Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIGNITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Diversity, abundance, and consistency of microbial oxygenase expression and biodegradation in a shallow contaminated aquifer

The diversity of Rieske dioxygenase genes and short-term temporal variability in the abundance of two selected dioxygenase gene sequences were examined in a naphthalene-rich, coal tar waste-contaminated subsurface study site. Using a previously published PCR-based approach (S. M. Ni Chadhain, R. S. Norman, K. V. Pesce, J. J. Kukor, and G. J. Zylstra, Appl. Environ. Microbiol. 72: 4078-4087, 2006) a broad suite of genes was detected, ranging from dioxygenase sequences associated with Rhodococcus and Sphingomonas to 32 previously uncharacterized Rieske gene sequence clone groups. The nag genes appeared frequently (20% of the total) in two groundwater monitoring wells characterized by low (similar to 10{sup 2} ppb; similar to 1 {mu} M) ambient concentrations of naphthalene. A quantitative competitive PCR assay was used to show that abundances of nag genes (and archetypal nah genes) fluctuated substantially over a 9-month period. To contrast short-term variation with long-term community stability, in situ community gene expression (dioxygenase mRNA) and biodegradation potential (community metabolism of naphthalene in microcosms) were compared to measurements from 6 years earlier. cDNA sequences amplified from total RNA extracts revealed that nah- and nag-type genes were expressed in situ, corresponding well with structural gene abundances. Despite evidence for short-term (9-month) shifts in dioxygenase gene copy number, agreement in field gene expression (dioxygenase mRNA) and biodegradation potential was observed in comparisons to equivalent assays performed 6 years earlier. Thus, stability in community biodegradation characteristics at the hemidecadal time frame has been documented for these subsurface microbial communities.

01 COAL, LIGNITE, AND PEAT↗

pH gradient-induced heterogeneity of Fe(III)-reducing microorganisms in coal mining-associated lake sediments

Lakes formed because of coal mining are characterized by low pH and high concentrations of Fe(II) and sulfate. The anoxic sediment is often separated into an upper acidic zone (pH 3; zone 1) with large amounts of reactive iron and a deeper slightly acidic zone (pH 5.5; zone III) with smaller amounts of iron. In this study, the impact of pH on the Fe(III)-reducing activities in both of these sediment zones was investigated, and molecular analyses that elucidated the sediment microbial diversity were performed. The results demonstrated that the upper acidic sediment was inhabited by acidophiles or moderate acidophiles which can also reduce Fe(III) under slightly acidic conditions. The majority of Fe(III) reducers inhabiting the slightly acidic sediment had only minor capacities to be active under acidic conditions.

01 COAL, LIGNITE, AND PEAT↗

Methane-producing microbial community in a coal bed of the Illinois Basin

A series of molecular and geochemical studies were performed to study microbial, coal bed methane formation in the eastern Illinois Basin. Results suggest that organic matter is biodegraded to simple molecules, such as H{sub 2} and CO{sub 2}, which fuel methanogenesis and the generation of large coal bed methane reserves. Small-subunit rRNA analysis of both the in situ microbial community and highly purified, methanogenic enrichments indicated that Methanocorpusculum is the dominant genus. Additionally, we characterized this methanogenic microorganism using scanning electron microscopy and distribution of intact polar cell membrane lipids. Phylogenetic studies of coal water samples helped us develop a model of methanogenic biodegradation of macromolecular coal and coal-derived oil by a complex microbial community. Based on enrichments, phylogenetic analyses, and calculated free energies at in situ subsurface conditions for relevant metabolisms (H{sub 2}-utilizing methanogenesis, acetoclastic methanogenesis, and homoacetogenesis), H{sub 2}-utilizing methanogenesis appears to be the dominant terminal process of biodegradation of coal organic matter at this location.

