Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINERALOGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Constraining Alteration Processes Along the Siccar Point Unconformity in Gale Crater: Results from the Sample Analysis at Mars Instrument

A driving factor for sending the Mars Science Laboratory, Curiosity rover to Gale Crater was the orbital detection of clay minerals in the Glen Torridon (GT) region suggesting a past aqueous environment was habitable and could contain organic evidence of past microbiology. The objective of the Curiosity’s Sample Analysis at Mars (SAM)instrument was to detect organic evidence of past microbiology and volatile bearing mineralogy that would inform if past geochemical conditions would have supported microbiology in the GT region. The Siccar Point unconformity occurs between the underlying GT mudstone and the overlying Stimsons and stone of the Green heugh Pediment has evidence of enhanced alteration in the mudstone just below the contact suggestive of aqueous processes favorable for microbial activity. The origin of the altered material includes subaerial weathering, alteration from fluids moving along unconformity, upward fluid percolation from the mudstone or downward fluid percolation from the Pediment 1,2,3,4,5The objectives of this work were to 1) Utilize the S AM-EGA results to characterize the geochemistry and mineralogy above and below the Siccar Point unconformity through analysis of drilled samples in the3 GT mudstones and an overlying pediment sandstone. and 2) Utilize SAM-EGA results to constrain alteration scenario(s) below the unconformity.

B Sutter↗

Calibration of the SHERLOC Deep Ultraviolet Fluorescence–Raman Spectrometer on the Perseverance Rover

We describe the wavelength calibration of the spectrometer for the scanning of habitable environments with Raman and luminescence for organics and chemicals (SHERLOC) instrument onboard NASA’s Perseverance Rover. SHERLOC utilizes deep ultraviolet Raman and fluorescence (DUV R/F) spectroscopy to enable analysis of samples from the Martian surface. SHERLOC employs a 248.6 nm deep ultraviolet laser to generate Raman-scattered photons and native fluorescence emission photons from near-surface material to detect and classify chemical and mineralogical compositions. The collected photons are focused on a charge-coupled device and the data are returned to Earth for analysis. The compact DUV R/F spectrometer has a spectral range from 249.9 nm to 353.6 nm (200 cm1 to 12, 000 cm1) (with a spectral resolution of 0.296 nm (40 cm1)). The compact spectrometer uses a custom design to project a high-resolution Raman spectrum and a low-resolution fluorescence spectrum on a single charge-coupled device. The natural spectral separation enabled by deep ultraviolet excitation enables wavelength separation of the Raman/fluorescence spectra. The SHERLOC spectrometer was designed to optimize the resolution of the Raman spectral region and the wavelength range of the fluorescence region. The resulting illumination on the charge-coupled device is curved, requiring a segmented, nonlinear wavelength calibration in order to understand the mineralogy and chemistry of Martian materials.

Kyle Uckert↗

Laboratory Investigation of the Effect of Venusian Weathering on Mineral Spectra

Introduction: The recent selection of two missions to Venus has renewed the importance of deter-mining weathering reactions between minerals and the Venusian atmosphere, and the spectral signatures of minerals before, during, and after these reactions. The rate at which weathering reactions progress also constrain show long unstable minerals will be present on the surface (e.g., [1]), and enables the use of mineralogy as a constraint on surface age(e.g., [2-3]).In order to gain an understanding of how mineral compositions and spectra change with weathering, we have begun conducting experiments in a 1 atm experimental setup at Wesleyan University. This setup exposes minerals to the temperature and most abundant gases of the Venus atmosphere (CO2, SO2, N2).We conducted initial experiments using biotite, calcite, and montmorillonite in order to test our methodology with minerals that may be relevant to recording the history of water on Venus. Methods: Experiments were conducted in Thermo Fisher Scientific Lindberg/Blue M Mini-Mite horizontal tube furnaces at Wesleyan University. Experiments used natural mineral chips and powders, and were conducted at 1 atmosphere and 460 °C under pre-mixed gases provided by Air Gas(Table 1). The furnaces are set up in a flow through configuration so that solid samples are exposed to a fixed gas composition, and quartz glass process tubes were used in all experiments (1/4” diameter for experiment V4, ½” diameter for all others). These conditions were maintained for the du-rations listed in Table 1, at which point the furnace was turned off with gas flowing until the sample was cool enough to extract under N2and be placed in a desiccator for storage. Run products were carbon coated and examined using a Hitachi SU5000 Field Emission Gun Scanning Electron Microscope (SEM) equipped with an EDAX Octane Pro EDS detector located at Wesley-an University. Visible-Near Infrared Spectroscopy (VNIR) analysis was performed on powdered samples under a nitrogen atmosphere using an ASD Fieldspec Proover the 350-2500 nm range. Powdered mineral samples were milled to a particle size of < 45μm and were spiked with an internal standard (Al2O3, corundum) to obtain quantitative mineralogy. Samples were analyzed using a Panalytical X’Pert pro X-ray Diffractometer (XRD), with an X’Celerator high speed detector and Co Kα radiation, with data collected at a step size of 0.02 ̊/minute step counting rate from 2 to 80 degrees 2θ at 45 mA/40kV in the X-ray Diffraction Laboratory located at NASA Johnson Space Center. Materials Data Inc (MDI) software suite, JadeTMv9 was used for Rietveld refinement to determine phase abundances and mineral identification by comparing XRD patterns to International Center for Diffraction Data (ICDD) database patterns. Table 1: Experimental matrix. Experiment Name Duration (Days)Gas Com-position (trace gas)MineralsV487SO2/N2(1.4%)Montmorillonite, biotiteV519SO2/N2(1.4%)CalciteV619CO2/SO2/N2(1.4% SO2, 2.1% N2)Montmorillonite, biotiteV828SO2/N2(1.4%)Biotite, calcite Results: Calcite. In both experiments, calcite was exposed to the SO2/N2gas mixture, and in both experimental run products, XRD analysis detected anhydrite, which is consistent with EDS measurements conducted in the SEM. The XRD analyses show greater amounts of anhydrite present after 28 days than 19, suggesting the calcite reaction progressed further given longer duration. Grain surface morphology as seen in the SEM also shows secondary mineral growth (Fig. 1). VNIR spectra show no change, as expected since anhydrite lacks spectral features in this wavelength range. Montmorillonite. Montmorillonite was exposed to two different gas mixtures, the SO2/N2mix and CO2/SO2/N2mix over different durations (87 and 19 days, respectively). VNIR analyses of both run products show a reduction in the 1441and1910 nm water features as well as a shift of the 1411 and 2011 nm features to shorter wavelengths that may indicate re-structuring in the crystal lattice and the production of amorphous phases [4]. XRD results are consistent with this, showing a shift of the 001 peak from 15Åto 10Åin both run products. The amount of X-ray amorphous material in the montmorillonite run products was greater than that present in the unreacted clay, being the greatest in the 87 day V4 experiment. No other secondary phases were detected in the run products, however sulfur was present in EDS analyses of powder samples.

