Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mask”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Physical associations between quasi-stellar objects and galaxies.

Evaluation of evidence pertaining to apparent associations between galaxies and quasi-stellar objects. It is shown that for the five 3C QSOs which lie very close to bright galaxies the QSO-galaxy angular separations are inversely proportional to the redshifts of the galaxies. This lends additional support to the association hypothesis. However, an analysis of an essentially disjoint sample of QSOs identified from the Parkes radio catalog, and fainter galaxies in the catalog of Zwicky and his associates, reveals no statistically significant tendency toward pairing of QSOs and galaxies. The results can be explained in one of two ways. One is that, despite the evidence to the contrary, the 3C results are due to chance. The other is that real associations in the second sample are masked by selection effects. It is shown that several selectional biases do indeed discriminate against the detection of QSO-galaxy pairs, especially for fainter objects. Finally, on the assumption that the 3C QSO-galaxy associations are real, the relationship of QSOs to galaxies is discussed.

Burbidge, G. R.↗
NASA NTRS1973

A spiraled niobium tin superconductive ribbon

Copper film is vapor-deposited on clean ribbon and sprayed with photosensitive etch-resistant material. Photographic film masks are placed on ribbon and exposed to ultraviolet light. Etchant removes copper and exposure to oxidizing atmosphere forms niobium oxide. Photosensitive material is removed and ribbon is immersed in molten temperatures.

Coles, W. D.↗
NASA NTRS1973

P-channel silicone gate FET

Modified fabrication technique for P-channel MOSFET devices eliminates problems involving gate placement and gate overlap. Technique provides self-aligned gate, eliminating complexity of mask aligning. Devices produced by this process are considerably faster than conventional MOSFET's and process increases yield.

Ostis, S.↗
NASA NTRS1974

Procedure for dispersing fiber bundles

Fiber bundles are dispersed and fibers are cleaned within enclosed container; therefore, safety clothing, masks, and eye protection are not required. Procedure also could be used wherever materials, such as fiberglass or insulation, require dispersion, fluffing, or cleaning. Process could be automated into continuous operation for handling large quantities of fiber.

Padilla, D.↗
NASA NTRS1974

Process for the production of star-tracking reticles

Reticles designed with quartz bases are masked with desired pattern and then are coated with highly adherent layers of chromium, chromium silver alloy, silver, copper, and black chromium (mixture of chromium and chromium oxides). Black chromium final layer produces required nonreflective surface.

Toft, A. R.↗
NASA NTRS1972

On multidisciplinary research on the application of remote sensing to water resources problems

This research is directed toward development of a practical, operational remote sensing water quality monitoring system. To accomplish this, five fundamental aspects of the problem have been under investigation during the past three years. These are: (1) development of practical and economical methods of obtaining, handling and analyzing remote sensing data; (2) determination of the correlation between remote sensed imagery and actual water quality parameters; (3) determination of the optimum technique for monitoring specific water pollution parameters and for evaluating the reliability with which this can be accomplished; (4) determination of the extent of masking due to depth of penetration, bottom effects, film development effects, and angle falloff, and development of techniques to eliminate or minimize them; and (5) development of operational procedures which might be employed by a municipal, state or federal agency for the application of remote sensing to water quality monitoring, including space-generated data.

Source record↗
NASA NTRS1973

Automated thematic mapping and change detection of ERTS-1 images, part A

The author has identified the following significant results. Automatic and accurate image processing techniques are essential to full utilization of ERTS-1 photography. In pursuit of this, terrain types in the ERTS-1 photography will be classified by spatial signatures. Diffraction patterns from selected ERTS-1 images have been developed optically and are being analyzed to identify unique signatures for various terrain types. Spatial signatures have been definitely identified for cultivated land and certain urban areas. A Fourier plane mask has been developed that greatly facilitates the analysis of the diffraction patterns.

Gramenopoulos, N.↗
NASA NTRS1973

Principal sources and dispersal patterns of suspended particulate matter in nearshore surface waters of the northeast Pacific Ocean and the Hawaiian Islands

The author has identified the following significant results. ERTS-1 multispectral scanner imagery of the nearshore surface waters of the Northeast Pacific Ocean is proving to be a useful tool for determining source and dispersal of suspended particulate matter. The principal sources of the turbid water, seen best on the green and red bands, are river and stream effluents and actively eroding coastlines; secondary sources are waste effluents and production of planktonic organisms, but these may sometimes be masked by the very turbid plumes of suspended sediment being discharged into the nearshore zone during times of high river discharge. The configuration and distribution of the plumes of turbid water also can be used to infer near-surface current directions. Comparison of imagery of the nearshore water off the northern California coast from October 1972 and January 1973 shows a reversal of the near-surface currents, from predominantly south-setting in the fall (California Current) to north-setting in the winter (Davidson Current).

Carlson, P. R.↗
NASA NTRS1973

Respiratory analysis system and method

A system is described for monitoring the respiratory process in which the gas flow rate and the frequency of respiration and expiration cycles can be determined on a real time basis. A face mask is provided with one-way inlet and outlet valves where the gas flow is through independent flowmeters and through a mass spectrometer. The opening and closing of a valve operates an electrical switch, and the combination of the two switches produces a low frequency electrical signal of the respiratory inhalation and exhalation cycles. During the time a switch is operated, the corresponsing flowmeter produces electric pulses representative of the flow rate; the electrical pulses being at a higher frequency than that of the breathing cycle and combined with the low frequency signal. The high frequency pulses are supplied to conventional analyzer computer which also receives temperature and pressure inputs and computes mass flow rate and totalized mass flow of gas. From the mass spectrometer, components of the gas are separately computed as to flow rate. The electrical switches cause operation of up-down inputs of a reversible counter. The respective up and down cycles can be individually monitored and combined for various respiratory measurements.

