Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MARS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

The Geographic Distribution of Boulder Halo Craters at Mid-to-High Latitudes on Mars

Extensive evidence exists for ground ice at mid-to-high latitudes on Mars, including results from neutron spectroscopy [1-3], thermal properties [4-5], geomorphology [e.g., 6-9], and the in situ observations of Mars Phoenix [10]. This ground ice has been hypothesized to be emplaced diffusively and fill pores [11], or to have accumulated by ice and dust deposition that draped or mantled the terrain [7, 12]. These two processes are not mutually exclusive; both potentially have occurred on Mars [5]. One of the landforms found in areas where ground ice is common on Mars are boulder halo craters [e.g., 13-15] (Figure 1), which are topographically muted impact craters that are filled by ice-rich regolith. They are outlined by boulders that trace a circular outline of the original crater rim. Boulder halos generally have distinctly higher boulder densities than the surrounding background plains and have few boulders in their interiors. The mechanism of boulder halo crater formation is somewhat uncertain. Our working model is that an impact event occurs with sufficient size to excavate to a depth greater than the boulder-poor, ice-rich soils. Excavated boulders are deposited around the crater's rim and in its proximal ejecta. Quite rapidly [14], the crater becomes infilled by icy soil. Rather than being buried, boulders in the halo remain at the surface, perhaps be-cause they 'float' relative to finer-grained materials [14, 16]. Regardless of the details of this process, the life-time of boulders at the surface is much greater than the timescale needed to remove most of the craters' topography. Physical weathering of rocks must be greatly out-paced by crater infilling (the opposite of what is typical, e.g., on the Moon [17]). The rapidity of this infilling is easiest to understand if icy mantling material is deposited and accumulates, rather than simply being added by pore filling of soils. If this model is correct, boulder halos only form when they excavate rock-producing materials from beneath the upper surface. Thus, the distribution and size of craters that result in boulders halos may provide in-sight into the thickness of the ice-rich surface layer in different locations. Note that this thickness is necessarily that of the ice-rich layer at the time of impact, not at present. This study is an initial survey of boulder halo crater locations in the 50deg to 80degN and 50deg to 80degS latitude bands on Mars.

Ice↗

Jezero Crater, Mars, as a Compelling Site for Future In Situ Exploration

Jezero is a approximately 45 km diameter impact crater located in the Nili Fossae region of Mars. Jezero is an outstanding site to address key questions of ancient Mars climate, habitability, and volcanic history because: (a) It hosted an open-basin lake during the era of valley network formation [1,2], which ceased at approximately the Noachian-Hesperian boundary [3]. (b) It contains two delta deposits [1,4] with Fe/Mg-smectite and Mg-carbonate sediment [4-7] (the only exposure of lacus-trine shoreline carbonates seen so far on Mars). (c) The depositional environment and mineral assemblage of the delta are promising for the concentration and preservation of organic matter [5,8]. (d) The diverse geologic units in Jezero are in clear stratigraphic context [7]. The Jezero paleolake system has been thoroughly investigated at a variety of scales, including work on: the mineralogy of the delta deposits [4-6] and watershed [7], as well as the morphology and sedimentology of the basin [9] and delta deposits [1,4]. The geologic context of Jezero is also well-studied given the broad suite of alteration minerals exposed in the ancient stratigraphies of the Nili Fossae region [e.g., 6,10-13]. Here we present an overview of the units accessible for exploration in the Jezero basin, including questions and hypotheses that can be tested through analysis in situ and of returned samples. This is particularly timely given the upcoming Mars 2020 mission, for which Jezero is one of the final eight landing sites [14]. Primary science objectives for Mars 2020 are to: (1) characterize the geologic history of a site with "evidence of an astrobiologically-relevant ancient environment and geologic diversity"; (2) assess the habitability and "potential evidence of past life" in units with "high biosignature preservation potential"; and (3) cache scientifically compelling samples for potential return to Earth [15].