A R Santos↗

Early History of Ryugu’s Parent Asteroid: Evidence from Return Sample

Near-Earth Cb-type asteroid (162173) Ryugu is a rubble pile asteroid made of fragments of the original parent asteroid [1-5]. It is possible that the fragments from various depths of the original asteroid are on the surface of the present-day Ryugu. Therefore, samples collected from Ryugu are expected to retain formation and evolution history of the interior of Ryugu’s parent asteroid. In this study, we will focus on understanding the early history of Ryugu’s parent asteroid. For this purpose, we need to understand: 1) when and where in the solar nebula Ryugu’s parent asteroid formed, 2) the original mineralogy and the abundance and composition of water-rich ice in the accreted materials, 3) how these materials chemically and mineralogically evolved, and 4) how the parent body was destroyed by a catastrophic collision.

T. Nakamura↗

Pink Spinel in Apollo Impact Melt Rock 68815: Implications for Mg-Suite Magmatism

Introduction: Magnesian rocks from the lunar highlands are collectively termed the Mg-suite. Characterized by high (>60) Mg# (molar 100×Mg/[Mg+Fe]) in mafic phases and calcic plagioclase, these rocks are plutonic to hypabyssal in origin, and include a range of bulk mineralogies such as troctolites, dunites, norites, gabbronorites, and spinel troctolites [1]. These Mg-suite lithologies have distinct trace element concentrations and ratios that differentiate them from other lunar rock types. These rocks are ancient, generally dated to between 4.5 and 4.1 Ga, although it is unknown if this represents the full range of Mg-suite ages [1–2]. Among the Mg-suite lithologies, the spinel troctolites are relatively rare, to date only found in polymict breccias [3]. Spinel troctolites, as their name suggests, consist of calcic plagioclase and forsteritic olivine, with minor amounts of spinel (MgAl2O4), ± pyroxene and cordierite [1,4]. This form of spinel is often called ‘pink’ spinel because of its appearance in thin section under plane polarized light (PPL; Fig. 1), due to minor amounts of Cr. Spinel troctolites are generally plutonic or hypabyssal in origin (subsequently exhumed and incorporated into polymict breccias), or formed through impact processes (e.g., crystalline impact melt) [5]. A spinel-rich lithology has also been found in the Moscoviense region of the Moon via the Moon Mineralogy Mapper (M3) and lacks other mafic phases [6]. Finally, while the Mg-suite sampled thus far consists of plutonic (or hypabyssal) rocks, the question remains if such magmas could have erupted on the surface of the Moon [7]. These magmas have much lower density than mare basalts, but little sample or remote sensing evidence has been found to support the idea that extrusive Mg-suite volcanism occurred [7]. Here, we present a coordinated microanalytical study of spinel-bearing lithic and mineral clasts found in Apollo sample 68815. These data will be used to understand their petrogenesis (magmatic or impact) and modification histories, and to shed light on the existence of volcanic Mg-suite rocks. Sample Description: Apollo sample 68815 is a polymict impact melt breccia containing a variety of lithic and mineral fragments embedded in devitrified impact melt. This sample was chipped off the top of a boulder at Station 8 during the Apollo 16 mission and had an original weight of nearly 1.8 kg. In this study, we investigated two polished thin sections of 68815: 68815,17 and 68815,148, both containing spinel. Methods: The thin sections of 68815 were studied using optical light microscopy (PPL, cross-polarized light, and reflected light) with a Keyence VHX-7100 Digital Microscope. Each section was then X-ray mapped for 13–14 elements using a Cameca SX100 electron probe microanalyzer (EPMA) located in the Kuiper Materials Imaging and Characterization Facility (KMICF) at the University of Arizona. We have obtained geochemical information about the phases (olivine, plagioclase, spinel, pyroxene) in the thin sections also using the EPMA. In addition, we have used ThermoScientific Helios NanoLab 660 Focused-Ion-Beam Scanning-Electron Microscope (FIB-SEM) and a Hitachi S-4800 SEM (both in KMICF) to obtain backscattered electron (BSE) images and energy dispersive Xray spectrometry (EDS) maps of areas of interest. Using a JEOL 7900F SEM at the Astromaterials Research & Exploration Science (ARES) at NASA Johnson Space Center (JSC), we have obtained electron backscatter diffraction (EBSD) maps of the spinel-bearing portions of the thin