Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Performance Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Palus Somni - Anomalies in the correlation of Al/Si X-ray fluorescence intensity ratios and broad-spectrum visible albedos

The positive correlation between Al/Si X-ray fluorescence intensity ratios determined during the Apollo 15 lunar mission and a broad-spectrum visible albedo of the moon is quantitatively established. Linear regression analysis performed on 246 1 degree geographic cells of X-ray fluorescence intensity and visible albedo data points produced a statistically significant correlation coefficient of .78. Three distinct distributions of data were identified as (1) within one standard deviation of the regression line, (2) greater than one standard deviation below the line, and (3) greater than one standard deviation above the line. The latter two distributions of data were found to occupy distinct geographic areas in the Palus Somni region.

Clark, P. E.↗

International Ultraviolet Explorer (IUE) satellite mission analysis

The results are presented of the mission analysis performed by Computer Sciences Corporation (CSC) in support of the International Ultraviolet Explorer (IUE) satellite. The launch window is open for three separate periods (for a total time of 7 months) during the year extending from July 20, 1977, to July 20, 1978. The synchronous orbit shadow constraint limits the launch window to approximately 88 minutes per day. Apogee boost motor fuel was computed to be 455 pounds (206 kilograms) and on-station weight was 931 pounds (422 kilograms). The target orbit is elliptical synchronous, with eccentricity 0.272 and 24 hour period.

Cook, R. A.↗

Program on Earth Observation Data Management Systems (EODMS), appendixes

The needs of state, regional, and local agencies involved in natural resources management in Illinois, Iowa, Minnesota, Missouri, and Wisconsin are investigated to determine the design of satellite remotely sensed derivable information products. It is concluded that an operational Earth Observation Data Management System (EODMS) will be most beneficial if it provides a full range of services - from raw data acquisition to interpretation and dissemination of final information products. Included is a cost and performance analysis of alternative processing centers, and an assessment of the impacts of policy, regulation, and government structure on implementing large scale use of remote sensing technology in this community of users.

Eastwood, L. F., Jr.↗

LANDSAT-1 and LANDSAT-2 flight evaluation report

A flight performance analysis of the LANDSAT-1 spacecraft is presented, and some of the following were examined: (1) orbital parameters; (2) power subsystem; (3) attitude control subsystem; (4) command/clock subsystem; (5) narrowband tape recorders; and (6) magnetic moment compensating assembly.

Source record↗

SIMS prototype system 1 test results: Engineering analysis

The space and domestic water solar heating system designated SIMS Prototype Systems 1 was evaluated. The test system used 720 ft (gross) of Solar Energy Products Air Collectors, a Solar Control Corporation SAM 20 Air Handler with Model 75-175 control unit, a Jackson Solar Storage tank with Rho Sigma Mod 106 controller, and 20 tons of rack storage. The test data analysis performed evaluates the system performance and documents the suitability of SIMS Prototype System 1 hardware for field installation.

Source record↗

Experiments on asteroids using hard landers

Hard lander missions to asteroids are examined using the Westphal penetrator study as a basis. Imagery and chemical information are considered to be the most significant science to be obtained. The latter, particularly a detailed chemical analysis performed on an uncontaminated sample, may answer questions about the relationships of asteroids to meteorites and the place of asteroids in theories of the formation of the solar system.

Turkevich, A.↗

Phobos encounter trajectory and maneuver design

In February 1977, the Viking 1 Orbiter made repeated flybys of the Martian satellite Phobos at distances near 100 kilometers. These close encounters allowed a detailed scientific investigation of the nature and origin of Phobos. A sequence of three maneuvers was required to achieve the encounters. This paper presents the trajectory analysis performed to accommodate the scientific objectives and the spacecraft propulsive maneuver strategy used to achieve the desired trajectory while satisfying operational constraints. The actual maneuvers executed and the resultant Phobos encounter conditions are presented.

Diehl, R. E.↗

Carrier synchronization techniques for unbalanced QPSK signals. I

This paper uses MAP estimation techniques to obtain carrier reconstruction circuits for unbalanced QPSK signals. In addition, the performance analysis of these circuits is carried out to the extent that a loop design can proceed. Numerical results are presented in order to demonstrate the utility of the theory developed. This signal design will be used in the development of the Tracking and Data Relay Satellite System (TDRSS) and the Navigation Satellite Timing and Ranging Global Positioning System (NAVSTAR GPS).

