Results for “Reserves” — Page 77

NASA NTRSDate not supplied

m:N ConOps/R&R Remote Simulation

This presentation details the experimental design of an investigation of small unmanned aircraft system (sUAS) operations involving multiple vehicle management by a remote operator. The study is part of an ongoing effort to explore multiple vehicle control by multiple operators, i.e., the control of N vehicles by m operators (m:N operations). For this effort, NASA and collaborators have developed prototypes of a concept of operations (ConOps), roles and responsibilities (R&R) for operators and supervisors, and a ground control station (GCS), including software displays and interfaces. Participants in this study acted as the pilot-in-command of twelve aircraft flying pre-approved routes in a simulation of a food delivery operation utilizing sUAS in the San Diego, CA area. Each participant experienced four experimental trials. Twice within the course of each trial, participants were responsible for responding to a sudden, unanticipated, and high-priority contingency: an airspace restriction for sUAS operations known as a UAS Volume Reservation (UVR). Upon issuance of a UVR, pilots were expected to reroute affected vehicles around the airspace. The level of automation (LoA) and workload of the flight rerouting task were varied. The LoA was manipulated by providing reroute suggestions ("auto" condition) for aircraft or by requiring pilots to manually reroute ("manual" condition) affected vehicles. Workload was varied as a function of the number of vehicles affected by the UVR contingencies: 2 vehicles ("low workload" condition) versus 4 vehicles ("high workload" condition). Additionally, some vehicles required pilots to adjust for terrain conflicts while avoiding the UVR region. Due to the COVID-19 pandemic, in-person data collection for this study was not possible. Researchers adapted to this circumstance through the development of remote data collection protocol. Participants were able to view adapted GCS displays using the Microsoft Teams teleconferencing platform and responded to events by using a verbal protocol developed for the experiment. Using this protocol, participants provided instructions for actions to a researcher, referred to as the surrogate, to carry out on their behalf. This presentation describes the experiment design, including special details for remote data collection via a subject-surrogate configuration, and concludes with planned data analysis and results to be presented at a later date.

multi-UAS↗

NASA NTRSDate not supplied

Apatite Nanoresponse to Acidic Dissolution

Phosphorus uptake by plants and organisms is one of the most important life-sustaining processes occurring in the critical zone (CZ). Because 95% of Earth’s reserves is relatively immobile in the form of apatite, plants and organisms rely on molecular scale solubilization process to extract available P. As the world experiences a global P shortage, influencing food production, it becomes increasingly important to understand apatite dissolution. The detailed study of chemically weathered apatite surfaces at the μm to nm-scale is key to understanding P solubilization and uptake in the CZ, allowing for better crop management and efficient fertilization. Apatite weathering is generally viewed in terms of a pH-dependent process where protons weaken atomic bonds, this leading to the disintegration of the apatite structure. A general feature of apatite weathering in acid and near neutral pH conditions is an apparent non-stoichiometric dissolution characterized by [Ca/P]aq > 1.66 in both fluorapatites (FAP) and hydroxyapatites (HAP). This process leads to the formation of a surface altered layer (SAL) with a different composition from the bulk, which many have argued is a Ca-depleted “leached layer.” We investigated apatite weathering at the nanoscale using FIB-prepared TEM-foils. Our preliminary results based on laboratory-altered FAP at ambient T and pH 3 show the formation of amorphous SALs with a maximum thickness of ~10 nm. High resolution chemical mapping and profiling using STEM-EELS and STEM-EDXS indicate that the SALs are generally, but not always, depleted in Ca and enriched in P. These results provide an alternate view of the mechanism of apatite dissolution with stoichiometric breakdown of the apatite structure, followed by the reprecipitation of an amorphous surface layer depleted in Ca. This mechanism can be described in terms of coupled interfacial dissolution-reprecipitation (CIDR), which is increasingly viewed as a universal mechanism of silicate mineral and glass dissolution. Our observation that apatite may dissolve similarly to silicates implies not only that apatite weathering may be more complex than originally thought, but also that the CIDR mechanism may extend beyond silicates.

mineralogy↗

NASA NTRS2020

Monitoring Matang's Mangroves in Peninsular Malaysia through Earth observations: A globally relevant approach