sections. The EBSD data were collected under beam conditions of 20 kV, and ~90 μA, with step sizes varying from 0.05 to 2 μm. Following EBSD data collection, we processed the data using AZtecCrystal and MTEX, a free MATLAB toolbox. Results: We have found clasts with subophitic textures, that consist of primarily olivine and plagioclase, with minor amounts of pink Mg-Al spinel and pyroxene (Fig. 1). These clasts are up to ~1 mm in length and contain spinels up to 50 μm across. We have additionally identified pink Mg-Al spinels within the impact melt (i.e., not contained in lithic clasts) in both thin sections. In one instance, a single spinel grain is approximately 300 μm across (Fig. 1b, 2). The spinel fragments embedded in impact melt have varying compositions, typically distinct from the compositions of spinels in the lithic clasts. Spinel-Bearing Clasts: Ten lithic clasts with similar textures and mineral compositions were identified between 68815,17 (two clasts) and ,148 (eight clasts). These clasts fall into two groups. The first has skeletal olivine with intergranular plagioclase, with minor amounts of pyroxene and spinel (Fig. 1a, 2c, 2d). The spinel in these clasts are found amid the plagioclase. The second group have an intergranular texture of olivine and plagioclase, again with minor spinel and pyroxene. The second group may contain spinels surrounded by plagioclase, and spinels enclosed in olivine. Spinels located within both clast types range from no apparent Cr zoning, to reverse zoning (Cr-enrichment inward; Fig. 2d), to normal zoning (Cr-enrichment outward). In the clasts thus far investigated with EPMA, plagioclase compositions range from An# (molar 100×Ca/[Ca+Na+K]) 92–96. Olivine Mg# ranged from 77 to 94, while pyroxene had Mg# from 54–84. Spinel in the clasts have Cr# (molar 100×Cr/[Cr+Al]) 2–4 and Mg# 88–91, which is within the range of pristine and plutonic spinel troctolites [8]. Isolated Spinels: These crystals are generally euhedral to subhedral, and can exhibit reverse Cr zoning (Cr enrichment inward) or no apparent Cr zoning. The spinels thus far investigated via EPMA have Cr# 9–14 and Mg# 65–82. The Cr# for these spinels is within the range reported by [8], but have lower Mg#. Future Work: We will continue to process the EBSD data for these lithic and mineral clasts. We will also continue to characterize these clasts using EPMA and SEM. By thoroughly characterizing the various spinels and spinel-bearing clasts, we aim to constrain the petrogenesis of these minerals and rock fragments. Acknowledgments: We thank NASA for the loan of these thin sections. We thank Ken Domanik and Jerry Chang for their support with data collection. Work was supported by a University of Arizona RII Core Facilities Pilot Program grant and start-up funds to JJB. We acknowledge support from NASA’s Planetary Science Research program for analysis performed at JSC. References: [1] Shearer C. K. et al. (2015) Am. Min. 100, 294–325. [2] Borg L. E. et al. (2020) GCA 290, 312–332. [3] Warren P. H. (1993) Am. Min. 78, 360–376. [4] Dymek R. F. et al. (1976) LPS VII, 2335–2378. [5] Treiman et al. (2019) Am. Min. 104, 370–384. [6] Pieters et al. (2011) JGR: Plan. 116:E00G08. [7] Prissel et al. (2016) Icarus 277, 319–329. [8] Prissel et al. (2016) Am. Min. 101, 1624–1635.

spinel↗

A Mars 2020 Perseverance SuperCam Perspective on the Igneous Nature of the Máaz Formation at Jezero Crater, Mars

The Mars2020 Perseverance rover landed in Jezero crater in February 2020,and first encountered the Máaz formation (or Crater floor-fractured rough(Cf-fr) unit previously mapped based on orbital data[1]).In this study, we use data from the SuperCam instrument(SCAM) to show that the Máaz formation has an igneous origin. SuperCam is a remote-sensing instrument onboard Perseverance, and investigates the texture, mineralogy, and chemistry of rocks and soils, as well as atmospheric features [2,3]. SuperCam comprises the Remote Micro Imager (RMI) to provide high-resolution images, laser-induced breakdown spectroscopy (LIBS)to investigate the major and minor element chemistry of materials, Raman, and passive visible-near infrared (VISIR) spectroscopy to analyze the mineralogy of targets, and time-resolved luminescence spectroscopy (TRLS)to measure organic fluorescence and inorganic luminescence. In addition, the microphone (MIC) can constrain the rock hardness through measurements of the shockwave of LIBS shots. In this study, we use LIBS-based major-oxide compositions (MOC),quantified using the calibration in [2].

