Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Characterization of thick film poly(triarylamine) semiconductor diodes for direct x-ray detection

Thick film (>=5 mum thick) semiconducting polymer diodes incorporating poly(triarylamine) (PTAA) have been produced and applied as direct x-ray detectors. Experiments determined that a rectifying diode behavior persists when increasing the thickness of the active layer above typical thin film thicknesses (<1 mum), and the electrical conduction mechanism of the diodes has been identified. Direct current and photoconductivity measurements on indium tin oxide/poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate)/PTAA/metal diodes confirm that carrier conduction occurs via a Poole-Frenkel mechanism. The energy band structure of diodes (having gold or aluminum top electrodes) has been elucidated and used to explain the resulting electrical characteristics. Theoretical calculations show that, upon irradiation with x-rays, the diode quantum efficiency increases with increasing polymer film thickness. The diodes produced here display characteristics similar to their thin film analogs, meaning that they may be operated in a similar way and therefore may be useful for radiation dosimetry applications. Upon irradiation, the diodes produce an x-ray photocurrent that is proportional to the dose, thus demonstrating their suitability for direct x-ray detectors. The x-ray photocurrent remains the same in a device after a cumulative exposure of 600 Gy and after aging for 6 months.

07 ISOTOPE AND RADIATION SOURCES↗

Double side electroluminescence from p-NiO/n-ZnO nanowire heterojunctions

Double side light emission devices based on p-NiO/n-ZnO nanowire heterojunctions have been fabricated on indium tin oxide substrate by radio frequency magnetron sputtering combined with hydrothermal process. According to the energy band alignment, the detected broad visible and narrow ultraviolet electroluminescence arise from defect and band edge transitions in ZnO nanowires, respectively. The unique property of the double side emission is due to the nature of the large band gap of NiO film. It provides a good opportunity for the emission of a light emitting device with different colors on the top and back sides, simultaneously.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High mobility amorphous zinc oxynitride semiconductor material for thin film transistors

Zinc oxynitride semiconductor material is produced through a reactive sputtering process in which competition between reactions responsible for the growth of hexagonal zinc oxide (ZnO) and for the growth of cubic zinc nitride (Zn{sub 3}N{sub 2}) is promoted. In contrast to processes in which the reaction for either the oxide or the nitride is dominant, the multireaction process yields a substantially amorphous or a highly disordered nanocrystalline film with higher Hall mobility, 47 cm{sup 2} V{sup -1} s{sup -1} for the as-deposited film produced at 50 deg. C and 110 cm{sup 2} V{sup -1} s{sup -1} after annealing at 400 deg. C. In addition, it has been observed that the Hall mobility of the material increases as the carrier concentration decreases in a carrier concentration range where a multicomponent metal oxide semiconductor, indium-gallium-zinc oxide, follows the opposite trend. This indicates that the carrier transports in the single-metal compound and the multimetal compound are probably dominated by different mechanisms. Film stability and thin film transistor performance of the material have also been tested, and results are presented herein.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Spectrally narrowed edge emission from leaky waveguide modes in organic light-emitting diodes

A dramatic spectral line narrowing of the edge emission at room temperature from tris(quinolinolate) Al (Alq{sub 3}), N,N{prime}-diphenyl-N,N{prime}-bis(1-naphthylphenyl)-1,1{prime}-biphenyl-4,4{prime}-diamine (NPD), 4,4{prime}-bis(2,2{prime}-diphenyl-vinyl)-,1{prime}-biphenyl (DPVBi), and some guest-host small molecular organic light-emitting diodes (OLEDs), fabricated on indium tin oxide (ITO)-coated glass, is described. In all but the DPVBi OLEDs, the narrowed emission band emerges above a threshold thickness of the emitting layer, and narrows down to a full width at half maximum of only 5-10 nm. The results demonstrate that this narrowed emission is due to irregular waveguide modes that leak from the ITO to the glass substrate at a grazing angle. While measurements of variable stripe length l devices exhibit an apparent weak optical gain 0 {le} g {le} 1.86 cm{sup -1}, there is no observable threshold current or bias associated with this spectral narrowing. In addition, in the phosphorescent guest-host OLEDs, there is no decrease in the emission decay time of the narrowed edge emission relative to the broad surface emission. It is suspected that the apparent weak optical gain is due to misalignment of the axis of the waveguided mode and the axis of the collection lens of the probe.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of C{sub 60} morphology on high-order harmonic generation enhancement in fullerene-containing plasma

The morphologies of the fullerene targets and the ablated fullerenes to determine the optimal conditions of excitation of the C{sub 60}-containing targets have been analyzed. The optimization of fullerene-containing plasma conditions allowed the enhanced harmonic generation in these plasmas using laser radiation of different wavelengths, pulse durations, and phase modulation. A comparison between the harmonic generation in single-atom/ion-containing plasmas (using bulk carbon, silver, and indium targets) and fullerene-rich plasma plumes showed better conversion efficiency for the latter medium. The influence of phase modulation of the fundamental radiation in fullerene plasmas on the spectral properties of harmonics has been studied.

