Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PURIFICATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Tetraethylene glycol promoted two-step, one-pot rapid synthesis of indole-3-[1- 11 C]acetic acid

An operationally friendly, two-step, one-pot process has been developed for the rapid synthesis of carbon-11 labeled indole-3-acetic acid ([ 11 ]IAA or [ 11 ]auxin). By replacing an aprotic polar solvent with tetraethylene glycol, nucleophilic [ 11 ]cyanation and alkaline hydrolysis reactions were performed consecutively in a single pot without a time-consuming intermediate purification step. The entire production time for this updated procedure is 55 min, which dramatically simplifies the entire synthesis and reduces the starting radioactivity required for a whole plant imaging study.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2015

Electron microscopic analysis of rotavirus assembly-replication intermediates

Rotaviruses (RVs) replicate their segmented, double-stranded RNA genomes in tandem with early virion assembly. In this study, we sought to gain insight into the ultrastructure of RV assembly-replication intermediates (RIs) using transmission electron microscopy (EM). Specifically, we examined a replicase-competent, subcellular fraction that contains all known RV RIs. Three never-before-seen complexes were visualized in this fraction. Using in vitro reconstitution, we showed that ~15-nm doughnut-shaped proteins in strings were nonstructural protein 2 (NSP2) bound to viral RNA transcripts. Moreover, using immunoaffinity-capture EM, we revealed that ~20-nm pebble-shaped complexes contain the viral RNA polymerase (VP1) and RNA capping enzyme (VP3). Finally, using a gel purification method, we demonstrated that ~30–70-nm electron-dense, particle-shaped complexes represent replicase-competent core RIs, containing VP1, VP3, and NSP2 as well as capsid proteins VP2 and VP6. The results of this study raise new questions about the interactions among viral proteins and RNA during the concerted assembly–replicase process. - Highlights: • Rotaviruses replicate their genomes in tandem with early virion assembly. • Little is known about rotavirus assembly-replication intermediates. • Assembly-replication intermediates were imaged using electron microscopy.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2013

Recovery of yttrium from cathode ray tubes and lamps’ fluorescent powders: experimental results and economic simulation

Highlights: • Fluorescent powder of lamps. • Fluorescent powder of cathode ray rubes. • Recovery of yttrium from fluorescent powders. • Economic simulation for the processes to recover yttrium from WEEE. - Abstract: In this paper, yttrium recovery from fluorescent powder of lamps and cathode ray tubes (CRTs) is described. The process for treating these materials includes the following: (a) acid leaching, (b) purification of the leach liquors using sodium hydroxide and sodium sulfide, (c) precipitation of yttrium using oxalic acid, and (d) calcinations of oxalates for production of yttrium oxides. Experimental results have shown that process conditions necessary to purify the solutions and recover yttrium strongly depend on composition of the leach liquor, in other words, whether the powder comes from treatment of CRTs or lamp. In the optimal experimental conditions, the recoveries of yttrium oxide are about 95%, 55%, and 65% for CRT, lamps, and CRT/lamp mixture (called MIX) powders, respectively. The lower yields obtained during treatments of MIX and lamp powders are probably due to the co-precipitation of yttrium together with other metals contained in the lamps powder only. Yttrium loss can be reduced to minimum changing the experimental conditions with respect to the case of the CRT process. In any case, the purity of final products from CRT, lamps, and MIX is greater than 95%. Moreover, the possibility to treat simultaneously both CRT and lamp powders is very important and interesting from an industrial point of view since it could be possible to run a single plant treating fluorescent powder coming from two different electronic wastes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Selective single-atom adsorption for precision separation of lead ions in tap water via capacitive deionization

Capacitive deionization (CDI) offers a cost-effective and low-energy method for selective removal of Pb 2+ from drinking water. Modifying CDI electrode surfaces with functional groups presents a versatile approach to enhancing selective ion adsorption capacity. However, a comprehensive understanding of the selectivity and removal efficiency of Pb 2+ among diverse functional groups remains unexplored. Here, we investigated the effects of different functional groups (-SH, -COOH, and -NH 2 ) attached to the graphene oxide (GO) electrode surfaces on Pb 2+ selectivity and removal efficiency. Surprisingly, GO-COOH demonstrated single-atom adsorption of Pb 2+ , displaying superior removal efficiency and selectivity compared with -SH and -NH 2 , although -SH possesses significant chelation capability for Pb 2+ . Both density functional theory (DFT) calculations and X-ray pair distribution function (PDF) analyses confirmed that Pb 2+ exhibits a theoretically higher affinity to -COOH. Further, this research deepens our understanding of the interactions between functional groups and heavy metal ions, enabling selective and rapid separation of target cations for water purification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Production of β-ketoadipic acid from glucose in Pseudomonas putida KT2440 for use in performance-advantaged nylons