Mars 2020↗

Boninites from Cyprus Island as Mercury Lava Analogues

Mercurian meteorites have never been found on Earth. However, thanks to the NASA’s MESSENGER mission, some constraints on the geochemistry and mineralogy of Mercurian rocks are now available. Results from the Xand Gamma-ray Spectrometers onboard the MESSENGER mission suggest a surface composition with Mg/Si ratio within 0.33-0.67 and a Fe/Si ratio within 0.03-0.15, characterized by extremely reduced (IW -6) rocks. Experimental petrology studies show that the most appropriate Mercurian rock-type should be a Mg-rich, Fe-poor basalt, mainly composed of orthopyroxene and plagioclase. Visible/near-infrared (VNIR) spectroscopy of terrestrial basalts can help contextualize acquired MESSENGER spectra. The most Mg-rich, Al-poor regions on Mercury, are suggested to be orthopyroxene-rich lavas analogous to terrestrial boninites and/or komatiites. At present, there are no studies on the geochemistry and mineralogy of boninites for their possible association with Mercurian material. In addition, there are still no information about the VNIR spectral properties of boninitic material. In this work, we investigate the VNIR and Raman spectroscopy and X-Ray Fluorescence (XRF) of a series of boninitic pillow lavas that were collected on the Upper Pillow Lavas unit of the Troodos Massif, located on the island of Cyprus. Data are then discussed in order to reveal potential classification as Mercury analog.

Nicola Mari↗

Analysis of Samples from Asteroid Ryugu Returned by Hayabusa2

After returning to Earth in the winter of 2020, the samples from Cb-type asteroid Ryugu were stored under atmosphere-free conditions at the Extraterrestrial Materials Curation Center of ISAS/JAXA, and investigated for basic descriptions (sample imaging, weighing, etc.). They were distributed to six initial analysis teams in Japan in June 2021. The "Stone" team, in charge of analysis of coarse particles (>1 mm in size), conducted a series of analyses using a variety of techniques including reflectance spectra measurement, synchrotron-radiation three-dimensional elemental and mineralogical analysis, bulk elemental analysis using muon beam, Fe valence state measurement by XANES and Mössbauer spectroscopy, detailed mineralogical and petrological characterization by scanning and transmission electron microscopes. Physical and thermal properties of Ryiugu samples were measured to understand the response to shock and heating. In this talk, I would like to introduce summary of analysis results and what comes to be known about the formation and evolution of asteroid Ryugu.

Tomoki Nakamura↗

The Aguas Zarcas Breccia - Similarities to Surface Features of C-Complex Asteroids Ryugu and Bennu

Knowledge of the materials originally present in the proto-solar nebula is one of the most significant constraints for models concerning the formation of our solar system. The physicochemical properties of these original materials can be determined through two distinct and complementary approaches: astronomical observations of nascent stellar systems and the dense clouds from which they originated; and laboratory studies of available astromaterials such as meteorites, interplanetary dust particles, comets, as well as returned mission samples (e.g., from Hayabusa -1 -2;OSIRIS -Rex). Laboratory study of these extraterrestrial materials provides valuable information about the first solids portion of the early solar system and their evolution. Here, we present petrographic and mineralogical characteristics of the polymic beccias Aguas Zarcas based on the research results of [1].On April 23, 2019, at 21:07 local time, a meteorite fall occurred in Aguas Zarcas, San Carlos County, Alajuela province, Costa Rica. The rapid recovery of this brecciated carbonaceous chondrite after its fall provides an opportunity to study a freshly fallen, relatively uncontaminated, and highly brecciated meteorite to compare with samples returned by theHayabusa2 and OSIRIS-REx spacecraft from C-group asteroids. The study includes several pre-rain fragments [1].The X-ray Computed Tomography (XCT) results show many different lithologies. We describe the petrography and mineralogy of five different lithologies of the Aguas Zarcas meteorite. We also present data on bulk oxygen isotopes. We describe all fragments in detail and attempt to classify each lithology in order to understand the origin and formation history of the Aguas Zarcas parent body. Our results show that some lithologies of Aguas Zarcas are similar to those in CM chondrites, but others are unique. The different lithologies [1] also represent different degrees of hydration and heating, which are good analogues for the types of materials returned by the Bennu and Ryugu asteroids. Spectroscopic observations of the Ryugu and Bennu asteroids compared to laboratory measurements of meteorites suggest that the asteroids have some similarities to heated CM, heated CI, or CI chondrites[2-5]. Both asteroids are thought to be composed of materials altered by aqueous alteration (e.g., [5]) and formed by reaccretion after destruction by impacts and brecciation (e.g., [6-7]). Considering the different lithologies in Aguas Zarcas [2] and other CM chondrites [8-9], these types of carbonaceous chondrites can be considered good analogues for samples from the Ryugu and Bennu asteroids. The presence of unique and rare lithologies in the Aguas Zarcas, different from the typical CM chondrite lithologies, suggests complex mixing of different materials in a highly dynamic environment.