Expansion of rotational timber harvesting of mangroves is set to increase, particularly given greater recognition of the economic, societal and environmental benefits. Generic and standardized procedures for monitoring mangroves are, therefore, needed to ensure their long-term sustainable utilisation. Focusing on the Matang Mangrove Forest Reserve (MMFR), Perak State, Peninsular Malaysia, thematic and continuous environmental descriptors with defined codes or units, including life form, forest age (years), canopy cover (%), above-ground biomass (Mg/ha) and relative amounts of woody debris (%), were retrieved from time-series data from spaceborne optical and single/dual polarimetric and interferometric RADAR. These were then combined for multiple points in time to generate land cover and evidence-based change maps according to the Food and Agriculture Organisation (FAO) Land Cover Classification System (LCCS) and using the framework of the Earth Observation Data for Ecosystem Monitoring (EODESM). Change maps were based on a pre-defined taxonomy, with focus on clear cutting and regrowth. Uncertainties surrounding the land cover and change maps were based on those determined for the environmental descriptors used for their generation and through comparison with independent retrieval from other EO data sources. For the MMFR and also for other mangroves worldwide where harvesting is occurring or being considered, a new approach and opportunity for supporting management of mangroves is presented, which has application for future planning of mangrove resources.

Richard Lucas↗

NASA NTRS2021

Northern Great Plains Disasters: Using Earth Observations to Enhance Flood Monitoring on Tribal Lands in the Northern Great Plains

In 2019, the Great Plains experienced unprecedented catastrophic flooding. Large flood events are predicted to increase in frequency and severity, posing risks to communities in this region, particularly Tribal Nations. We used data from Sentinel-1 C-band Synthetic Aperture Radar (C-SAR), imagery from the Sentinel-2 MultiSpectral Instrument (MSI), and digital elevation models (DEMs) from the Shuttle Radar Topography Mission (SRTM) within Google Earth Engine to map historical floods in the region beginning in 2014 with particular attention to the Rosebud Sioux Reservation and the tribal lands of other Great Plains Tribal Water Alliance members. This historical mapping used C-SAR for a combined method approach with a Z-score algorithm in addition to an index for flooded short vegetation. We also developed a flood risk map by weighting different flood predictor variables according to flood risk literature. These variables included soil drainage from the Soil Survey Geographic Database (SSURGO); elevation, slope, and Topographic Wetness Index (TWI) derived from digital elevation models; precipitation from Climate Hazards Group InfraRed Precipitation with Station data (CHIRPS); land cover from the National Land Cover Database (NLDC); and Normalized Difference Vegetation Index (NDVI) derived from Landsat 8 Operational Land Imager (OLI). From the flood extent and risk maps, we identified widespread flooding in short vegetation (including cropland) and noted flood susceptibility in regions exhibiting high social vulnerability and low community resilience (FEMA indices). We created an ArcGIS Online StoryMap to share project background, results, and data. Additionally, we provided a written tutorial so partners may replicate the flood mapping for future flood events.

Anna Ballasiotes↗

NASA NTRS2021

Data-driven landslide nowcasting at the global scale

Landslides affect nearly every country in the world each year. To better understand this global hazard, the Landslide Hazard Assessment for Situational Awareness (LHASA) model was developed previously. LHASA version 1 combines satellite precipitation estimates with a global landslide susceptibility map to produce a gridded map of potentially hazardous areas from 60° North-South every 3 h. LHASA version 1 categorizes the world’s land surface into three ratings: high, moderate, and low hazard with a single decision tree that first determines if the last seven days of rainfall were intense, then evaluates landslide susceptibility. LHASA version 2 has been developed with a data-driven approach. The global susceptibility map was replaced with a collection of explanatory variables, and two new dynamically varying quantities were added: snow and soil moisture. Along with antecedent rainfall, these variables modulated the response to current daily rainfall. In addition, the Global Landslide Catalog (GLC) was supplemented with several inventories of rainfall-triggered landslide events. These factors were incorporated into the machine-learning framework XGBoost, which was trained to predict the presence or absence of landslides over the period 2015–2018, with the years 2019–2020 reserved for model evaluation. As a result of these improvements, the new global landslide nowcast was twice as likely to predict the occurrence of historical landslides as LHASA version 1, given the same global false positive rate. Furthermore, the shift to probabilistic outputs allows users to directly manage the trade-off between false negatives and false positives, which should make the nowcast useful for a greater variety of geographic settings and applications. In a retrospective analysis, the trained model ran over a global domain for 5 years, and results for LHASA version 1 and version 2 were compared. Due to the importance of rainfall and faults in LHASA version 2, nowcasts would be issued more frequently in some tropical countries, such as Colombia and Papua New Guinea; at the same time, the new version placed less emphasis on arid regions and areas far from the Pacific Rim. LHASA version 2 provides a nearly real-time view of global landslide hazard for a variety of stakeholders.