Biomass-derived chemicals can offer unique chemical functionality relative to petroleum-derived building blocks. To this end, here we report that β-ketoadipic acid (βKA), a C6 diacid with a β-ketone group, can be used as a performance-advantaged replacement for adipic acid in a nylon-6,6 analog. Building on our previous efforts to produce shikimate-derived products from carbohydrates, Pseudomonas putida KT2440 is engineered to produce βKA from glucose, achieving a 26 g/L titer. Following purification, βKA imparts an increase of 69 degrees C above the nylon-6,6 glass transition temperature and 20% reduced water permeability, equivalent to nylon-6,10. Molecular simulations predict that the enhanced thermal properties result from rigidity introduced by the β-ketone. Process analysis predicts that βKA can be produced for US$1.94/kg from sugars, requiring 63% less energy and emitting 43% less greenhouse gases than fossil-based adipic acid. Overall, this study illustrates the potential for βKA to serve as a useful building block for bio-based polymers.

09 BIOMASS FUELS↗
DOE OSTI2018

Orthogonal potency analysis of mesenchymal stromal cell function during ex vivo expansion

Highlights: • MSC potencies for their different functions are not identically affected by age. • In vitro age can strongly predict MSC adipogenic and hematopoietic-supporting potencies. • MSC shape can also strongly predict for hematopoietic-supporting potency. Adult bone marrow mesenchymal stromal cells (MSCs) have cross-functional, intrinsic potency that is of therapeutic interest. Their ability to regenerate bone, fat, and cartilage, modulate the immune system, and nurture the growth and function of other bone marrow hematopoietic stem/progenitor cells have all been evaluated by transplant applications of MSCs. These applications require the isolation and expansion scaled cell production. To investigate biophysical properties of MSCs that can be feasibly utilized as predictors of bioactivity during biomanufacturing, we used a low-density seeding model to drive MSCs into proliferative stress and exhibit the hallmark characteristics of in vitro aging. A low-density seeding method was used to generate MSCs from passages 1–7 to simulate serial expansion of these cells to maximize yield from a single donor. MSCs were subjected to three bioactivity assays in parallel to ascertain whether patterns in MSC age, size, and shape were associated with the outcomes of the potency assays. MSC age was found to be a predictor of adipogenesis, while cell and nuclear shape was strongly associated to hematopoietic-supportive potency. Together, these data evaluate morphological changes associated with cell potency and highlight new strategies for purification or alternatives to assessing MSC quality.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Novel method for effectively amplifying human peripheral blood T cells in vitro

The use of chimeric antigen receptor-modified T cells (CAR T cells) is an effective therapy for advanced cancer, especially hematological malignancies, and this method has attracted widespread attention in the last several years. The type, number and vitality of the effector cells clearly play important roles in this approach. In this study, to expand the possibility of curing cancer through adoptive cell therapy (ACT), we developed a novel method for effectively obtaining abundant T cells in vitro. The fusion proteins of three cytokines, SA-hIL-2, SA-hIL-7 and SA-hIL-21, were anchored onto biotin magnetic beads to increase the number of cytokines on the surface of the magnetic beads, which increased the local concentration of cytokines and thus promoted the binding of cytokines to T cells. Next, we examined the effects of these modified magnetic beads on the proliferation rate of T cells and CD19 CAR T cells. In this study, we report the expression and purification of the active bifunctional fusion proteins SA-hIL-2, SA-hIL-7 and SA-hIL-21, which were bound to biotin magnetic beads to develop a platform that was employed to increase the local concentration of cytokines. When the cells had been cultured for 14 days, the proliferation rate of the CD3{sup +} T cells in the group that received cytokine-coupled biotin magnetic beads (Beads-SA-CK) was higher than that of the cells in the groups that received soluble cytokines (Soluble-SA-CK) and that of the cells in the standard group (Standard-CK). We speculate that this difference may be the result of the increased expression of Bcl-2 and the increased phosphorylation of Stat5. Moreover, our results preliminarily indicate that compared with the other two treatments, Soluble-SA-CK and Standard-CK, adding cytokine-coupled biotin magnetic beads more effectively increases the proliferation rate of CD19 CAR-T cells. As expected, the CD19 CAR-T cells stimulated by Beads-SA-CK had a stronger anticancer effect than the cells stimulated by the other two treatments. An effective method of preparing abundant T cells in vitro was developed, and it may provide a novel strategy for ACT.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Evaluation of strategies to narrow the product chain-length distribution of microbially synthesized free fatty acids

