Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PERMITTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Zn-Al layered double hydroxide prepared at different molar ratios: Preparation, characterization, optical and dielectric properties

The co-precipitation method was used to prepare Zn-Al-NO{sub 3}-LDH at different Zn{sup 2+}/Al{sup 3+} molar ratios (2, 3, 4, 5 and 6) and pH value of 7.5. The structure, textural, composition and morphological properties were investigated using powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) and scanning electron microscope (SEM), respectively. The crystallinity of LDH samples were found to improve as molar ratio decreased which is attributed to the distortion of the hydroxide layers networks of the LDH crystal by the larger difference in ionic radii of Zn{sup 2+} and Al{sup 3+}. The optical band gap energy of LDH samples were evaluated using absorbance data from UV-Vis-NIR Diffuse reflectance spectroscopy. Band gaps were affected by the variation of the Zn{sup 2+}/Al{sup 3+} molar ratio is due to the formation of the low crystalline phases (ZnO and ZnAl{sub 2}O{sub 4}). The water molecules and anionic NO{sub 3}{sup -} in the LDH interlayer were responsible for the generation of the dielectric response. This response can be described by an anomalous low frequency dispersion using the second type of Universal Power Law. The dominance of ZnO dipoles and charge carriers (NO{sub 3}{sup -} ions) in the dielectric relaxation increases with the increasing molar ratio. - Graphical abstract: (a) Schematic diagram of Zn-Al- NO{sub 3}-LDH shows the LDH structure, (b) Kubelka-Munk transformed reflectance spectra and c. The dielectric constant versus frequency of Zn-Al- NO{sub 3}-LDH samples. Highlights: Black-Right-Pointing-Pointer Zn-Al-NO{sub 3}-LDH was prepared at different Zn{sup 2+}/Al{sup 3+} molar ratios (2, 3, 4, 5 and 6). Black-Right-Pointing-Pointer The crystallinity of LDH phase decreased with increase of Zn{sup 2+}/Al{sup 3+} molar ratio. Black-Right-Pointing-Pointer The optical band gaps of LDH samples have been measured. Black-Right-Pointing-Pointer Dielectric response of LDH can be described by anomalous low frequency dispersion.

36 MATERIALS SCIENCE↗

First-principles study on stability, energy gaps, optical phonon and related parameters of In{sub 1-x-y}Al{sub x}Ga{sub y}As alloys

Based on the density functional theory as implemented in the Abinit code under the virtual crystal approximation, the lattice constant, bulk modulus, elastic constants, gap energies, electron effective mass, the dielectric constants and born effective charge in In{sub 1-x-y}Al{sub x}Ga{sub y}As have been calculated with both GGA and LDA in the range 0{<=}y{<=}0.9801. The optical and acoustical phonon frequencies, Froehlich coupling parameter, deformation energy and polaron effective mass are calculated and their dependence on the Ga content is examined. For AlAs, our results are in reasonable agreement with the known data in the literature; while for other contents our treatments are predictions. Highlights: Black-Right-Pointing-Pointer We predict phonon frequencies, Froehlich coupling and polaron parameters. Black-Right-Pointing-Pointer Elastic constants, gap energies, the dielectric constants and born effective charge are prediction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis dependent characteristics of Sr{sub 1-x}Mn{sub x}TiO{sub 3} (x=0.03, 0.05, 0.07 and 0.09)

