SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
We use quantum Monte Carlo (QMC) methods to perform exact ab-initio calcula1ons of the nuclear equation of state (EOS) and the symmetry energy. We employ local chiral interactions up to next-to-next-to leading (N 2 LO) fit to few-body observables only, and provide a comprehensive uncertainty quantifica1on.
Focal Area: (2) Predictive modeling through the use of AI techniques and AI-derived model components. (3) Insight gleaned from complex data using AI, big data analytics, and other advanced methods. We propose an AI-enabled model-experiment (MODEX) framework to improve the predictability of subsurface water storage (SWS) from local to conus scales in a changing environment by taking advantage of DOE’s observation and simulation capabilities, as well as to inform the model and the observation development.
This is the final report for DOE Grant DE-FG02-08ER54984. The overall goal of this project was to develop the cross-polarization scattering (CPS) diagnostic to measure core localized magnetic turbulence in fusion research devices. Section 1 provides a brief overview of project objectives and accomplishments. Section 2 gives a more detailed description of the Project accomplishments.
Multi-resolution global ocean simulations are possible with the Model for Prediction Across Scales-Ocean (MPAS-Ocean), although the model is currently constrained to a uniform time step. The time step is determined by the size of the smallest cell in the grid, according to the CFL condition. To overcome this issue, a local time stepping (LTS) scheme has been designed for MPAS-Ocean. We have made progress on implementing the LTS scheme, as well as quantitative results and performance tests.
We examined the feasibility of using fiber-optic Distributed Acoustic Sensing (DAS) as an alternative to a traditional seismic array. Seismic arrays are used routinely globally to measure waveform propagation parameters and signal features including back-azimuth (BAZ) and apparent horizontal velocity through the process of beamforming or frequency-wavenumber (f-k) array analysis with the assumption that the signals travel across the array as a plane-wave. These measurements are useful for identifying signal detections as teleseismic, regional, or local distance seismic phases based on their velocities traveling across the array (e.g., Rost and Thomas, 2001). Signal enhancement is the main benefit of array processesing through the stacking of multiple channels as a phased array. This enhancement increases as the square root of the number of channels relative to a single seismic station (e.g., Rost and Thomas, 2001), which is a factor of 3 from a typical nine-channel array. DAS provides the potential of stacking waveforms from 100’s to 1000’s of channels. However, DAS is a novel technology designed for geophysical exploration and therefore has some limitations which we will explore. We started with the dataset from the PoroTomo project because of its unique experimental layout of colocated geophone array and DAS deployment so the two recording technologies can be compared side-by-side.
A technique called the splice method for coupling local to peridynamic subregions of a body is described. The method relies on ghost nodes, whose values of displacement are interpolated from nearby physical nodes, to make each subregion visible to the other. In each time step, the nodes in each subregion treat the nodes in the other subregion as boundary conditions. Adaptively changing the subregions is possible through the creation and deletion of ghost nodes. Example problems in 2D and 3D illustrate how the method is used to perform multiscale modeling of fracture and impact events within a larger structure.
Develop an efficient parallel implementation and assess the performance of local time-stepping (LTS) schemes for the shallow water equations in the Model for Prediction Across Scales (MPAS).
ATC has successfully developed a new method for making high-performance Bi-2212/Ag su-perconducting wire with a favorable local area ratio (LAR)=Ag:Bi-2212. The method begins by texturing a fine powder of Bi-2212: the powder is loaded uniformly into an open-sided silver foil channel, the flaps of foil are folded over the powder filling, and the package is hydraulically com-pressed in a die set to form a textured-powder (TP) bar. XRD analysis of the interior powder in a compressed bar shows a texture of 80% after 200 MPa compression.
An updated implementation of the Local Wavenumber Model (LWN) is discussed, primarily differing from recent versions by placing a greater focus on capturing a wide variety of turbulent flows including compressible flows. New models are introduced for spectral backscatter effects, the effect of bulk compression on the spectra, and incorporating the multispecies variables tracked in BHR4. Methods for reducing the compurational expense of tracking spectra for turbulent quantites are also investigated. Like recent versions of BHR, we test LWN in a number of canonical flows using a single set of coefficients, but additional coefficient tuning is likely to be required to improve the agreement with some of these flows.
This report documents the review of the hydrologic and hydraulic modeling approaches used to estimate local intense precipitation (LIP) flooding and their implementation in readily available simulation software packages. The review focused on a few representative simulation software packages because of the similarity of their underlying mathematical bases and the rainfall-runoff and hydraulic processes included. Their availability for use in estimating LIP flood hazards and for U.S. Nuclear Regulatory Commission staff review of these estimates at the nuclear power plant (NPP) site scale were also considered.
