Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC INSULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Anomalous magnetoresistance by breaking ice rule in Bi2Ir2O7/Dy2Ti2O7 heterostructure

Abstract While geometrically frustrated quantum magnets host rich exotic spin states with potentials for revolutionary quantum technologies, most of them are necessarily good insulators which are difficult to be integrated with modern electrical circuit. The grand challenge is to electrically detect the emergent fluctuations and excitations by introducing charge carriers that interact with the localized spins without destroying their collective spin states. Here, we show that, by designing a Bi 2 Ir 2 O 7 /Dy 2 Ti 2 O 7 heterostructure, the breaking of the spin-ice rule in insulating Dy 2 Ti 2 O 7 leads to a charge response in the conducting Bi 2 Ir 2 O 7 measured as anomalous magnetoresistance during the field-induced Kagome ice-to-saturated ice transition. The magnetoresistive anomaly also captures the characteristic angular and temperature dependence of this ice-rule-breaking transition, which has been understood as magnetic monopole condensation. These results demonstrate a novel heteroepitaxial approach for electronically probing the transition between exotic insulating spin states, laying out a blueprint for the metallization of frustrated quantum magnets.

36 MATERIALS SCIENCE↗

Giant Doping Response of Magnetic Anisotropy in MnTe

Developing simple ways to control spin states in spintronic devices is a crucial step towards increasing their functionality. MnTe is a room-temperature antiferromagnet with promising spintronic properties, including for thermospintronics and magnon-based devices. Here, we show that, in MnTe, less than 1% Li is sufficient to produce a dramatic spin reorientation as observed by neutron diffraction. The behavior of the 0001 magnetic Bragg peak reveals a significant reorientation of the Mn spins from planar in the pure material to almost completely axial with minimal Li doping. Temperature dependence of the magnetic peaks in Li-doped samples indicates that axial spins shift back to planar suddenly upon approaching the Néel temperature (T N = 307 K). Density functional theory calculations support the idea that a shift in the Fermi level caused by doping is responsible for switching the material between two competing magnetic ground states. These results pave the way for developing easy switching of magnetic states in functional materials such as spintronic devices and topological insulators.

36 MATERIALS SCIENCE↗

Enhancement of Thermopower by Structural Asymmetry in Double-Barrier Tunnel Junctions

Thermopower is studied in double-barrier magnetic tunnel junctions (DBMTJs) with a non-magnetic metal (NM) spacer by considering structural asymmetry—related to the different thicknesses of the MgO insulators—in the linear response regime. Using non-equilibrium Green’s function (NEGF) formalism, it is found that the thermopower is larger in the case with thicker left insulator than the other cases which is related to the voltage drop within the insulator layer. The thermopower has shown its maximum value as large as S = 482μ V/K in the anti-parallel configuration of the magnetizations and T = 300K. Therefore, it is possible to achieve the large thermopower in the thermoelectric devices based on MTJs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DEVELOPMENT OF A 300 KV DC HIGH VOLTAGE PHOTOGUN AND BEAM BASED STUDIES OF ALKALI NTIMONIDE PHOTOCATHODES

To advance magnetized gun research in the United States, a compact DC high voltage photogun with inverted-insulator geometry was designed, built, and operated reliably at 300 kV bias voltage using alkali-antimonide photocathodes. This photogun will provide a magnetized electron beam for the future Jefferson Lab Electron-Ion Collider (JLEIC) cooler. This research describes key electrostatic design features of the photogun and evaluates the performance of the in-house fabricated photocathodes and the quality of the electron beams. The thermal emittance of the electron beam was measured with various conditions: differ?ent gun bias voltages, different laser spot sizes, and photocathodes with different substrate materials. It has been hypothesized that the photocathode surface roughness affects the quality of the photocathodes and the electron beam produced, which is directly related to the thickness of the antimony layer of the photocathode. This effect was studied experimen?tally for both the beam emittance and photocathode quantum efficiency lifetime, and the measurements indicate that the beam emittance is largely independent of the antimony layer thickness, and the lifetime benefits from a thick layer. The ion bombardment always poses a problem for the photocathodes during high current beam operations. An effective way to repel the beam-induced ions was identified and implemented, and a sustainable 28 mA beam was achieved from the gun. This thesis presents a good performance of the photogun, a remarkable quantum efficiency lifetime of the photocathodes and a low emittance of the electron beam.

