Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pressure effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

THE EFFECT OF ELECTRON THERMAL PRESSURE ON THE OBSERVED MAGNETIC HELICITY IN THE SOLAR WIND

Statistical analysis of magnetic helicity spectra in the solar wind at 1 au is carried out. A large database of the solar wind intervals assembled from Wind spacecraft magnetic and plasma data is used. The effect of the electron thermal pressure on the wavenumber position of the helicity signature, i.e., the peak of the spectrum, is studied. The position shows a statistically significant dependence on both the electron and proton pressures. However, the strongest dependence is seen when the two pressures are summed. These findings confirm that the generation of the magnetic helicity is associated with an increasing compressibility of the turbulent fluctuations at smaller kinetic scales. It is argued that instrumental artifacts do not contribute to the helicity signature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of hydrogen partial pressure on crack initiation and growth rate in vintage X52 steel

There is an increasing interest in ensuring compatibility of existing natural gas infrastructure with conveyance of hydrogen, especially for vintage (pre-1970s) pipeline steels. While hydrogen is known to affect the fatigue and fracture resistance of these materials, there is a lack of data on its effects on crack initiation at low hydrogen partial pressure. To address this gap, the current work presents a series of fatigue tests on vintage API Grade X52 steel in pure nitrogen, air and gaseous hydrogen at partial pressures of 1 and 207 bar. Circumferential notch tension (CNT) specimens with direct current potential difference (DCPD) measurements are used to get S–N curves for crack initiation and failure, and compact tension (CT) tests to assess crack growth rates. Results indicate that air accelerates crack initiation, low hydrogen partial pressure affects the crack growth rate, and higher pressures have the largest impact on both. Surprisingly, crack initiation is faster in air than at 1 bar hydrogen partial pressure. The CNT tests also reveal that the orientation of the banded microstructure has no effect on the crack initiation site, but it influences its growth behavior. Moreover, fractography shows that hydrogen also promotes instances of quasi-cleavage and intergranular fracture, linked to embrittlement of the material. Here, these results demonstrate that, while hydrogen may impact the entirety of the fatigue process, its effects on the early stages of damage accumulation become relevant only at larger pressures. More comprehensive studies of crack initiation in hydrogen atmospheres will be critical to future codes and standards for hydrogen infrastructure.

Circumferential notch tension↗

The Zn, S, and Cl Isotope Compositions of Mare Basalts: Implications for the Effects of Eruption Style and Pressure on Volatile Element Stable Isotope Fractionation on the Moon

We compare the stable isotope compositions of Zn, S, and Cl for Apollo mare basalts to better constrain the sources and timescales of lunar volatile loss. Mare basalts have broadly elevated yet limited ranges in δ(66)Zn, δ(34)S, and δ(37)Cl_(SBC+WSC) values of 1.27 ± 0.71, 0.55 ± 0.18, and 4.1 ± 4.0‰, respectively, compared to the silicate Earth at 0.15, –1.28, and 0‰, respectively. We find that the Zn, S, and Cl isotope compositions are similar between the low- and high-Ti mare basalts, providing evidence of a geochemical signature in the mare basalt source region that is inherited from lunar formation and magma ocean crystallization. The uniformity of these compositions implies mixing following mantle overturn, as well as minimal changes associated with subsequent mare magmatism. Degassing of mare magmas and lavas did not contribute to the large variations in Zn, S, and Cl isotope compositions found in some lunar materials (i.e., 15‰ in δ(66)Zn, 60‰ in δ(34)S, and 30‰ in δ(37)Cl). This reflects magma sources that experienced minimal volatile loss due to high confining pressures that generally exceeded their equilibrium saturation pressures. Alternatively, these data indicate effective isotopic fractionation factors were near unity. Our observations of S isotope compositions in mare basalts contrast to those for picritic glasses (Saal and Hauri 2021), which vary widely in S isotope compositions from –14.0 to 1.3‰, explained by extensive degassing of picritic magmas under high-P/P_(Sat) values (>0.9) during pyroclastic eruptions. The difference in the isotope compositions of picritic glass beads and mare basalts may result from differences in effusive (mare) and explosive (picritic) eruption styles, wherein the high-gas contents necessary for magma fragmentation would result in large effective isotopic fractionation factors during degassing of picritic magmas. Additionally, in highly vesiculated basalts, the δ(34)S and δ(37)Cl values of apatite grains are higher and more variable than the corresponding bulk-rock values. The large isotopic range in the vesiculated samples is explained by late-stage low-pressure “vacuum” degassing (P/P-(Sat) ~ 0) of mare lavas wherein vesicle formation and apatite crystallization took place post-eruption. Bulk-rock mare basalts were seemingly unaffected by vacuum degassing. Degassing of mare lavas only became important in the final stages of crystallization recorded in apatite—potentially facilitated by cracks/fractures in the crystallizing flow. We conclude that samples with wide-ranging volatile element isotope compositions are likely explained by localized processes, which do not represent the bulk Moon.

