Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Controlled synthesis and ordered assembly of Co 3 O 4 nanowires using genetically engineered bacterial flagella as biotemplates (Final Technical Report)

The major goals of the project are to gain a fundamental understanding on the influence of the displayed peptides and other processing parameters on the flagella assembly and the resulting biomimetic control over the synthesis and assembly of Co 3 O 4 nanoparticles (NPs) and nanowires (NWs). To pursue these goals, we designed two specific aims: Aim 1: Understanding the self-assembly of genetically engineered flagella and its outcome for site-specific nucleation and growth of Co 3 O 4 NPs and NWs. Aim 2: Understanding controllable alignment of 1D Co 3 O 4 -flagella NWs into highly ordered 2D and 3D structures.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

The Costs and Feasibility of Floating Offshore Wind Energy in the O'ahu Region

The State of Hawai'i has set a target to achieve a 100% Renewable Portfolio Standard (RPS) by 2045, and is well suited to become the first state to achieve this goal due to its relatively small load, high electricity prices, heavy reliance on imported fossil fuels, and favorable conditions for wind and solar. The Bureau of Ocean Energy Management contracted NREL to conduct a cost and feasibility study to provide information to decision makers on Hawai'i about the viability of floating offshore wind to be a part of the 100% RPS. We used NREL's Offshore Regional Cost Analyzer (ORCA) spatial cost model to evaluate the Levelized Cost of Energy (LCOE) in the region surrounding O'ahu as this is the island with the highest energy demand. The ORCA results showed that LCOE could range from around $\$$83 MWh to $\$$194 MWh for commercial operation dates in 2019 but has the potential to decrease to $\$$48 MWh - $\$$109 MWh by 2032 due to maturing global supply chains, increasing turbine rating, and new technological innovations. These costs are expected to be competitive with global floating wind costs in the early 2030s. The strong wind resource, proximity to infrastructure on land, and benign metocean conditions can potentially compensate for the logistical complexities of installing projects in Hawai'i far from mainland supply chains if sufficient investments are made to develop ports, grid infrastructure, and workforce on O'ahu to support the construction and operation of offshore wind projects. In addition to the cost results, this report also discusses the likely technologies that would comprise floating wind projects near O'ahu, the existing infrastructure available to projects, unique conditions facing offshore wind in the region such as exposure to hurricanes and limits on allowable export cable capacity, newly developed wind resource data sets for the region, and local stakeholder perspectives on offshore wind.

17 WIND ENERGY↗
DOE OSTI2022

Impact of annealing at 1000°C in flowing He with low O 2 concentration on the room temperature tensile properties of Mo alloys

NorthStar is developing an accelerator-based technology to produce the medical isotope Mo-99. A previous ORNL report (ORNL/SPR-2022/2490) studied the oxidation behavior of Mo in flowing He with low oxygen content at 800°C and 1000°C and it was shown that an O 2 concentration lower than ~5ppm (μ1/1) is required to achieve acceptable oxidation rates for wrought or powder metallurgy (PM) Mo. Oxidation may also impact the mechanical properties of Mo and this report summarizes tensile results at room temperature on wrought and PM Mo before and after exposure at 1000°C in flowing He with O 2 concentration varying from 1 to 15 ppm O 2 . It was found that oxidation at 1000°C results in a significant decrease of Mo strength and ductility with brittle intergranular fracture surfaces, likely due to the segregation of oxygen at grain boundaries. For the PM Mo material, the decrease in strength and ductility was also observed after annealing in vacuum at 1000°C, indicating that the diffusion of the oxygen trapped in the material pores to grain boundaries after 20-100h at 1000°C is sufficient to embrittle the material. Finally, initial results on actual aMo and high-density disks provided by NorthStar revealed the lack of ductility of the materials due to the specific disk microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2024

IER-580 CED-3b: Experiment Execution Summary for the Pulsed-Neutron Die-Away Experiments (PNDA) with H 2 O

This report summarizes new experiments performed with H 2 O for IER-580, a testbed for pulsed-neutron die-away (PNDA) experiments at Lawrence Livermore National Laboratory (LLNL). The experiments will become high-quality benchmarksthat serve to optimize and validate thermal neutron scattering laws (TSLs) of H 2 O, which are high-priority nuclear data for the Department of Energy’s Nuclear Criticality Safety Program (NCSP). The report presents the details of the measurements conducted in October of 2023, including the experimental set-up (PNDA equipment and H 2 O targets) and all experimentally measured data. The report gives the fitted decay constants for the die-away curves of each target sample. It also provides the tabulated data for the die-away curves in the appendices.