Plasma formation from intensely ohmically heated conductors is known to be highly non-uniform, as local overheating can be driven by micron-scale imperfections. Detailed understanding of plasma formation is required to predict the performance of magnetically driven physics targets and magnetically-insulated transmission lines (MITLs). Previous LDRD-supported work (projects 178661 and 200269) developed the electrothermal instability (ETI) platform, on the Mykonos facility, to gather high-resolution images of the self-emission from the non-uniform ohmic heating of z-pinch rods. Experiments studying highly inhomogeneous alloyed aluminum captured complex heating topography. To enable detailed comparison with magnetohydrodynamic (MHD) simulation, 99.999% pure aluminum rods in a z-pinch configuration were diamond-turned to ~10nm surface roughness and then further machined to include well-characterized micron-scale "engineered" defects (ED) on the rod's surface (T.J. Awe, et al., Phys. Plasmas 28, 072104 (2021)). In this project, the engineered defect hardware and diagnostic platform were used to study ETI evolution and non-uniform plasma formation from stainless steel targets. The experimental objective was to clearly determine what, if any, role manufacturing, preparation, or alloy differences have in encouraging nonuniform heating and plasma formation from high-current density stainless steel. Data may identify improvements that may be implemented in the fabrication/preparation of electrodes used on the Z machine. Preliminary data shows that difference in manufacturer has no observed effect on ETI evolution, stainless alloy 304L heated more uniformly than alloy 310 at similar current densities, and that stainless steel undergoes the same evolutionary ETI stages as ultra-pure aluminum, with increased emission tied to areas of elevated surface roughness.
The central goal of this proposal was to directly visualize and quantify how electronic correlations, vibronic couplings, and local solute-solvent interactions control intramolecular electron motion on the femtosecond time scale. The proposed research program focused on solvated Ruthenium (Ru) based mixed-valence complexes, a prototypical class of transition-metal complexes, which are of significant interest for their potential applications in photochemical energy conversion. Electron movements following photochemical excitation are closely coupled with atomic/vibrational and solvent motion. To disentangle these various components requires tools designed to directly probe electron correlations and vibronic coupling (coherently coupled motions of electronic and vibrational coordinates) on the timescale of electron motion in the solution phase.
The objective is to evaluate the efficiency and efficacy of local time-stepping (LTS) methods in the Model for Prediction Across Scales-Ocean (MPAS-Ocean).
The primary objective of this project is to develop a cost-effective, fit-for-purpose environmental monitoring system, “NoiseSpotter®,” that characterizes, classifies, and provides accurate location information for anthropogenic and natural sounds in near real-time. NoiseSpotter was developed to support the evaluation of potential acoustic effects of marine energy (ME) projects. By utilizing a compact array of three acoustic particle motion sensors, NoiseSpotter triangulates individual bearings to provide sound source localization to within 5% accuracy, allowing the ability to discern ME device sounds relative to other confounding sounds in the environment, while providing location estimates to nearby marine mammals for environmental mitigation purposes. The ME industry needs proven solutions to meet environmental impact assessment needs. The NoiseSpotter® includes off-the-shelf, modular components that are easy to assemble and disassemble. Its acoustic particle motion sensors are commercially available and the data logger and real-time telemetry system is designed to be plug-and-play. The entire system is relatively compact and can be deployed from small vessels. NoiseSpotter’s near real-time capability enables operational monitoring of ME sounds, particularly during early stages of technology adoption to facilitate mitigation of potential noise effects. Widespread adoption of the technology for acoustic monitoring of ME devices requires that it be cost effective; hence the anticipated commercial cost of system hardware is $35,000. This project contributes to reducing barriers to ME testing through support of scientific research focused on reducing or mitigating environmental risks and lowering costs and complexity of environmental monitoring. This project has developed an acoustic monitoring system, NoiseSpotter® (U.S. Patent No. 11,156,734 and U.S. Registered Trademark No. 6,442,313), to detect and characterize baseline noise and sounds from ME operations and support geolocation of detected sounds. The intended outcome of the project is to mitigate concerns about the potential for ME device noise to alter marine mammal or fish behavior. NoiseSpotter® enables cost-effective, near real-time acoustic monitoring of an operational ME device relative to ambient environmental noise and provides a technical basis for ME developers seeking to navigate the permitting process in an efficient manner.
In this webinar hosted by the U.S. Department of Energy's WINDExchange initiative, an expert panel discusses the myriad ways that offshore wind may impact communities. Impacted communities can take a variety of forms, from coastal communities hosting ports and cable landings to ocean users such as commercial fishermen, and can experience a range of environmental, economic, cultural, and other impacts related to offshore wind energy. This webinar explores these topics from diverse perspectives and provides an introduction to the local footprints of this emerging industry.
