SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Improved hollow cathode for neutral-beam injector ion sources rapidly started by dielectric breakdown of ignitor plug located at one end of open ended tube. Used in low-current ion implantation, milling, sputtering, and bombardment for surface treatment.
A comprehensive data research and analysis for evaluating the use of automotive fuels as a substitute for aviation grade fuel by piston-type general aviation aircraft engines is presented. Historically known problems and potential problems with fuels were reviewed for possible impact relative to application to an aircraft operational environment. This report reviews areas such as: fuel specification requirements, combustion knock, preignition, vapor lock, spark plug fouling, additives for fuel and oil, and storage stability.
The development of a tactical rubidium frequency standard (TRFS) for the SEEK-TALK program is discussed. This effort, which is entering the prototype stage, is directed toward the establishment of a production capability for miniature rubidium clocks of medium stability capable of fast warmup and extreme ruggedness for military avionics applications. The overall unit consists of an ultraminiature physics package and four plug-in circuit boards inside a 2 1/2-inch square by 4-inch box. This size is achieved without the extensive use of hybrid microcircuitry, yet is believed to be the smallest atomic frequency standard yet developed.
The final hardware and system qualification phase of a two part stand-alone photovoltaic (PV) system development is covered. The final design incorporated modular, power blocks capable of expanding incrementally from 320 watts to twenty kilowatts (PK). The basic power unit (PU) was nominally rated 1.28 kWp. The controls units, power collection buses and main lugs, electrical protection subsystems, power switching, and load management circuits are housed in a common control enclosure. Photo-voltaic modules are electrically connected in a horizontal daisy-chain method via Amp Solarlok plugs mating with compatible connectors installed on the back side of each photovoltaic module. A pair of channel rails accommodate the mounting of the modules into a frameless panel support structure. Foundations are of a unique planter (tub-like) configuration to allow for world-wide deployment without restriction as to types of soil. One battery string capable of supplying approximately 240 ampere hours nominal of carryover power is specified for each basic power unit. Load prioritization and shedding circuits are included to protect critical loads and selectively shed and defer lower priority or noncritical power demands. The baseline system, operating at approximately 2 1/2 PUs (3.2 kW pk.) was installed and deployed. Qualification was successfully complete in March 1983; since that time, the demonstration system has logged approximately 3000 hours of continuous operation under load without major incident.
Variation of pseudoporous plates used with coal gasifiers in pressure letdown stage of processing minimize clogging. Rotating plates containing variable gap annuli continually change flow path to enable erosionless reduction of gas pressure. Particles that otherwise clog porous plugs pass through gaps.
Unit simple, sensitive, rugged, and reliable. Diaphragmless microphone detects leaks from small boiler tubes. Porous plug retains carbon granules in tube while allowing pressure changes to penetrate to granules. Has greater life expectancy than previous controllers and used in variety of hot corrosive atmospheres.
An interactive computer code for simulation of a high-intensity turbulent combustor as a single point inhomogeneous stirred reactor was developed from an existing batch processing computer code CDPSR. The interactive CDPSR code was used as a guide for interpretation and direction of DOE-sponsored companion experiments utilizing Xenon tracer with optical laser diagnostic techniques to experimentally determine the appropriate mixing frequency, and for validation of CDPSR as a mixing-chemistry model for a laboratory jet-stirred reactor. The coalescence-dispersion model for finite rate mixing was incorporated into an existing interactive code AVCO-MARK I, to enable simulation of a combustor as a modular array of stirred flow and plug flow elements, each having a prescribed finite mixing frequency, or axial distribution of mixing frequency, as appropriate. Further increase the speed and reliability of the batch kinetics integrator code CREKID was increased by rewriting in vectorized form for execution on a vector or parallel processor, and by incorporating numerical techniques which enhance execution speed by permitting specification of a very low accuracy tolerance.
Parameters which contribute to supersonic jet shock noise were investigated for the purpose of determining means to reduce such noise generation to acceptable levels. Six dual-stream test nozzles with varying flow passage and plug closure designs were evaluated under simulated flight conditions in an anechoic chamber. All nozzles had combined convergent-divergent or convergent flow passages. Acoustic behavior as a function of nozzle flow passage geometry was measured. The acoustic data consist primarily of 1/3 octave band sound pressure levels and overall sound pressure levels. Detailed schematics and geometric characteristics of the six scale model nozzle configurations and acoustic test point definitions are presented. Tabulation of aerodynamic test conditions and a computer listing of the measured acoustic data are displayed.
Some acoustic properties of Kevlar-29 - a fine fibered, layered material is investigated. Kevlar is characterized by very high strength, uniform filaments arranged in a parallel batt where most filaments are random in the x-y plane but ordered as planes in the z direction. For experimental purposes, volume porosity, static flow resistance and mean filament diameter are used to identify the material. To determine the acoustic surface admittance of Kevlar, batts of the material are cut into small pads and placed into a standing wave tube terminated by a rigid brass plug. The attenuation and relative phase shift are recorded at each frequency in the range of 50 to 6000 Hz. Normalized conductance and susceptance are combined to form the acoustic absorption coefficient. The data are compared with theory by plotting the normalized admittance and normal incident absorption coefficient versus cyclic frequency.