Imene Kerraouch↗

Heterogeneity of Bulk Oxygen Isotopic Compositions in Anhydrous Interplanetary Dust Particles

Introduction: Anhydrous interplanetary dust particles are one of the least altered ancient solar systemmaterials. Their bulk chemical compositions match those of CI chondrites within a factor of 2-3, except for carbonwhich is enriched in both anhydrous and hydrated IDPs by ~4x CI [1]. Hydrous IDPs often show 16O-poor isotopiccompositions, likely due to the interaction with isotopically heavy H2O [2]. Anhydrous IDPs are interpreted tooriginate from comets from the outer solar system [3]. Oxygen isotopic data for these materials is scarce, but resultspoint to a wider range of compositions [4]. This heterogeneity might be a result of mixing between a 16O-rich and a16O-poor reservoir formed via self-shielding and photodissociation of CO [5]. Here, we report bulk oxygen isotopiccompositions of three anhydrous IDPs in context of their mineralogical composition and discuss possible origins ofisotopic heterogeneity. Experimental: Bulk chemical composition and mineralogy of 70 nm thin ultramicrotomed sections of threeanhydrous IDPs (L2099A7, L2099A8, and L2071AB1) were analyzed using a Thermo Scientific Titan Themis G360-300 TEM equipped with a four-quadrant energy-dispersive X-ray detector (Super-X G2) at University ofMünster. Bulk oxygen isotopic compositions were measured using a NanoSIMS 50 at the Max-Planck-Institut fürChemie in Mainz. A focused Cs+ ion beam (~1 pA, ~100 nm) was rastered over a field of view varying from 5 x 5 to6 x 6 μm2, depending on particle size for 15 layers. Negative secondary ions of 16O, 17O, 18O, 12C14N, and 28Si werecollected on electron multipliers. The 16OH contribution to the 17O peak was 1-2 ‰. As a standard, a matrix regionof meteorite CR2 Queen Alexandra Range (QUE) 99177 was used, whose oxygen isotopic composition wasmeasured by [6]. Results and Discussion: Particles A7 and A8 are both fine-grained, consisting mostly of small, 100 nm-sizedequilibrated aggregates (EA). Both particles exhibit discontinuous magnetite rims with thicknesses up to 50 nm inA7 and 100 nm in A8 on the outsides. In Particle AB1, the upper part of the particle consists of a few EAs, while thelower part contains lots of small GEMS grains with 100-200 nm diameter clustered together. Magnetite rims arenearly absent, the rare rims reaching maximum 20 nm thickness, indicating that AB1 is of more primitive naturethan the other two IDPs [1]. Furthermore, it contains several diffuse GEMS-like areas, identified by an amorphoussilicate groundmass with small nano-inclusions of Fe,Ni-metal and Fe-sulfides. All three particles are subsolar forall major element/Si ratios. Mean S/Si of particles A7 and A8 is 0.046 and 0.048, respectively, while it is an order ofmagnitude higher in AB1 (0.184). This reflects the higher degree of thermal alteration in A7 and A8, resulting in theloss of volatile S and oxidation of Fe-sulfides and FeNi-metal to magnetite as present in particle rims. A8 is rather16O-poor with δ17OSMOW = 7.8 ± 3.4 ‰ and δ18OSMOW = 9.5 ± 3.1 ‰ (1σ), followed by A7 with δ17OSMOW = − 0.8 ±4.6 ‰ and δ18OSMOW = −2.2 ± 3.4 ‰. In contrast to that, AB1 has the most 16O-rich bulk composition with δ17OSMOW= −24.2 ± 5.4 ‰ and δ18OSMOW = −25.3 ± 3.6 ‰. All investigated IDPs plot slightly above the CCAM line aspreviously reported for other anhydrous IDPs [4], maybe due to a contribution from circumstellar dust from AGBstars enriched in 17O [7]. The 16O-rich composition of AB1 is similar to the most 16O-rich anhydrous IDP U2015D21measured by [8] which is dominated by GEMS [9] and the GEMS-rich IDP GM4-2 reported by [10]. Nevertheless,it is unlikely that GEMS are the carrier for the 16O-rich composition of AB1 because most GEMS have O isotopiccompositions indistinguishable from terrestrial values, although errors on these analyses are large [11]. The isotopicheterogeneity is best explained by contribution of grains from different regions in the protoplanetary disk, samplingdifferent O isotope reservoirs, created by self-shielding and photodissociation of CO. This process resulted in 16O-rich CO gas and 16O-poor H2O that froze as ice-mantles onto dust grains [12]. Alternatively, the higher degree ofheating in A7 and A8 could have influenced isotopic fractionation, because higher δ17,18O values are reported fromthe regions of the atmosphere where small particles are heated and oxidized, as observed for the thermal alteration ofcosmic spherules [13]. Acknowledgements: We would like to thank NASA Astromaterials Acquisition & Curation Office for providing IDPsamples and DFG for funding this project (VO1816/5-1)

