Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

AMS / BARC Joint Survey Addendum Technical Report

This report details the data analysis results from data collected during the September-October 2019 joint survey series between the Department of Energy (DOE) National Nuclear Security Administration (NNSA) Aerial Measuring System (AMS) asset, and the Government of India’s Department of Atomic Energy (DAE) Bhabha Atomic Research Centre (BARC). This joint survey series took place at the Nevada National Security Site (NNSS), areas of public land in Southern Nevada, and at the DOE Office of Legacy Management (LM) Large Area Calibration Pads (LACP) at the Grand Junction Regional Airport in Grand Junction, CO. The data detailed in this report were gathered at the LACP. More details regarding the setup of these surveys and personnel involvement can be found in the AMS / BARC Joint Survey Summary Report. The data from the LACP collected by AMS are consistent with past data collection campaigns at the LACP. The AMS Bell 412 (B412) helicopter, equipped with both the standard AMS thallium-doped sodium iodide (NaI(Tl)) 2"x4"x16" 12-detector system and a subset of the BARC Aerial Gamma Spectroscopy System (AGSS) consisting of two independent 3"x3"cylindrical NaI(Tl) detectors, measured each of the five calibration pads for a minimum of 10 minutes. After the helicopter measurements, a pressurized ion chamber (PIC) was used to directly measure radiation exposure rates on each of the pads for a period 5 minutes. The geophysical calibration procedure published by the International Atomic Energy Agency (IAEA) (Erdi-Krausz et al. 2003) was used to determine the spectral stripping sensitivity matrix for naturally occurring radiological material (NORM). The sensitivity matrix is consistent with the AMS long term average. Additionally, the PIC data was used to calibrate the AMS system for exposure rate. The results of the exposure rate analysis are also consistent with AMS long-term averages.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Emerging Issues in the Development of Geologic Models for Gas Hydrate Numerical Simulation

The numerical simulation of gas hydrate reservoirs has evolved greatly in recent years. Scientific and industrial drilling programs have acquired detailed characterization data from gas hydrate systems in Alaska, Japan, India, Korea, China, and the Gulf of Mexico. These data provide invaluable calibration points that serve to ground-truth hydrate reservoir modeling efforts.

Boswell, Ray↗

Qualification study of SiPMs on a large scale for the CMVD Experiment

A Cosmic Muon Veto (CMV) detector using extruded plastic scintillators is being designed around the mini-Iron Calorimeter (mini-ICAL) detector at the transit campus of the India based Neutrino Observatory, Madurai for the feasibility study of shallow depth underground experiments. The scintillation signals that are produced in the plastic due to muon trajectories are absorbed by wavelength shifting (WLS) fibres. The WLS fibres re-emit photons of longer wavelengths and propagate those to silicon photo-multipliers (SiPMs). The SiPMs detect these photons, producing electronic signals. The CMV detector will use more than 700 scintillators to cover the mini-ICAL detector and will require around 3000 SiPMs. The design goal for the cosmic muon veto efficiency of the CMV is >99.99%. Hence, every SiPM used in the detector needs to be tested and characterised to satisfy the design goal of CMV. A mass testing system was developed for the measurement of gain and choice of the overvoltage ($V_{ov}$) of each SiPMs using an LED driver. The $V_{ov}$ is obtained by studying the noise rate, the gain of the SiPM. This paper describes the experimental setup used to test the SiPMs characteristics along with detailed studies of those characteristics as a function of temperature.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Building the Next Generation Through 20 Years of Solar Decathlon: From Collegiate Prize to Multifaceted Clean Energy Workforce Program: Preprint

The U.S. Department of Energy Solar Decathlon, initiated in 2002 as a collegiate competition that challenges student teams to design and build high-performance, low-carbon buildings powered by renewables, has always been about developing students to be the next generation of buildings professionals. As we celebrate the 20th anniversary of the Solar Decathlon in 2022, this paper highlights its evolution from a singular prize to a multi-faceted platform preparing the broader buildings workforce to address the challenges of climate change. The original program challenged students to design and construct a residence. To improve the accessibility of the competition, the Design Challenge -- a 1-2 semester design-only competition-- was added to the Solar Decathlon platform. The Solar Decathlon has also scaled globally with events in Europe, the Middle East, China, Latin America and the Caribbean, Africa, and India. In 2021, the Solar Decathlon broadened its reach once again by introducing Solar Decathlon Pro, a zero-energy design practicum for professional architects and engineers. This paper utilizes participation data, surveys, alumni profiles, project submissions, and more to understand how changes to the program have expanded program reach to minority-serving institutions, environmental justice communities, and impacted the building industry's capacity to construct high performance and zero energy buildings. As one of the oldest federal government prizes, the Solar Decathlon offers a roadmap for dramatically increasing prize impact and demonstrates that it continues to push boundaries to tackle decarbonization and environmental justice.