XGBoos↗

NASA NTRS2021

The Impact and Recovery of Asteroid 2018 LA

The June 2, 2018 impact of asteroid 2018 LA over Botswana is only the second asteroid detected in space prior to impacting over land. Here, we report on the successful recovery of meteorites. Additional astrometric data refine the approach orbit and define the spin period and shape of the asteroid. Video observations of the fireball constrain the asteroid's position in its orbit and were used to triangulate the location of the fireball's main flare over the Central Kalahari Game Reserve. Twenty-three meteorites were recovered. A consortium study of eight of these classifies Motopi Pan as an HED polymict breccia derived from howardite, cumulate and basaltic eucrite, and diogenite lithologies. Before impact, 2018 LA was a solid rock of ~156 cm diameter with high bulk density ~2.85 g cm^(−3), a relatively low albedo pV ~ 0.25, no significant opposition effect on the asteroid brightness, and an impact kinetic energy of ~0.2 kt. The orbit of 2018 LA is consistent with an origin at Vesta (or its Vestoids) and delivery into an Earth-impacting orbit via the ν6 resonance. The impact that ejected 2018 LA in an orbit toward Earth occurred 22.8 ± 3.8 Ma ago. Zircons record a concordant U-Pb age of 4563 ± 11 Ma and a consistent 207Pb/206Pb age of 4563 ± 6 Ma. A much younger Pb-Pb phosphate resetting age of 4234 ± 41 Ma was found. From this impact chronology, we discuss what is the possible source crater of Motopi Pan and the age of Vesta's Veneneia impact basin.

Peter Jenniskens↗

NASA NTRS2021

Microwave Radiometry at Frequencies from 500 to 1400 MHz: An Emerging Technology for Earth Observations

Microwave radiometry has provided valuable spaceborne observations of Earth's geophysical properties for decades. The recent SMOS, Aquarius, and SMAP satellites have demonstrated the value of measurements at 1400 MHz for observing surface soil moisture, sea surface salinity, sea ice thickness, soil freeze/thaw state, and other geophysical variables. However, the information obtained is limited by penetration through the subsurface at 1400 MHz and by a reduced sensitivity to surface salinity in cold or wind-roughened waters. Recent airborne experiments have shown the potential of brightness temperature measurements from 500–1400 MHz to address these limitations by enabling sensing of soil moisture and sea ice thickness to greater depths, sensing of temperature deep within ice sheets, improved sensing of sea salinity in cold waters, and enhanced sensitivity to soil moisture under vegetation canopies. However, the absence of significant spectrum reserved for passive microwave measurements in the 500–1400 MHz band requires both an opportunistic sensing strategy and systems for reducing the impact of radio-frequency interference. Here, we summarize the potential advantages and applications of 500–1400 MHz microwave radiometry for Earth observation and review recent experiments and demonstrations of these concepts. We also describe the remaining questions and challenges to be addressed in advancing to future spaceborne operation of this technology along with recommendations for future research activities.