36 MATERIALS SCIENCE↗

Transparent photostable ZnO nonvolatile memory transistor with ferroelectric polymer and sputter-deposited oxide gate

We report on the fabrication of transparent top-gate ZnO nonvolatile memory thin-film transistors (NVM-TFTs) with 200 nm thick poly(vinylidene fluoride/trifluoroethylene) ferroelectric layer; semitransparent 10 nm thin AgO{sub x} and transparent 130 nm thick indium-zinc oxide (IZO) were deposited on the ferroelectric polymer as gate electrode by rf sputtering. Our semitransparent NVM-TFT with AgO{sub x} gate operates under low voltage write-erase (WR-ER) pulse of {+-}20 V, but shows some degradation in retention property. In contrast, our transparent IZO-gated device displays very good retention properties but requires anomalously higher pulse of {+-}70 V for WR and ER states. Both devices stably operated under visible illuminations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of ultraviolet and x-ray radiation on the work function of TiO{sub 2} surfaces

The work functions of nanocrystalline anatase (TiO{sub 2}) thin films and a rutile single crystal were measured using photoemission spectroscopy (PES). The nanocrystalline titanium dioxide films were deposited in-vacuum using electrospray thin film deposition. A comparison between ultraviolet photoemission spectroscopy (UPS) and low intensity x-ray photoemission spectroscopy (LIXPS) work function measurements on these samples revealed a strong, immediate, and permanent work function reduction (>0.5 eV) caused by the UPS measurements. Furthermore, it was found that regular XPS measurements also reduce the work function after exposure times ranging from seconds to minutes. These effects are similar in magnitude to artifacts seen previously on indium tin oxide (ITO) substrates characterized with XPS and UPS, and are likely related to the formation of a surface dipole through the photochemical hydroxylation of oxygen vacancies present on the TiO{sub 2} surface.

36 MATERIALS SCIENCE↗

Simulation of the Optical Parameters and Study of the Physical Properties of the ITO Films Prepared by the IBAD

Indium tin oxide (ITO) thin films have been deposited onto glass substrates at room temperature by ion beam assisted deposition technique at different deposition rates. During all the deposition processes, the parameters of the Kaufman ion source and the oxygen gas flow are maintained constants. And only the deposition rate is varied from 0,1 nm/s to 0,3 nm/s by adjusting the e-beam power supply. The effects of the deposition rate on the properties of the deposited films have been studied. The structural, optical and electrical properties of the deposited films have been characterized by X-ray diffraction, AFM, transmittance, FTIR, and Hall effect measurements. The optical constants of the deposited films have been calculated by fitting the transmittance spectra. It has been found that although the film prepared at low deposition rate (0,1 nm/s) shows a high transmittance in the visible region, it has a poor electrical conductivity. The films prepared at 0,2 nm/s deposition rate shows a good electrical conductivity, high IR reflectance which is useable for some electromagnetic wave shielding applications and a reasonable transmittance in the visible region.

36 MATERIALS SCIENCE↗

The Dependence of the Oxidation Enhancement of InP(100) Surface on the Coverage of the Adsorbed Cs

We report the oxidation of the InP(100) surface promoted by adsorbed Cs by synchrotron radiation photoemission. Oxygen exposure causes reduction of the charge transferred to the InP substrate from Cs and the growth of indium oxide and phosphorous oxide. The oxide growth displays a clear dependence on the Cs coverage. The oxidation of phosphorous is negligible up to 1000 L of O{sub 2} exposure when the Cs coverage is less than half a monolayer (ML), but the formation of the second half monolayer of Cs greatly accelerates the oxidation. This different enhancement of the InP oxidation by the first and the second half monolayer of Cs is due to the double layer structure of the adsorbed Cs atoms, and consequently the higher 6s electron density in the Cs atoms when Cs coverage is larger than 0.5 ML.

