Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Deposition Of Materials Using A Simple Planar Coil Radio Frequency Inductively Coupled Plasma System

A planar coil RF inductively coupled plasma (PC-RFICP) systems is set up for the purpose of thin film deposition. The system is powered by a 13.56 MHz, 550 W, 50 OMEGA RF generator. The RF power is transferred to the plasma via a planar induction coil. The impedance matching unit consists of an air core step-down transformer and a tunable vacuum capacitor. This system is used for the plasma enhanced chemical vapor deposition (PECVD) of diamond-like carbon (DLC) film on silicon substrate, and hydrogenated amorphous carbon (a-C:H) film.

36 MATERIALS SCIENCE↗

Enhanced Raman scattering by spatially distributed atomic coherence

We demonstrate experimentally an enhancement in Raman scattering in Rb atomic vapor due to the atomic coherence initially prepared by a weak write laser. We find that the enhanced Raman scattering depends on the spatial distribution of the atomic spin coherence and can be explained with a simple picture of three-wave mixing. This effect can in principle be used to have a light conversion efficiency near unity in Raman process. Such an enhanced Raman scattering may have practical applications in quantum information, nonlinear optics, and laser spectroscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Graphitic carbon growth on Si(111) using solid source molecular beam epitaxy

Solid source molecular beam epitaxy is used to explore the growth of carbon films directly on Si(111). It is shown that graphitic carbon is grown by the implementation of a thin amorphous carbon film that suppresses the formation of SiC precipitates. Raman scattering measurements show the D and G vibrational phonon modes, indicating graphitic ordering in the carbon film. X-ray photoelectron spectroscopy is used to verify the formation of sp2 bonds in the graphitic carbon films and confirms the suppression of SiC.

36 MATERIALS SCIENCE↗

Monolayer graphene growth on sputtered thin film platinum

It is demonstrated that sputtered thin film platinum (Pt) can be used as a catalytic metal for graphene growth on metal. During the crystallization annealing, the sputtered Pt is crystallized mostly into Pt (111) orientation, maintaining excellent surface roughness with no sign of agglomeration. The relatively lower carbon solubility in Pt and the good surface roughness of the thin film Pt enable us to form a uniform monolayer graphene on Pt over the entire region of the thin film Pt/SiO{sub 2}/Si substrate by carbon dissolution and segregation method processed in a methane ambient. The monolayer graphene grown on Pt has been successfully transferred to SiO{sub 2}/Si substrate by simple wet etching of Pt. The results of Raman spectroscopic and scanning tunneling microscopic measurements of the synthesized graphene layer are presented.

36 MATERIALS SCIENCE↗

Substrate doping effects on Raman spectrum of epitaxial graphene on SiC

In this paper, we reported a Raman scattering study of epitaxial graphene on different doped 6H-SiC (0001) substrates and investigated the substrate induced charge-transfer doping to the epitaxial graphene. We found that the charge carrier type and concentration of epitaxial graphene can be altered by SiC substrates with different doping level and doping type. This effect is comparable to that obtained by electrochemical doping. As Raman scattering is very sensitive to the doping level, the charge carrier concentration of epitaxial graphene can be estimated by the Raman G-peak shift. Our results are fundamental and may have implications for future epitaxial-graphene-based micro/nanoelectronic devices.

36 MATERIALS SCIENCE↗

Phononic Molecules Studied by Raman Scattering

An acoustic nanocavity can confine phonons in such a way that they act like electrons in an atom. By combining two of these phononic-atoms, it is possible to form a phononic 'molecule', with acoustic modes that are similar to the electronic states in a hydrogen molecule. We report Raman scattering experiments performed in a monolithic structure formed by a phononic molecule embedded in an optical cavity. The acoustic mode splitting becomes evident through both the amplification and change of selection rules induced by the optical cavity confinement. The results are in perfect agreement with photoelastic model simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Suppression of Landau damping via electron band gap

The pondermotive potential in the x-ray Raman compression can generate an electron band gap, which suppresses the Landau damping. The regime is identified where a Langmuir wave can be driven without damping in the stimulated Raman compression. It is shown that the partial wave breaking and the frequency detuning due to the trapped particles would be greatly reduced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Energy and charge transfers between (Bu{sub 4}N){sub 2}(Ru)(dcbpyH){sub 2}(NCS){sub 2} (N719) and ZnO thin films

ZnO thin films and (Bu{sub 4}N){sub 2}(Ru)(dcbpyH){sub 2}(NCS){sub 2} (called N719) sensitized ZnO thin films are grown on fluorine-doped tin oxide (FTO) conducting glass substrates using laser molecular beam epitaxy. Ultraviolet-visible absorption, photoluminescence (PL), surface photovoltage spectroscopy, and Raman scattering are employed to probe into the transition process of photogenerated charges and the interaction between ZnO and N719. The experimental results indicate that there is a significant electronic interaction between N719 and ZnO through chemiadsorption. The interaction greatly enhances the photogenerated charge separation and thus the photovoltaic response of the ZnO film but remarkedly weakens its radiative recombination, i.e., PL, implying strong energy and charge transfer occurring between N719 and ZnO. In addition, a new PL peak observed at about 720 nm in N719 sensitized ZnO/FTO is attributed to the electron-hole recombination of N719.