Wang, Yan↗

Interlayer RKKY coupling in bulk Rashba semiconductors under topological phase transition

The bulk Rashba semiconductors BiTeX (X=I, Cl and Br) with intrinsically enhanced Rashba spin-orbit coupling provide a new platform for investigation of spintronic and magnetic phenomena in materials. We theoretically investigate the interlayer exchange interaction between two ferromagnets deposited on opposite surfaces of a bulk Rashba semiconductor BiTeI in its trivial and topological insulator phases. In the trivial phase BiTeI, we find that for ferromagnets with a magnetization orthogonal to the interface, the exchange coupling is reminiscent of that of a conventional three-dimensional metal. Remarkably, ferromagnets with a magnetization parallel to the interface display a magnetic exchange qualitatively different from that of conventional three-dimensional metal due to the spin-orbit coupling. In this case, the interlayer exchange interaction acquires two periods of oscillations and decays as the inverse of the thickness of the BiTeI layer. For topological BiTeI, the magnetic exchange interaction becomes mediated only by the helical surface states and acts between the one-dimensional spin chains at the edges of the sample. The surface state-mediated interlayer exchange interaction allows for the coupling of ferromagnets with non-collinear magnetization and displays a decay power different from that of trivial BiTeI, allowing the detection of the topological phase transition in this material. Our work provides insights into the magnetic properties of these newly discovered materials and their possible functionalization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetoelectric control of topological phases in graphene

Topological antiferromagnetic (AFM) spintronics is an emerging field of research, which involves the topological electronic states coupled to the AFM order parameter known as the Néel vector. The control of these states is envisioned through manipulation of the Néel vector by spin-orbit torques driven by electric currents. In this work, we present a different approach favorable for low-power AFM spintronics, where the control of the topological states in a two-dimensional material, such as graphene, is performed via the proximity effect by the voltage induced switching of the Néel vector in an adjacent magnetoelectric AFM insulator, such as chromia. Mediated by the symmetry protected boundary magnetization and the induced Rashba-type spin-orbit coupling at the interface between graphene and chromia, the emergent topological phases in graphene can be controlled by the Néel vector. Using density functional theory and tight-binding Hamiltonian approaches, we model a graphene / Cr 2 O 3 (0001) interface and demonstrate nontrivial band gap openings in the graphene Dirac bands asymmetric between the K and K ' valleys. This gives rise to an unconventional quantum anomalous Hall effect (QAHE) with a quantized value of 2 e 2 / h and an additional steplike feature at a value close to e 2 / 2 h , and the emergence of the spin-polarized valley Hall effect (VHE). Additionally, depending on the Néel vector orientation, we predict the appearance and transformation of different topological phases in graphene across the 180° AFM domain wall, involving the QAHE, the valley-polarized QAHE, and the quantum VHE, and the emergence of the chiral edge states along the domain wall. These topological properties are controlled by voltage through magnetoelectric switching of the AFM insulator with no need for spin-orbit torques.

36 MATERIALS SCIENCE↗

Inducing Kondo screening of vacancy magnetic moments in graphene with gating and local curvature

In normal metals the magnetic moment of impurity-spins disappears below a characteristic Kondo temperature which marks the formation of a cloud of conduction-band electrons that screen the local-moment. In contrast, moments embedded in insulators remain unscreened at all temperatures. What then is the fate of magnetic-moments in intermediate, pseudogap systems, such as graphene? Theory predicts that coupling to the conduction-band electrons will drive a quantum phase transition between a local-moment phase and a Kondo-screened phase. However, attempts to experimentally confirm this prediction and its intriguing consequences, such as electrostatically tunable magnetic-moments, have been elusive. Here we report the observation of Kondo-screening and the quantum phase-transition between screened and unscreened phases of vacancy magnetic moments in graphene. Using scanning tunneling spectroscopy and numerical renormalization-group calculations we show that this transition enables to control the screening of local moments by tuning the gate voltage and the local curvature of the graphene membrane.