Mars↗

Cometary Origin of Atmospheric Methane Variations on Mars Unlikely

The detection of methane in the atmosphere of Mars was first reported in 2004. Since then a number of independent observations of methane have been reported, all showing temporal variability. Up until recently, the origin of methane was attributed to sources either indigenous to Mars or exogenous, where methane is a UV degradation byproduct of organics falling on to the surface. Most recently, a new hypothesis has been proposed that argues that the appearance and variation of methane are correlated with specific meteor events at Mars. Indeed, extraplanetary material can be brought to a planet when it passes through a meteoroid stream left behind by cometary bodies orbiting the Sun. This occurs repeatedly at specific times in a planet's year as streams tend to be fairly stable in space. In this paper, we revisit this latest hypothesis by carrying out a complete analysis of all available data on Mars atmospheric methane, including the very recent data not previously published, together with all published predicted meteor events for Mars. Whether we consider the collection of individual data points and predicted meteor events, whether we apply statistical analysis, or whether we consider different time spans between high methane measurements and the occurrence of meteor events, we find no compelling evidence for any correlation between atmospheric methane and predicted meteor events.

methane↗

Unique, Non-Earthlike, Meteoritic Ion Behavior in Upper Atmosphere of Mars

Abstract Interplanetary dust particles have long been expected to produce permanent ionospheric metal ion layers at Mars, as on Earth, but the two environments are so different that uncertainty existed as to whether terrestrial-established understanding would apply to Mars. The Mars Atmosphere and Volatile EvolutioN (MAVEN) mission made the first in situ detection of the continuous presence of Na+, Mg+, and Fe+ at Mars and indeed revealed non-Earthlike features/processes. There is no separation of the light Mg+ and the heavy Fe+ with increasing altitude as expected for gravity control. The metal ions are well-mixed with the neutral atmosphere at altitudes where no mixing process is expected. Isolated metal ion layers mimicking Earths sporadic E layers occur despite the lack of a strong magnetic field as required at Earth. Further, the metal ion distributions are coherent enough to always show atmospheric gravity wave signatures. All features and processes are unique to Mars.

Meteoritic↗

Reactive Transport and Mass Balance Modeling of the Stimson Sedimentary Formation and Altered Fracture Zones Constrain Diagenetic Conditions at Gale Crater, Mars

On a planet as cold and dry as present-day Mars, evidence of multiple aqueous episodes offers an intriguing view into very different past environments. Fluvial, lacustrine, and eolian depositional environments are being investigated by the Mars Science Laboratory Curiosity in Gale crater, Mars. Geochemical and mineralogical observations of these sedimentary rocks suggest diagenetic processes affected the sediments. Here, we analyze diagenesis of the Stimson formation eolian parent material, which caused loss of olivine and formation of magnetite. Additional, later alteration in fracture zones resulted in preferential dissolution of pyroxene and precipitation of secondary amorphous silica and Ca sulfate. The ability to compare the unaltered parent material with the reacted material allows constraints to be placed on the characteristics of the altering solutions. In this work we use a combination of a mass balance approach calculating the fraction of a mobile element lost or gained, tau, with fundamental geochemical kinetics and thermodynamics in the reactive transport code CrunchFlow to examine the characteristics of multiple stages of aqueous alteration at Gale crater, Mars. Our model results indicate that early diagenesis of the Stimson sedimentary formation is consistent with leaching of an eolian deposit by a near-neutral solution, and that formation of the altered fracture zones is consistent with a very acidic, high sulfate solution containing Ca, P and Si. These results indicate a range of past aqueous conditions occurring at Gale crater, Mars, with important implications for past martian climate and environments.