Liu, F. F.↗
NASA NTRS1973

Utilizing ERTS-1 imagery for tectonic analysis through study of the Bighorn Mountains region

The author has identified the following significant results. Comparisons of imagery of three seasons, late summer-fall, winter, and spring indicate that for this region fall imagery is the best for overall geologic analysis. Winter scenes with light to moderate snow cover provide excellent topographic detail owing to snow enhancement, lower sun angle, and clarity of the atmosphere. Spring imagery has considerable reduction of tonal contrast owing to the low reflecting heavy green grass cover which subdues lithologic effects; heavy snow cover in the uplands masks topography. Mapping of geologic formations is impractical in most cases. Separation into tonal units can provide some general clues on structure. A given tonal unit can include parts of several geologic formations and different stratigraphic units can have the same tonal signature. Drainage patterns and anomalies provide the most consistent clues for detecting folds, monoclines, and homoclines. Vegetation only locally reflects lithology and structure. False color infrared 9 x 9 transparencies are the most valuable single imagery. Where these can be supplemented by U-2 color infrared for more detailed work, a tremendous amount of information is available. Adequately field checking such a large area just in one scene is the major logistic problem even in a fairly well known region.

Hoppin, R. A.↗
NASA NTRS1973

The latitudinal distribution of a debris mantle on the Martian surface

A relatively young mantling deposit of debris surrounds both Martian polar regions and extends toward the equator. This mantle apparently has been derived by wind erosion of sedimentary deposits in the polar regions, a process that is probably continuing now. The distribution of the mantle is not correlated with any particular terrain type for it has masked the small crater populations on young and old terrains alike. The paucity of small fresh craters at high latitudes can be directly attributed to the presence of this debris blanket. It is clear that extreme care should be exercised in using the populations of small craters to establish the chronology of the evolution of geologic provinces on Mars.

Soderblom, L. A.↗
NASA NTRS1973

Plasma column changes at small solar elongations

The differenced range versus integrated Doppler (DRVID) technique was used to study charged particle changes in the ray path between earth and Mariner 9. For plasma activity near the sun, DRVID data were obtained from August 10 to October 24, 1972, surrounding the Mariner 9 superior conjunction on September 7. If the records are viewed in terms of range change or range change rate, the day-to-day fluctuations in these quantities mask the changes expected due to the varying solar elongation. Thus, while the steady-state total electron content varies by a factor of 4, the columnar content changes show no systematic variations.

Callahan, P. S.↗
NASA NTRS1973

CIT photoheliograph functional verification unit test program

Tests of the 2/3-meter photoheliograph functional verification unit FVU were performed with the FVU installed in its Big Bear Solar Observatory vacuum chamber. Interferometric tests were run both in Newtonian (f/3.85) and Gregorian (f/50) configurations. Tests were run in both configurations with optical axis horizontal, vertical, and at 45 deg to attempt to determine any gravity effects on the system. Gravity effects, if present, were masked by scatter in the data associated with the system wavefront error of 0.16 lambda rms ( = 6328A) apparently due to problems in the primary mirror. Tests showed that the redesigned secondary mirror assembly works well.

Source record↗
NASA NTRS1972

The diluter-demand oxygen system used during the international Himalayan expedition to Mount Everest.

The diluter-demand regulators are designed in such a way that as the individual inspires he simultaneously draws ambient air and pure oxygen from a tank into his mask. The size of the ambient air orifice is made directly proportional to the barometric pressure by use of a passive aneroid valve. As altitude increases the ambient air orifice is automatically made smaller and the individual inspires a greater proportion of oxygen.

Blume, F. D.↗
NASA NTRS1972

Binaural signal detection - Equalization and cancellation theory.

The improvement in masked-signal detection afforded by two ears (i.e., binaural unmasking) is explained on the basis of a descriptive model of the processing of binaural stimuli by a system consisting of two bandpass filters, an equalization and cancellation mechanism, and a decision device. The main ideas of the model are initially explained, and a general equation is derived for the purpose of making quantitative predictions. Comparisons are then made between various special cases of this equation and experimental data. Failures of the preliminary model in predicting the data are considered, and possible revisions are discussed.

Durlach, N. I.↗
NASA NTRS1973

Phenomena associated with bench and thermal-vacuum testing of super conductors - Heat pipes.

Test failures of heat pipes occur when the functional performance is unable to match the expected design limits or when the power applied to the heat pipe (in the form of heat) is distributed unevenly through the system, yielding a large thermal gradient. When a thermal gradient larger than expected is measured, it normally occurs in the evaporator or condenser sections of the pipe. Common causes include evaporator overheating, condenser dropout, noncondensable gas formation, surge and partial recovery of evaporator temperatures, masking of thermal profiles, and simple malfunctions due to leaks and mechanical failures or flaws. Examples of each of these phenomena are described along with corresponding failure analyses and corrective measures.

Marshburn, J. P.↗
NASA NTRS1974

Advanced-priority interrupt module

Module contains mask register, line register, primary sync register, secondary sync register, push-pop stacking register, control section, and interrupt address generator. APIM operates in conjunction with logic found in majority of minicomputers to provide fully-vectored interrupt capabilities.

Jeane, H. L.↗
NASA NTRS1975

Volume measuring system

Chamber is designed to be airtight; it includes face mask for person to breathe outside air so that he does not disturb chamber environment. Chamber includes piston to vary air volume inside. Also included are two microphone transducers which record pressure information inside chamber.

Oele, J. S.↗