Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RECYCLABLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Zirconium Recycle Test Equipment for Hot Cell Operations

The equipment components and assembly support work were modified for optimized, remote hot cell operations to complete this milestone. The modifications include installation of a charging door, Swagelok connector for the off-gas line between the reactor and condenser, and slide valve installation to permit attachment/replacement of the product salt collector bottle.

42 ENGINEERING↗

Developing Characterization Procedures for Qualifying both Novel Selective Laser Sintering Polymer Powders and Recycled Powders

Selective laser sintering (SLS) is an additive technique which is showing great promise over conventional manufacturing techniques. SLS requires certain key material properties for a polymer powder to be successfully processed into an end-use part, and therefore limited selection of materials are available. Furthermore, there has been evidence of a powder’s quality deteriorating following each SLS processing cycle. The current investigation serves to build a path forward in identifying new SLS powder materials by developing characterization procedures for identifying key material properties as well as for detecting changes in a powder’s quality. Thermogravimetric analyses, differential scanning calorimetry, and bulk density measurements were investigated.

36 MATERIALS SCIENCE↗

Storm Water Pollution Prevention Plan TA-60 Material Recycling Facility

This Storm Water Pollution Prevention Plan (SWPPP) was developed in accordance with the provisions of the Clean Water Act (33 U.S.C. §§1251 et seq., as amended), and the Multi-Sector General Permit for Storm Water Discharges Associated with Industrial Activity (U.S. EPA, June 2015) issued by the U.S. Environmental Protection Agency (EPA) for the National Pollutant Discharge Elimination System (NPDES) and using the industry specific permit requirements for Sector P-Land Transportation and Warehousing as a guide. The applicable stormwater discharge permit is EPA General Permit Registration Number NMR053915 (Los Alamos National Security (LANS) (U.S. EPA, June 2015).

54 ENVIRONMENTAL SCIENCES↗

EverBatt: A Closed-loop Battery Recycling Cost and Environmental Impacts Model

The cumulative global electric vehicle (EV) sales surpassed 3.1 million units in 2017, with 1.9 million units of battery electric vehicles (BEVs), and 1.2 million units of plug-in hybrid electric vehicles (PHEVs). Of the cumulative global EV sales, The U.S. accounted for 0.40 million BEV sales, and 0.36 million PHEV sales (IEA 2018). Assuming a lifespan of 10 years for EVs, an average battery pack weight of 300 kg for BEVs, and an average battery pack weight of 200 kg for PHEVs, by 2027, 0.2 million metric tons of EV batteries would reach their end-oflife (EOL) in the U.S. Globally, the volume of spent automotive batteries would amount to 0.8 million metric tons by 2027. As the annual global EV sales are expected to grow from 1.4 million in 2017 to 21.5 million in 2030 (IEA 2018), the volume of spent automotive batteries would increase markedly beyond 2027.

25 ENERGY STORAGE↗

Recycling Isotopically Enriched Mo from the RadioGenix Waste Stream

NorthStar’s RadioGenix generator utilizes an aqueous biphasic extraction chromatography column to separate Tc from low-specific-activity 99 Mo. During this separation process, a fraction of the source Mo material can be found in the waste. This is not of concern when natural Mo targets are used. However, the introduction of isotopically enriched 98 Mo for neutron capture or 100 Mo for accelerator-based production requires recovery of this valuable enriched Mo material. The generator waste is absorbed and solidified in a superabsorbent hydrogel polymer. In this contribution, we report results from our small-scale experimental study on development of a separation process for recovery of molybdenum from the polymeric gel waste using common chemicals and simple chemical techniques. Our investigation confirms that the acidic deswelling of the alkaline hydrogel with concentrated hydrochloric acid converts the occluded molybdate to a neutral molybdenyl dichloride species that is freely released from the gel. Mo can then be concentrated on a commercial tri-n-butyl phosphate resin, eluted with ammonium hydroxide, and crystallized as ammonium heptamolybdate for conversion back to Mo metal. Typical Mo recoveries are 90-95%.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Efficient Isotope Recovery and Seamless Recycle of Target Material in a Salt Matrix

A first step in developing molten salt nuclear reactors (MSRs) is a capability to irradiate capsules containing molten salts and a natural development path for this capability is through applications to produce radioisotopes using a molten salt matrix within existing water-cooled reactors. At present there is almost no capability to prepare, irradiate, and process salts for isotope production in the United States. This report documents an initial plan to discover designs for capsules to produce various radioisotopes ( 99 Mo, 238 Pu, 232 U, and heavy elements) in a way that minimizes waste, simplifies (or really eliminates the need for) recycle/refabrication operations by utilizing a salt matrix for irradiation and nonaqueous, aqueous, or hybrid processes for recovery of the isotopes from the salt matrix. The FY19 goals of this internal study are to: (1) Review past and current salt irradiation vehicle designs and evaluate modern materials, fabrication methods, and design methods to see how new vehicles could function for isotope production in the context of optimized nonaqueous or hybrid recovery methods.(2) engage potential end-users with this approach and gather feedback and provide recommendations for a phased implementation for different application/isotope domains. Oak Ridge National Laboratory (ORNL) staff have developed a unique understanding and capability with regard to molten salts and related pyro-processing methods. This capability can be sustained by passing it on to a new generation by tackling a challenging problem and putting the solution into practice. This study defines opportunities to start down that path.

