZnO) thin film has been demonstrated. Implantation of Fe in rf-sputtered ZnO thin film introduces redox center along with shallow donor level and thereby enhance its electron transfer property. Glucose oxidase (GOx), chosen as model enzyme, has been immobilized on the surface of the matrix. Cyclic voltammetry and photometric assay show that the prepared bioelectrode, GOx/Fe-ZnO/ITO/Glass is sensitive to the glucose concentration with enhanced response of 0.326 {mu}A mM{sup -1} cm{sup -2} and low Km of 2.76 mM. The results show promising application of Fe-implanted ZnO thin film as an attractive matrix for third generation biosensing.

36 MATERIALS SCIENCE↗

Formation of void lattice after annealing of Ge quantum dot lattice in alumina matrix

We report on the formation of a regularly ordered void lattice with a void size of about 4 nm in an alumina matrix. The voids were formed by thermal treatment of a well-ordered three-dimensional Ge quantum dot lattice formed earlier by self-assembled growth in an alumina matrix during magnetron sputtering codeposition of Ge+Al{sub 2}O{sub 3}. During the subsequent annealing the germanium atoms were lost from the film and so voids were produced. The positions of the voids are ordered in the same way as the Ge quantum dots that were present before annealing, while their sizes can be controlled by the deposition parameters.

36 MATERIALS SCIENCE↗

Quantum-statistical T-matrix approach to line broadening of hydrogen in dense plasmas

The electronic self-energy {Sigma}{sup e} is an important input in a quantum-statistical theory for spectral line profile calculations. It describes the influence of plasma electrons on bound state properties. In dense plasmas, the effect of strong, i.e. close, electron-emitter collisions can be considered by three-particle T-matrix diagrams. These digrams are approximated with the help of an effective two-particle T-matrix, which is obtained from convergent close-coupling calculations with Debye screening. A comparison with other theories is carried out for the 2p level of hydrogen at k{sub B}T = 1 eV and n{sub e} = 2{center_dot}10{sup 23} m{sup -3}, and results are given for n{sub e} = 1{center_dot}10{sup 25} m{sup -3}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental Research on Ultrasonic Vibration Milling Metal Matrix Composites SiCp/Al

Although particle reinforced metal matrix composites possess excellent physical properties, its machining performance is rather bad because of its specific structure. It is difficult to obtain good cutting effect by traditional machining method. So machining has become the bottleneck which strictly restricts its industry application. This paper mainly focuses on both wear characteristics of different tool materials and material removal mechanism in ultrasonic milling high volume fraction particle reinforced metal matrix composites SiCp/Al. An acoustic device for ultrasonic vibration milling was developed to introduce the ultrasonic vibration into the traditional machining process. Through the contrast experiment of traditional milling and ultrasonic vibration milling SiCp/Al, the mechanism of tool wear and characteristics of surface topography were analyzed. The experimental results showed that the surface integrity and tool life in the ultrasonic vibration milling SiCp/Al were improved.

36 MATERIALS SCIENCE↗

Laplacians in polar matrix coordinates and radial fermionization in higher dimensions

We consider the quantum mechanical Hamiltonian of two, space indexed, Hermitian matrices. By introducing matrix valued polar coordinates, we obtain the form of the Laplacian acting on invariant states. For potentials depending only on the eigenvalues of the radial matrix, we establish that the radially invariant sector is equivalent to a system of noninteracting 2 + 1 dimensional fermions and obtain its density description. For a larger number of matrices, the presence of a repulsive radial intereigenvalue potential is identified.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The uses of the refined matrix model recursion