36 MATERIALS SCIENCE↗

Magnetic field induced partially polarized chiral spin liquid in a transition metal dichalcogenide moiré system

As one of the most intriguing states of matter, the chiral spin liquid (CSL) has attracted much scientific interest while its existence and mechanism in crystalline strongly correlated systems remain hotly debated. On the other hand, strong correlation driven emergent phenomena can be realized in twisted transition metal dichalcogenide bilayers with a tremendously tunable large length scale providing a new platform for the emergence of CSLs. Here, we focus on a strongly correlated model relevant to heterobilayer WSe 2 /MoSe 2 and investigate the Mott insulating phase at half filling under an out-of-plane magnetic field. Considering both its orbital and spin Zeeman effects we identify three conventionally ordered phases including a 120° Néel phase, a stripe phase, and an up-up-down phase. For intermediate fields an emergent quantum spin liquid phase is identified with partial spin polarization. We further characterize its topological nature as the v = 1/2 Laughlin CSL through the topological entanglement spectrum and quantized spin pumping under spin flux insertion. In addition, we map out the quantum phase diagram for different twisted angles in an experimentally accessible parameter regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic-field induced crossover of superconducting percolation regimes in the layered organic Mott system {kappa}-(BEDT-TTF){sub 2}Cu[N(CN){sub 2}]Cl.

Fluctuation spectroscopy is used to investigate the organic bandwidth-controlled Mott system {kappa}-(BEDT-TTF){sub 2}Cu[N(CN){sub 2}]Cl. We find evidence for percolative-type superconductivity in the spatially inhomogeneous coexistence region of antiferromagnetic insulating and superconducting states. When the superconducting transition is driven by a magnetic field, percolation seems to be dominated by instable superconducting clusters upon approaching T{sub c}(B) from above, before a 'classical' type of percolation is resumed at low fields, dominated by the fractional change of superconducting clusters. The 1/f noise is resolved into Lorentzian spectra in the crossover region, where the action of an individual fluctuator is enhanced, pointing to a mesoscopic phase separation.

36 MATERIALS SCIENCE↗

Oscillations of the thermal conductivity in the spin-liquid state of α-RuCl 3

In the class of materials called spin liquids a magnetically ordered state cannot be attained even at millikelvin temperatures because of conflicting constraints on each spin; for example, from geometric or exchange frustration. The resulting quantum spin-liquid state is currently of intense interest because it exhibits unusual excitations as well as wave-function entanglement. The layered insulator α-RuCl 3 orders as a zigzag antiferromagnet at low temperature in zero magnetic field. The zigzag order is destroyed when a magnetic field is applied parallel to the zigzag axis. At moderate magnetic field strength, there is growing evidence that a quantum spin-liquid state exists. Here we report the observation of oscillations in its thermal conductivity in that field range. The oscillations, whose amplitude is very large within this field range and strongly suppressed on either side, are periodic. This is analogous to quantum oscillations in metals, even though α-RuCl 3 is an excellent insulator with a large gap. As the temperature is raised above 0.5 K, the oscillation amplitude decreases exponentially, anticorrelating with the emergence of an anomalous planar thermal Hall conductivity above approximately 2 K.

36 MATERIALS SCIENCE↗

Interplay between spin-orbit coupling and strong correlation effects: Comparison of the three osmate double perovskites Ba 2 AOsO 6 (A=Na, Ca, Y)

High formal valence Os-based double perovskites are a focus of current interest because they display strong interplay of large spin-orbit coupling and strong electronic correlation. Here we present the electronic and magnetic characteristics of a sequence of three cubic Os based double perovskites Ba 2 AOsO 6 (A=Na, Ca, Y), with formal valences of Os +7 (d 1 ),Os +6 (d 2 ), and Os +5 (d 3 ). For these first principles based calculations we apply an “exact exchange for correlated electrons” functional, with exact exchange applied in a hybrid fashion solely to the Os (5d) states. While Ba 2 NaOsO 6 is a reported ferromagnetic Dirac-Mott insulator studied previously, the other two show antiferromagnetic ordering while all retain the undistorted cubic structure. For comparison purposes we have investigated only the ferromagnetic ordered phase. A metal-insulator transition is predicted to occur upon rotating the direction of magnetization in all three materials, reflecting the central role of spin-orbit coupling in these small gap osmates. Surprises arising from comparing formal charge states with the radial charge densities are discussed. Chemical shielding factors and orbital susceptibilities are provided for comparison with future nuclear magnetic resonance data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superconducting Fourfold Fe(Te,Se) Film on Sixfold Magnetic MnTe via Hybrid Symmetry Epitaxy