build↗

Mass testing of SiPMs for the CMVD at IICHEP

A Cosmic Muon Veto Detector (CMVD) is being built around the mini-Iron Calorimeter (mini-ICAL) detector at the transit campus of the India based Neutrino Observatory, Madurai. The CMV detector will be made using extruded plastic scintillators with embedded wavelength shifting (WLS) fibres which propagate re-emitted photons of longer wavelengths to silicon photo-multipliers (SiPMs). The SiPMs detect these scintillation photons, producing electronic signals. The design goal for the cosmic muon veto efficiency of the CMV is $>$99.99% and fake veto rate less than 10$^{-5}$. A testing system was developed, using an LED driver, to measure the noise rate and gain of each SiPM, and thus determine its overvoltage ($V_{ov}$). This paper describes the test results and the analysed characteristics of about 3.5k SiPMs.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Deep Inelastic Lepton-Nucleus Scattering

I have worked at MINERvA for almost four years and I am involved in theanalysis of antineutrino interactions with the nuclear targets in the DIS region. Iam one of the first Ph.D. students to use higher statistics antineutrino data obtainedby the MINERvA detector. Before joining MINERvA, I have also workedat my home institution(Aligarh Muslim University, India) for almost three yearson the theoretical understanding of neutrino-nucleon and neutrino-nucleus scatteringcross sections. These studies were more confined to quasielastic scatteringprocesses. Therefore, my work is divided into two parts. First I will introduce thework which I am performing during my stay at the Fermilab and will be discussedin Chapters 2-6 and then I will introduce the theoretical work, which will bediscussed in Chapters 7-10. Finally I will conclude my findings in Chapter 11.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electroweak interactions in Nucleons and Nuclei

The neutrino oscillation experiments are being performed using detectors having moderate to heavy nuclear targets like $^{12}{C}$, $^{16}{O}$, $^{40}{Ar}$, $^{56}{Fe}$, $^{208}{Pb}$, etc. to get a reasonably good number of events. Many present-day neutrino experiments are taking data in the few GeV (1 $\leq$ E$_{\nu}$ $\leq$ 10 GeV) energy region of neutrinos and antineutrinos to which some of the neutrino oscillation parameters are sensitive and required to understand CP violation in the lepton sector. This is the energy region which is most intriguing as it receives the contribution from the Quasielastic Scattering~(QE), Inelastic Scattering(IE), Shallow Inelastic Scattering (SIS) and the Deep Inelastic Scattering~(DIS) processes. This thesis details three different studies: \begin{itemize} \item First, a DIS study was performed with the MINERvA experiment at the Fermilab. MINERvA is a dedicated neutrino and antineutrino cross-section measurement experiment and uses (anti)neutrino beams in the two energy runs {\it viz.} the low energy run~(the peak of which lies $\sim$ 3 GeV) and the medium energy run(the peak lies at $\sim$ 6 GeV). The MINERvA experiment is using several nuclear targets like $^{4}$He, $^{12}$C, $^{16}$O, $^{56}$Fe and $^{208}$Pb and the aim is to perform EMC~(European Muon Collaboration experiment using charged lepton beam on several nuclear targets) kind of measurements to understand the nuclear medium effects in both the neutrino and antineutrino modes in the wide region of Bjorken scaling variable $x$, and the four-momentum transfer squared $Q^2$, covering the quasielastic, inelastic, and the deep inelastic scattering regions. In the medium energy region, it is expected that more than 30\% of the events would arise due to DIS processes. \item Second part of the thesis includes the analysis of the proposed India-based Neutrino Observatory(INO) atmospheric neutrino experiment. This work is dedicated to studying atmospheric neutrino and ant ineutrino oscillation parameters in the INO experiment. We present the ICAL sensitivity to confirm a non-zero value of the difference in atmospheric mass squared of neutrinos and anti-neutrinos i.e. ($|\Delta m^{2}_{32}|$-$|\Delta\overline{m^{2}}_{32}|$). \item Third, the theoretical work that was performed at the Aligarh Muslim University. This work has been performed keeping in mind the theoretical development of a model that will describe the associated particle production induced by photons, electrons, neutrinos, and antineutrinos. We have studied the associated particle production induced by photons which receive the contributions from the non-resonant terms and from the nucleon, hyperon, and kaon resonances. \end{itemize}