We study matrix models in the {beta}-ensemble by building on the refined recursion relation proposed by Chekhov and Eynard. We present explicit results for the first {beta}-deformed corrections in the one-cut and the two-cut cases, as well as two applications to supersymmetric gauge theories: the calculation of superpotentials in N=1 gauge theories, and the calculation of vevs of surface operators in superconformal N=2 theories and their Liouville duals. Finally, we study the {beta}-deformation of the Chern-Simons matrix model. Our results indicate that this model does not provide an appropriate description of the {Omega}-deformed topological string on the resolved conifold, and therefore that the {beta}-deformation might provide a different generalization of topological string theory in toric Calabi-Yau backgrounds.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of Electric Field Alignment of MWCNT in PMMA Matrix for Hydrogen Gas Purification

The composite membranes of multi-walled carbon nanotube (MWCNT) and polymethylmethacrylate (PMMA) were prepared by solution cast method. The MWCNT was dispersing a very low concentration (0.1 wt %) in PMMA matrix. Alignment of MWCNT in PMMA matrix has been performed by inducing a DC electric field at different voltage parameter varying from 350 V/cm to 1250 V/cm. The MWCNT/PMMA composites were characterized by gas permeation and electrical measurement before and after electric field alignment. The effect of electric field alignment has been studied on gas permeation measurements for gas purification applications. These measurements indicate the enhancement in gas permeability due to the aligned of MWCNT in PMMA matix as compare to randomly dispersed MWCNT. I-V characteristics measurement also indicates that aligned MWCNT/PMMA composite membrane exhibits electron tunneling conductivity.

36 MATERIALS SCIENCE↗

Matrix representation of the time operator

In quantum mechanics the time operator {Theta} satisfies the commutation relation [{Theta}, H]=i, and thus it may be thought of as being formally canonically conjugate to the Hamiltonian H. The time operator associated with a given Hamiltonian H is not unique because one can replace {Theta} by {Theta}+{Theta}{sub hom}, where {Theta}{sub hom} satisfies the homogeneous condition [{Theta}{sub hom}, H]= 0. To study this nonuniqueness the matrix elements of {Theta} for the harmonic-oscillator Hamiltonian are calculated in the eigenstate basis. This calculation requires the summation of divergent series, and the summation is accomplished by using zeta-summation techniques. It is shown that by including appropriate homogeneous contributions, the matrix elements of {Theta} simplify dramatically. However, it is still not clear whether there is an optimally simple representation of the time operator.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical characterization of free electron concentration in heteroepitaxial InN layers using Fourier transform infrared spectroscopy and a 2 Multiplication-Sign 2 transfer-matrix algebra

Fourier Transform Infrared (FTIR) reflectance spectroscopy has been implemented as a non-destructive, non-invasive, tool for the optical characterization of a set of c-plane InN single heteroepitaxial layers spanning a wide range of thicknesses (30-2000 nm). The c-plane (0001) InN epilayers were grown by plasma-assisted molecular beam epitaxy (PAMBE) on GaN(0001) buffer layers which had been grown on Al{sub 2}O{sub 3}(0001) substrates. It is shown that for arbitrary multilayers with homogeneous anisotropic layers having their principal axes coincident with the laboratory coordinates, a 2 Multiplication-Sign 2 matrix algebra based on a general transfer-matrix method (GTMM) is adequate to interpret their optical response. Analysis of optical reflectance in the far and mid infrared spectral range has been found capable to discriminate between the bulk, the surface and interface contributions of free carriers in the InN epilayers revealing the existence of electron accumulation layers with carrier concentrations in mid 10{sup 19} cm{sup -3} at both the InN surface and the InN/GaN interface. The spectra could be fitted with a three-layer model, determining the different electron concentration and mobility values of the bulk and of the surface and the interface electron accumulation layers in the InN films. The variation of these values with increasing InN thickness could be also sensitively detected by the optical measurements. The comparison between the optically determined drift mobility and the Hall mobility of the thickest sample reveals a value of r{sub H} = 1.49 for the Hall factor of InN at a carrier concentration of 1.11 Multiplication-Sign 10{sup 19} cm{sup -3} at 300 Degree-Sign {Kappa}.