Halogens↗

Elasticity of single-crystal superhydrous phase B at simultaneous high pressure-temperature conditions

We investigated the combined effect of pressure and temperature on the elasticity of single-crystal superhydrous phase B (Shy-B) using Brillouin scattering and X-ray diffraction up to 12 GPa and 700 K. Next, using the obtained elasticity, we modeled the anisotropy of Shy-B along slab geotherms, showing that Shy-B has a low anisotropy and cannot be the major cause of the observed anisotropy in the region. Modeled velocities of Shy-B show that Shy-B will be shown as positive velocity anomalies at the bottom transition zone. Once Shy-B is transported to the topmost lower mantle, it will exhibit a seismic signature of lower velocities than topmost lower mantle. We speculate that an accumulation of hydrous phases, such as Shy-B, at the topmost lower mantle with a weight percentage of ~17–26% in the peridotite layer as subduction progresses could help explain the observed 2–3% low shear velocity anomalies in the region.

58 GEOSCIENCES↗

Experimental and Theoretical Studies on a High Pressure Monoclinic Phase of Ammonia Borane

The effect of pressure on the structure of ammonia borane NH{sub 3}BH{sub 3} (AB) was investigated using a combination of high pressure X-ray diffraction (XRD) and density functional theory (DFT). In situ XRD was performed up to 15.0 GPa at room temperature in a diamond anvil cell, and two first-order phase transitions were observed at 1.6 and 12.9 GPa. The ambient pressure I4mm structure transformed into the high pressure Cmc2{sub 1} phase at 1.6 GPa, and then experienced a second-order isostructural phase transition at 5 GPa, and further developed into a monoclinic P2{sub 1} (Z = 4) phase at 12.9 GPa. The structure of the high pressure P2{sub 1} phase was solved by powder diffraction data and further optimized using DFT calculations. The high pressure phase transitions were found to be reversible upon releasing pressure. The behavior of the N-H {hor_ellipsis} H-B dihydrogen bonding framework, inter- and intramolecular interactions at high pressure was also investigated. The origin of the phase transition at 12.9 GPa is attributed to the reorganization of the dihydrogen bonding network and the change in the rotational dynamics of the NH{sub 3} and BH{sub 3} groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Suppression of metal-to-insulator transition and stabilization of superconductivity by pressure in Re 3 Ge 7

The effect of pressure on the low-temperature states of the Re 3 ⁡Ge 7 is investigated by both electrical and Hall resistance and magnetization measurements. At ambient pressure, the temperature-dependent resistance of Re 3 ⁡Ge 7 behaves quasilinearly from room temperature down to 60 K, then undergoes a two-step metal-to-insulator transition (MIT) at temperatures T 1 =59.4K and T 2 =58.7K, which may be related to a structural phase transition or occurrence of charge-density wave ordering. Upon applying pressure, the two-step (T 1 ,T 2 ) MIT splits into three steps (T 1 ,T 2 . and T 3 ) above 1 GPa, and all traces of MITs are fully suppressed by ~8 GPa. Subsequently, the onset of bulk superconductivity (SC) occurs between 10.8 and 12.2 GPa and persists to our highest pressure of 26.8 GPa. At 12.2 GPa the superconducting transition temperature, T c , and upper critical field, H c ⁢2 reach the maximum of T c (onset) ~5.9 K and H c ⁢2 (1.8 K) ~14 kOe. Finally, our results not only present the observation of SC under high pressure in Re 3 ⁡Ge 7 but also delineate the interplay between SC and other competing electronic states by creating a T-p phase diagram for this potentially topologically nontrivial system Re 3 ⁡Ge 7 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamics of Nano-Confined Water under Pressure