36 MATERIALS SCIENCE↗

Investigation of the Effects of MIR-FELIrradiation on the Photoluminescence of Titanium Dioxides

A mid-infrared free electron laser (MIR-FEL: 5 {mu}m-20 {mu}m) facility (KU-FEL: Kyoto University Free Electron Laser) has been constructed in Institute of Advanced Energy Kyoto University, and first laser saturation at 13.2 {mu}m was achieved in May 2008. Currently, we have started to develop the application of MIR-FEL in the field of energy and material science. This study aimed at investigating the feasibility for the development of new evaluation technique of electron-phonon interaction in metal oxides by MIR-FEL. A preliminary result of electrical and optical properties of titanium dioxides was presented.

36 MATERIALS SCIENCE↗

Structural and optoelectronic properties of germanium-rich islands grown on silicon using molecular beam epitaxy

We report on the structural and optoelectronic properties of self-assembled germanium-rich islands grown on silicon using molecular beam epitaxy. Raman, photocurrent, photoluminescence, and transient optical spectroscopy measurements suggest significant built-in strains and a well-defined interface with little intermixing between the islands and the silicon. The shape of these islands depends on the growth conditions and includes pyramid, dome, barn-shaped, and superdome islands. Most importantly, we demonstrate that these germanium-rich islands provide efficient light emission at telecommunication wavelengths on a complementary metal-oxide semiconductor-compatible platform.

36 MATERIALS SCIENCE↗

Absolute calibration of LIDAR Thomson scattering systems by rotational Raman scattering

Absolute calibration of LIDAR Thomson scattering systems on large fusion devices may be achieved using rotational Raman scattering. The choice of calibrating gas molecule presents different options and design trade-offs and is likely to be strongly dependent on the laser wavelength selected. Raman scattering of hydrogenic molecules produces a very broad spectrum, however, with far fewer scattered photons than scattering from nitrogen or oxygen at the same gas pressure. Lower laser wavelengths have the advantage that the Raman cross section increases, {sigma}{sub Raman}{proportional_to}1/{lambda}{sub 0}{sup 4}, but the disadvantage that the spectral width of the scattered spectrum decreases, {Delta}{lambda}{sub Raman}{proportional_to}{lambda}{sub 0}{sup 2}. This narrower spectrum makes measurement closer to the laser wavelength necessary. The design of the calibration technique presents a number of challenges. Some of these challenges are generic to all Thomson scattering systems. These include detecting a sufficient number of photoelectrons and designing filters that measure close to the laser wavelength while simultaneously achieving adequate blocking of the laser wavelength. An issue specific to LIDAR systems arises since the collection optics operates over a wide range of depth of field. This wide depth of field has the effect of changing the angle of light incident on the optical interference filter with plasma major radius. The angular distribution then determines the effective spectral transmission function of the interference filter and hence impacts on the accuracy of the absolute calibration. One method that can be used to increase absolute calibration accuracy is collecting both Stokes and anti-Stokes lines with optical filter transmission bands specifically designed to reduce systematic uncertainty.

43 PARTICLE ACCELERATORS↗

Properties of nitrogen implanted and electron beam annealed bulk ZnO

The optical properties of bulk ZnO ion implanted with nitrogen ions, at an energy of 23 keV have been studied as a function of implantation fluence and electron beam (EB) annealing conditions. Nuclear reaction analysis and Raman results have revealed the implanted N concentration and its structural changes with respect to various nitrogen ion fluences. The optical properties of nitrogen implanted bulk ZnO were investigated by low temperature photoluminescence measurements. An enhanced peak at 3.235 eV has been attributed to donor-accepter pair (DAP) emission involving the implanted N acceptor in ZnO. The emission near 3.3085 eV is attributed to a free electron to acceptor transition. We also report a broad band emission feature at {approx}3.09 eV in the nitrogen implanted with 1-2x10{sup 15} ions cm{sup -2} and EB annealed at 800-900 deg. C. This is assigned to a thermally activated nitrogen acceptor transition as it is unique only to nitrogen implanted samples. An ionization energy of 377 meV indicates that this line may correspond to a significantly less shallow acceptor level. In addition an increase in the intensity and dominance of this DAP line in nitrogen implanted samples over the other acceptor transitions was observed with increasing annealing time and temperatures. It is shown that EB annealing offers a method of enhanced nitrogen activation when compared to a more conventional furnace approach.