36 MATERIALS SCIENCE↗

Path integral density matrix dynamics: A method for calculating time-dependent properties in thermal adiabatic and non-adiabatic systems

We introduce a new approach for calculating quantum time-correlation functions and time-dependent expectation values in many-body thermal systems; both electronically adiabatic and non-adiabatic cases can be treated. Our approach uses a path integral simulation to sample an initial thermal density matrix; subsequent evolution of this density matrix is equivalent to solution of the time-dependent Schrödinger equation, which we perform using a linear expansion of Gaussian wavepacket basis functions which evolve according to simple classical-like trajectories. Overall, this methodology represents a formally exact approach for calculating time-dependent quantum properties; by introducing approximations into both the imaginary-time and real-time propagations, this approach can be adapted for complex many-particle systems interacting through arbitrary potentials. We demonstrate this method for the spin Boson model, where we find good agreement with numerically exact calculations. We also discuss future directions of improvement for our approach with a view to improving accuracy and efficiency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Golden-Thompson inequality: Historical aspects and random matrix applications

The Golden-Thompson inequality, Tr (e{sup A+B}) ⩽ Tr (e{sup A}e{sup B}) for A, B Hermitian matrices, appeared in independent works by Golden and Thompson published in 1965. Both of these were motivated by considerations in statistical mechanics. In recent years the Golden-Thompson inequality has found applications to random matrix theory. In this article, we detail some historical aspects relating to Thompson's work, giving in particular a hitherto unpublished proof due to Dyson, and correspondence with Pólya. We show too how the 2 × 2 case relates to hyperbolic geometry, and how the original inequality holds true with the trace operation replaced by any unitarily invariant norm. In relation to the random matrix applications, we review its use in the derivation of concentration type lemmas for sums of random matrices due to Ahlswede-Winter, and Oliveira, generalizing various classical results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Response calculations based on an independent particle system with the exact one-particle density matrix: Polarizabilities

Recently, we have demonstrated that the problems finding a suitable adiabatic approximation in time-dependent one-body reduced density matrix functional theory can be remedied by introducing an additional degree of freedom to describe the system: the phase of the natural orbitals [K. J. H. Giesbertz, O. V. Gritsenko, and E. J. Baerends, Phys. Rev. Lett. 105, 013002 (2010); K. J. H. Giesbertz, O. V. Gritsenko, and E. J. Baerends, J. Chem. Phys. 133, 174119 (2010)]. In this article we will show in detail how the frequency-dependent response equations give the proper static limit (ω → 0), including the perturbation in the chemical potential, which is required in static response theory to ensure the correct number of particles. Additionally we show results for the polarizability for H{sub 2} and compare the performance of two different two-electron functionals: the phase-including Löwdin–Shull functional and the density matrix form of the Löwdin–Shull functional.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The rigorous stochastic matrix multiplication scheme for the calculations of reduced equilibrium density matrices of open multilevel quantum systems

Understanding the roles of the temporary and spatial structures of quantum functional noise in open multilevel quantum molecular systems attracts a lot of theoretical interests. I want to establish a rigorous and general framework for functional quantum noises from the constructive and computational perspectives, i.e., how to generate the random trajectories to reproduce the kernel and path ordering of the influence functional with effective Monte Carlo methods for arbitrary spectral densities. This construction approach aims to unify the existing stochastic models to rigorously describe the temporary and spatial structure of Gaussian quantum noises. In this paper, I review the Euclidean imaginary time influence functional and propose the stochastic matrix multiplication scheme to calculate reduced equilibrium density matrices (REDM). In addition, I review and discuss the Feynman-Vernon influence functional according to the Gaussian quadratic integral, particularly its imaginary part which is critical to the rigorous description of the quantum detailed balance. As a result, I establish the conditions under which the influence functional can be interpreted as the average of exponential functional operator over real-valued Gaussian processes for open multilevel quantum systems. I also show the difference between the local and nonlocal phonons within this framework. With the stochastic matrix multiplication scheme, I compare the normalized REDM with the Boltzmann equilibrium distribution for open multilevel quantum systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Trapping helium in Y{sub 2}Ti{sub 2}O{sub 7} compared to in matrix iron: A first principles study