42 ENGINEERING↗
DOE OSTI2023

Build-to-Replace: A New Paradigm for Reducing Advanced Reactor O&M Costs

Nuclear energy is a carbon free source of reliable, resilient, and dispatchable energy that has the potential to feature prominently in a future energy mix. To this end, many new reactor designs are being developed to help reduce cost and improve safety. Operating and maintenance (O&M) costs can make up a significant portion of lifecycle costs. Traditional approaches for nuclear plant design O&M is to perform significant inspections and testing of plant equipment to extend the life of equipment as long as possible. This is contrasted with approaches used in other industries where equipment is replaced when it is no longer functional in lieu of spending time and resources on maintenance. This research investigated the “build-to-replace” approach for new nuclear power plants. A methodology was developed to evaluate the effectiveness of the “build-to-replace” approach. Several scenarios were developed and analyzed using the approach. Modest reductions in O&M costs were obtained in some cases.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Investigating the Impact of Absorbed Surface Impurities (CO, CO 2 , CH 4 , and H 2 O) on Getter Rate Performance

This report provides an overview of engineering and experimental efforts to establish a new capability for measuring H2 uptake rates for Tritium Producing Abosrber Rod (TPBAR) getter materials. This new system was used to gain a better understanding of the impact of contaminant species (CO 2 , CO, CH 4 , and H 2 O) on getter performance under relevant hydrogen uptake conditions (350 °C, 20 torr). Herein, we successfully established a high-resolution gravimetric sorption (HRGS) system in a flow through configuration that can measure sample mass changes with high resolution (1 µg or 10 µg) over long experiment times (days), high temperature, and varying pressures. We coupled this capability with an in-line universal gas analyzer (UGA) system to characterize potential surface chemistry side reactions occurring after contaminant gas exposure. The major findings of this study suggest that methane and CO have the most detrimental effects on getter H 2 uptake performance showing large changes in rate after exposure compared to CO 2 and water. The effect of these contaminant species did not influence getter sample capacity (~ 1.8 wt% H 2 ). After CO and methane exposure, changes in getter rate were accompanied by observable Ni-surface defects and pinholes via SEM imaging suggesting possible Ni- layer corrosion. Additionally, the increase in C and O signal in the zircaloy layer, observed via EDX, point to C and O species transport through the getter sample resulting in the formation of carbides and oxide species. Thus, co-exposure studies where mixed gases or water vapor are introduced together will be important to further understand what mechanisms are contributing to Ni-layer corrosion and changes in getter performance.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The Elastic Properties of β-Mg 2 SiO 4 Containing 0.73 wt.% of H 2 O to 10 GPa and 600 K by Ultrasonic Interferometry with Synchrotron X-Radiation

Here, we measured the elastic velocities of a synthetic polycrystalline β-Mg 2 SiO 4 containing 0.73 wt.% H 2 O to 10 GPa and 600 K using ultrasonic interferometry combined with synchrotron X-radiation. Third-order Eulerian finite strain analysis of the high P and T data set yielded K so = 161.5(2) GPa, G o = 101.6(1) GPa, and (∂K s /∂P) T = 4.84(4), (∂G/∂P) T = 1.68(2) indistinguishable from K so = 161.1(3) GPa, G o = 101.4(1) GPa, and (∂K s /∂P) T = 4.93(4), (∂G/∂P) T = 1.73(2) from the linear fit. The hydration of the wadsleyite by 0.73 wt.% decreases K s and G moduli by 5.3% and 8.6%, respectively, but no measurable effect was noted for (∂K s /∂P) T and (∂G/∂P) T . The temperature derivatives of the K s and G moduli from the finite strain analysis (∂K S /∂T) P = –0.013(2) GPaK –1 , (∂G/∂T) P = –0.015(0.4) GPaK –1 , and the linear fit (∂K S /∂T) P = –0.015(1) GPaK –1 , (∂G/∂T) P = –0.016(1) GPaK –1 are in agreement, and both data sets indicating the |(∂G/∂T) P | to be greater than |(∂K S /∂T) P |. Calculations yield ΔV p(α-β) = 9.88% and ΔV S(α-β) = 8.70% for the hydrous β-Mg 2 SiO 4 and hydrous α-Mg 2 SiO 4 , implying 46–52% olivine volume content in the Earth’s mantle to satisfy the seismic velocity contrast ΔV s = ΔV P = 4.6% at the 410 km depth.