The dominant strategy for tailoring the chain-length distribution of free fatty acids (FFA) synthesized by heterologous hosts is expression of a selective acyl-acyl carrier protein (ACP) thioesterase. However, few of these enzymes can generate a precise (greater than 90% of a desired chain-length) product distribution when expressed in a microbial or plant host. The presence of alternative chain-lengths can complicate purification in situations where blends of fatty acids are not desired. We report the assessment of several strategies for improving the dodecanoyl-ACP thioesterase from the California bay laurel to exhibit more selective production of medium-chain free fatty acids to near exclusivity. We demonstrated that matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-ToF MS) was an effective library screening technique for identification of thioesterase variants with favorable shifts in Journal Pre-proof chain-length specificity. This strategy proved to be a more effective screening technique than several rational approaches discussed herein. With this data, we isolated four thioesterase variants which exhibited a more selective FFA distribution over wildtype when expressed in the fatty acid accumulating E. coli strain, RL08. We then combined mutations from the MALDI isolates to generate BTE-MMD19, a thioesterase variant capable of producing free fatty acids consisting of 90% of C12 products. Of the four mutations which conferred a specificity shift, we noted that three affected the shape of the binding pocket, while one occurred on the positively charged acyl carrier protein landing pad. Lastly, we fused the maltose binding protein (MBP) from E. coli to the N – terminus of BTE-MMD19 to improve enzyme solubility and achieve a titer of 1.9 g per L of twelve-carbon fatty acids in a shake flask.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Carbon-conserving bioproduction of malate in an E. coli -based cell-free system

Formate, a biologically accessible form of CO 2 , has attracted interest as a renewable feedstock for bioproduction. However, approaches are needed to investigate efficient routes for biological formate assimilation due to its toxicity and limited utilization by microorganisms. Cell-free systems hold promise due to their potential for efficient use of carbon and energy sources and compatibility with diverse feedstocks. However, bioproduction using purified cell-free systems is limited by costly enzyme purification, whereas lysate-based systems must overcome loss of flux to background reactions in the cell extract. Here, we engineer an E. coli-based system for an eight-enzyme pathway from DNA and incorporate strategies to regenerate cofactors and minimize loss of flux through background reactions. We produce the industrial di-acid malate from glycine, bicarbonate, and formate by engineering the carbon-conserving reductive TCA and formate assimilation pathways. We show that in situ regeneration of NADH drives metabolic flux towards malate, improving titer by 15-fold. Background reactions can also be reduced 6-fold by diluting the lysate following expression and introducing chemical inhibitors of competing reactions. Together, these results establish a carbon-conserving, lysate-based cell-free platform for malate production, producing 64 μM malate after 8 h. This system conserves 43 % of carbon otherwise lost as CO 2 through the TCA cycle and incorporates 0.13 mol CO 2 equivalents/mol glycine fed. Finally, techno-economic analysis of cell-free malate production from formate revealed that the high cost of lysate is a key challenge to the economic feasibility of the process, even assuming efficient cofactor recycling. This work demonstrates the capabilities of cell-free expression systems for both the prototyping of carbon-conserving pathways and the sustainable bioproduction of platform chemicals.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Radiolabeling and in vitro studies of scandium-44 with HOPO chelator for PET imaging