B Schulz↗

Lithological variation of asteroid Ryugu samples returned by the Hayabusa 2 spacecraft: Assessment from the 18 particles distributed to the initial analysis “Stone” team

JAXA’s Hayabusa2 spacecraft successfully returned~5.4g of C-type asteroid Ryugu materials on Dec. 2020 [e.g., 1] and the recovered samples were extensively analyzed by initial analysis teams and Phase2 curation teams. The reported results show that Ryugu samples are similar to CI chondritesin chemistry and mineralogy, showing evidence for aqueous alteration in the parent body [e.g., 2,3]. As a “stone” team of the initial analysis, we received 18coarse particles (>1 mm) of Ryugu samples to characterize their mineralogy and petrology. We found that the samples were breccias of mm-to-sub mm size clasts. All of the clasts are mainly composed of Mg-Fe phyllosilicates, but the alteration degree appears slightly different from one clast to another. Here we report a lithological variation of Ryugu samples to propose their reasonable lithological classification based upon different mineral assemblages and to discuss the formation and evolution of the Ryugu parent body.

Michael E Zolensky↗

Characterization of NU-LHT-4M Lunar Regolith Simulant Using Different Raman Configurations

As much as possible, structures to help sustain a long-term human presence on the moon will be constructed via in-situ resource utilization (ISRU) from lunar regolith. Various processes have been proposed to make lunar regolith-based construction materials, but one complication is that the lunar regolith is relatively complex in terms of composition and can vary quite significantly from one site to another. Some of these methods to make lunar regolith-based construction materials are quite sensitive to the composition and so in-situ methods for evaluating the composition of the lunar regolith could be critical. Various analytical instrumentation has been proposed for in-situ characterization of the composition of regolith on planetary bodies. Raman spectroscopy has been suggested and has some advantages over other in-situ techniques, such as potential for relatively high spatial resolution, direct determination of the mineralogy (while other methods may only infer the mineralogy), nondestructive analysis, relatively simple instrument configurations, and minimal sample preparation/handling. For example, Raman instrumentation has already been deployed in rover-based missions to Mars. Previously, we developed the Standoff Ultracompact Micro-Raman Sensor (SUCR), which is a portable Raman spectroscopy instrument capable to be integrated into a rover or onto a lander. Here, we present work on Raman spectroscopy measurements of NU-LHT-4M lunar simulant using three different Raman instruments with different configurations for collecting Raman data with the goal to explore the effect of these different configurations on the results, especially for use in a lunar environment.

Raman Spectroscopy↗

Ryugu and the Quest for Unaltered CI-Like Materials From the Early Solar System

Samples of C-type asteroid (162173) Ryugu returned by the Hayabusa2 mission of JAXA [1-3] have been found to be mineralogically, chemically, and isotopically similar to CI carbonaceous chondrites [3-6]. The rare CI meteorites have bulk chemical compositions closely matching the solar photosphere in all but the most volatile elements, and so are considered to represent the starting composition of the solar system. Paradoxically, however, all known CI have been extensively altered by aqueous fluids (i.e., they are CI1), so that their primary mineralogy, textures, and oxygen isotope compositions have been obscured. Thus, one of the most exciting discoveries from Ryugu samples is that they contain “less-altered” (CI2) areas, which have substantial abundances of anhydrous silicates (olivine and pyroxene) and Ca-Al-rich phases that may be remnants of primordial CI3 materials [4-11]. This discovery has motivated new investigations of CIs that show higher abundances of anhydrous silicate grains than previously recognized [9,12,13]. Such studies are an important step in the search for unaltered CI-like material, a so-called “holy grail” of meteoriticists [14]. To further this goal, we are studying Ryugu samples in the context of a previously unrecognized, potentially Ryugu-like, population of C2 materials that occur as xenoliths in polymict ureilites.

C A Goodrich↗

New Mastcam Multispectral Rock Classes in Sulfate-Bearing Strata, Gale Crater, Mars

Orbital data of Gale Crater, Mars has identified a transition in the stratigraphy of Mt. Sharp indicating an environmental change from a wetter one that accommodated clay mineral formation to a drier environment that led to the precipitation of sulfates. Mt. Sharp is not the only location on Mars for which this transition has been observed which suggests a global environmental change around the Noachian-Hesperian transition. Also visible from orbit is a dark-toned marker band that lies within the sulfate-bearing strata hypothesized to be a volcanic ash deposit. The Mars Science Laboratory (MSL) Curiosity rover is currently exploring this region of Mt. Sharp. In-situ analyses by the rover show changes in morphology and chemistry between the sulfate-bearing layers below and above the marker band and the marker band itself. The MSL instrument payload includes the Mast Camera (Mastcam), which collects multispectral images to provide context for other instruments and broad mineralogic interpretations. In addition to mafic Fe-bearing minerals, Mastcam is sensitive to oxides and some hydrated minerals, important indicators of alteration. In our previous work, we compiled a database of Mastcam spectra through Curiosity’s exploration of Vera Rubin ridge (sols 0-2302), from which 9 spectral classes of rocks were identified (Fig. 1D). Each class has diagnostic spectral features that reflect a common mineralogic interpretation. More recently, as Curiosity traversed through the clay-rich region, Glen Torridon (GT), there was some variation in the rock spectral classes potentially due to nontronite and other phyllosilicates, but not enough to warrant new spectral classes (Fig. 1B). We hypothesize that new classes will appear in accordance with sulfate-bearing strata and the marker band, specifically appearing as a ‘downturn’ in the last two wavelength filters that is inherent, but not unique, to polyhydrated Mg-sulfates. Here, we expand upon our analysis of Mastcam multispectral observations through Curiosity’s second encounter with the marker band (up to sol 3672), comparing the spectral diversity within the sulfate-bearing unit and the marker band to the spectral classes encountered previously in the traverse. These analyses will provide a basis for comparison and aid in selecting targets for in-situ investigations as Curiosity continues its ascent of Mt. Sharp.