Microwave radiometry↗

NASA NTRS2021

The Impact and Recovery of Asteroid 2018 LA

The June 2, 2018 impact of asteroid 2018 LA over Botswana is only the second asteroid detected in space prior to impacting over land. Here, we report on the successful recovery of meteorites. Additional astrometric data refine the approach orbit and define the spin period and shape of the asteroid. Video observations of the fireball constrain the asteroid’s position in its orbit and were used to triangulate the location of the fireball’s main flare over the Central Kalahari Game Reserve. Twenty-three meteorites were recovered. A consortium study of eight of these classifies Motopi Pan as an HED polymict breccia derived from howardite, cumulate and basaltic eucrite, and diogenite lithologies. Before impact, 2018 LA was a solid rock of ~156 cm diameter with high bulk density ~2.85 g cm(exp -3), a relatively low albedo p(sub v) ~0.25, no significant opposition effect on the asteroid brightness, and an impact kinetic energy of ~0.2 kt. The orbit of 2018 LA is consistent with an origin at Vesta (or its Vestoids) and delivery into an Earth-impacting orbit via the m6 resonance. The impact that ejected 2018 LA in an orbit toward Earth occurred 22.8 ± 3.8 Ma ago. Zircons record a concordant U-Pb age of 4563 ± 11 Ma and a consistent 207Pb/206Pb age of 4563 ± 6 Ma. A much younger Pb-Pb phosphate resetting age of 4234 ± 41 Ma was found. From this impact chronology, we discuss what is the possible source crater of Motopi Pan and the age of Vesta’s Veneneia impact basin.

Peter Jenniskens↗

NASA NTRS2021

Microwave Radiometry at Frequencies From 500 to 1400 MHz: An Emerging Technology for Earth Observations

Microwave radiometry has provided valuable spaceborne observations of Earth's geophysical properties for decades. The recent SMOS, Aquarius, and SMAP satellites have demonstrated the value of measurements at 1400 MHz for observing surface soil moisture, sea surface salinity, sea ice thickness, soil freeze/thaw state, and other geophysical variables. However, the information obtained is limited by penetration through the subsurface at 1400 MHz and by a reduced sensitivity to surface salinity in cold or wind-roughened waters. Recent airborne experiments have shown the potential of brightness temperature measurements from 500–1400 MHz to address these limitations by enabling sensing of soil moisture and sea ice thickness to greater depths, sensing of temperature deep within ice sheets, improved sensing of sea salinity in cold waters, and enhanced sensitivity to soil moisture under vegetation canopies. However, the absence of significant spectrum reserved for passive microwave measurements in the 500–1400 MHz band requires both an opportunistic sensing strategy and systems for reducing the impact of radio-frequency interference. Here, we summarize the potential advantages and applications of 500–1400 MHz microwave radiometry for Earth observation and review recent experiments and demonstrations of these concepts. We also describe the remaining questions and challenges to be addressed in advancing to future spaceborne operation of this technology along with recommendations for future research activities.

microwave radiometry↗

NASA NTRSDate not supplied

An Overview of the Lunar Water ISRU Measurement Study (LWIMS)

NASA announced plans for the Artemis program, which would send crewed missions to the Moon by 2024 and achieve a sustainable lunar presence by 2028 [1]. To carry out sustained crewed surface operations, In-Situ Resource Utilization (ISRU), which would use lunar resources to produce mission consumables, will be critical. Water-bearing materials have been identified at both lunar poles and are often associated with Permanently Shadowed Regions (PSRs). These constitute a geological resource that may or may not be convertible to reserves with additional exploration. This water could provide both fuel and oxygen for refueling vehicles as well as life support consumables. However, the nature and extent of this resource is not well understood. Detection of water alone is not adequate for ISRU planning. For this reason, NASA chartered the Lunar Water ISRU Measurement Study (LWIMS). The goal of this study was to assess and define the type, amount, and fidelity of the measurements needed to select mining locations for lunar water ISRU and to define resource-related requirements for ISRU hardware development and architectures (mining operations, hardware emplacement, concept of operations).