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

European Union's Action Plan for Power Sector Decarbonisation

A collaborative report from the Clean Energy Ministerial (CEM) on Lessons Learned for Rapid Decarbonization of Power Sectors was delivered to energy ministers and presented at CEM13 in the United States in September 2022. In light of these lessons learned and discussed at CEM13, several countries signaled intent to develop Action Plans for power sector decarbonization that will be presented at CEM14 in India. These action plans complement - but are differentiated from - other international power sector initiatives such as the Breakthrough Agenda - whose broad purpose is to raise collective ambition - and the Global Power System Transformation (G-PST) Consortium - whose goals are to convene power system operators to accelerate research innovations and foster peer learning. These action plans, supported by the 21st Century Power Partnership (21CPP) and other CEM workstreams via direct technical assistance and capacity building, are instead intended to focus on implementation actions given each country's existing power sector goals and activities and are an opportunity for countries to display leadership in power sector decarbonization. These action plans are voluntary, developed by each country individually, and can be viewed as a living document that is subject to change.

decarbonization↗

Chile's Action Plan for Power Sector Decarbonization

A collaborative report from the Clean Energy Ministerial (CEM) on Lessons Learned for Rapid Decarbonization of Power Sectors was delivered to energy ministers and presented at CEM13 in the United States in September 2022. In light of these lessons learned and discussed at CEM13, several countries signaled intent to develop Action Plans for power sector decarbonization that will be presented at CEM14 in India. These action plans complement but are differentiated from - other international power sector initiatives such as the Breakthrough Agenda whose broad purpose is to raise collective ambition and the Global Power System Transformation (G-PST) Consortium whose goals are to convene power system operators to accelerate research innovations and foster peer learning. These action plans, supported by the 21st Century Power Partnership (21CPP) and other CEM workstreams via direct technical assistance and capacity building, are instead intended to focus on implementation actions given each country's existing power sector goals and activities and are an opportunity for countries to display leadership in power sector decarbonization. These action plans are voluntary, developed by each country individually, and can be viewed as a living document that is subject to change.

Chile↗

Australia's Action Plan for Power Sector Decarbonisation

A collaborative report from the Clean Energy Ministerial (CEM) on Lessons Learned for Rapid Decarbonization of Power Sectors was delivered to energy ministers and presented at CEM13 in the United States in September 2022. In light of these lessons learned and discussed at CEM13, several countries signaled intent to develop Action Plans for power sector decarbonization that will be presented at CEM14 in India. These action plans complement but are differentiated from other international power sector initiatives such as the Breakthrough Agenda whose broad purpose is to raise collective ambition and the Global Power System Transformation (G-PST) Consortium whose goals are to convene power system operators to accelerate research innovations and foster peer learning. These action plans, supported by the 21st Century Power Partnership (21CPP) and other CEM workstreams via direct technical assistance and capacity building, are instead intended to focus on implementation actions given each country's existing power sector goals and activities and are an opportunity for countries to display leadership in power sector decarbonization. These action plans are voluntary, developed by each country individually, and can be viewed as a living document that is subject to change.