Gale↗

Mars Sample Return: Grand Challenge for EDL

A year ago, I gave a talk in anticipation of a Mars Sample Return effort at the 9th Ablation Workshop. Since then a lot has happened. "April of this year, after a year of study phase, NASA and ESA (European Space Agency) signed a Statement of Intent (SOI) to jointly develop a Mars Sample Return plan to be submitted to their respective authorities by the end of 2019. This signing is historic, as it signals the desire, the readiness, and the willingness to work together to execute this inspiring mission, we all have the opportunity to tackle this grand challenge. We have the scientific and engineering maturity to identify the critical technologies ready to be applied, and with discipline this campaign can be executed affordably," Jim Watzin, Mars Program Executive, NASA. NASA Centers with JPL (Jet Propulsion Laboratory) leading the charge is in the midst of a pre-formulation phase for executing a Mars Sample Return before the end of next decade. The proposed talk builds on the previous year talk. In light of the agreement between NASA and ESA, NASA has assumed the responsibilities for developing the earth entry vehicle (EEV) that will fly along with a European Spacecraft and return with the sample from Mars. EEV will be deployed for entry into earth. The EEV design, development, testing and certification have to result in a highly reliable sample return system. The entire architecture has to be demonstrated to meet the planetary protection requirement. NASA is considering two distinctly different earth entry vehicle architectures and with each choice, many different ablative TPS (Thermal Protective Shield) candidates. As a result of the NASA-ESA ongoing studies, some of the key entry conditions and design requirements are better understood today and more are being scoped out. The heat-shield ablative TPS choice need to be done with a good understanding as it plays a very significant role in determining the robustness of the EEV. Knowledge about how materials and system perform, and how the features could become flaws and how flaws lead to failure, etc. need to be clearly understood and the knowledge then need to be used to down select the TPS. This proposed talk will provide greater insight into the progress being made and the challenges that need to be tackled.

Mars Sample Return: Grand Challenge for EDL↗

NASA GRC Compass Team Conceptual Point Design and Trades of a Hybrid Solar Electric Propulsion (SEP)/Chemical Propulsion Human Mars Deep Space Transport (DST) Vehicle

NASA has long been conducting studies which apply different in-space propulsion technology assumptions to the mission of sending humans to Mars. Two of the technologies under study that are considered to be the most near-term with respect to technology readiness level (TRL) are traditional chemical propulsion systems and high-power Solar Electric Propulsion (SEP) systems. The benefit of relatively low trip times inherent in using impulsive chemical propulsion systems to perform the full round-trip delta V is hampered by the large propellant mass required to perform these burns for human Mars missions. SEP systems offer the benefit of much lower propellant requirements to perform the same round-trip missions, at the cost of longer trip times. Traditionally, impulsive chemical systems are better suited than SEP when used in a gravity well, and SEP systems are more efficient than traditional impulsive systems when used in interplanetary space. A mission to Mars includes both of these scenarios, and thus several NASA architecture studies performed over the last few years have looked to combine the use of both SEP and chemical propulsion systems where they are the most beneficial to human Mars missions. This combined propulsion system concept has been referred to as a SEP/Chem hybrid Mars Transfer Vehicle and is currently shown as the concept Deep Space Transport (DST) in the March 2017 NASA presentation to the National Aerospace Council (NAC).

human exploration↗

New O+CO2 Scattering Cross Sections and Their Impact on Photochemical Atmospheric Escape of Oxygen from Mars

Dissociative recombination of O2+ and CO2+ molecular ions in the upper atmosphere of Mars is a major source of suprathermal (hot) oxygen atoms. A significant fraction of hot O atoms are sufficiently fast to overcome Mars' gravitational potential and escape to space. This mechanism is known as photochemical escape (PE) and found to be one of the major escape mechanisms presently active on Mars. The Mars Atmosphere and Volatile Evolution Mission (MAVEN) can constrain the PE rate from measurements of electron temperature and density and ion temperature and density. Escape probabilities of hot O can then be constructed from in-situ neutral densities and escaping O flux loss due to collisions with atmospheric background gases. Due to CO2 abundance in the upper atmosphere, O+CO2 scattering is the most important sink of the escaping hot O flux that strongly affects estimates of total atomic oxygen escape rate obtained from MAVEN data, as outlined above. New O+CO2 elastic and inelastic cross sections were constructed from first principles for collision energies from 0.01-5 eV. O(3P)+CO2 collisions were described using new 4D electronic potential energy surfaces (PESs) for restricted geometries. Three lowest triplet states of CO2 were considered for symmetric, bending, and asymmetric vibrational modes. The cross sections were determined from close-coupling calculations performed on individual surfaces using vibrating rotor approximations for CO2 molecule. Differential and momentum transfer cross sections, of use in energy transfer atmospheric models, were also constructed. The obtained cross sections are in excellent agreement with published results. Our new elastic cross sections are significantly smaller than assumed in earlier atmospheric escape models, resulting in larger photochemical escape rate of O from Mars, as estimated from a 1D escape model. Our results agree well with estimated hot O flux (about 9 x 10(sup 25) s(sup -1)) derived from altitude profiles of 130.4 nm O emission measured up to ~4,000 km by the Imaging Ultraviolet Spectrograph on MAVEN orbiter.