Pyrochlore Y{sub 2}Ti{sub 2}O{sub 7} is a primary precipitate phase in nano-structured ferritic alloys (NFAs) for fission and fusion energy applications. We report a theoretical study for assessing the relative stability of trapping helium in Y{sub 2}Ti{sub 2}O{sub 7} versus in matrix iron. Various defect structures and the associated energies are examined and compared. Results reveal that helium can be deeply trapped in Y{sub 2}Ti{sub 2}O{sub 7} and that the corresponding self-interaction is essentially repulsive. Transmutant helium in NFAs prefers to occupy individual octa-interstitial sites in Y{sub 2}Ti{sub 2}O{sub 7}, before forming small clusters in Y{sub 2}Ti{sub 2}O{sub 7}. Helium partitioning in NFAs depends on the number and dispersion of Y{sub 2}Ti{sub 2}O{sub 7}; and thus initially, bubble formation and growth in iron matrix can be largely suppressed. Charge transfer occurs from helium to neighboring oxygen anions, but not to neighboring metal cations, suggesting a general effectiveness of trapping helium in oxides. Reasons for the ultimate fate of helium to form small nm-scale interface bubbles are also discussed.

36 MATERIALS SCIENCE↗

Thermal expansion of multiwall carbon nanotube reinforced nanocrystalline silver matrix composite

Multiwall carbon nanotube reinforced silver matrix composite was fabricated by novel molecular level mixing method, which involves nucleation of Ag ions inside carbon nanotube dispersion at the molecular level. As a result the carbon nanotubes get embedded within the powder rather than on the surfaces. Micro structural characterization by X- ray diffraction and scanning electron microscopy reveals that the nanotubes are homogeneously dispersed and anchored within the matrix. The thermal expansion of the composite with the multiwall nanotube content (0, 1.5 vol%) were investigated and it is found that coefficient of thermal expansion decreases with the addition of multiwall nanotube content and reduce to about 63% to that of pure Ag.

36 MATERIALS SCIENCE↗

Cellular morphology of organic-inorganic hybrid foams based on alkali alumino-silicate matrix

Organic-inorganic hybrid foams based on an alkali alumino-silicate matrix were prepared by using different foaming methods. Initially, the synthesis of an inorganic matrix by using aluminosilicate particles, activated through a sodium silicate solution, was performed at room temperature. Subsequently the viscous paste was foamed by using three different methods. In the first method, gaseous hydrogen produced by the oxidization of Si powder in an alkaline media, was used as blowing agent to generate gas bubbles in the paste. In the second method, the porous structure was generated by mixing the paste with a “meringue” type of foam previously prepared by whipping, under vigorous stirring, a water solution containing vegetal proteins as surfactants. In the third method, a combination of these two methods was employed. The foamed systems were consolidated for 24 hours at 40°C and then characterized by FTIR, X-Ray diffraction, scanning electron microscopy (SEM) and compression tests. Low density foams (∼500 Kg/m{sup 3}) with good cellular structure and mechanical properties were obtained by combining the “meringue” approach with the use of the chemical blowing agent based on Si.

36 MATERIALS SCIENCE↗

Analytic matrix elements for the two-electron atomic basis with logarithmic terms

The two-electron problem for the helium-like atoms in S-state is considered. The basis containing the integer powers of ln r, where r is a radial variable of the Fock expansion, is studied. In this basis, the analytic expressions for the matrix elements of the corresponding Hamiltonian are presented. These expressions include only elementary and special functions, what enables very fast and accurate computation of the matrix elements. The decisive contribution of the correct logarithmic terms to the behavior of the two-electron wave function in the vicinity of the triple-coalescence point is reaffirmed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