We report a study of the effects of pressure on the diffusivity of water molecules confined in single- wall carbon nanotubes (SWNT) with average mean pore diameter of 16 A. The measurements were carried out using high-resolution neutron scattering, over the temperature range 220 T 260 K, and at two pressure conditions: ambient and elevated pressure. The high pressure data were collected at constant volume on cooling, with P varying from 1.92 kbar at temperature T = 260 K to 1.85 kbar at T = 220 K. Analysis of the observed dynamic structure factor S(Q, E) reveals the presence of two relaxation processes, a faster diffusion component (FC) associated with the motion of caged or restricted molecules, and a slower component arising from the free water molecules diffusing within the SWNT matrix. While the temperature dependence of the slow relaxation time exhibits a Vogel-Fulcher-Tammann law and is non-Arrhenius in nature, the faster component follows an Arrhenius exponential law at both pressure conditions. The application of pressure remarkably slows down the overall molecular dynamics, in agreement with previous observations, but most notably affects the slow relaxation. The faster relaxation shows marginal or no change with pressure within the experimental conditions.

Confined Water↗

Prediction of space shuttle fluctuating pressure environments, including rocket plume effects

Preliminary estimates of space shuttle fluctuating pressure environments have been made based on prediction techniques developed by Wyle Laboratories. Particular emphasis has been given to the transonic speed regime during launch of a parallel-burn space shuttle configuration. A baseline configuration consisting of a lightweight orbiter and monolithic SRB, together with a typical flight trajectory, have been used as models for the predictions. Critical fluctuating pressure environments are predicted at transonic Mach numbers. Comparisons between predicted environments and wind tunnel test results, in general, showed good agreement. Predicted one-third octave band spectra for the above environments were generally one of three types: (1) attached turbulent boundary layer spectra (typically high frequencies); (2) homogeneous separated flow and shock-free interference flow spectra (typically intermediate frequencies); and (3) shock-oscillation and shock-induced interference flow spectra (typically low frequencies). Predictions of plume induced separated flow environments were made. Only the SRB plumes are important, with fluctuating levels comparable to compression-corner induced separated flow shock oscillation.

Plotkin, K. J.↗

Basin Management of Geologic CO2 Storage: Effect of Well Spacing on CO2 Plume and Pressure Interference

This is the conference paper accompanying an oral presentation made at the Society of Petroleum Engineers (SPE) Western Regional Meeting (WRM) held in Bakersfield, California, April 26–28, 2022. The paper provides the results of a basin-scale CO2 storage modeling project investigating subsurface pressure interference among CO2 injection wells located in proximity to each other.

Wijaya, Nur↗

Effective anisotropy gradient in pressure graded [Co/Pd] multilayers

We have used polarized neutron reflectometry to show that controlled variation of growth pressure during deposition of Co/Pd multilayers can be used to achieve a significant vertical gradient in the effective anisotropy. This gradient is strongly dependent on deposition order (low to high pressure or vice versa), and is accompanied by a corresponding gradient in saturation magnetization. These results demonstrate pressure-grading as an attractively simple technique for tailoring the anisotropy profile of magnetic media.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of confining wall potential on charged collimated dust beam in low-pressure plasma

The effect of confining wall potential on charged collimated dust beam in low-pressure plasma has been studied in a dusty plasma experimental setup by applying electrostatic field to each channel of a multicusp magnetic cage. Argon plasma is produced by hot cathode discharge method at a pressure of 5×10{sup −4} millibars and is confined by a full line cusped magnetic field confinement system. Silver dust grains are produced by gas-evaporation technique and move upward in the form of a collimated dust beam due to differential pressure maintained between the dust and plasma chambers. The charged grains in the beam after coming out from the plasma column enter into the diagnostic chamber and are deflected by a dc field applied across a pair of deflector plates at different confining potentials. Both from the amount of deflection and the floating potential, the number of charges collected by the dust grains is calculated. Furthermore, the collimated dust beam strikes the Faraday cup, which is placed above the deflector plates, and the current (∼pA) so produced is measured by an electrometer at different confining potentials. The experimental results demonstrate the significant effect of confining wall potential on charging of dust grains.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Integrated Suit Test 1 - A Study to Evaluate Effects of Suit Weight, Pressure, and Kinematics on Human Performance during Lunar Ambulation