Sr{sub 1-x}Mn{sub x}TiO{sub 3} (where x=0.03, 0.05, 0.07 and 0.09) was synthesized via different routes that include solid-state, oxalate precipitation and freeze drying. In oxalate precipitation technique, compositions corresponding to 3 and 5 mol% doping of Mn were monophasic whereas the higher compositions revealed the presence of the secondary phases such as MnO, Mn{sub 3}O{sub 4} etc., as confirmed by high resolution X-ray diffraction (XRD) studies. The decomposition behavior of the precursors prepared using oxalate precipitation method corresponding to the above mentioned compositions was studied. Nanopowders of compositions pertaining to 5 to 9 mol% of Mn doping were obtained using freeze-drying technique. The average crystallite size of these nanopowders was found to be in the 35 to 65 nm range. The microstructural studies carried out on the sintered ceramics, fabricated using powders synthesized by different routes established the fine grained nature (<1 {mu}m) of the one obtained by freeze drying method. Raman scattering studies were carried out in order to complement the observations made from XRD regarding the phase purity. The dielectric properties of the ceramics obtained by different synthesis routes were studied in the 80-300 K temperature range at 100 kHz and the effect of grain size has been discussed. - Graphical abstract: XRD patterns of Sr{sub 1-x}Mn{sub x}TiO{sub 3} (x=0.03 and 0.05) obtained by oxalate precipitation technique along with that of the nanopowders for x=0.05, 0.07 and 0.09 obtained by freeze drying method, microstructural characterization and synthesis dependent dielectric behavior. Highlights: Black-Right-Pointing-Pointer Monophasic samples obtained for compositions Sr{sub 1-x}Mn{sub x}TiO{sub 3} with x=0.03 and 0.05. Black-Right-Pointing-Pointer Nanopowders of Sr{sub 1-x}Mn{sub x}TiO{sub 3} with x=0.05, 0.07 and 0.09 were synthesized by freeze-drying method. Black-Right-Pointing-Pointer Phase purity of samples synthesized using freeze drying method were studied at different sintering temperatures. Black-Right-Pointing-Pointer Analysis of Raman spectra for samples prepared by both oxalate precipitation and freeze-drying. Black-Right-Pointing-Pointer Microstructure dependent dielectric characteristics have been illustrated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic and optical properties of TiCoSb under different pressures

The electronic structure and optical properties of TiCoSb are studied by the first-principles calculation. It is found that the band gaps increase with the pressure increasing. It is noted that the increase of the band gap is due to the electrons of Ti 3d and Co 3d of the valence band (VB) shifting away from the Fermi level. Our calculation indicates that TiCoSb has the large density of state near the Fermi level; moreover, the changes of the density of states near the Fermi level mainly are caused by Ti 3d and Co 3d under the different pressures. It is noted that the absorption edge increases with an increase of pressure. As pressure increases, the static dielectric constants {epsilon}{sub 1}(0) decrease. All peaks of the imaginary part of the dielectric function {epsilon}{sub 2}({omega}) move towards higher energies within increasing pressure. - Graphical abstract: The first peak positions of the absorption spectrum increase and shift the high energy with an increase of pressure. The buleshift of the absorption edge could be observed. Highlights: Black-Right-Pointing-Pointer It is noted that the increase of the band gap is due to the electrons of Ti 3d and Co 3d of VB moving away from the Fermi level. Black-Right-Pointing-Pointer It is noted that the absorption edge increases with an increase of pressure. Black-Right-Pointing-Pointer As pressure increases, the static dielectric constant {epsilon}{sub 1}(0) decreases. Black-Right-Pointing-Pointer All peaks of the imaginary part of the dielectric function {epsilon}{sub 2}({omega}) move to wards higher energies within creasing pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical prediction of the fundamental properties for the ternary Li{sub 2}PtH{sub 6} and Na{sub 2}PtH{sub 6}

Li{sub 2}PtH{sub 6} and Na{sub 2}PtH{sub 6} are good candidate for hydrogen storage. The structural, elastic, electronic and optical properties of Li{sub 2}PtH{sub 6} and Na{sub 2}PtH{sub 6} compounds have been investigated using pseudo-potential plane-wave method based on the density functional theory. Computed lattice constant and H atom positional parameter at equilibrium agree well with the available experimental data. A quadratic pressure dependence of the elastic stiffness is found. A set of isotropic elastic parameters and related properties, namely bulk and shear moduli, Young's modulus, Poisson's ratio, average sound velocity and Debye temperature are numerically estimated in the framework of the Voigt-Reuss-Hill approximation for Li{sub 2}PtH{sub 6} and Na{sub 2}PtH{sub 6} polycrystalline aggregate. The analyses of the band structure indicates that Li{sub 2}PtH{sub 6} and Na{sub 2}PtH{sub 6} are indirect gap semiconductors. The static dielectric constant and static refractive index are inversely proportional to the fundamental gap. Highlights: Black-Right-Pointing-Pointer We predict elastic moduli, energy gaps and optical parameters. Black-Right-Pointing-Pointer Electron effective mass is anisotropic. Black-Right-Pointing-Pointer Li{sub 2}PtH{sub 6} and Na{sub 2}PtH{sub 6} are indirect gap semiconductors. Black-Right-Pointing-Pointer The contribution to the optical spectra from main transitions are predicted.