43 PARTICLE ACCELERATORS↗

The Study of Energy Band Gap of Al{sub x}In{sub y}Ga{sub 1-x-y}N Quaternary Alloys Using UV-VIS Spectroscopy

Optical characterizations have been performed on high-quality quaternary Al{sub x}In{sub y}Ga{sub 1-x-y}N thin films using UV-VIS spectroscopy at room temperature. The Al{sub x}In{sub y}Ga{sub 1-x-y}N films were grown on c-plane (0001) sapphire substrates with AlN as buffer layers using molecular beam epitaxy (MBE) technique with aluminum (Al) mole fraction x ranging from 0.0 to 0.2 and constant indium (In) mole fraction y = 0.1. The UV-VIS measurements indicated that the energy band gap of the quaternary films increases with increasing Al composition from 0.05 to 0.2. This trend is expected since the incorporation of Al increases the energy band gap of ternary In0.1Ga0.90N (3.004eV). We have also investigated the bowing parameter of the variation of energy band gaps and found it to be very sensitive on Al content. A value of b=7 eV has been obtained for our quaternary Al{sub x}In{sub y}Ga{sub 1-x-y}N alloys.

36 MATERIALS SCIENCE↗

Influence of Ag thickness on structural, optical, and electrical properties of ZnS/Ag/ZnS multilayers prepared by ion beam assisted deposition

The structural, optical, and electrical characteristics of zinc sulfide (ZnS)/Ag/ZnS (ZAZ) multilayer films prepared by ion beam assisted deposition on k9 glass have been investigated as a function of Ag layer thickness. The characteristics of ZAZ multilayer are significantly improved up insertion of optimal Ag thickness between ZnS layers. The results show that due to bombardment of Ar ion beam, distinct Ag islands evolve into continuous Ag films at a thin Ag thickness of about 4 nm. The thinner Ag film as a thickness of 2 nm leads to high sheet resistance and low transmittance for the interface scattering induced by the Ag islands or noncontinuous films; and when the Ag thickness is over 4 nm, the ZAZ multilayer exhibits a remarkably reduced sheet resistance between 7-80 {Omega}/sq for the increase in carrier concentration and mobility of Ag layer, and a high transmittance over 90% for the interference phenomena of multilayers and low absorption and surface scattering of Ag layer. The ZAZ multilayer with 14 nm Ag film has a figure of merit up to 6.32x10{sup -2} {Omega}{sup -1}, an average transmittance over 92% and a sheet resistance of 7.1 {Omega}/sq. The results suggest that ZAZ film has better optoelectrical properties than conditional indium tin oxide single layer.

36 MATERIALS SCIENCE↗

Polaron transport in TiO{sub 2} thin films

Undoped and Fe-doped TiO{sub 2} thin films were obtained by rf-sputtering technique onto heated glass substrates (250 deg. C) covered with indium tin oxide. The temperature dependence of the electrical conductivity was investigated in the temperature range 13-320 K, and it shows that the conduction mechanism in the studied samples is described by small-polaron hopping (SPH) at temperatures higher than half of the Debye temperature ({theta}{sub D}). It was found that the magnitude of the SPH coupling increases by Fe doping in TiO{sub 2} thin films. With decreasing temperature, the conduction behavior transited from SPH conduction to variable-range hopping (VRH) conduction. In the intermediate temperature domain (200 K<T<{theta}{sub D}/2), the VRH conduction was found to be dominant, while a temperature-independent conductivity behavior was observed in the lower temperature range (T<200 K).

36 MATERIALS SCIENCE↗

Laser Nanostructurization of the Metal and Alloy Surfaces

The results from experimental and theoretical investigation of material pulsed laser treatment aimed at obtaining nano- and microstructured surface are presented. An experiment has been performed on the modification of indium surface using a solid-state diode-pumped laser. It has been shown that nano- and micro-size structures are formed under laser melting and fast crystallization of the metal surface. The kinetics of the crystallization of metals under superfast cooling. The distribution function for crystalline nuclei dimensions is analytically found within the framework of the classical kinetic equation in case of superfast temperature changing. The average number of particles in the crystalline nuclei and relative volume of the crystalline phase are determined as functions of thermodynamic and laser treatment regime parameters. Good agreement is observed with experimental results for ultrashort laser pulses induced micro- and nanostructures production.