01 COAL, LIGNITE, AND PEAT↗

Climate control on Quaternary coal fires and landscape evolution, Powder River basin, Wyoming and Montana

Late Cenozoic stream incision and basin excavation have strongly influenced the modern Rocky Mountain landscape, but constraints on the timing and rates of erosion are limited. The geology of the Powder River basin provides an unusually good opportunity to address spatial and temporal patterns of stream incision. Numerous coal seams in the Paleocene Fort Union and Eocene Wasatch Formations within the basin have burned during late Cenozoic incision, as coal was exposed to dry and oxygen-rich near-surface conditions. The topography of this region is dominated by hills capped with clinker, sedimentary rocks metamorphosed by burning of underlying coal beds. We use (U-Th)/He ages of clinker to determine times of relatively rapid erosion, with the assumption that coal must be near Earth's surface to burn. Ages of 55 in situ samples range from 0.007 to 1.1 Ma. Clinker preferentially formed during times in which eccentricity of the Earth's orbit was high, times that typically but not always correlate with interglacial periods. Our data therefore suggest that rates of landscape evolution in this region are affected by climate fluctuations. Because the clinker ages correlate better with eccentricity time series than with an oxygen isotope record of global ice volume, we hypothesize that variations in solar insolation modulated by eccentricity have a larger impact on rates of landscape evolution in this region than do glacial-interglacial cycles.

01 COAL, LIGNITE, AND PEAT↗

Mechanism of instantaneous coal outbursts

Thousands of mine workers die every year from mining accidents, and instantaneous coal outbursts in underground coal mines are one of the major killers. Various models for these outbursts have been proposed, but the precise mechanism is still unknown. We hypothesize that the mechanism of coal outbursts is similar to magma fragmentation during explosive volcanic eruptions; i.e., it is caused by high gas pressure inside coal but low ambient pressure on it, breaking coal into pieces and releasing the high-pressure gas in a shock wave. Hence, coal outbursts may be regarded as another type of gas-driven eruption, in addition to explosive volcanic, lake, and possible ocean eruptions. We verify the hypothesis by experiments using a shock-tube apparatus. Knowing the mechanism of coal outbursts is the first step in developing prediction and mitigation measures. The new concept of gas-driven solid eruption is also important to a better understanding of salt-gas outbursts, rock-gas outbursts, and mud volcano eruptions.

01 COAL, LIGNITE, AND PEAT↗

Optimization of the process of plasma ignition of coal

Results are given of experimental and theoretical investigations of plasma ignition of coal as a result of its thermochemical preparation in application to the processes of firing up a boiler and stabilizing the flame combustion. The experimental test bed with a commercial-scale burner is used for determining the conditions of plasma ignition of low-reactivity high-ash anthracite depending on the concentration of coal in the air mixture and velocity of the latter. The calculations produce an equation (important from the standpoint of practical applications) for determining the energy expenditure for plasma ignition of coal depending on the basic process parameters. The tests reveal the difficulties arising in firing up a boiler with direct delivery of pulverized coal from the mill to furnace. A scheme is suggested, which enables one to reduce the energy expenditure for ignition of coal and improve the reliability of the process of firing up such a boiler. Results are given of calculation of plasma thermochemical preparation of coal under conditions of lower concentration of oxygen in the air mixture.

01 COAL, LIGNITE, AND PEAT↗

Conductive composites based on exfoliated graphite

Conductive composites of exfoliated graphite (EG) and coal-tar pitch have been prepared by mixing the components. The electrical properties of the composites have been studied, and the results have been interpreted in terms of the percolation theory. The threshold EG content for electrical conduction is determined to be similar or equal to 1.5 wt %, independent of the properties of the pitch and EG.

01 COAL, LIGNITE, AND PEAT↗

The use of muffle furnaces with microwave heating in the analysis of natural and technological objects

The analytical possibilities are considered of using a new type of equipment - microwave muffle furnaces - when performing the operations of incineration and roasting. A two- to threefold decrease in a warm-up time for a furnace with the use of microwave heating, a 3- to 16-fold decrease in the total duration of the analysis, and a twofold improvement in reproducibility of s{sub r} results are shown as exemplified by the processing of coal samples and technological products.