36 MATERIALS SCIENCE↗

Crystal structures and microwave dielectric properties of Zn,W co-substituted BaTiO{sub 3} perovskite ceramics

Zn,W co-substituted BaTiO{sub 3} perovskite ceramics with compositions of Ba[Ti{sub 1-x}(Zn{sub 1/2}W{sub 1/2}){sub x}]O{sub 3} (x=0.40-1.00) were synthesized by the conventional solid-state reaction method and studied by X-ray diffraction and dielectric measurements. Their structures transferred from cubic (x=0.40) with space group Pm3{sup Macron }m to hexagonal (x=0.55-0.60) with P6{sub 3}/mmc, and then to cubic double pervoskite (x=1.00) with Fm3{sup Macron }m. The refinement results of sample (x=0.60) revealed that the negative and positive charge centers are not consistent with each other in the face-sharing oxygen octahedra. Compared with the cubic perovskites, the hexagonal ones had the increased quality factor (Q Multiplication-Sign f), the decreased dielectric constant ({epsilon}{sub r}), and especially the near-zero temperature coefficient of resonant frequency ({tau}{sub f}), whose absolute values were less than 5 ppm/ Degree-Sign C. The relationships between structures and properties were discussed. - Graphical abstract: The departure of the negative and positive charge centers in the face-sharing oxygen octahedra of hexagonal unit cell. Highlights: Black-Right-Pointing-Pointer A phase transition from simple cubic to hexagonal and then to cubic double pervoskite occurred. Black-Right-Pointing-Pointer Refinement results prove that spontaneous dipoles present in face-sharing oxygen octahedra. Black-Right-Pointing-Pointer Hexagonal perovskites had higher Q Multiplication-Sign f, nearer-zero {tau}{sub f}, and lower {epsilon}{sub r} than the cubic ones. Black-Right-Pointing-Pointer On the presence of the hexagonal perovskite, |{tau}{sub f}| was less than 5 ppm/ Degree-Sign C.

36 MATERIALS SCIENCE↗

Preparation and structural, optical, magnetic, and electrical characterization of Mn{sup 2+}/Co{sup 2+}/Cu{sup 2+} doped hematite nanocrystals

Pure and Mn{sup 2+} / Co{sup 2+} / Cu{sup 2+} doped (1 and 2 at.%) spherical hematite (α-Fe{sub 2}O{sub 3})nanocrystals have been synthesized by a simple solvothermal method using a domestic microwave oven. XRD measurements confirm that all the seven nanocrystals prepared consist of nanocrystalline hematite phase without any other phases. The energy dispersive X-ray and Fourier transform infrared spectral analyses confirm the phase purity of the nanocrystals prepared. TEM analysis shows the average particle sizes within the range 33–51 nm. Optical absorption measurements indicate that all the three dopants enhance the optical transmittance and reflectance. A red shift is observed in the bandgap energy values estimated from optical absorption and reflectance spectra. Results of magnetic measurements made at room temperature using a vibrating sample magnetometer indicate significant changes in the magnetic properties (coercivity, retentivity and saturationmagnetization) due to doping. Results of magnetic measurements indicate significant changes in the magnetic properties. Results of AC electrical measurements made at various temperatures in the range 40–130 °C and frequencies in the range 100 Hz –1 MHz indicate low dielectric constants and AC electrical conductivities and consequently show the occurrence of nanoconfined states. -- Graphical abstract: The indexed X-ray diffraction (XRD) patterns of all the seven nanocrystals indicate the rhombohedral structure of hematite (JCPDS card No.13-0534). No impurity phase like oxides of Mn or Co or Cu was detected above equipment limit. The average crystallite (grain) sizes estimated using the Scherrer's formula. Highlights: • Pure and Mn/Co/Cu-doped hematite nanocrystals have been prepared. • The method adopted for the preparation is simple, economical and scalable. • Prepared nanocrystals are spherical in shape with good crystallinity and phase purity. • Mn/Co/Cu-doping enhances the optical transmittance and ferromagnetic order. • Optical, magnetic and electrical properties tuned by Mn/Co/Cu-doping are explained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlling polymorphic structures and investigating electric properties of Ca-doped zirconia using solid state ceramic method