Julie Kleinhenz↗

NASA NTRSDate not supplied

Internal Architecture of the Common Habitat

The core stage liquid oxygen tank of the Space Launch System can be manufactured as a habitat instead of as a propellant tank, with a common design such that it is equally suitable for use in 0g, 1/6g, 3/8g, 1g, or variable artificial gravity. This Common Habitat can be the central element of a human spaceflight architecture that encompasses the Moon, Mars, and other destinations within the inner solar system. The Common Habitat is specifically used within an alternative architecture study (that is not part of the current NASA baseline) as the core habitation element within a Lunar Basecamp, Mars Basecamp, and the Deep Space Exploration Vehicle. The Common Habitat internal architecture applies a design philosophy to separate crew functions according to deck. The lower deck is reserved for private functions. It includes eight private crew quarters and four waste and hygiene clusters – each with a private waste management compartment, private full body hygiene compartment, and foyer/clothes changing area. The mid deck is primarily allocated to mission-related working functions. It includes an exercise facility, fabrication / maintenance / repair facility, physical science laboratory (physics, geology, and astronomy), and life science laboratory (biology and human research). The mid deck also has four external hatches, clocked one every 90 degrees, centered on the vehicle vertical centerline. Each hatch has a 60-inch tall by 40-inch wide opening with the mid deck floor 16 inches below the bottom lip of the hatch opening. The upper deck is primarily allocated to group or social functions. It includes a large galley, wardroom with projector and display screen, plant growth chambers, bulk stowage, command and control station, medical facility, hygiene compartment, and vehicle subsystems. A Vertical Translation System, based in part on results from a GrabCAD public challenge, enables crew and equipment traverse between habitat decks in 0g, 1/6g, 3/8g, and 1g. A 40-inch by 60-inch vertical translation corridor ensures that anything that can fit through the external hatches can also be moved from deck to deck. The system includes three component systems: a deploying floor to safety barrier system that folds down to become a traversable floor when vertical translation is not in use and deploys to become a safety barrier during vertical translations; a folding ladder that stows in the ceiling when not in use; and an elevator platform that can attach to the ladder for cargo or incapacitated crew member transport. This system is complemented by a Horizontal Translation System, also based in part on the same GrabCAD challenge, provides for horizontal crew translation in microgravity but requires no vehicle reconfiguration for fractional or whole gravity operation. It relies primarily on gecko-inspired grippers, originally developed at Stanford and NASA JPL, attached to footwear to enable crew to emulate walking. Some handrails are also strategically placed throughout the Common Habitat to aid translation in both gravity and microgravity environments.

Common Habitat↗

NASA NTRSDate not supplied

Internal Architecture of the Common Habitat

The core stage liquid oxygen tank of the Space Launch System can be manufactured as a habitat instead of as a propellant tank, with a common design such that it is equally suitable for use in 0g, 1/6g, 3/8g, 1g, or variable artificial gravity. It is capable of sustaining a crew size of eight for missions up to 1200 days in duration. This Common Habitat can be the central element of a human spaceflight architecture that encompasses the Moon, Mars, and other destinations within the inner solar system. Within this archtiecture, the Common Habitat is specifically used as the core habitation element within a Lunar Base Camp, Mars Base Camp, and the Deep Space Exploration Vehicle. The Common Habitat internal architecture applies a design philosophy to separate crew functions according to deck. The lower deck is reserved for private functions. It includes eight private crew quarters and four waste and hygiene clusters – each with a private waste management compartment, private full body hygiene compartment, and private foyer/clothes changing area. The mid deck is primarily allocated to mission-related functions. It includes an exercise facility, fabrication / maintenance / repair facility, physical science laboratory (physics, geology, and remote sensing: astronomy, heliophysics, planetary science, and Earth science), and life science laboratory (biology and human research). The mid deck also has four external hatches, clocked one every 90 degrees, centered on the vehicle vertical centerline. Each hatch has a 60-inch tall by 40-inch wide opening with the mid deck floor 16 inches below the bottom lip of the hatch opening. The upper deck also includes some mission functions, but is primarily allocated to social functions. It includes a large galley, wardroom with projector and display screen, plant growth chambers, bulk stowage, command and control station, medical facility, hygiene compartment, and vehicle subsystems.