58 GEOSCIENCES↗
DOE OSTI2024

Structure-Related Electronic and Magnetic Properties in Ultrathin Epitaxial Ni x Fe 3–x O 4 Films on MgO(001)

Off-stoichiometric Ni x Fe 3–x O 4 ultrathin films (x < 2.1) with varying Ni content x and thickness 16 (±2) nm were grown on MgO(001) by reactive molecular beam epitaxy. Synchrotron-based high-resolution X-ray diffraction measurements reveal vertical compressive strain for all films, resulting from a lateral pseudomorphic adaption of the film to the substrate lattice without any strain relaxation. Complete crystallinity with smooth interfaces and surfaces is obtained independent of the Ni content x. For x < 1 an expected successive conversion from Fe 3 O 4 to NiFe 2 O 4 is observed, whereas local transformation into NiO structures is observed for films with Ni content x > 1. However, angle-resolved hard X-ray photoelectron spectroscopy measurements indicate homogeneous cationic distributions without strictly separated phases independent of the Ni content, while X-ray absorption spectroscopy shows that also for x > 1, not all Fe 2+ cations are substituted by Ni 2+ cations. The ferrimagnetic behavior, as observed by superconducting quantum interference device magnetometry, is characterized by decreasing saturation magnetization due to the formation of antiferromagnetic NiO parts.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electrical Behavior of Combinatorial Thin-Film Zr x Ta 1−x O y

Combinatorial magnetron sputtering and electrical characterization were used to systematically study the impact of compositional changes in the resistive switching of transition metal oxides, specifically the Zr x Ta 1−x O y system. Current-voltage behavior across a range of temperatures provided insights into the mechanisms that contribute to differences in the electrical conductivity of the pristine Ta 2 O 5 and ZrO 2 , and mixed Zr x Ta 1−x O y devices. The underlying conductive mechanism was found to be a mixture of charge trapping and ionic motion, where charge trapping/emission dictated the short-term cycling behavior while ion motion contributed to changes in the conduction with increased cycling number. ToF-SIMS was used to identify the origin of the “wake-up” behavior of the devices, revealing an ionic motion contribution. This understanding of how cation concentration affects conduction in mixed valence systems helps provide a foundation for a new approach toward manipulating resistive switching in these active layer materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Anisotropic electrical properties of NiO x /β-Ga 2 O 3 p-n heterojunctions on (2̅01), (001), and (010) crystal orientations

Abstract NiO x / β -Ga 2 O 3 p-n heterojunctions fabricated on ( 2 ̅ 01 ) , ( 001 ) , and ( 010 ) β -Ga 2 O 3 substrates show distinctly anisotropic electrical properties. All three devices exhibited excellent rectification ≥10 9 , and turn-on voltages >2.0 V. The ( 010 ) device showed very different turn-on voltage, specific on-resistance, and reverse recovery time compared with ( 2 ̅ 01 ) and ( 001 ) devices. Moreover, it is calculated that the interface trap state densities for ( 2 ̅ 01 ) , ( 001 ) , and ( 010 ) plane devices are 4.3 × 10 10 , 7.4 × 10 10 , and 1.6 × 10 11 eV –1 cm –2 , respectively. These differences in the NiO x / β -Ga 2 O 3 heterojunctions are attributed to the different atomic configurations, the density of dangling bonds, and interface trap state densities.

Physics↗
DOE OSTI2024

Polarization-dependent photoluminescence of Ce-implanted MgO and MgAl 2 O 4

Since the qubit's performance of solid-state spin centers depends highly on the host material, spin centers using new host materials may offer new qubit applications. We investigate the optical properties of Ce-implanted MgO and MgAl 2 O 4 as potential materials holding the optically accessible qubit. We find that the photoluminescence of Ce-implanted MgAl 2 O 4 is more than 10 times brighter than that of Ce-implanted MgO and observe polarization-dependent emission of Ce center in MgAl 2 O 4 with 2% at 4 K under 500 mT, suggesting that the properties required for initializing and reading the state of the spin qubit have been achieved.