07 ISOTOPE AND RADIATION SOURCES↗

Small-Scale Recycling of Irradiated Uranium and Transuranic Elements (Np, Pu) Using 3D-Printed Centrifugal Contactors

Niowave’s technology employs super-conducting linear accelerators to induce fission on low-enriched uranium targets followed by subsequent radiochemical processing to purify 99 Mo as well as a number of other fission products. Argonne’s Radiochemistry group (CFCT), in partnership with Niowave and UNLV, will be managing the TCF project to develop a closed-cycle loop for Niowave’s uranium targets. The roles of the DOE national laboratory partner will be to 1) develop a basic chemical understanding of the separations and purifications required to meet industry standards, 2) initiate the additive manufacturing (AM) of the centrifugal contactors, 3) develop a process flowsheet using Argonne computer codes.

43 PARTICLE ACCELERATORS↗

Fully Recyclable Advanced Composites with Reduced Cure Times for Improved Manufacturing Efficiency

At Cyclotron Road, the participant team from Mallinda focused its research efforts on developing its Polyimine chemistry for commercial applications. The value-differentiating characteristics of the technology are predicated on the chemical reversibility of the system which opens the door for a number of industrial applications. In short, the company’s technology is a highly crosslinked thermoset polymer network that can exchange covalent bonds within the polymer matrix when the polymer is heated to the glass transition temperature of the material. This leads to a resin system that can alternate between rigid and semi-rigid states; allowing for compression molding, and surface welding of thermosetting composite materials made with polyimine polymers. This research project worked towards improving the thermal properties of its resin from 80 °C to over 260 °C. The improved properties of Mallinda’s resin unlocks development potential within the automotive and aerospace markets where advance composite materials require stringent performance requirements and elevated operating temperatures.

36 MATERIALS SCIENCE↗

Testing molecules that disperse biofilms and biofouling and improve water recycling energy efficiency

In collaboration with Aequor, Inc, ABPDU researchers have evaluated a number of antibiofouling compounds for biofilm reduction potential in biomanufacturing applications. In addition to verifying their efficacy as dispersants, studies with bacteria, fungi, and algae indicate compatibility with canonical industrial host organisms. In addition, these molecules were found to significantly enhance growth rates of heterotrophic algae, indicating potential applications in algal cultivations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Modeling the Destruction of Glycolate in the Defense Waste Processing Facility (DWPF) Recycle Stream and Concentration Factors for Glycolate in the 2H Evaporator

Two models were developed to predict maximum glycolate concentrations in the Savannah River Site (SRS) Concentration, Storage, and Transfer Facility (CSTF) from implementation of the Nitric-Glycolic flowsheet at the Defense Waste Processing Facility (DWPF). One model describes the kinetics of glycolate destruction via chemical oxidation with sodium permanganate. This model conservatively predicts glycolate concentration delivered to the CSTF with a high probability the actual glycolate concentration is lower than predicted. The second model describes the potential concentration of said residual glycolate within the 242-16H (i.e., “2H”) Evaporator system.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Thermal quench of open field plasma intercepting with recycling walls

When a fusion plasma suddenly intercepts a solid surface (wall or pellet), thermal collapse is distinctly kinetic & has novel physics. VPIC simulations & theory revealed the fascinating dynamics of four propagating fronts controlling parallel electron temperature cooling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Low-Cost Recyclable Oxygen Carrier and Novel Process for Chemical Looping Combustion

The University of North Dakota, through its Institute for Energy Studies and Energy & Environmental Research Center, partnered with Envergex LLC, Barr Engineering and Microbeam Technologies to develop a transformational enabling technology for advancement of Chemical Looping Combustion technology. Industrial support was provided by Carbontec Energy Corporation. The project targeted the two biggest challenges to chemical looping combustion: (1) High costs of oxygen carrier replacement/loss due to expensive manufacturing and high replacement rates from physical attrition and/or decrease in reactivity, and (2) Inherently slow fuel char conversion which represents the rate-limiting step for chemical looping combustion and results in very large equipment sizes, and overall lower carbon dioxide capture efficiency. The project activities were addressed in a series of seven tasks. Task 1 extended throughout the entire project and oversaw project management and execution. Task 2 and 3 focused on development and evaluation of the novel oxygen carrier. Task 4 to 7 focused on design of the novel reactor, testing with the novel oxygen carrier and a techno-economic assessment of the process. The list of tasks are: Task 1 – Project management and planning, Task 2 – Laboratory scale oxygen carrier manufacturing and assessment, Task 3 – Modeling and laboratory-scale evaluation of oxygen carrier performance with coal, Task 4 – 10-kilowatt thermal integrated system installation, Task 5 – Scaled-up oxygen carrier manufacturing, Task 6 – 10-kilowatt testing, and Task 7 – Process design and techno-economic analysis.

01 COAL, LIGNITE, AND PEAT↗