Structural study of Zr{sub 1−x}Ca{sub x}O{sub 2−x} samples with x=0.01–0.15 were prepared using solid state ceramic method. X-ray diffraction analysis revealed a mixture of the high temperature phase and the monoclinic one for the samples with x≤0.05. On the other hand, the formation of a single high temperature cubic phase was observed within a concentration range of x=0.06–0.10. At concentrations higher than 0.10 the calcium zirconate phase was observed besides the dominant high temperature one. Rietveld refinement of the single phase data clearly revealed, that substitution of zirconium by calcium increases both the lattice parameters as well as the tetrahedral bond length. Ionic to electronic conductivity ratio enhanced considerably as Ca-doping level ascends. The dielectric constant shows strong temperature dependence at lower frequencies. The dielectric loss factor increases rapidly with the increase in temperature at lower frequencies, while decreases with the increase in frequency at higher temperatures. The ionic conduction is considered as the dominant process at higher temperatures. - Graphical abstract: Forming a high temperature cubic zirconia phase at 1200 °C using ceramic solid state method and aliovalent cation. - Highlights: • Formation the high temperature cubic polymorph of zirconia using Ca-doping. • Solid state ceramic method was used for preparing the cubic Ca-doped zirconia. • Substitution of zirconium by calcium increases the lattice parameters and the bond length. • Ionic to electronic conductivity ratio enhanced considerably as Ca-doping level increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monoclinically distorted perovskites, A{sub 2}ZnTiO{sub 6} (A=Pr, Gd): Rietveld refinement, and dielectric studies

Double perovskite related oxide A{sub 2}ZnTiO{sub 6}A=Pr, Gd were synthesized by the solid state reaction method at 1523 K. The structure and microstructure of the compounds were studied by X-ray, SAED and FESEM. Rietveld refinement of the powder X-ray analysis shows that the compounds crystallizes in monoclinic space group P2{sub 1}/n (a{sup +}b{sup −}b{sup −}) with unit cell parameter √2a{sub p}×√2a{sub p}×2a{sub p} (a=5.5026(1) Å, b=5.6305(1) Å, c=7.8149(1) Å, β=90.02(1)° for Pr{sub 2}ZnTiO{sub 6} and a=5.3621(1) Å, b=5.6565(2) Å, c=7.6779(2) Å and β=90.264(2)° for Gd{sub 2}ZnTiO{sub 6}. Electron diffraction study confirms P2{sub 1}/n symmetry of the oxides. The monoclinic distortion is larger in Gd{sub 2}ZnTiO{sub 6} than Pr{sub 2}ZnTiO{sub 6} which is associated with the tolerance factor and the tilting angle of ZnO{sub 6} and TiO{sub 6} octahedra (ϕ=13.64° for Pr{sub 2}ZnTiO{sub 6} and 16.51° for Gd{sub 2}ZnTiO{sub 6}). The compounds are highly ordered. The charge and size difference between B site cations are the driving force for the ordering of the B′O{sub 6} and B″O{sub 6} octahedra. Pr{sub 2}ZnTiO{sub 6} shows a dielectric constant of 27 and dielectric loss of 0.003 while Gd{sub 2}ZnTiO{sub 6} has a dielectric constant of 17 and dielectric loss of 0.005 measured at 1 MHz. - Graphical abstract: Synthesis of new double perovskite dielectric material with very low dielectric loss. - Highlights: • Synthesis of new monoclinically distorted double perovskite (Pr{sub 2}ZnTiO{sub 6}). • Synthesis of monoclinically distorted double perovskite (Gd{sub 2}ZnTiO{sub 6}). • Selected area electron diffraction study of A{sub 2}ZnTiO{sub 6} (A=Pr, Gd). • Study of dielectric properties of A{sub 2}ZnTiO{sub 6} (A=Pr, Gd)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combined experimental and theoretical assessments of the lattice dynamics and optoelectronics of TaON and Ta{sub 3}N{sub 5}