Atmospheric↗

Towards the Prediction of the Mars 2020 Heatshield Material Response

Introduction: NASA’s next mission to Mars, the Mars 2020, will use the same heatshield of the Mars Science Laboratory (MSL) for thermal protection during entry, descent and landing. The heatshield is a tiled system made of Phenolic Impregnated Carbon Ablators (PICA) blocks [1]. PICA is a lightweight carbon fiber/polymeric resin material that offers excellent performances for protecting probes during planetary entry. The Mars Entry Descent and Landing Instrument (MEDLI) suite on MSL offers unique in-flight validation data for models of atmospheric entry and material response. MEDLI recorded, among others, time-resolved in-depth temperature data of PICA using thermocouple sensors assembled in the MEDLI Integrated Sensor Plugs (MISP). The objective of this work is to compare the thermal response of the MSL heatshield to the MISP flight data. In preparation to Mars 2020 post-flight analysis, the predictive material response capability is benchmarked against MEDLI flight data.

heatshield↗

Chapter 6: Sulfur on Mars from the Atmosphere to the Core

Observations of the martian surface from orbiting spacecraft and in situ landers and rovers, as well as analyses of martian meteorites in terrestrial laboratories, have consistently indicated that Mars is a sulfur-rich planet. The global inventory of sulfur, from the atmosphere to the core, carries widespread implications of potential geophysical, geochemical, climatological, and astrobiological significance. For example, the sulfur content of the core carries implications for core density; the speciation of igneous sulfur minerals reflects the oxidation state of the magma from which they formed; sulfur-bearing gases may have exerted control on the temperatures at the surface of early Mars; and the widespread availability of sulfur on Mars would have provided an abundant source for energy and nutrients to fuel sulfur-metabolizing microbes, such as those that arose during the emergence of primitive life on Earth. Here we provide an overview of martian sulfur and its relevance to these areas of interest, including a discussion of analytical techniques and results acquired by space missions and meteorite analyses to date. We review current studies modeling the potential effects of sulfur-bearing gases on the past martian climate and possible constraints on atmospheric composition implied by sulfur isotopic data. We also explore the importance of sulfur to the search for extinct or extant life on Mars. Finally, we summarize a few areas of interest to future work, including advances in space exploration technology and preparation for Mars sample return.

Climate↗

Searching for Life on Mars: The Contamination Paradox

As we search for life on Mars, we will be simultaneously contaminating Mars with life from Earth. The contamination from Earth could be mistaken for Martian life. How can this paradox be avoided? With the results of our research, the scientific community will be able to determine locations of future habitats that minimize the aerial extent subject to bio-contaminants, protect sites of astrobiological interest, and constrain landing site selection of life detection missions to reduce risk of false positives. We consider a putative human habitat on Mars. Biological contaminants will flow out of the habitat into the Martian atmosphere, and the atmosphere will move these contaminants around. How many biological particles per year will be released from the habitat into the Martian ambient environment? How far will the contamination travel? In what directions will it travel? How long will the contamination be in the atmosphere? We study these questions quantitatively by simulating the Martian atmosphere using the NASA Ames Mars Global Climate Model. Various combinations of human habitat locations and contaminant sizes are considered. The results from these simulations enable the creation of novel contamination heat maps showing the aerial distribution of contaminants from putative human habitats on Mars.

Contamination↗

The Biological Potential of Present-day Mars

In the mid-1970s the twin Viking Landers conducted three biological experiments in two different locations on the surface of Mars. Results from these experiments did not provide conclusive evidence of biological activity, and instead they were consistent with abiotic chemical reactions in the regolith. The paradigm established by the Viking missions is that the near-surface environment on Mars is too cold, dry, and hostile for life as we know it. Our understanding of the limits of metabolic activity and growth in terrestrial organisms, together with ecological studies in terrestrial analog environments, some of which approximate the temperature and dryness conditions on Mars, seem to support this view. But data gathered by surface and orbital assets in the past two decades suggests that liquid water could still be an important agent of landscape evolution over timescales ranging from seasons to millions of years. In addition, the tantalizing discovery of both liquid water buried deep beneath the southern polar deposits and fluctuating levels of methane in the atmosphere make the existence of a subsurface biosphere both possible and realistic. These discoveries have sparked a renewed interest on the biological potential of present-day Mars, and the possibility of extant life. This chapter reviews the environmental aspects most relevant to the biological potential of present-day Mars, emphasizing the near-surface environment that will be sampled and investigated by future robotic missions.