Epitaxial Fe(Te,Se) thin films have been grown on various substrates but never been grown on magnetic layers. In this work, we report the epitaxial growth of fourfold Fe(Te,Se) film on a sixfold antiferromagnetic insulator, MnTe. The Fe(Te,Se)/MnTe heterostructure shows a clear superconducting transition at around 11 K, and the critical magnetic field measurement suggests the origin of the superconductivity to be bulk-like. Structural characterizations suggest that the uniaxial lattice match between Fe(Te,Se) and MnTe allows a hybrid symmetry epitaxy mode, which was recently discovered between Fe(Te,Se) and Bi 2 Te 3 . Furthermore, the Te/Fe flux ratio during deposition of the Fe(Te,Se) layer is found to be critical for its superconductivity. Now that superconducting Fe(Te,Se) can be grown on two related hexagonal platforms, Bi 2 Te 3 and MnTe, this result opens a new possibility of combining topological superconductivity of Fe(Te,Se) with the rich physics in the intrinsic magnetic topological materials (MnTe) n (Bi 2 Te 3 ) m family.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hybridization-driven gap in U3Bi4Ni3: a 209Bi NMR/NQR study

We report {sup 209}Bi nuclear-magnetic-resonance and nuclear-quadrupole-resonance measurements on a single crystal of the Kondo insulator U{sub 3}Bi{sub 4}Ni{sub 3}. The {sup 209}Bi nuclear-spin-lattice relaxation rate (T{sub 1}{sup -1}) shows activated behavior and is well fit by a spin gap of 220 K. The {sup 209}Bi Knight shift (K) exhibits a strong temperature dependence arising from 5f electrons, in which K is negative at high temperatures and increases as the temperature is lowered. Below 50 K, K shows a broad maximum and decreases slightly upon further cooling. Our data provide insight into the evolution of the hyperfine fields in a fully gapped Kondo insulator based on 5f electron hybridization.

36 MATERIALS SCIENCE↗

The application of macroscopic flakes for Fe-6.5%Si bulk magnetics with superior magnetic properties

Inductors are used in power electronics to convert current to different frequency and voltage. They are used extensively from where power is generated all the way to electric vehicles and portable electronic devices. The soft magnetic materials used in the inductors is critical for the performance of the inductors. Currently, a majority of the inductor uses powder core. The use of powder is not ideal as the 3D granule powders generate large demagnetization field working against the applied field, resulting in reduced permeability and efficiency. In this paper, 2D flakes were used to replace the 3D granules as the feedstock for fabricating inductor core. The crystalline Fe-Si based crystalline soft magnetic material in the form of flakes approximately 0.1mm thick, 1mm long and 2mm wide were prepared via melt spinning. The flakes were then coated with insulating materials before compacted into a toroid. The effect of coating thickness and concentration on magnetic properties of the toroidal sample are studied. It was also found that the magnetic cores made by flakes surpass the cores made by same size powder with larger permeability and lower iron losses.

Fe-6.5%Si Steel↗

Tuning of carrier type, enhancement of Linear magnetoresistance and inducing ferromagnetism at room temperature with Cu doping in Bi2Te3 Topological Insulators

Highlights: • With Cu doping in Bi{sub 2}Te{sub 3}, resistivity increases as Fermi level is shifted into valence band with extra scattering centers. • Cu doping tunes the carrier from n to p type, which is attributed to the presence of Te{sub Bi} and Bi{sub Te} antisites. • The observed Linear Magneto resistance is believed to be associated with gapless linear energy spectrum of surface Dirac Fermions. • Cu doping induces room temperature ferromagnetism. - Abstract: Structural, resistivity, thermoelectric power, magneto-transport and magnetic properties of Cu doped Bi{sub 2}Te{sub 3} topological insulators have been investigated. The tuning of charge carriers from n to p type by Cu doping at Te sites of Bi{sub 2}Te{sub 3} is observed both from Hall effect and thermoelectric power measurements. Carrier mobility decreases with the doping of Cu which provides evidence of the movement of Fermi level from bulk conduction band to the bulk valence band. Thermoelectric power also increases with doping of Cu. Moreover, linear magnetoresistance (LMR) is observed at high magnetic field in pure Bi{sub 2}Te{sub 3} which is associated to the gapless topological surface states protected by time reversal symmetry (TRS). Furthermore, doping of non-magnetic Cu induces ferromagnetism at room temperature and also enhances the magnetoresistance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanical Design of the PIP-II ORBUMP Pulsed Dipole Magnet