44 Sc has been attracting interest as a clinically viable PET (positron emission tomography) imaging radionuclide due to its high positron branching ratio, 3.97 hour half-life, ideal positron energy of 632 keV and ability to be produced from a generator as well as from a cyclotron. Scandium is also of interest since the coordination is similar to the lanthanides and Ga 3+ that have demonstrated labeling methods. Further, 47 Sc (a potential therapeutic radionuclide) can serve as a matched isotope pair for theranostic applications. While the labeling studies of 44 Sc with DOTA and DOTA derivatives are quite extensive, there is little data on complexation of scandium with the chelator 3,4,3-(LI-1,2-HOPO). This ligand has been used successfully to radiolabel 89 Zr where it was shown to have high stability in vivo. Additionally, preliminary studies with 86 Y, and non-radioactive scandium show promising complexation constants similar to those found with DOTA derivatives. One major advantage of using HOPO is that radiolabeling can be achieved at room temperature while DOTA requires elevated temperatures, that may be detrimental when radiolabeling biomolecules. Radiolabeling of generator produced 44 Sc versus cyclotron produced 44 Sc is also under investigation as there are currently several different post-elution purification methods of generator 44 Sc, and the potential radiolabeling complications of these eluents has not yet been studied. This work focuses on radiolabeling HOPO with generator produced 44 Sc and the in vitro and radioanalytical evaluation of the resulting complexes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2020

Nanoparticle Tracking to Probe Transport in Porous Media

From the granular and fractured subsurface environment to highly engineered polymer membranes used in pharmaceutical purification, porous materials are ubiquitous in nature and industrial applications. In particular, porous media are used extensively in processes including water treatment, pharmaceutical sterilization, food/beverage processing and heterogeneous catalysis, where hindered mass transport is either essential to the process or a necessary, but undesirable limitation. Unfortunately, there are currently no universal models capable of predicting mass transport based on a description of the porous material because real porous materials are complex, and because many coupled dynamic mechanisms (e.g. adsorption, steric effects, hydrodynamic effects, electrostatic interactions, etc.) give rise to the observed macroscopic transport phenomena. While classical techniques, like nuclear magnetic resonance and dynamic light scattering, provide useful information about mass transport in porous media at the ensemble level, they provide limited insight into the microscopic mechanisms that give rise to complex phenomena such as anomalous diffusion, hindered pore-space accessibility, and unexpected retention under flow, among many others. To address this issue, we have developed refractive index matching imaging systems, combined with single-particle tracking methods, allowing the direct visualization of single particle motion within a variety of porous materials. Here, we summarize our recent efforts to advance the understanding of nanoparticle transport in porous media using single-particle tracking methods in both fundamental and applied scenarios. First, we describe the basic principles for two-dimensional and three-dimensional single-particle tracking in porous materials. Then, we describe concrete examples of nanoparticle transport in porous materials from two perspectives: (1) understanding fundamental elementary particle transport processes in porous media, including pore accessibility and cavity escape, which limit transport in porous media; (2) facilitating applications in industrial processes, e.g. by understanding the mechanisms of particle fouling and remobilization in filtration membranes. Finally, we provide an outlook of opportunities associated with investigating other types of mass transport in confined environments using single-particle tracking methods, including electrophoretic and self-propelled motion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Anisotropic Vapor-Deposited Glasses: Hybrid Organic Solids

CONSPECTUS: The term "organic solids" encompasses both crystals and glasses. Organic crystals are commonly grown for purification and structure determination and are being extensively explored for applications in organic electronics including field effect transistors. The ability to control the packing of one molecule relative to its neighbors is of critical importance for most uses of organic crystals. Often, anisotropic packing is also highly desirable as it enhances charge transport and optimizes light absorption/emission. When compared to crystals, the local packing in organic glasses is highly disordered and often isotropic. Glasses, however, offer two key advantages with respect to crystals. First, glasses typically lack grain boundaries and thus exhibit better macroscopic homogeneity. Second, glass composition can often be varied over a wide range while maintaining homogeneity. Besides electronic materials, many modern plastics used in a wide range of technologies are organic glasses, and the glassy state is being increasingly utilized to deliver pharmaceuticals because of higher bioavailability. In this article, we introduce vapor-deposited organic glasses as hybrid materials that combine some of the useful features of crystals and traditional liquid-cooled glasses. Physical vapor deposition produces glasses by directly condensing molecules from the gas phase onto a temperature-controlled substrate and allows film thickness to be controlled with nanometer precision. Just as liquid-cooled glasses, vapor-deposited glasses have smooth surfaces and lack grain boundaries. These attributes are critical for applications such as organic light emitting diodes (OLEDs), in which vapor-deposited glasses of organic semiconductors form the active layers. In common with crystals, vapor-deposited glasses can exhibit anisotropic packing, and the extent of anisotropy can be comparable to that of the typical organic crystal. For vapor-deposited glasses, in contrast to crystals, anisotropic packing can generally be controlled as a continuous variable. Deposition conditions can be chosen to produce glasses with significant molecular orientation (molecules "standing up" or "lying down" relative to the substrate), and pr-stacking can be directed along different directions relative to the substrate. Over the last five years, we have gained a fundamental understanding of the mechanism that controls the anisotropy of vapor-deposited glasses and learned how to control many aspects of anisotropic packing. Two key elements that enable such control are the high mobility present at the surface of an organic glass and the tendency of the surface to promote anisotropic packing of molecules. In contrast to traditional epitaxial growth, for vapor-deposited glasses, the free surface (not the substrate) acts as a template that controls the structure of a growing film. Lastly, the structure of any given layer is decoupled from those beneath it, thereby providing considerable freedom in producing layered glassy structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Simultaneous Separation of Protactinium-230 and Uranium-230 Isotopes from a Proton-Irradiated Thorium Matrix