Australia↗

United Kingdom's Action Plan for Power Sector Decarbonisation

A collaborative report from the Clean Energy Ministerial (CEM) on Lessons Learned for Rapid Decarbonization of Power Sectors was delivered to energy ministers and presented at CEM13 in the United States in September 2022. In light of these lessons learned and discussed at CEM13, several countries signaled intent to develop Action Plans for power sector decarbonization that will be presented at CEM14 in India. These action plans complement but are differentiated from other international power sector initiatives such as the Breakthrough Agenda whose broad purpose is to raise collective ambition and the Global Power System Transformation (G-PST) Consortium whose goals are to convene power system operators to accelerate research innovations and foster peer learning. These action plans, supported by the 21st Century Power Partnership (21CPP) and other CEM workstreams via direct technical assistance and capacity building, are instead intended to focus on implementation actions given each country's existing power sector goals and activities and are an opportunity for countries to display leadership in power sector decarbonization. These action plans are voluntary, developed by each country individually, and can be viewed as a living document that is subject to change.

decarbonization↗

RECS student sequestration program

The 2007 Research Experiment in Carbon Sequestration (RECS) met at the Montana State University (MSU) and a variety of field sites over the 10-day period of July 29 - Aug 10. This year's group consisted of 17 students from graduate and doctoral programs in the United States and Canada, as well as early career professionals in fields related to carbon mitigation. Appropriately, because greenhouse gas reduction and storage is a global problem, the group included seven international students, from France, Iran, Paraguay, Turkey, Russia and India. Classroom talks featured experts from academia, government, national laboratories, and the private sector, who discussed carbon capture and storage technologies and related policy issues. Then, students traveled to Colstrip, Montana to visit PPL Montana's coal-fired power plant and view the local geology along the Montana/Wyoming border. Finally, students spent several days in the hands-on work at ZERT, using carbon dioxide detection and monitoring equipment. 1 photo.

20 FOSSIL-FUELED POWER PLANTS↗

Plant maintenance and advanced reactors issue, 2008

The focus of the September-October issue is on plant maintenance and advanced reactors. Major articles/reports in this issue include: Technologies of national importance, by Tsutomu Ohkubo, Japan Atomic Energy Agency, Japan; Modeling and simulation advances brighten future nuclear power, by Hussein Khalil, Argonne National Laboratory, Energy and desalination projects, by Ratan Kumar Sinha, Bhabha Atomic Research Centre, India; A plant with simplified design, by John Higgins, GE Hitachi Nuclear Energy; A forward thinking design, by Ray Ganthner, AREVA; A passively safe design, by Ed Cummins, Westinghouse Electric Company; A market-ready design, by Ken Petrunik, Atomic Energy of Canada Limited, Canada; Generation IV Advanced Nuclear Energy Systems, by Jacques Bouchard, French Commissariat a l'Energie Atomique, France, and Ralph Bennett, Idaho National Laboratory; Innovative reactor designs, a report by IAEA, Vienna, Austria; Guidance for new vendors, by John Nakoski, U.S. Nuclear Regulatory Commission; Road map for future energy, by John Cleveland, International Atomic Energy Agency, Vienna, Austria; and, Vermont's largest source of electricity, by Tyler Lamberts, Entergy Nuclear Operations, Inc. The Industry Innovation article is titled Intelligent monitoring technology, by Chris Demars, Exelon Nuclear.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Blackout: coal, climate and the last energy crisis

Coal fuels more than 30 per cent of UK electricity production, and about 50 per cent in the US, providing a significant portion of total energy output. China and India's recent ferocious economic growth has been based almost entirely on coal-generated electricity. Coal currently looks like a solution to many of our fast-growing energy problems. However, while coal advocates are urging us full steam ahead, the increasing reliance on this dirtiest of all fossil fuels has crucial implications for energy policy, pollution levels, the global climate, world economy and geopolitics. Drawbacks to a coal-based energy strategy include: Scarcity - new studies suggest that the peak of world coal production may actually be less than two decades away; Cost - the quality of produced coal is declining, while the expense of transportation is rising, leading to spiralling costs and increasing shortages; and, Climate impacts - our ability to deal with the historic challenge of climate change may hinge on reducing coal consumption in future years.