Presented herein is a detailed discussion of the properties of the lattice dynamic and optoelectronic properties of tantalum(V) oxynitride (TaON) and tantalum(V) nitride (Ta{sub 3}N{sub 5}), from experimental and theoretical standpoint. The active Raman and infra red (IR) frequencies of TaON and Ta{sub 3}N{sub 5} were measured using confocal Raman and Fourier Transform Infrared spectroscopies (FTIR) and calculated using the linear response method within the density functional perturbation theory (DFPT). The detailed study leads to an exhaustive description of the spectra, including the symmetry of the vibrational modes. Electronic structures of these materials were computed using DFT within the range-separated hybrid HSE06 exchange–correlation formalism. Electronic and ionic contributions to the dielectric constant tensors of these materials were obtained from DFPT within the linear response method using the PBE functional. Furthermore, effective mass of photogenerated holes and electrons at the band edges of these compounds were computed from the electronic band structure obtained at the DFT/HSE06 level of theory. The results suggest that anisotropic nature in TaON and Ta{sub 3}N{sub 5} is present in terms of dielectric constant and effective masses. - Graphical abstract: Detailed investigation has been conducted from combined experimental and theoretical approaches on Raman and IR spectroscopies, electronic structures, dielectric constants and effective masses of TaON and Ta{sub 3}N{sub 5}. - Highlights: • Crystal structures of TaON and Ta{sub 3}N{sub 5} are discussed based on XRD and DFT calculation. • Raman and IR spectra of TaON and Ta{sub 3}N{sub 5} materials are measured and computed by DFPT method. • Optoelectronic properties of TaON and Ta{sub 3}N{sub 5} are discussed. • Dielectric constant and effective masses of TaON and Ta{sub 3}N{sub 5} are calculated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure study of dielectric oxynitride perovskites La{sub 1−x}Sr{sub x}TiO{sub 2+x}N{sub 1−x} (x=0, 0.2)

As is the case with SrTaO{sub 2}N, both cis-ordering of nitride anions and octahedral titling are also preferable in La{sub 1−x}Sr{sub x}TiO{sub 2+x}N{sub 1−x} (x=0, 0.2) oxynitride perovskites. A larger dielectric constant of ε{sub r}≈5.0×10{sup 3} was estimated for the pure oxynitride with x=0.2, compared with ε{sub r}≈750 for the product with x=0, by extrapolating the ε{sub r} values obtained from powders mixed with paraffin at various mixing ratios. The crystal structure of x=0.2 with larger tolerance factor than x=0 increased the octahedral tilting, which contributes to the increased dielectric constant. The increased dielectric constant supports the exchange mechanism for the dielectric property between two kinds of –Ti–N– helical coils (clockwise and anticlockwise) derived from the above cis-ordering of nitride anions. - Graphical abstract: Very large dielectric constant values were estimated for La{sub 1−x}Sr{sub x}TiO{sub 2+x}N{sub 1−x}; ε{sub r}≈5.0×10{sup 3} in x=0.2 and ε{sub r}≈750 in x=0. - Highlights: • Cis-configuration of nitride anions was confirmed in La{sub 1−x}Sr{sub x}TiO{sub 2+x}N{sub 1−x} (x=0, 0.2). • Dielectric constant values were estimated to be 750 for x=0 and 5.0×10{sup 3} for x=0.2, respectively. • The large dielectric property is to the exchange mechanism between clockwise and anticlockwise –Ti–N– coil motifs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization, sintering and dielectric properties of nanocrystalline barium titanate synthesized through a modified combustion process

Nanocrystalline barium titanate has been synthesized through a modified combustion process in a single step for the first time. The as-prepared barium titanate powder is cubic perovskite with lattice constant a = 4.018 A. The phase purity of the nanopowder was examined using thermo gravimetric analysis, differential thermal analysis and Fourier transform infrared spectroscopy. Transmission electron microscopic investigations have shown that the particle size of the as-prepared powder is in the range 20-40 nm. The agglomerate size distribution of the as-prepared powder was studied using atomic force microscopy. The nanoparticles of barium titanate were sintered to 97% of the theoretical density at a temperature of 1350 deg. C for 3 h. The microstructure of the sintered surface was examined using scanning electron microscopy. The dielectric constant and loss factor of the sintered pellets at 1 MHz measured at room temperature were 1223 and 3.5 x 10{sup -3} respectively.