Braun, W. R.↗

The shock tube as a device for testing transonic airfoils at high Reynolds numbers

A performance analysis of gas-driven shock tubes shows that transonic airfoil flows with chord Reynolds numbers in the range of 100 million can be generated behind the primary shock in a large shock tube. A study of flow over simple airfoils has been carried out at low and intermediate Reynolds numbers to assess the testing technique. Results obtained from schlieren photos and airfoil pressure measurements show that steady transonic flows similar to those observed for the airfoils in wind tunnels can be generated within the available testing time in a shock tube with either properly-contoured test section walls or a properly-designed slotted-wall test section. The study indicates that the shock tube is a useful facility for studying two-dimensional high Reynolds number transonic airfoil flows.

Cook, W. J.↗

Minicomputer version of SPAR

SPAR (Structural Performance Analysis and Redesign Program), powerful tool for efficiently solving finite-element structural analysis problems, has been implemented on minicomputers. System analyzes stress, buckling, vibration, and thermal loads of large linear finite-element structural models.

Storaasli, O. O.↗

The design of solar-heating systems

Report describes organized approach to design of solar-heating systems. Such parameters as collector area, storage capacity, hardware, and constraints are determined and complete cost-and-performance analysis are made. Report provides practical example by tracing development of several systems sized for single family, multifamily, and commercial buildings in Minneapolis area.

Source record↗

Digital automatic gain control

Performance analysis, used to evaluated fitness of several circuits to digital automatic gain control (AGC), indicates that digital integrator employing coherent amplitude detector (CAD) is best device suited for application. Circuit reduces gain error to half that of conventional analog AGC while making it possible to automatically modify response of receiver to match incoming signal conditions.

Uzdy, Z.↗

Redundant structures at elevated temperatures

In many structural systems, it is desirable to perform analysis to determine how safe structure is when subjected to "yielding" loads. FRAME1 computer program analyzes, in both plastic and elastic ranges, redundant structures subjected to thermal and mechanical loads.

Guidry, L. I.↗

Application of shock tubes to transonic airfoil testing at high Reynolds numbers

Performance analysis of a gas-driven shock tube shows that transonic airfoil flows with chord Reynolds numbers of the order of 100 million can be produced, with limitations being imposed by the structural integrity of the facility or the model. A study of flow development over a simple circular arc airfoil at zero angle of attack was carried out in a shock tube at low and intermediate Reynolds numbers to assess the testing technique. Results obtained from schlieren photography and airfoil pressure measurements show that steady transonic flows similar to those produced for the same airfoil in a wind tunnel can be generated within the available testing time in a shock tube with properly contoured test section walls.

Cook, W. J.↗

EDIN design study alternate space shuttle booster replacement concepts. Volume 2: Design simulation results

Historical weight estimating relationships were developed for the liquid rocket booster (LRB) using Saturn technology, and modified as required to support the EDIN05 study. Mission performance was computed using February 1975 shuttle configuration groundrules to allow reasonable comparison of the existing shuttle with the EDIN05 designs. The launch trajectory was constrained to pass through both the RTLS/AOA and main engine cut-off points. Performance analysis was based on a point design trajectory model which optimized initial tilt rate and exo-atmospheric pitch profile. A gravity turn was employed during the boost phase in place of the shuttle angle-of-attack profile. Engine throttling add/or shutdown was used to constrain dynamic pressure and/or longitudinal acceleration where necessary.

Demakes, P. T.↗

A prioritized set of physiological measurements for future spaceflight experiments

A set of desired experimental measurements to be obtained in future spaceflights in four areas of physiological investigation are identified. The basis for identifying the measurements was the physiological systems analysis performed on Skylab data and related ground-based studies. An approach for prioritizing the measurement list is identified and discussed with the use of examples. A prioritized measurement list is presented for each of the following areas; cardiopulmonary, fluid-renal and electrolyte, hematology and immunology, and musculoskeletal. Also included is a list of interacting stresses and other factors present in spaceflight experiments whose effects may need to be quantified.

Source record↗

Feasibility study for a numerical aerodynamic simulation facility. Volume 1

A Numerical Aerodynamic Simulation Facility (NASF) was designed for the simulation of fluid flow around three-dimensional bodies, both in wind tunnel environments and in free space. The application of numerical simulation to this field of endeavor promised to yield economies in aerodynamic and aircraft body designs. A model for a NASF/FMP (Flow Model Processor) ensemble using a possible approach to meeting NASF goals is presented. The computer hardware and software are presented, along with the entire design and performance analysis and evaluation.

Lincoln, N. R.↗