The Proton Improvement Plan-II (PIP-II) is a vital upgrade to Fermilab's accelerator complex. The upgrade is designed to power the world s most intense high-energy neutrino beam in future experiments. The magnet pulse repetition rate of the PIP-II injection system is being upgraded from 15 Hz to 20 Hz and requires a roughly 30% increase in the magnetic field of the new Orbital Bump (ORBUMP) magnets in the Booster. The magnet is secured in a vacuum box and the core is made up of 0.127 mm thick, low carbon steel laminations with a C-5 inorganic coating. The core is clamped using external tie bars welded to the core end plates. ANSYS Finite Element Analysis (FEA) was used to evaluate the clamping design to minimize the deflection of the core post welding of the tie bars. The water-cooled single turn coil is electrically isolated from the core using virgin PEEK insulating material in the gap. An investigation into the high voltage performance of the virgin PEEK insulator was conducted. The design of the coil which shapes the magnetic field by acting as the pole tips is critical for the integrated field homogeneity. The coil manufacturing tolerances and fabrication techniques were evaluated to ensure the magnetic properties of the magnet could be obtained. The ORBUMP magnet mechanical design is presented in this paper.

Karas, Dino [Fermilab] (ORCID:0000000304340670)↗

Shubnikov–de Haas oscillations of biaxial-strain-tuned superconductors in pulsed magnetic field up to 60 T

Two-dimensional (2D) materials have gained increasing prominence not only in fundamental research but also in daily applications. However, to fully harness their potential, it is crucial to optimize their properties with an external parameter and track the electronic structure simultaneously. Magnetotransport over a wide magnetic field range is a powerful method to probe the electronic structure and, for metallic 2D materials, quantum oscillations superimposed on the transport signals encode Fermi surface parameters. In this manuscript, we utilize biaxial strain as an external tuning parameter and investigate the effects of strain on the electronic properties of two quasi-2D superconductors, MoTe 2 and RbV 3 Sb 5 , by measuring their magnetoresistance in pulsed magnetic fields up to 60 T. With a careful selection of insulating substrates, we demonstrate the possibility of both the compressive and tensile biaxial strains imposed on MoTe 2 and RbV 3 Sb 5 , respectively. For both systems, the applied strain has led to superconducting critical temperature enhancement compared to their free-standing counterparts, proving the effectiveness of this biaxial strain method at cryogenic temperatures. Clear quantum oscillations in the magnetoresistance—the Shubnikov–de Haas (SdH) effect—are obtained in both samples. In strained MoTe 2 , the magnetoresistance exhibits a nearly quadratic dependence on the magnetic field and remains non-saturating even at the highest field, whereas in strained RbV 3 Sb 5 , two SdH frequencies showed a substantial enhancement in effective mass values, hinting at a possible enhancement of charge fluctuations. Our results demonstrate that combining biaxial strain and pulsed magnetic field paves the way for studying 2D materials under unprecedented conditions.

2D materials↗

Shubnikov-de Haas oscillations of biaxial-strain-tuned superconductors in pulsed magnetic field up to 60 T

Two-dimensional (2D) materials have gained increasing prominence not only in fundamental research but also in daily applications. However, to fully harness their potential, it is crucial to optimize their properties with an external parameter and track the electronic structure simultaneously. Magnetotransport over a wide magnetic field range is a powerful method to probe the electronic structure and, for metallic 2D materials, quantum oscillations superimposed on the transport signals encode Fermi surface parameters. In this manuscript, we utilize biaxial strain as an external tuning parameter and investigate the effects of strain on the electronic properties of two quasi-2D superconductors, MoTe 2 and RbV 3 Sb 5 , by measuring their magnetoresistance in pulsed magnetic fields up to 60 T. With a careful selection of insulating substrates, we demonstrate the possibility of both the compressive and tensile biaxial strains imposed on MoTe 2 and RbV 3 Sb 5 , respectively. For both systems, the applied strain has led to superconducting critical temperature enhancement compared to their free-standing counterparts, proving the effectiveness of this biaxial strain method at cryogenic temperatures. Clear quantum oscillations in the magnetoresistance—the Shubnikov–de Haas (SdH) effect—are obtained in both samples. In strained MoTe 2 , the magnetoresistance exhibits a nearly quadratic dependence on the magnetic field and remains non-saturating even at the highest field, whereas in strained RbV 3 Sb 5 , two SdH frequencies showed a substantial enhancement in effective mass values, hinting at a possible enhancement of charge fluctuations. Our results demonstrate that combining biaxial strain and pulsed magnetic field paves the way for studying 2D materials under unprecedented conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