42 ENGINEERING↗
DOE OSTI2020

Using the Baryonic Tully–Fisher Relation to Measure H{sub o}

We explore the use of the baryonic Tully–Fisher relation (bTFR) as a new distance indicator. Advances in near-IR imaging and stellar population models, plus precise rotation curves, have reduced the scatter in the bTFR such that distance is the dominant source of uncertainty. Using 50 galaxies with accurate distances from Cepheids or the tip magnitude of the red giant branch, we calibrate the bTFR on a scale independent of H {sub o}. We then apply this calibrated bTFR to 95 independent galaxies from the SPARC sample, using CosmicFlows-3 velocities, to deduce the local value of H {sub o}. We find H {sub o} = 75.1 ± 2.3 (stat) ±1.5 (sys) km s{sup −1} Mpc{sup −1}.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

K-shell Emission from O vi Near 19 Å

Abstract Laboratory measurements of O vi K-shell emission lines are presented that are situated near the O viii Ly α line at 19 Å. The data provide additional rest-frame references for velocity determinations based on absorption features in the spectra of warm absorbers in active galactic nuclei and other astrophysical objects. They also provide benchmarks for testing atomic structure calculations of energy levels with electrons in a high principal quantum number ( n = 3, 4). Excellent agreement is found with our calculations using the many-body perturbation theory method, and we provide a complete listing of the O vi energy levels calculated with this approach.

Beiersdorfer, Peter (ORCID:000000030127599X)↗
DOE OSTI2024

DESI Emission-line Galaxies: Unveiling the Diversity of [O II ] Profiles and Its Links to Star Formation and Morphology

We study the [O II ] profiles of emission-line galaxies (ELGs) from the Early Data Release of the Dark Energy Spectroscopic Instrument (DESI). To this end, we decompose and classify the shape of [O II ] profiles with the first two eigenspectra derived from principal component analysis. Our results show that DESI ELGs have diverse line profiles, which can be categorized into three main types: (1) narrow lines with a median width of ∼50 km s −1 , (2) broad lines with a median width of ∼80 km s −1 , and (3) two redshift systems with a median velocity separation of ∼150 km s −1 , i.e., double-peak galaxies. To investigate the connections between the line profiles and galaxy properties, we utilize the information from the COSMOS data set and compare the properties of ELGs, including star formation rate (SFR) and galaxy morphology, with the average properties of reference star-forming galaxies with similar stellar mass, sizes, and redshifts. Our findings show that, on average, DESI ELGs have a higher SFR and more asymmetrical/disturbed morphology than the reference galaxies. Moreover, we uncover a relationship between the line profiles, the excess SFR, and the excess asymmetry parameter, showing that DESI ELGs with broader [O II ] line profiles have more disturbed morphology and higher SFR than the reference star-forming galaxies. Finally, we discuss possible physical mechanisms giving rise to the observed relationship and the implications of our findings on the galaxy clustering measurements, including the halo occupation distribution modeling of DESI ELGs and the observed excess velocity dispersion of the satellite ELGs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

DESI Emission-line Galaxies: Clustering Dependence on Stellar Mass and [O II] Luminosity

We measure the projected two-point correlation functions of emission-line galaxies (ELGs) from the Dark Energy Spectroscopic Instrument One-Percent Survey and model their dependence on stellar mass and [O II] luminosity. We select ∼180,000 ELGs with redshifts of 0.8 < z < 1.6, and define 27 samples according to cuts in redshift and both galaxy properties. Following a framework that describes the conditional [O II] luminosity–stellar mass distribution as a function of halo mass, we simultaneously model the clustering measurements of all samples at fixed redshift. Based on the modeling result, most ELGs in our samples are classified as central galaxies, residing in halos of a narrow mass range with a typical median of ∼10 12.2−12.4 h −1 M ⊙ . We observe a weak dependence of clustering amplitude on stellar mass, which is reflected in the model constraints and is likely a consequence of the 0.5 dex measurement uncertainty in the stellar mass estimates. The model shows a trend between galaxy bias and [O II] luminosity at high redshift (1.2 < z < 1.6) that is otherwise absent at lower redshifts.