36 MATERIALS SCIENCE↗

Incorporation of the dopants Si and Be into GaAs nanowires

We studied the doping with Si and Be of GaAs nanowires (NWRs) grown by molecular beam epitaxy. Regarding the NW morphology, no influence was observed for Si doping but high Be doping concentrations cause a kinking and tapering of the NWRs. We investigated local vibrational modes by means of resonant Raman scattering to determine the incorporation sites of the dopant atoms. For Si doping, both donors on Ga sites and acceptors on As sites have been observed. Be was found to be incorporated as an acceptor on Ga sites. However, at high doping concentration, Be is also incorporated on interstitial sites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

On the assessment of hydroxyapatite fluoridation by means of Raman scattering

Hydroxyapatite is the main mineral component of bones and teeth. Fluorapatite, a bioceramic that can be obtained from hydroxyapatite by chemical substitution of the hydroxide ions with fluoride, exhibits lower mineral solubility and larger mechanical strength. Despite the widespread use of fluoride against caries, a reliable technique for unambiguous assessment of fluoridation in in vitro tests is still lacking. Here we present a method to probe fluorapatite formation in fluoridated hydroxyapatite by combining Raman scattering with thermal annealing. In synthetic minerals, we found that effectively fluoride substituted hydroxyapatite transforms into fluorapatite only after heat treatment, due to the high activation energy for this first order phase transition.

36 MATERIALS SCIENCE↗

Remarkable enhancement in crystalline perfection, second harmonic generation efficiency, optical transparency, and laser damage threshold in potassium dihydrogen phosphate crystals by L-threonine doping

Effect of L-threonine (LT) doping on crystalline perfection, second harmonic generation (SHG) efficiency, optical transparency, and laser damage threshold (LDT) in potassium dihydrogen phosphate (KDP) crystals grown by slow evaporation solution technique (SEST) has been investigated. The influence of doping on growth rate and morphology of the grown crystals has also been studied. Powder x-ray diffraction data confirms the crystal structure of KDP and shows a systematic variation in intensity of diffraction peaks in correlation with morphology due to varying LT concentration. No extra phase formation was observed which is further confirmed by Fourier transform Raman (FT-Raman) studies. High-resolution x-ray diffraction curves indicate that crystalline perfection has been improved to a great extent at low concentrations with a maximum perfection at 1 mol % doping. At higher concentrations (5 to 10 mol %), it is slightly reduced due to excess incorporation of dopants at the interstitial sites of the crystalline matrix. LDT has been increased considerably with increase in doping concentration, whereas SHG efficiency was found to be maximum at 1 mol % in correlation with crystalline. The optical transparency for doped crystals has been increased as compared to that of pure KDP with a maximum value at 1 mol % doping.

36 MATERIALS SCIENCE↗

A KB-Focusing Mirror Pair for a VUV-Raman Spectrometer at FLASH - Mirror Metrology and Ray Tracing Results

A plane mirror and two strongly curved plane elliptical mirrors comprising the refocusing system downstream the plane grating monochromator at FLASH in DESY have been characterized with the Nanometer Optical Component Measuring Machine at the BESSY-II Optics Laboratory of the Helmholtz Zentrum Berlin. Based on the measurement results the two elliptical cylinders were optimized by deterministic surface finishing technology (Ion Beam Finishing). The expected focusing performance was verified by ray tracings after each ion beam finish iteration using the measured topography results.

43 PARTICLE ACCELERATORS↗

The role of absorption in Raman amplification in warm plasma

Raman backscattering in plasma is subject to--collisional and collisionless--absorption of the interacting waves. A model for studying its role over a wide parameter range is developed by coupling the envelope equations for pump, probe, and plasma waves with those describing heating of the plasma. The latter is treated as a warm fluid, making the model useful for moderate temperatures and field amplitudes. The main effect is the time-dependent Bohm-Gross shift of the Langmuir resonance frequency, which can either enhance or suppress amplification; this can be further controlled by varying the frequency of the pump. Anisotropy in the collisional processes for longitudinal and transverse waves leads to temperature anisotropy at high field amplitudes. Direct Landau damping of the plasma wave, as well as its contribution to the frequency shift, can be neglected due to rapid saturation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nanoheteroepitaxy of gallium arsenide on strain-compliant silicon-germanium nanowires

Heterogeneous integration of high-quality GaAs on Si-based substrates using a selective migration-enhanced epitaxy (MEE) of GaAs on strain-compliant SiGe nanowires was demonstrated for the first time. The physics of compliance in nanoscale heterostructures was captured and studied using finite-element simulation. It is shown that nanostructures can provide additional substrate compliance for strain relief and therefore contribute to the formation of defect-free GaAs on SiGe. Extensive characterization using scanning electron microscopy and cross-sectional transmission electron microscopy was performed to illustrate the successful growth of GaAs on SiGe nanowire. Raman and Auger electron spectroscopy measurements further confirmed the quality of the GaAs grown and the high growth selectivity of the MEE process.

36 MATERIALS SCIENCE↗