A M Eng↗

Testing Destruction of Clay Minerals By Silica-Poor Brines in Gale Crater, Mars Using Laboratory and Field Experiments

The Mars Science Laboratory (MSL) Curiosity rover landed in Gale crater to investigate the cause for mineralogical changes seen from orbit, including the clay-sulfate mineral transition observed on its central mound, Aeolis Mons. The lower strata show spectral signatures of clay minerals, hematite, and hydrated Mg sulfates, and the upper strata are dominated by hydrated Mg sulfate signatures. This significant transition has been observed in other locations on Mars, and therefore processes related to the clay mineral-sulfate transition are likely important broadly across Mars. The bulk mineralogy of ~3.7 Ga sedimentary rocks in Gale crater is a product of variations in sediment sources and depositional processes, with overprinting by episodes of early and late diagenetic alteration. Sedimentary analyses of the smectite clay minerals observed in the Glen Torridon (GT) region of Mount Sharp suggest formation in a lacustrine aqueous environment. Examination of the Vera Rubin ridge (VRR) strata indicate that it was formed at the same time as GT and later altered by extensive diagenesis. Recent work suggests that the observed mineral transition from smectites and talc-serpentinites in GT to iron oxides and oxyhydroxides and VRR may have resulted from extensive diagenetic alteration by density driven, silica-poor brines sourced from the overlying sulfur-bearing unit on Mount Sharp. This process of alteration by silica-poor brines is observed in limited locations on Earth. We are therefore working to demonstrate the impacts of silica poor brines on clay mineral alteration in laboratory column and terrestrial analog burial experiments. Column experiments allow the investigation of dissolution and precipitation under conditions that represent a closer analog to natural environments, while burial experiments allow examination of weathering reactions of a known starting material after a specific period of time in a natural field environment. Both methods are valuable for interpreting the water-rock interactions between clay minerals and brines. In preparation for these longer-term column and burial experiments, we are performing preliminary batch dissolution experiments on materials relevant to Glen Torridon: nontronite and serpentinite. We are using magnesium sulfate brine solutions relevant to those proposed on Mars. The results of this study can provide constraints on the characteristics of the diagenetic fluids that formed the altered minerals in Gale crater. They can also provide insights into the role of brine density-driven diagenesis in past aqueous environments on Mars, which have been proposed to be widespread.

J E Valdueza↗

Ultraviolet Photooxidation of Smectite-Bound Fe(II) and Implications for the Origin of Martian Nontronites

Clay minerals detected with orbital and in situ instruments in ancient Martian terrains constrain Mars' climate and aqueous alteration history. Early in its history, Mars experienced an atmospheric redox change and iron-bearing clay minerals may preserve the effects of that transition. Ferrous smectites, the thermodynamically predicted product of chemical weathering of basalts under anoxic conditions, may have undergone oxidation by exposure to chemical oxidants in the atmosphere or regolith, or by direct photooxidation at the surface. To assess these potential oxidation pathways, ferrous trioctahedral smectites of varying initial iron content were synthesized and subjected to oxidation by ultraviolet (UV) irradiation. Experimental UV irradiation under an anoxic atmosphere equivalent to approximately 7 years of flux on the Martian surface caused partial oxidation of smectite-bound Fe (Fe3+/ΣFe = 16–18%) and octahedral sheet contraction. Metal-OH vibrational bands in visible/near infrared (VNIR) reflectance spectra of oxidized smectites changed in band depth and asymmetry with higher iron content. X-ray diffraction patterns of UV irradiated samples indicate the formation of a mixed di- and trioctahedral smectite or a secondary nontronite phase, possibly on the surfaces of higher iron content smectites. These experiments suggest that UV irradiation is able to oxidize structurally bound iron in smectites without the presence of other chemical oxidants. Photooxidation may have influenced the mineralogy, both syndepositionally and postdepositionally, of Martian alteration assemblages formed near the surface and this process needs not be limited to one part of their formation history. Plain Language Summary: Martian mineral assemblages observed with orbiters and rover instruments allow us to understand the planet's past climate and aqueous activity. Hydrated minerals that contain Fe(II) are of particular interest as they would have been affected by the early atmosphere becoming more oxidizing overtime, changing the structural iron into Fe(III). In this study, we synthesized Fe(II) smectites with varying iron content and irradiated them with an ultraviolet (UV) light source to test whether they could be photooxidized. Iron in the smectite minerals was incompletely oxidized by UV radiation after being exposed for the equivalent of approximately 7 years of exposure on the early Mars surface. The smectites with higher iron content showed more changes with photooxidation in their visible/near infrared spectra as well as in their X-ray diffraction patterns, two datasets collected by instruments on currently active Martian missions. These results suggest that UV photooxidation is a plausible contributor to the mineralogy and redox state of clay mineral assemblages observed at the Martian surface.