A technology base for the thermal acoustic shield concept as a noise suppression device for single stream exhaust nozzles was developed. Acoustic data for 314 test points for 9 scale model nozzle configurations were obtained. Five of these configurations employed an unsuppressed annular plug core jet and the remaining four nozzles employed a 32 chute suppressor core nozzle. Influence of simulated flight and selected geometric and aerodynamic flow variables on the acoustic behavior of the thermal acoustic shield was determined. Laser velocimeter and aerodynamic measurements were employed to yield valuable diagnostic information regarding the flow field characteristics of these nozzles. An existing theoretical aeroacoustic prediction method was modified to predict the acoustic characteristics of partial thermal acoustic shields.
The construction of high Reynolds number facilities, such as the National Transonic Facility (NTF) and the 0.3-m Transonic Cryogenic Tunnel (TCT), has stimulated interest again in the study of orifice induced static pressure. In a high Reynolds number facility, the orifice will have a much larger effect on the boundary layer than in a conventional wind tunnel. The present investigation was performed in the 0.3-m TCT at Mach numbers in the range from 0.60 to 0.80 and Reynolds numbers in the range from 6,000,000 to 40,000,000 with the objective to compare the porous plug orifices to conventional 0.025 cm orifices in a high Reynolds number environment. It was found that there was an error at high Reynolds numbers which could not be neglected and that the use of a porous metal disk in a conventional orifice could virtually eliminate the orifice induced pressure error.
In the clinostat environment, Arabidopsis thaliana (L.) Heynh. plants grown in cultures having limited gas exchange with the external atmosphere developed 'above' the agar media a large mass of roots which eventually covered the stem. Cultural conditions were 0.5 rpm, 350 ft.c. from cool white fluorescent lamps, and 25 C. Limited gas exchange culture tubes were covered with Saran Wrap or mylar film, while free gas exchange cultures were plugged with cotton or polyurethane foam. Average shoot-root dry weight ratio of clinostatted, limited gas exchange plants was 3.39 (p less than 0.001) as compared to 10.1 for upright stationary and 10.3 for vertically rotated controls. Average dry weight (48.3 mg) of all clinostatted shoots was greater than those reported by other investigators (15.1 mg). Finally, shoots of the clinostatted plants reported here were almost 2x heavier (p less than 0.01) than the controls (28.7 mg, 26.7 mg), a result contrary to findings of previous investigators, where the clinostatted plants are the lightest (clinostat 15.1 mg, controls 16.5 mg and 17.2 mg).
Electron cyclotron resonance heating is one of the most commonly used methods of heating electrons in the plugs and in the thermal barriers of tandem mirrors. The intense coherent electromagnetic waves used for such heating are susceptible to parametric decay into other modes. Significant growth rates are found for the decay of either ordinary or extraordinary waves into two magnetized electron plasma waves. This and related effects may result in electron heating mechanisms rather different than those assumed in linear ray-tracing calculations. These results may help explain the unusual effects observed during heating of the Phaedrus tandem mirror device. In the general case, these instabilities may be strongly inhibited by density gradients.
Battery-charger concept for wheelchairs includes magnetic-flux coupling instead of electrical connections between power sources and wheelchairs. Concept meant to facilitate operation by patients whose disabilities make it difficult or impossible to maneuver common electrical plugs into or out of ac wall outlets.
About 95 percent of faults detected. Programable instrument periodically checks for failures in system that generates alphanumerical and other symbol voltages for cathode-ray-tube displays. Symbol-generator tester compares gated test-point voltages with predetermined voltage limits while circuit under test performs commanded operation. A go/no-go indication given, depending on whether test voltage is or is not within its specification. Tester in plug-in modular form, temporarily wired to generator test points, or permanently wired to these points.
The use of an Apple II+ microcomputer to collect data during the operation of the 7 inch Mach Seven Tunnel is discussed. A method by which the contamination of liquid oxygen is monitored with sound speed techniques is investigated. The electrical equivalent of a transducer bonded to a high pressure fill plug is studied. The three areas are briefly explained and data gathered for each area are presented.
Interpretations of Mariner 9 and Viking images of the mottled plains in Mare Acidalium are present and discussed. Although the boundaries between all the units are gradational, four subdivisions were recognized within the mottled plains region. One of these subdivisions was designated hummocky mottled plains. The unit is characterized by many small (1 km), irregularly spaced dark hills surrounded by brighter material. One very poor-quality, high-resolution Viking strip (528B01-04) indicates that some of these dark hills have circular summit depressions. Possible interpretations of origin of these hills include: cinder cones, volcanic domes, maar volcanoes, pseudocraters, impact craters, or pingos. The uncratered hills or knobs may be igneous plugs, volcanic necks, or the dark remnants of a hummocky, cratered surface protruding through a relatively bright eolian blanket. The presence, however, of the small dark hills on the flow of the large (130 km diameter) C(2) crater Lomonosov, suggests that similar dark hills elsewhere also may be secondary.
Four basic areas of research and development of superconducting gyroscopes are studied. Chapter 1 studies the analysis of a SQUID readout for a superconducting gyroscope. Chapter 2 studies the dependence of spin-up torque on channel and gas properties. Chapter 3 studies the theory of super fluid plug operation. And chapter 4 studies the gyro rotor and housing manufacture.