01 COAL, LIGNITE, AND PEAT↗

Effect of the chemical heat treatment in a semianthracite char on the textural properties and the gasification in air

The effects of the chemical heat treatments of a semianthracite char (AC) on the textural properties and the gasification in air are investigated. Sample AC first was treated with the LiCl/KCl mixture or the mixture formed by LiCl/IKCl and a metallic oxide, M{sub n=1,2}O (MgO, CaO, FeO, CoO, NiO, Cu{sub 2}O or ZnO) at 743, 873 or 1173 K and products obtained they were then washed carefully with water distilled. The information on the textural modifications was deduced of isotherms of CO{sub 2} adsorption to 273 K. The reactivity tests were taken to the temperature 808, 823 and 838 K. As resulting from the AC treatments, on developed the microporosity and on increase the air reactivity, in particular, the first effect is greater when the used mixture went LiCl/KCl/CoO at 1173 K and the second effect are greater when the used mixture went LiCl/KCl/Cu{sub 2}O at 1173 K.

01 COAL, LIGNITE, AND PEAT↗

Experimental investment of a pulse combustion steam generator and assessment of its environmental characteristics

The design of a steam generator constructed on the basis of a pulse combustion apparatus equipped with a swirl combustion chamber and an aerodynamic vale is described, and results of its experimenta; investment are presented. The quantity of nitrogen oxide emissions is estimated. A schematic arrangement for practical application of such an apparatus is proposed.

01 COAL, LIGNITE, AND PEAT↗

Problems of phytostratigraphy and the correlation of the Lower Jurassic continental sediments in West Siberia and Kuznetsk and Kansk-Achinsk basins

Paleofloral and palynological records of Lower Jurassic sediments in West Siberia, Kuznetsk (Kuzbass), and Kansk-Achinsk basins and their correlation are discussed. In a number of recent papers dedicated to the Jurassic stratigraphy of Siberia this problem is ambiguously treated. The reference palynological scale has been developed for the Jurassic West Siberian sediments and an uninterrupted succession of floral assemblages associated with it and with regional stratigraphic units has been recognized. On this basis the scheme of the correlation between the Lower Jurassic sediments of the Kansk-Achinsk and Kuznetsk basins and West Siberia permitting a better age estimate of coal-bearing deposits, is proposed.

01 COAL, LIGNITE, AND PEAT↗

Surface-active properties of humic and sulfochlorohumic acids

The surface tension of alkaline solutions of humic acids and their sulfochloroderivatives, which are synthesized by sulfonation of chlorohumic acids isolated from coal chlorinated by the electrochemical method, is investigated. It is established that humic compounds possess weak surface activity. Basic adsorption parameters are calculated.

01 COAL, LIGNITE, AND PEAT↗

Methods and Models for Analyzing Methane Sorption Capacity of Coal Based on Its Physicochemical Characteristics

The authors study the influence of physicochemical parameters on methane adsorption capacity of coal and offer the analytical method for the methane adsorption capacity for three-phased condition of methane. It is found that in the depth interval to 300 m below surface, methane adsorption capacity measured in lab can exceed natural gas content of coal obtained from geological exploration data by 30%, and the change in the thermodynamic condition of coal–methane system brings irreversible physicochemical consequences in terms of the altered ratios of physical states of the main components. There is no linear connection between natural gas content of a coal bed and its methane adsorption capacity with respect to occurrence depth. The application of Big Data in treatment and interpretation of large data flows is described. The theoretical data predicted using the proposed method and the experimental data on methane content of Kuzbass coal agree.

01 COAL, LIGNITE, AND PEAT↗

Technology and Ecology of Dumping at Open Pit Mines in Kuzbass

The methods and means of overburden dumping at open pit coal mines in Kuzbass are reviewed. Specific features of dumping are highlighted, and the dependence of dump stability on geological conditions and physical properties of overburden is determined. The priority lines of development in the dumping technology are aimed at efficient utilization of mined-out areas in open pits and idle hydraulic fills. The issues of the environmental safety of dumping are addressed.

01 COAL, LIGNITE, AND PEAT↗

Assessment of Horizontal External Stresses in the Vorkuta Mine Field Using Seismic Tomography Data

3D geomechanical model of the Vorkuta Mine, Pechora Coal Basin, has been developed and implemented numerically. By the data on dynamic events recorded by stationary seismic stations, tomography of the study object is performed, and velocity of elastic waves is recovered in the illuminated area of the object. The boundary value inverse problem on horizontal external stresses by stress distribution found using empirical relations between elastic wave velocities and stresses determined in the laboratoryscale experiments is formulated and solved.

01 COAL, LIGNITE, AND PEAT↗