V. B. Rivera Banuchi↗

Results of the Preliminary Analyses of Asteroid Ryugu Regolith Samples Returned by the Hayabusa2 Mission

The Hayabusa2 spacecraft returned 5.5g of regolith material from asteroid 162173 Ryugu in December 2021. The samples were maintained in near-vacuum conditions up to and even during many analyses, a factor that was critical for comparisons of Ryugu lithologies to meteorites because of ubiquitous terrestrial alteration of the latter. Observations of asteroid Ryugu by the Hayabusa2 spacecraft found that it is spinning, top-shaped rubble pile, formed from re-accretion of a (probably) small subset of fragments from a disrupted parent asteroid. Samples retrieved from Ryugu by the spacecraft during two brief touchdowns were expected to contain a record of this history, including the formation and early evolution of the parent body, its subsequent impact destruction and partial re-accretion, and later space weathering. The composition of Ryugu was expected to be similar to that of naturally-heated Ivuna-type carbonaceous chondrite meteorites (CI chondrites), based on ground- and spacecraft-based spectroscopy. Six preliminary examination teams investigated the formation history of Ryugu through laboratory analysis of the returned samples over the past 18 months. Specifically, we sought to determine (1) when and where in the Solar System the parent asteroid of Ryugu formed; (2) the original mineralogy, bulk elemental abundances, and chemical compositions of the accreted materials; (3) how these materials evolved through chemical and physical processing of the parent asteroid; and (4) how the parent asteroid was disrupted during impact and reaccumulated into Ryugu. This brief report mainly summarizes results from the mineralogy and petrology subteams, although results of the composition and isotope subteams are also mentioned. To address these issues, we analyzed numerous Ryugu particles up to ~8 mm in size.

Michael Zolensky↗

The Payload and Operations of the Hera Mission

On 26 September 2022, NASA’s DART mission successfully impacted on Dimorphos, the secondary of the binary asteroid Didymos. DART released the Light Italian Cubesat for Imaging of Asteroids (LICIACube) two weeks before the impact, and LICIACube flew by the asteroids three minutes after the impact. On approach, DART took images of both asteroids, which, supported by additional imagery from LICIACube, characterized the pre-impact state of the Didymos system. DART changed the orbit of Dimorphos around Didymos, reducing its orbital period by 33 minutes. DART will be followed by a detailed investigation of the Didymos system and the outcome of the impact by ESA’s Hera mission. Hera will be launched in October 2024 and arrive at Didymos in early 2027. The presentation will focus on the payload of the Hera mission and the operations at the asteroid system. The main objectives of the Hera mission are to: - Measure the mass of Dimorphos to accurately measure the momentum transfer efficiency of the DART impact. - Characterise the change of the surface of Dimorphos by DART, including the properties (and existence!) of the DART crater, to improve our understanding of impact physics and to observe unweathered material, recently exposed at the surface. - Determine the physical properties of Dimorphos, including its internal structure, to allow scaling of the impact to different types of asteroids. - Measure the dynamical and physical state of the Didymos and Dimorphos system to constrain binary formation scenarios. Hera is equipped with the following payload: Two Asteroid Framing Cameras (AFCs) for both science and navigation. There resolution is ~10-4 rad/pixel, or 40 cm/pixel for close observations from 4 km. They will provide the target global properties as well as local geomorphology and will investigate the crater and impact site. They will also measure the mass of Dimorphos through the “wobble” motion of Didymos. The Planetary ALTimeter (PALT) will measure the distance to the target and shape and topography information complementary to that from AFC images. The Thermal InfraRed Imager (TIRI) will provide information about the thermal properties of the Didymos system and spectral information in the mid-infrared (6 bands from 7 – 14 µm). The Hyperscout-H hyperspectral imager will provide mineralogical information from 25 spectral bands between 665 and 975 nm. Milani, a 6 unit cubesat, will carry a visible to near-IR imaging spectrometer (ASPECT, 500 – 2500 nm) to derive mineralogical information on the composition of the asteroids, and a thermogravimeter (VISTA) to measure the abundance and constrain the composition of ambient dust particles. Juventas, a 6 unit cubesat, will carry a monostatic low-frequency radar (JuRa), and a gravimeter (GRASS) to derive interior and surface properties of the asteroids. The Radio Science experiment will measure the gravity field of the Didymos system. Measurements of the acceleration of the Hera spacecraft by the asteroid pair through the radio link between Earth and Hera will be used as well as the inter-satellite link between Hera and the two cubesats. We will describe how the goals of Hera will be achieved with the different payload elements.

Michael Küppers↗