Habitability↗

NASA NTRSDate not supplied

Modeled Impacts of LULC and Climate Change Predictions on Water Quality in Belize

Land use and land cover (LULC) change can have detrimental effects on water quality. In Belize, agricultural expansion creates the risk of increased sediment load and excess nutrients in runoff water, while deforestation removes potential infiltration sites for this outflow. Climate change and evolving precipitation rates can intensify the quantity of runoff, further enabling the flow of sediments and excess nutrients out to the lagoon surrounding the Belize Barrier Reef Reserve System (BBRRS). This study estimated future water quality in Belize by projecting LULC change through 2090 across Belize’s major watersheds based on observed trends from 2008-2018. Those LULC projections were subsequently combined with soil type data, elevation, and precipitation rates into a hydrologic model to produce runoff estimates as a proxy for water quality. The two Coupled Model Intercomparison Project phase 6 (CMIP-6) scenarios employed in the study represented bookend climate change scenarios, and both predicted lower precipitation rates in Belize over the next century due to climate change. When holding LULC change constant, these climate scenarios projected a decrease in runoff, suggesting a positive relationship between precipitation and runoff. The southern watersheds in particular are projected to experience greater decreases in annual rainfall and runoff by 2090. When holding climate constant, runoff increased by approximately 2.8% in the Conservation-focused LULC scenario by 2090, which was 28% lower than the Business as Usual scenario and 42% lower than the Development scenario.

water resources↗

NASA NTRS2022

Western Montana Ecological Forecasting II: Enhancing Habitat Suitability Modeling of Mustelid Species and Contaminant Monitoring in Northern Montana Using NASA Earth Observations

Environmental contaminants in aquatic ecosystems threaten both human and ecosystem health. Western Montana’s rivers possess great economic and ecological value, yet the status of contaminants in these systems can be unclear. Contaminants such as brominated flame-retardants, heavy metals, and pharmaceuticals negatively affect ecosystem health by traveling through the food chain and bioaccumulating in apex predators. Exposure to these contaminants can result in neurological, endocrine, and reproductive impairments in wildlife and humans. American mink (Neovison vison) and North American river otter (Lontra canadensis) have a predominantly aquatic diet and serve as reliable indicator species of environmental health. Working Dogs for Conservation (WD4C) uses detection dogs to locate scat samples of these species which are assessed for contaminants by the Virginia Institute of Marine Science (VIMS). With Software for Assisted Habitat Modeling (SAHM), the team generated current (2013-2020) and projected (2021-2040) habitat suitability models for mink and otter utilizing NASA Earth observations from Terra Moderate Resolution Imaging Spectroradiometer (MODIS), Global Precipitation Measurement Integrated Multi-Satellite Retrievals for GPM (GPM IMERG), Shuttle Radar Topography Mission (SRTM), and Soil Moisture Active Passive (SMAP). The habitat suitability maps’ study region encompassed Flathead National Forest and Blackfeet Indian Reservation. Additionally, the team created site accessibility and precipitation anomaly maps that display the viability of survey locations. The current habitat suitability models performed well (AUC-PR=0.88). The most important predictor variables for suitable habitat were distance to rivers, elevation, and land cover. These end products will further inform WD4C survey site selection and contaminant monitoring.

Chelsea Morton↗

NASA NTRS2022

NDARC - NASA Design and Analysis of Rotorcraft: Input and Data Structures - Vol 2