Life↗

An Advanced Mars Helicopter Design

Ingenuity may be the first of many Mars aerial vehicles. Rotorcraft increase the range and speed that can be traveled to locations of interest. This enables mission concepts previously considered not viable on Mars, such as missions performing science investigations in regions of high elevation, steep terrain, caves/lava tubes, and surveys of the lower atmosphere. Recent work done at NASA Ames Research Center and NASA’s Jet Propulsion Laboratory (JPL) show that significant science can be performed by rotorcraft either independently or as assistants to rovers and landers. Small rotorcraft of Ingenuity’s general size can be potentially integrated into missions already scheduled for launch. Additionally, larger rotorcraft can support standalone novel mission concepts but are still be able to be sized and configured for deployment from heritage entry, descent, and landing (EDL) systems. One such mission concept of interest is to determine if organics are associated with clay-bearing or silica-rich soil. For such a mission, a small rotorcraft “robotic assistant” to a lander or rover could help determine if ancient sediment contains biosignatures in regions such as Mawrth Vallis. Ingenuity has demonstrated that rotorcraft can be developed relatively quickly and inexpensively and increase the types and amount of science that can be performed on any given mission. Recent research has suggested that rotorcraft of Ingenuity’s general size can have their performance characteristics significantly enhanced – increasing their range, speed, and payload capacity – by using new generation rotor blade airfoils optimized for Mars operating conditions. Rotorcraft could potentially be a standard adjunct to all future lander and rover missions. This paper presents an advanced Mars helicopter design that leverages significantly the design heritage of the Ingenuity Mars Helicopter Technology Demonstrator (MHTD).

Advanced↗

A Study of Past, Present, and Future Mars Rotorcraft

Interest in utilizing rotorcraft to explore Mars is expected to increase following the anticipated successful technical demonstration of the Mars Helicopter, Ingenuity, during the Mars 2020 mission. Previously, science investigations have been limited by either the instrumentation resolution on orbiters or the roughness/accessibility of terrain a rover can traverse. Rotorcraft can enable low-altitude flight over and on-surface exploration at previously inaccessible locations. This paper describes potential mission concepts designed to utilize the unique capabilities of rotorcraft to advance the science performed in extraterrestrial environments. This includes missions tailored for investigating if Mars ever supported life, understanding climate processes and history, determining the evolution of Martian geology, and preparing for human exploration. The Mars rotorcraft mission concepts described in this paper can be divided into two categories: rover-assisted missions and independent (rotorcraft-only) missions. A number of concept vehicles, consistent with these proposed missions, are also discussed.

Study↗

Predicted Performance Effects of Blade Elasticity on Testing of Rotors for Mars

The Rotor Optimization for the Advancement of Mars Exploration project (ROAMX) has designed and manufactured a set of rotor blades optimized for hover on Mars. These blades will soon be tested for hover performance in the NASA Ames Research Center Planetary Aeolian Laboratory, a large vacuum chamber capable of rotor testing at reduced pressures. To match the tip Mach numbers during this testing with the tip Mach numbers that would be experienced in the Martian atmosphere, the rotor will be spun faster in the vacuum chamber than it would be spun on Mars. While this accomplishes the goal of simulating the tip Mach numbers of Mars operations, the elevated RPM may have undesired consequences for performance, due to elastic deflections of the blades. The purpose of this paper is to use CAMRAD II, a rotorcraft comprehensive analysis code, to predict the effect on performance of blade elasticity at elevated RPM in the vacuum chamber environment. Results are presented for different thrust conditions and different rotor speeds, and comparisons are made between rigid and elastic blade predictions. Overall, the CAMRAD II analysis suggests that blade elasticity does influence rotor performance in the operating conditions of interest, although the effect is moderate enough to conclude that the PAL testing will be a good simulation of Mars operation.