Cosmology↗
DOE OSTI2020

Heterogeneous oxidation of amorphous organic aerosol surrogates by O 3 , NO 3 , and OH at typical tropospheric temperatures

Typical tropospheric temperatures render possible phase states of amorphous organic aerosol (OA) particles of solid, semisolid, and liquid. This will affect the multiphase oxidation kinetics involving the organic condensed-phase and gaseous oxidants and radicals. To quantify this effect, we determined the reactive uptake coefficients (γ) of O 3 , NO 3 , and OH by substrate films composed of single and binary OA surrogate species under dry conditions for temperatures from 213 to 313 K. A temperature-controlled coated-wall flow reactor coupled to a chemical ionization mass spectrometer was applied to determine γ with consideration of gas diffusion transport limitation and gas flow entrance effects, which can impact heterogeneous reaction kinetics. The phase state of the organic substrates was probed via the poke-flow technique, allowing the estimation of the substrates' glass transition temperatures. γ values for O 3 and OH uptake to a canola oil substrate, NO 3 uptake to a levoglucosan and a levoglucosan / xylitol substrate, and OH uptake to a glucose and glucose / 1,2,6-hexanetriol substrate have been determined as a function of temperature. We observed the greatest changes in γ with temperature for substrates that experienced the largest changes in viscosity as a result of a solid-to-liquid phase transition. Organic substrates that maintain a semisolid or solid phase state and as such a relatively higher viscosity do not display large variations in heterogeneous reactivity. From 213 to 293 K, γ values of O 3 with canola oil, of NO 3 with a levoglucosan / xylitol mixture, and of OH with a glucose / 1,2,6-hexanetriol mixture and canola oil, increase by about a factor of 34, 3, 2, and 5, respectively, due to a solid-to-liquid phase transition of the substrate. These results demonstrate that the surface and bulk lifetime of the OA surrogate species can significantly increase due to the slowed heterogeneous kinetics when OA species are solid or highly viscous in the middle and upper troposphere. This experimental study will further our understanding of the chemical evolution of OA particles with subsequent important consequences for source apportionment, air quality, and climate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Electrical and optical properties of Zr doped β -Ga 2 O 3 single crystals

Sn and Si are the typical dopants for achieving tunable n-type conductivity of β -Ga 2 O 3 single crystals grown from the melt. Here, we explore Zr doping in β -Ga 2 O 3 as assessed with UV–vis-NIR, Hall Effect, I–V, and CV measurements and hybrid functional calculations. Single crystals were grown from the melt with nominal Zr doping between 0.1 and 0.5 at% using Czochralski and vertical gradient freeze methods in Ar + O 2 . Furthermore, our results suggest that Zr Ga behaves as a shallow donor, with a measured activation energy of ~10 meV. Our samples show an electron mobility ~73–112 cm 2 V –1 s –1 , resistivity ~0.08–0.01 ohm cm, and carrier density of n = 6.5 × 10 17 –5 × 10 18 cm 3 at room temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Preparation and Characterization of YBa 2 Cu 4 O 8 Superconductor

Solid-state reaction of appropriate amounts of Y 2 O 3 , BaCOs, and CuO for 2 h at 800°C in flowing oxygen with a total pressure of 2.7 x 10 2 Pa (2 mm Hg), followed by cooling and annealing at 750°C for 10 h in oxygen at ambient pressure, has produced orthorhombic YBa 2 Cu 4 O 8 (124) as the main phase with YBa 2 Cu 3 O x (123) as an impurity phase. After the as-calcined powder was annealed in oxygen at 800°C for 24 h under ambient pressure, the phase purity improved considerably. Calcined 124 powder was pressed into pellets and rapidly annealed at temperatures from 870°C to 935°C. At these temperatures, the 124 decomposed into 123. The superconducting transition temperature, T c , of the annealed samples depended upon the annealing temperature and atmosphere. The decomposed samples have been characterized by low field RF SQUID magnetometer and high resolution transmission electron microscopy.

36 MATERIALS SCIENCE↗