The NDARC code performs design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance analysis, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. Figure 1-1 illustrates the tasks. The principal tasks (sizing, mission analysis, flight performance analysis) are shown in the figure as boxes with heavy borders. Heavy arrows show control of subordinate tasks. The aircraft description (figure 1-1) consists of all the information, input and derived, that defines the aircraft. The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. This information can be the result of the sizing task; can come entirely from input, for a fixed model; or can come from the sizing task in a previous case or previous job. The aircraft description information is available to all tasks and all solutions (indicated by light arrows). The sizing task determines the dimensions, power, and weight of a rotorcraft that can perform a specified set of design conditions and missions. The aircraft size is characterized by parameters such as design gross weight, weight empty, rotor radius, and engine power available. The relations between dimensions, power, and weight generally require an iterative solution. From the design flight conditions and missions, the task can determine the total engine power or the rotor radius (or both power and radius can be fixed), as well as the design gross weight, maximum takeoff weight, drive system torque limit, and fuel tank capacity. For each propulsion group, the engine power or the rotor radius can be sized. Missions are defined for the sizing task, and for the mission performance analysis. A mission consists of a number of mission segments, for which time, distance, and fuel burn are evaluated. For the sizing task, certain missions are designated to be used for design gross weight calculations; for transmission sizing; and for fuel tank sizing. The mission parameters include mission takeoff gross weight and useful load. For specified takeoff fuel weight with adjustable segments, the mission time or distance is adjusted so the fuel required for the mission (burned plus reserve) equals the takeoff fuel weight. The mission iteration is on fuel weight or energy. Flight conditions are specified for the sizing task, and for the flight performance analysis. For the sizing task, certain flight conditions are designated to be used for design gross weight calculations; for transmission sizing; for maximum takeoff weight calculations; and for antitorque or auxiliary thrust rotor sizing. The flight condition parameters include gross weight and useful load. For flight conditions and mission takeoff, the gross weight can be maximized, such that the power required equals the power available. A flight state is defined for each mission segment and each flight condition. The aircraft performance can be analyzed for the specified state, or a maximum effort performance can be identified. The maximum effort is specified in terms of a quantity such as best endurance or best range, and a variable such as speed, rate of climb, or altitude. The aircraft must be trimmed, by solving for the controls and motion that produce equilibrium in the specified flight state. Different trim solution definitions are required for various flight states. Evaluating the rotor hub forces may require solution of the blade flap equations of motion.

NDARC↗

NASA NTRS2022

NDARC - NASA Design and Analysis of Rotorcraft: Input - Vol 3

The NDARC code performs design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance analysis, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. Figure 1-1 illustrates the tasks. The principal tasks (sizing, mission analysis, flight performance analysis) are shown in the figure as boxes with heavy borders. Heavy arrows show control of subordinate tasks. The aircraft description (figure 1-1) consists of all the information, input and derived, that defines the aircraft. The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. This information can be the result of the sizing task; can come entirely from input, for a fixed model; or can come from the sizing task in a previous case or previous job. The aircraft description information is available to all tasks and all solutions (indicated by light arrows). The sizing task determines the dimensions, power, and weight of a rotorcraft that can perform a specified set of design conditions and missions. The aircraft size is characterized by parameters such as design gross weight, weight empty, rotor radius, and engine power available. The relations between dimensions, power, and weight generally require an iterative solution. From the design flight conditions and missions, the task can determine the total engine power or the rotor radius (or both power and radius can be fixed), as well as the design gross weight, maximum takeoff weight, drive system torque limit, and fuel tank capacity. For each propulsion group, the engine power or the rotor radius can be sized. Missions are defined for the sizing task, and for the mission performance analysis. A mission consists of a number of mission segments, for which time, distance, and fuel burn are evaluated. For the sizing task, certain missions are designated to be used for design gross weight calculations; for transmission sizing; and for fuel tank sizing. The mission parameters include mission takeoff gross weight and useful load. For specified takeoff fuel weight with adjustable segments, the mission time or distance is adjusted so the fuel required for the mission (burned plus reserve) equals the takeoff fuel weight. The mission iteration is on fuel weight or energy. Flight conditions are specified for the sizing task, and for the flight performance analysis. For the sizing task, certain flight conditions are designated to be used for design gross weight calculations; for transmission sizing; for maximum takeoff weight calculations; and for antitorque or auxiliary thrust rotor sizing. The flight condition parameters include gross weight and useful load. For flight conditions and mission takeoff, the gross weight can be maximized, such that the power required equals the power available. A flight state is defined for each mission segment and each flight condition. The aircraft performance can be analyzed for the specified state, or a maximum effort performance can be identified. The maximum effort is specified in terms of a quantity such as best endurance or best range, and a variable such as speed, rate of climb, or altitude. The aircraft must be trimmed, by solving for the controls and motion that produce equilibrium in the specified flight state. Different trim solution definitions are required for various flight states. Evaluating the rotor hub forces may require solution of the blade flap equations of motion.