In an effort to design the next generation Lunar suit, NASA has initiated a series of tests aimed at understanding the human physiological and biomechanical affects of space suits under a variety of conditions. The first of these tests was the EVA Walkback Test (ICES 2007-01-3133). NASA-JSC assembled a multi-disciplinary team to conduct the second test of the series, titled Integrated Suit Test 1 (IST-1), from March 6 through July 24, 2007. Similar to the Walkback Test, this study was performed with the Mark III (MKIII) EVA Technology Demonstrator suit, a treadmill, and the Partial Gravity Simulator in the Space Vehicle Mock-Up Facility at Johnson Space Center. The data collected for IST-1 included metabolic rates, ground reaction forces, biomechanics, and subjective workload and controllability feedback on both suited and unsuited (shirt-sleeve) astronaut subjects. For IST-1 the center of gravity was controlled to a nearly perfect position while the weight, pressure and biomechanics (waist locked vs. unlocked) were varied individually to evaluate the effects of each on the ability to perform level (0 degree incline) ambulation in simulated Lunar gravity. The detailed test methodology and preliminary key findings of IST-1 are summarized in this report.

Gernhardt, Michael L.↗

Magnetic reconnection with pressure tensor in electron magnetohydrodynamics

The dissipation mechanisms of reconnection and the pressure gradient effects on tearing mode with guide magnetic field are analyzed systematically by including the electron pressure tensor in electron magnetohydrodynamics. It is found that which dissipation mechanism dominates, either pressure-based dissipation or inertia-based dissipation, has a great relation with the relative scaling orders between the electron thermal Larmor radius and electron inertia skin depth. The effects of pressure gradient also depend on the relative magnitude between parallel and perpendicular equilibrium pressure gradients. When the pressure-based dissipation is dominant, the condition that pressure drives or suppresses tearing mode instability also depends on the relative magnitude between parallel and perpendicular equilibrium pressure gradients.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analytical and numerical study of the transverse Kelvin-Helmholtz instability in tokamak edge plasmas

Sheared flows perpendicular to the magnetic field can be driven by the Reynolds stress or ion pressure gradient effects and can potentially influence the stability and turbulent saturation level of edge plasma modes. On the other hand, such flows are subject to the transverse Kelvin- Helmholtz (KH) instability. Here, the linear theory of KH instabilities is first addressed with an analytic model in the asymptotic limit of long wavelengths compared with the flow scale length. The analytic model treats sheared ExB flows, ion diamagnetism (including gyro-viscous terms), density gradients and parallel currents in a slab geometry, enabling a unified summary that encompasses and extends previous results. In particular, while ion diamagnetism, density gradients and parallel currents each individually reduce KH growth rates, the combined effect of density and ion pressure gradients is more complicated and partially counteracting. Secondly, the important role of realistic toroidal geometry is explored numerically using an invariant scaling analysis together with the 2DX eigenvalue code to examine KH modes in both closed and open field line regions. For a typical spherical torus magnetic geometry, it is found that KH modes are more unstable at and just outside the separatrix as a result of the distribution of magnetic shear. Lastly implications for reduced edge turbulence modeling codes are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Insight into the Chemistry of PETN Under Shock Compression Through Ultrafast Broadband Mid-Infrared Absorption Spectroscopy