36 MATERIALS SCIENCE↗

Synthesis and characterization of low softening point high Bi{sub 2}O{sub 3} glasses in the K{sub 2}O-B{sub 2}O{sub 3}-Bi{sub 2}O{sub 3} system

Synthesis of a new series of lead free low softening point (< 470 deg. C) high Bi{sub 2}O{sub 3} (40-90 mol%) glasses in the K{sub 2}O-B{sub 2}O{sub 3}-Bi{sub 2}O{sub 3} system by the melt-quench technique has been demonstrated here. Their structural, optical, thermal, electrical and other physical properties have been evaluated by X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), FT-infrared reflection (FTIRR) spectroscopy, UV-Visible spectroscopy, dilatometer, LCR meter, etc. techniques. The glass softening point, glass transition temperature and glass deformation temperature are found to vary in the ranges 410-465 deg. C, 354-409 deg. C and 376-427 deg. C respectively which are found to correlate well with the boron anomaly phenomenon (as revealed by FTIRRS) with gradual addition of Bi{sub 2}O{sub 3} in the glass matrix. The coefficient of thermal expansion shows a decreasing trend from 153 down to 109 x 10{sup -7} K{sup -1} whereas the dielectric constant increases from 21 to 34 with the increase in Bi{sub 2}O{sub 3} content. The theoretical optical basicity is found to increase from 0.93 to 1.15 while the optical band gap decreases from 2.86 down to 2.30 eV with the addition of Bi{sub 2}O{sub 3}. The formation of metallic bismuth in these glasses during melting in air has been confirmed by the XRD, TEM, selected area electron diffraction (SAED) and high resolution TEM (HRTEM) analyses. The formation of a Bi{sub 2}O{sub 3} rich secondary phase in the glasses and their particle size distribution have been examined by the FESEM photomicrograph analysis. - Research Highlights: {yields} Synthesis of low softening point (< 470 deg. C) high Bi{sub 2}O{sub 3} content (40-90 mol%) glasses. {yields} Study of boron anomaly phenomenon with gradual addition of Bi{sub 2}O{sub 3} in the glass. {yields} Co-efficient of thermal expansion decreases from 153 to 109 x 10{sup -7} K{sup -1}. {yields} Dielectric constant increases from 21 to 34 with increase in Bi{sub 2}O{sub 3} content. {yields} Formation of metallic bismuth in the glass confirmed by the XRD and TEM analyses.

36 MATERIALS SCIENCE↗

Electrical properties of lanthanum doped barium titanate ceramics

Pure and lanthanum doped barium titanate (BT) ceramics were prepared by sintering pellets at 1300 deg. C for 8 h, obtained from nanopowders synthesized by the polymeric precursor method. XRD results showed formation of a tetragonal structure. The presence of dopants changed the tetragonal structure to pseudo-cubic. The polygonal grain size was reduced up to 300 nm with addition of lanthanum as a donor dopant. Determined dielectric properties revealed that lanthanum modified BT ceramics possessed a diffused ferroelectric character in comparison with pure BT that is a classical ferroelectric material. In doped BT phase transition temperatures were shifted to lower temperatures and dielectric constant values were much higher than in pure BT. A modified Currie Weiss law was used to explore the connection between the doping level and degree of diffuseness of phase transitions. Impedance spectroscopy measurements were carried out at different temperatures in order to investigate electrical resistivity of materials and appearance of a PTCR effect. - Highlights: {yields} Pure and lanthanum doped BaTiO{sub 3} were prepared by polymeric precursors method. {yields} Change of structure from tetragonal to pseudo-cubic. {yields} Lanthanum as a donor dopant influenced on change of ferro-para phase transition. {yields} The diffuseness factor indicated the formation of diffuse ferroelectric material. {yields} Lanthanum affected on PTCR effect appearance in BT ceramics.

36 MATERIALS SCIENCE↗

Production of Ba(Zn{sub 1/3}Nb{sub 2/3})O{sub 3} ceramic by coprecipitation

A simple coprecipitation technique was successfully applied for the preparation of pure, nanosized, single phase Ba(Zn{sub 1/3}Nb{sub 2/3})O{sub 3} microwave dielectric ceramic powders. Barium, zinc and niobium ions were precipitated as hydroxide under basic conditions using aqueous sodium hydroxide solution and single phase Ba(Zn{sub 1/3}Nb{sub 2/3})O{sub 3} ceramic was produced at 800 Degree-Sign C. TEM revealed an average particle size of around 100 nm for the calcined powders. The samples sintered at 1250 Degree-Sign C for 4 h had a relatively high density and fine grain sizes. While the dielectric constant of ceramics varied between 37.5 and 39.8 the dielectric losses were lower than 4 Multiplication-Sign 10{sup -3} at frequency range of 1 kHz-2 MHz between 20 and 200 Degree-Sign C. - Highlights: Black-Right-Pointing-Pointer Production of BZN by coprecipitation. Black-Right-Pointing-Pointer Nanoscale BZN powder. Black-Right-Pointing-Pointer Dielectric properties of BZN.