NDARC↗

NASA NTRS2021

On-demand Command and Control of ASTERIA with Cloud-based Ground Station Services

ASTERIA (Arcsecond Space Telescope Enabling Research in Astrophysics) was a 6-unit CubeSat technology demonstration mission that deployed from the International Space Station on November 20th, 2017. After successfully completing its 90-day primary mission that demonstrated arcsecond-level line-of-sight pointing and focal plane thermal stability for exoplanet detection, it entered an extended mission performing onboard software demonstrations to mature technology both in space and on the ground. One of the technologies was a completely cloud-based ground system leveraging Amazon Web Services (AWS) Ground Station service.Announced in December 2018 and launched in May 2019, AWS Ground Station is a fully managed ground station service that aims to reduce the overhead associated with developing and maintaining ground system infrastructure throughout the mission lifecycle. AWS Ground Station makes available the suite of features required for any ground system in support of low-Earth orbit (LEO) and medium-Earth Orbit (MEO) satellite operations on-demand and without setting up or maintaining long-term contracts. Charges are incurred on a per-minute basis for antenna usage during scheduled tracks. Support is available for S-band uplink and downlink, along with X-band narrowband and wideband downlink. Missions that use the service may reserve tracks with any licensed AWS Ground Station antennas located across each service region and have direct access to any AWS services in support of mission operations.The cloud-based architecture built around the AWS Ground Station service greatly enhanced ASTERIA mission operations by enabling end-to-end pass automation, on-demand contact scheduling and contingency planning, along with more efficient data downlink through station availability and station-to-station handovers. It incorporated open-source software, particularly NASA's AMMOS Instrument Toolkit (AIT) and Open Mission Control Technologies (OpenMCT), along with the AWS application programming interfaces (API) to the Ground Station, Elastic Compute Cloud (EC2) and Simple Storage Service (S3) services. After showcasing operability in August 2019, the team continued using and improving this novel ground system architecture until the end of mission in December 2019. This paper describes the cloud-based ground system, how it was designed, tested, and evaluated with an in-orbit spacecraft, the operational capabilities that it enabled, along with lessons learned and recommendations for future missions.

Fesq, Lorraine↗

NASA NTRS2021

On-demand Command and Control of ASTERIA with Cloud-based Ground Station Services

ASTERIA (Arcsecond Space Telescope Enabling Research in Astrophysics) was a 6-unit CubeSat technology demonstration mission that deployed from the International Space Station on November 20th, 2017. After successfully completing its 90-day primary mission that demonstrated arcsecond-level line-of-sight pointing and focal plane thermal stability for exoplanet detection, it entered an extended mission performing onboard software demonstrations to mature technology both in space and on the ground. One of the technologies was a completely cloud-based ground system leveraging Amazon Web Services (AWS) Ground Station service. Announced in December 2018 and launched in May 2019, AWS Ground Station is a fully managed ground station service that aims to reduce the overhead associated with developing and maintaining ground system infrastructure throughout the mission lifecycle. AWS Ground Station makes available the suite of features required for any ground system in support of low-Earth orbit (LEO) and medium-Earth Orbit (MEO) satellite operations on-demand and without setting up or maintaining long-term contracts. Charges are incurred on a per-minute basis for antenna usage during scheduled tracks. Support is available for S-band uplink and downlink, along with X-band narrowband and wideband downlink. Missions that use the service may reserve tracks with any licensed AWS Ground Station antennas located across each service region and have direct access to any AWS services in support of mission operations. The cloud-based architecture built around the AWS Ground Station service greatly enhanced ASTERIA mission operations by enabling end-to-end pass automation, on-demand contact scheduling and contingency planning, along with more efficient data downlink through station availability and station-tostation handovers. It incorporated open-source software, particularly NASA's AMMOS Instrument Toolkit (AIT) and Open Mission Control Technologies (OpenMCT), along with the AWS application programming interfaces (API) to the Ground Station, Elastic Compute Cloud (EC2) and Simple Storage Service (S3) services. After showcasing operability in August 2019, the team continued using and improving this novel ground system architecture until the end of mission in December 2019. This paper describes the cloud-based ground system, how it was designed, tested, and evaluated with an inorbit spacecraft, the operational capabilities that it enabled, along with lessons learned and recommendations for future missions.

Fesq, Lorraine↗