In this study, thin films of pentaerythritol tetranitrate (PETN) were shock compressed using the laser driven shock apparatus at Los Alamos National Laboratory (LANL). Two spectroscopic probes were available to this apparatus: visible white light transient absorption spectroscopy (VIS) from 400 to 700 nm and mid-infrared transient absorption spectroscopy (MIR) from 1150 to 3800 cm –1 . Important PETN vibrational modes are the symmetric and antisymmetric NO 2 stretches at 1280 and 1650 cm –1 , respectively, as well as CH stretches at ~2900 cm –1 . Shock strength was varied from approximately 3 to 55 GPa to span from the chemically unreactive regime to the regime in which fast chemical reaction took place on the 250 ps time scale of the measurements. VIS and MIR results suggest irreversible chemistry was induced in PETN at pressures above 30 GPa. At lower shock pressures, the spectroscopy showed minimal changes attributable to pressure induced effects. Under the higher-pressure reactive conditions, the frequency region at the antisymmetric NO 2 stretch mode had a significantly increased absorption while the region around the symmetric NO 2 stretch did not. No observable increased absorption occurred in the higher frequency regions where CH-, NH-, and OH- bond absorptions would be observed. A broad absorption appeared on the shoulder at the red-edge of the CO 2 vibrational band around 2200 cm –1 . In addition to the experiments, reactive molecular dynamics were carried out under equivalent shock conditions to correlate the evolution of the infrared spectrum to molecular processes. The simulations show results consistent to experiments up to 30 GPa but suggest that NO and NO 2 related features provided the strongest contributions to the shocked infrared changes. Proposed mechanisms for shocked PETN chemistry are analyzed as consistent or inconsistent with the data presented here. Our experimental data suggests C≡O or N 2 O bond formation, nitrite formation, and absence of significant hydroxyl or amine concentrations in the initial chemistry steps in PETN shocked above 30 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Overstability of acoustic waves in strongly magnetized anisotropic magnetohydrodynamic shear flows

We present a linear stability analysis of the perturbation modes in anisotropic magnetohydrodynamic (MHD) flows with velocity shear and strong magnetic field. Collisionless or weakly collisional plasma is described within the 16-momentum MHD fluid closure model that takes into account not only the effect of pressure anisotropy but also the effect of anisotropic heat fluxes. In this model, the low frequency acoustic wave is revealed into a standard acoustic mode and higher frequency fast thermo-acoustic and lower frequency slow thermo-acoustic waves. It is shown that thermo-acoustic waves become unstable and grow exponentially when the heat flux parameter exceeds some critical value. It seems that velocity shear makes thermo-acoustic waves overstable even at subcritical heat flux parameters. Thus, when the effect of heat fluxes is not profound acoustic waves will grow due to the velocity shear, while at supercritical heat fluxes the flow reveals compressible thermal instability. Anisotropic thermal instability should be also important in astrophysical environments, where it will limit the maximal value of magnetic field that a low density ionized anisotropic flow can sustain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dissimilatory Sulfate Reduction Under High Pressure by Desulfovibrio alaskensis G20

Biosouring results from production of H2S by sulfate-reducing microorganisms (SRMs) in oil reservoirs. H2S is toxic, corrosive, and explosive, and as such, represents a significant threat to personnel, production facilities, and transportation pipelines. Since typical oil reservoir pressures can range from 10 to 50 MPa, understanding the role that pressure plays in SRM metabolism is important to improving souring containment strategies. To explore the impact of pressure, we grew an oil-field SRM isolate, Desulfovibrio alaskensis G20, under a range of pressures (0.1–14 MPa) at 30°C. The observed microbial growth rate was an inverse function of pressure with an associated slight reduction in sulfate and lactate consumption rate. Competitive fitness experiments with randomly bar-coded transposon mutant library sequencing (RB-TnSeq) identified several genes associated with flagellar biosynthesis and assembly that were important at high pressure. The fitness impact of specific genes was confirmed using individual transposon mutants. Confocal microscopy revealed that enhanced cell aggregation occurs at later stages of growth under pressure. We also assessed the effect of pressure on SRM inhibitor potency. Dose-response experiments showed a twofold decrease in the sensitivity of D. alaskensis to the antibiotic chloramphenicol at 14 MPa. Fortuitously, pressure had no significant influence on the inhibitory potency of the common souring controlling agent nitrate, or the emerging SRM inhibitors perchlorate, monofluorophosphate, or zinc pyrithione. Our findings improve the conceptual model of microbial sulfate reduction in high-pressure environments and the influence of pressure on souring inhibitor efficacy.

59 BASIC BIOLOGICAL SCIENCES↗