36 MATERIALS SCIENCE↗

The Dependence of Donor:Acceptor Ratio on the Photovoltaic Performances of Blended poly (3-octylthiophene-2,5-diyl) and (6,6)-phenyl C{sub 71} butyric acid methyl ester Bulk Heterojunction Organic Solar Cells

Bulk heterojunction organic solar cells using blended poly (3-octylthiophene-2,5-diyl)(P3OT) and (6,6)-phenyl C{sub 71} butyric acid methyl ester (PC{sub 71}BM) have been fabricated. P3OT and PC{sub 71}BM were used as the electron donor (D) and acceptor (A), respectively. Both materials were mixed and dissolved in dichlorobenzene with three different D:A ratios i.e. 1:3, 1:1 and 3:1 (weight) while maintained at the concentration of 2 wt%(26 mg/ml). The blended thin films were sandwiched between the indium tin oxide (ITO) coated glass and the aluminum film. This paper reports the influence of donor:acceptor ratio on the performance of solar cell devices measured by current-voltage measurement both in the dark and under 1.5 AM solar illumination. It was found that all devices showed the photovoltaic effect with poor diode behavior and the donor:acceptor ratio significantly influenced on the performance of bulk heterojunction organic solar cells.

36 MATERIALS SCIENCE↗

Laser induced extraplanar propulsion for three-dimensional microfabrication

The laser induced extraplanar propulsion process is presented for the creation of controllable three-dimensional deformation of on-substrate components. It is demonstrated that the process is compatible with transparent substrates and ductile materials and is highly controllable in terms of the desired deformation via the adjustment of incident laser energy density. Copper films with thicknesses varying from 0.1-1 {mu}m are deformed over bending angles ranging from 0 deg. - 180 deg. A 355 nm laser at fluences ranging from 10-40 mJ/cm{sup 2} is used in conjunction with an indium-tin-oxide propulsion layer to demonstrate the process. Characterization is performed via electron and laser confocal microscopy.

36 MATERIALS SCIENCE↗

Improved luminescence and thermal stability of semipolar (11-22) InGaN quantum dots

Semipolar (11-22)-oriented InGaN/GaN quantum dots (QDs) emitting in the 380-620 nm spectral range were synthesized by plasma-assisted molecular-beam epitaxy. The influence of the growth temperature on the properties of InGaN QDs has been investigated by photoluminescence and transmission electron microscopy. Growth temperatures low enough to prevent indium desorption provide a favorable environment to semipolar plane (11-22) to enhance the internal quantum efficiency of InGaN/GaN nanostructures.

36 MATERIALS SCIENCE↗

Absolute calibration method for laser megajoule neutron yield measurement by activation diagnostics

The laser megajoule (LMJ) and the National Ignition Facility (NIF) plan to demonstrate thermonuclear ignition using inertial confinement fusion (ICF). The neutron yield is one of the most important parameters to characterize ICF experiment performance. For decades, the activation diagnostic was chosen as a reference at ICF facilities and is now planned to be the first nuclear diagnostic on LMJ, measuring both 2.45 MeV and 14.1 MeV neutron yields. Challenges for the activation diagnostic development are absolute calibration, accuracy, range requirement, and harsh environment. At this time, copper and zirconium material are identified for 14.1 MeV neutron yield measurement and indium material for 2.45 MeV neutrons. A series of calibrations were performed at Commissariat a l'Energie Atomique (CEA) on a Van de Graff facility to determine activation diagnostics efficiencies and to compare them with results from calculations. The CEA copper activation diagnostic was tested on the OMEGA facility during DT implosion. Experiments showed that CEA and Laboratory for Laser Energetics (LLE) diagnostics agree to better than 1% on the neutron yield measurement, with an independent calibration for each system. Also, experimental sensitivities are in good agreement with simulations and allow us to scale activation diagnostics for the LMJ measurement range.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dielectric Properties Of Pb(In{sub 1/2}Nb{sub 1/2})O{sub 3}-PbTiO{sub 3} Solid Solution Synthesized By Solid State Reaction Route

Phase pure (1-x)Pb(In{sub 1/2}Nb{sub 1/2})O{sub 3}-x PbTiO{sub 3} ceramics near morphotrophic phase boundary (x = 0.35) are prepared by conventional solid state reaction route, by adding 2 mol.% MgO. The dielectric properties of lead indium niobate-lead titanate ceramic are studied as a function of both temperature and frequency. For this composition the dielectric constant for 100 Hz increases from 1944 at room temperature to 1510 at Curie temperature(304 deg. C). The saturation polarization, measured at room temperature, is found to be 23.9 {mu}C/cm{sup 2} for 40 kV/cm.

36 MATERIALS SCIENCE↗