This project will optimize localized high concentration electrolyte (LHCE) for Li/LCO and Si/LCO batteries for consumer electronics applications, including select the best solvent and diluent, optimize the ratios of the solvents and the salt concentration. Results will be demonstrated not only in both coin cells, but also in pouch cells, which is required for large-scale commercial applications. This work can provide better understanding that would also benefit other LMB projects, including Li/NMC and Li/S batteries for electric vehicle applications. In the history of rechargeable batteries, all batteries have been first used in small scale consumer electronics, then eventually penetrate to large scale applications such as electrical vehicle or grid. We believe this development route will also be true for LMBs. By developing the best electrolyte for Li/LCO and Si/LCO chemistry, we will not only get the early market entry in consumer electronics, but we can also accumulate experience on the practical application of LMBs which can be used to further develop other types of LMBs for EV and other large-scale applications pursued by DOE.
Remarkable progress has been achieved in CdTe photovoltaics (PVs) to further improve cell performance while reducing manufacturing costs. Researchers optimized the front contact that leads the short-circuit current density (J sc ) over 31mA/cm 2 (e.g., (Zn, Mg)O buffer layer and/or alloying CdTe with Se). Reese et al. reported an open-circuit voltage (V oc ) over 1 V with group-V doped single crystal, showing the feasibility of increasing V oc in CdTe PV that is fixed to less than 900 mV in most cases. Recent studies suggested that the V oc improvement in polycrystalline CdTe PVs requires well-passivated back contact. One possible strategy is to use CdMgTe alloy (E g > 1.8 eV), where the band-gap offset (ΔE CB ≈ 0.2 eV) reflects minority carrier electrons, thereby decreasing surface recombination. Another strategy is to utilize a stable Al 2 O 3 layer as an electron reflector; experimental works confirmed the improved performance with a conformal Al 2 O 3 layer. In this configuration, the precise control of Al 2 O 3 (≈1 nm) over the entire CdTe layer is essential because the J sc greatly depends on the tunneling current. While promising, both CdMgTe and Al 2 O 3 passivation on CdTe introduce unfavorable valence band offset that blocks the hole transport. Kephart et al. proposed a patterned passixc vation layer (≈ 20 nm Al 2 O 3 ) with point contacts (≈ 3 μm in diameter) that extract hole carriers. This configuration is similar to the passive emitter and rear contact (PERC) design that has been extensively studied in Si PVs. While remarkably high carrier lifetime and photoluminescence (> 10 X) were measured, consistent improvement in V oc and efficiency in this CdTe PERC were not yet observed. At this time, it is unclear how the surface potential is distributed in the presence of patterned Al 2 O 3 reflectors and how this additional field impacts the PV performance for Cu-doped and group-V doped CdTe PERC devices. To tackle this challenge, we develop robust nanofabrication and characterization platform to study CdTe PERC devices consisting of a patterned Al 2 O 3 layer on CdSe( 1-x )Te x (Cu-doped, GrV-doped; x = 0 to 1; CST). First Solar supplies high-quality CST materials. The dark and light I-Vs under 1-sun illumination are extracted for a series of each set of devices. We perform quantitative and qualitative PV analysis for a series of Cu-doped and Gr-V doped PERC devices, showing notably different V oc changes for GrV-doped compared to Cu-doped PERC devices. This project attempts to produce individual contacts on single grains and grain boundaries to measure lateral transport. As a model system, we use a CdSe( 1-x )Te x film on glass prepared by a colossal grain growth (CGG) technique at National Renewable Research Laboratories (NREL). Our preliminary results confirm that intergranular transport is hindered by the electrical barrier formed near grain boundaries. The PERC fabrication and the lateral transport measurement platform developed in this project can easily be applied to other types of advanced CdSe( 1-x )Te x architectures to better understand local photocarrier transport, in turn, providing the fundamental knowledge to improve the performance of CdTe PVs.
Casting of aluminum alloys is a cost-effective way to mass manufacture bulk aluminum parts for automotive applications. However, the casting process requires filling of a mold, which imposes some limitations on the geometries that can be successfully cast and limits parts to be a uniform material. Therefore, we proposed that a hybrid casting plus additive manufacturing approach, Cast-and-Print, which could be used to locally modify the properties and geometry of cast parts to create difficult-to-cast, functional features. Here, we report the results of the properties of deposited materials on cast substrate, the properties of the interface of the deposited and cast material, and the application of the Cast-and-Print method to deposit rivet tabs on high-pressure die cast plates. Ultimately, the approach appears viable, but there are engineering challenges present to reliable additive processing of aluminum wires that need to be overcome for successful implementation of the technology.