The use of radioisotopes in cancer therapy is becoming increasingly important. As a potential candidate for targeted alpha therapy, 230 U (t 1/2 = 20.8 d), the decay daughter of 230 Pa (t 1/2 = 17.4 d) is currently being investigated for cancer treatment. For radioisotopes to be used in biomedicine, they must be radiochemically pure and free from carrier interference. This can be challenging given their short half-life. Thus, in this study, radiological separation methods for harvesting isotopes for use in biomedicine must be simple, fast, and capable of obtaining the required purity levels. Herein, we demonstrate a new rapid method for the separation of 230 U and 230 Pa from a proton-irradiated 232 Th metal target and from coproduced fission products with high recovery and purity. A dual-column approach was used, in which the first column was an anion exchange (AX) column and the second column was a DGA column. The MP-1 AX resin was used for the primary separation of the three major components (U, Pa, and Th, as well as fission products), and the DGA column was used for further purification of the separated 230 U. The method is simple and allows for straightforward separation of U, Pa, Th, and fission products; also, the entire process from target dissolution to shipment of 230 U could be completed in 3 days with an overall 230 U recovery yield of 96 ± 3%. Additionally, separated 230 Pa fractions can be used to harvest ingrown 230 U after initial separation.

DGA resin↗
DOE OSTI2026

Position-Specific Carbon Isotope Fingerprinting of Fluorinated Organics and Degradation Products

Fluorinated organic compounds are of growing environmental and forensic relevance due to their widespread use in pharmaceuticals, agrochemicals, and consumer products, their environmental persistence, and potential ecological and human health impacts. Elucidating their sources and transformation pathways is therefore a major focus of current research. Stable carbon isotope analysis provides a powerful approach for tracing molecular origins and linking parent compounds to degradation products. Recent isotope measurements have largely relied on mass-spectrometry techniques, which provide only an average isotope ratio across a compound. In this work, we employ a novel nuclear magnetic resonance (NMR) spectroscopy tool to determine position-specific carbon isotope ratios ( 13 C/ 12 C) in organofluorine compounds and their degradation products. This approach enables isotope measurements without combustion or extensive purification and, crucially, resolves ratios at individual carbon positions rather than bulk averages. The resulting intramolecular isotope fingerprints are unique to a molecule’s source. Applied to selected pharmaceuticals and pesticides, these fingerprints allow discrimination of chemically identical compounds. Moreover, we show that the 13 C/ 12 C signature at the fluorinated carbon persists through degradation, demonstrated for lansoprazole and fipronil. The 19 F NMR data produced for the 13 C/ 12 C analyses are also well suited for impurity profiling, providing an additional dimension for fingerprinting fluorinated organics. These findings suggest that position-specific isotope analysis can serve as part of a broader suite of tools for source characterization of organofluorine compounds and their breakdown derivatives, with potential applications in product validation, forensics, and linking these compounds to their breakdown products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Automated Separation of Uranium and Plutonium from Environmental Swipe Samples for Multiple Collector Inductively Coupled Plasma Mass Spectrometry