Blade elasticity↗

Reactive Transport and Mass Balance Modeling of the Stimson Sedimentary Formation and Altered Fracture Zones Constrain Diagenetic Conditions at Gale Crater, Mars

On a planet as cold and dry as present-day Mars, evidence of multiple aqueous episodes offers an intriguing view into very different past environments. Fluvial, lacustrine, and eolian depositional environments are being investigated by the Mars Science Laboratory Curiosityin Gale crater, Mars. Geochemical and mineralogical observations of these sedimentary rocks suggest diagenetic processes affected the sediments. Here, we analyze diagenesis of the Stimson formation eolian parent material, which caused loss of olivine and formation of magnetite. Additional, later alteration in fracture zones resulted in preferential dissolution of pyroxene and precipitation of secondary amorphous silica and Ca sulfate. The ability to compare the unaltered parent material with the reacted material allows constraints to be placed on the characteristics of the altering solutions. In this work we use a combination of a mass balance approach calculating the fraction of a mobile element lost or gained, τ, with fundamental geochemical kinetics and thermodynamics in the reactive transport code CrunchFlow to examine the characteristics of multiple stages of aqueous alteration at Gale crater, Mars. Our model results indicate that early diagenesis of the Stimson sedimentary formation is consistent with leaching of an eolian deposit by a near-neutral solution, and that formation of the altered fracture zones is consistent with a very acidic, high sulfate solution containing Ca, P and Si. These results indicate a range of past aqueous conditions occurring at Gale crater, Mars, with important implications for past Martian climate and environments.

Gale crater↗

Diurnal Waves Forced By Horizontal Convergence of Near-Surface Winds on Mars

Boundary-layer winds near steeply sloped topography excite a distinct type of atmospheric wave. Basic properties of the waves were determined through analysis of 7 Mars years of temperature profiles from the Mars Climate Sounder on Mars Reconnaissance Orbiter. A more complete understanding of the waves was derived from a simulation with the NASA Ames Mars General Circulation Model. This type of wave appears in the tropics in the vicinity of conspicuous surface features, such as large volcanoes and the rim of Isidis Planitia. The amplitude is typically 5–10 K, the vertical wavelength is about 40 km, the zonal wavelength is about 1400 km, and the zonal phase speed relative to the surface is about 25 m s−1. The wave forcing comes from horizontal convergence of the near-surface winds, which generates a daily surge in the vertical winds. These convergence zones were not previously recognized as an important source of atmospheric waves on Mars. Strong forcing occurs only within a limited range of local time, producing wave packets (diurnal pulses) rather than steady oscillations. Waves are present throughout the year and their properties vary with season. Near the solstices, the wave amplitude is largest in the tropics of the summer hemisphere, where the convergence zones are stronger than in the winter hemisphere. The diurnal-mean zonal winds, which vary with latitude and season, control the direction of propagation of the predominant waves through filtering by critical levels.

Mars↗

NASA Capture, Containment, and Return System: Bringing Mars Samples to Earth

The Capture, Containment, and Return System (CCRS) project is NASA’s last step in bringing back Mars samples. CCRS will close a decades-long multi-mission and multi-agency effort to bring Mars surface samples back to Earth for scientific studies. CCRS will launch in 2027 on the European Earth Return Orbiter (ERO) spacecraft, which will provide communications relay for the Mars Sample Return ground missions, Perseverance rover and the Sample Retrieval Lander (SRL) (to be launched in 2028). The main mission for CCRS begins when the first-ever orbital planetary capture operation occurs with CCRS catching and securing the Orbiting Sample (OS)in low Mars orbit. From this point, the system will perform additional "firsts": it will autonomously contain the OS with heat-shrink-fit, sterilize the outside surface, and assemble the Earth entry capsule, named Earth Entry System (EES), in orbit around Mars using a gantry mechanism. At approximately 2.8 Lunar distances from Earth, or 3-days from entry into Earth’s atmosphere, CCRS will open its micrometeoroid shield and release the EES on a ballistic trajectory to Earth. The EES is designed to be a fully passive system that will enter the atmosphere and land without parachute at the Utah Test and Training Range (UTTR).

Mars mission, Sample return, Mission design↗