36 MATERIALS SCIENCE↗

Nanocrystalline non-stoichiometric SBT: Effect of milling duration on structural and electrical characteristics

In the present work, nanocrystalline specimens of non-stoichiometric Strontium Bismuth Tantalate (SBT) ferroelectric ceramics were synthesized by mechanical activation process using a high energy planetary ball mill. The powders were milled for different milling durations (5, 10, 20 h) keeping the milling speed fixed at 300 rpm. Microstructural characterizations have been performed using X-ray diffraction, scanning electron microscopy, electron diffraction and transmission electron microscopy. Nanocrystallites with average grain size in the range of 30-50 nm are observed to be formed. Grain size is observed to decrease with increasing milling duration. Detailed dielectric study as a function of temperature has been carried out. It is observed that dielectric constant increases and dielectric loss decreases with increasing milling duration. The observed characteristics have been explained in terms of increased number of grain boundaries due to the reduction of granular size. - Highlights: Black-Right-Pointing-Pointer In the present work nano crystalline non-stoichiometric SBT has been synthesized. Black-Right-Pointing-Pointer The technique involved is mechanical activation (high energy ball milling). Black-Right-Pointing-Pointer The milling duration has been optimized. Black-Right-Pointing-Pointer Sr0.8Bi2.2Ta2O9 milled for 20 hours exhibit enhanced electrical characteristics.

36 MATERIALS SCIENCE↗

Electrical and optical properties of NdAlO{sub 3} synthesized by an optimized combustion process

Nanocrystals of neodymium aluminate (NdAlO{sub 3}) are synthesized using an optimized single step auto-ignition citrate complex combustion process. The combustion product was characterized by X-ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy and Ultraviolet–visible reflection spectroscopy. The combustion product is single phase and composed of aggregates of nanocrystals of sizes in the range 20–40 nm. The NdAlO{sub 3} crystallized in rhombohedral perovskite structure with lattice parameters a = 5.3223 Å and c = 12.9292 Å. The absorption spectrum of the NdAlO{sub 3} nanocrystals shows characteristic absorption bands of the Nd atom. The polycrystalline fluffy combustion product is sintered to high density (∼ 97%) at ∼ 1450 °C for 4 h and the microstructure was characterized by scanning electron microscopy. The electrical properties of the sintered product were studied using dielectric measurements. The sintered NdAlO{sub 3} has a dielectric constant (ε{sub r}) and a dielectric loss (tan δ) of 21.9 and ∼ 10{sup −3} at 5 MHz, respectively. - Highlights: • NdAlO{sub 3} nanocrystals were synthesized through a citrate combustion process. • The nanocrystals were sintered to ∼ 97% of theoretical density. • The materials were characterized using a number of analytical techniques. • Nanostructured NdAlO{sub 3} showed crystal field splitting of Nd ions. • Dielectric properties of the sintered NdAlO{sub 3} ceramics were studied.

36 MATERIALS SCIENCE↗

Influence of pH on the physical and electromagnetic properties of Mg–Mn ferrite synthesized by a solution combustion method

The synthesis of nano-crystalline Mg–Mn ferrites by a solution combustion method using citric acid and ammonia was investigated by varying the pH of the precursor solution, which played an important role in controlling the morphology of the synthesized powders. The phase formation, microstructure and electromagnetic properties were studied using X-ray diffraction, scanning electron microscopy, impedance analyzer and vibrating sample magnetometer. Single phase pure spinel Mg–Mn ferrite powders were obtained for all the samples at different pH (< 1, 3, 5, 7, 9). The results showed that an increase of pH improves the crystallinity of the Mg–Mn ferrite nanoparticles. The average grain size of sintered samples was found to decrease from 2 μm to 0.5 μm with increasing pH values from pH < 1 to pH 9, respectively. The dielectric constant of the samples with different pH is in the range of 7–12 from frequencies of 1 MHz to 1 GHz. The highest saturation magnetization (30.04 emu/g) was obtained for the sample with pH < 1. - Highlights: • Mg–Mn ferrites were synthesized by a solution combustion method with different pH. • Auto-combustion process resulted in the formation of single phase spinel ferrite. • An increase of pH improves the crystallinity of the Mg–Mn ferrite nanoparticles. • pH variation has influence on phase formation and morphology of the ferrite.

36 MATERIALS SCIENCE↗