A fully automated method for the separation of low-concentration uranium from plutonium in environmental swipe samples has been developed. The offline chromatography system features renewable 1 mL Eichrom TEVA and UTEVA column generation from bulk resin slurry. Discrete fractions of the separated actinides are delivered into user defined vials for future analysis. Clean room background levels were achieved outside of a cleanroom environment with this method. Purification of uranium and plutonium from various sample matrixes and at various concentrations was successful. Major and minor isotope ratios for both elements were measured via multiple collector inductively coupled plasma mass spectrometry and were in good agreement with certified reference values. Lastly, validation of the separation method was conducted on archived environmental samples and agreed with values previously reported using standard column chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Method To Determine MgO and MgOHCl in Chloride Molten Salts

A commercial blend of mainly carnallite (KCl∙MgCl 2 ∙6H 2 O) is considered as a next-generation heat transfer fluid in solar thermal plants. Corrosive properties of MgCl2 hydrates must be addressed at the operating temperatures of 500-720 degrees C. For successful chemical monitoring of the carnallite heat transfer fluid, an experimental method was developed to separate and titrate for MgO and MgOHCl from solid carnallite. This new method was assessed for error and accuracy. The method's relative error for MgOHCl was -7.0% for a mass fraction of 9.0 wt % MgOHCl in the carnallite salt. The method's relative error for MgO was less than +1.0% for a mass fraction of 12.0 wt % MgO in the carnallite salt. Titration results were used to track changes in the MgOHCl concentration in carnallite salt through the carnallite's dehydration and purification.

14 SOLAR ENERGY↗
DOE OSTI2020

Functionalized Polymer Thin Films for Plutonium Capture and Isotopic Screening from Aqueous Sources

The rapid screening of plutonium from aqueous sources remains a critical challenge for nuclear nonproliferation efforts. The determination of trace-level Pu isotopes in water requires offsite sample preparation and analysis; therefore, new methods that combine plutonium purification, concentration, and isotopic screening in a fieldable detection system will provide an invaluable tool for nuclear safeguards. This contribution describes the development and characterization of thin polymer-ligand films for the isolation and concentration of waterborne Pu for direct spectroscopic analyses. Submicron thin films were prepared through spin coating onto Si wafers and consisted of combinations of polystyrene (PS) with dibenzoylmethane, thenoyltrifluoroacetone, and di(2-ethylhexyl)phosphoric acid (HDEHP). Pu uptake studies from solutions at pH from 2.3 to 6.3 indicated that only films containing HDEHP exhibited significant recovery of Pu. High alpha spectroscopy peak energy resolutions were achieved for PS-HDEHP films over a range of film thicknesses from 30 to 250 nm. Furthermore, a separate study was performed to evaluate uptake from a primarily Pu(V) solution where it was observed that doubling the HDEHP loading in the film increased uptake of Pu by an order of magnitude. X-ray photoelectron spectroscopy (XPS) analysis revealed that HDEHP was highly concentrated within the first few nanometers of the film at the higher loading. XPS analysis also revealed that, in the presence of water, HDEHP was stripped from the surface layer of the film at circumneutral pH. While significant losses of ligand were seen in all samples, higher loadings of HDEHP resulted in measurable amounts of ligand retained after a 12-h soak in water. Findings of this study are being used to guide the development of thin-film composite membrane-based detection methods for the rapid, fieldable analysis of Pu in water.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Efficient and Flexible Preparation of Biosynthetic Microperoxidases

Heme peptides and their derivatives, also called microperoxidases (MPs), are employed as heme protein active site models, catalysts, and charge-transfer chromophores. Here, two approaches to the biosynthesis of novel MPs are described. In one method, heme peptides are expressed as C-terminal tags to the protein azurin and the MP is liberated by proteolytic cleavage by an endopeptidase. In an alternative approach, heme peptides are expressed as N-terminal tags to the cysteine protease domain (CPD) of the Vibrio choleraeN/em> MARTX toxin. Once activated by inositol hexakisphosphate, CPD undergoes autocleavage at an N-terminal leucine residue to liberate the MP. Purification is aided by use of a histidine-immobilized Sepharose column that binds exposed heme [Asher, W. A., and Bren, K. L. (2010) Protein Sci. 19, 1830–1839]. These methods provide efficient and adaptable routes to the preparation of a wide range of biosynthetic heme peptides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