01 COAL, LIGNITE, AND PEAT↗

Deployment of Cesium Recovered from High Level Liquid Waste for Irradiation - Indian Scenario - 13128

Recovery of Cs-137 from HLW and its utilisation as source pencil in place of Co-60 is vital for medical and sewage treatment applications in India. For separation of Cs, specific ion exchange resins as well as 'Calyx crown' solvent have been developed and synthesized indigenously. A flow sheet involving separation of Cs from acidic HLW using Ammonium Molybdo Phosphate (AMP) resins, recovery of Cs from the loaded AMP column by dissolving it in alkali, ion exchange purification of Cs rich alkaline solution using Resorcinol-Formaldehyde Poly condensate (RF) resins and its elution in cesium nitrate form was developed and demonstrated. Solvent extraction route employing 0.03 Molar, 1-3-octyl oxy Calyx (4) arene crown-6 in 30% isodecyl alcohol and dodecane was also established using mixer settlers. Cesium lithium borosilicate glass based formulations have been considered as a glass matrix for Cs irradiation pencils. While choosing this vitreous matrix, attributes addressing maximum possible Cs-137 loading, low glass pouring temperature to minimise Cs volatility, reasonably good mechanical strength and good chemical durability have been considered. Recovered cesium nitrate solution was vitrified along with glass additives in an induction heated metallic melter and subsequently poured into 12 numbers of Cs irradiation pencils positioned on turn-table equipped with the load cell. The complete cycle involving recovery of Cs from HLW followed by its conversion into Cs pencil was demonstrated. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Vacuum insulated room temperature bore horizontal cryostat for 4-Tesla superconducting magnet

4-Tesla warm bore superconducting magnet is being constructed at Bhabha Atomic Research Centre in India. The adiabatically cooled superconducting magnet will be used for corrosion and Magneto Hydro Dynamic (MHD) studies related to development of Lead Lithium Cooled Ceramic Breeder (LLCB) test blanket module (TBM). Magnet aperture is of 300 mm diameter and is accessible from both ends. Magnet is completely immersed in liquid helium bath at 4.2K. The stored magnetic energy during normal operation is 2.6 MJ. Huge amount of Lorentz forces acts on the magnet coils during operation. These forces try to axially compress the coils and cause outward radial movement of the conductor. Micro meter movement of the coils result in energy deposition due to large operating fields. This energy, albeit small, is still sufficient to cause quench in the magnet as the heat capacities at cryogenic temperatures are very low. Pre-stressing and banding of the superconducting strands help to overcome conductor movement by increasing structural rigidity. This paper describes the thermal, structural and magnetic design the superconducting solenoid magnet. (author)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of Synergistic Fuel Cycle Options with Thorium and Heavy Water Reactors

Fuel cycle options (FCOs) with thorium-based fuels have characteristics that may have benefits for meeting certain objectives, such as transuranic actinide inventory management and overall natural resource utilization. Neutron irradiation of thorium and uranium-233 results in negligible production of transuranic actinides. This advantage is compromised, to a degree, when thorium fuels are used in conjunction with uranium-238; however, strategic reprocessing and fuel use (e.g., recycle of plutonium and/or minor actinides) can be used to manage this problem. Furthermore, thorium FCOs with reprocessing can extend the availability of natural nuclear resources by breeding new fissile material, recovering and recycling unused material, and achieving high burnups. In instances where natural thorium is more readily available than uranium, FCOs which use thorium may be preferable from sustainability and energy security perspectives. However, many hybrid uranium-thorium FCOs struggle to perform well in this regard, since large amounts of external fissile material (and therefore natural uranium) are required to breed the required uranium-233. DOE's evaluation and screening effort reports that for every metric ton (MT) of U-233 bred in a light water reactor for reuse, about 1000 MT of natural uranium are required to support such breeding, much of which is used inefficiently due to enrichment. The combination of HWRs and thorium-based fuels has the potential to reduce this consumption of natural uranium resources. Because heavy water moderates neutrons without significant absorption, fissile material requirements are lower compared to those of LWRs. This has enabled conventional 'once-through' HWRs to operate with only slightly-enriched or even natural uranium. Also, HWRs can be combined with LWRs in multistage FCOs where used LWR fuel can be processed and the remaining fissile content is sufficient to support use as fuel in HWRs in spite of the presence of neutron poisons (e.g., uranium-236); this concept has been demonstrated at a research scale in Korea. Thus, additional energy is extracted from the same initial natural uranium feed and uranium enrichment effort. Another consideration with using thorium-based fuels in HWRs is the current limited operational experience of the reactors and associated fuel cycle facilities using these fuels. However, work continues internationally towards gaining further experience. For example, at equilibrium the third stage of India's planned Three-Stage Nuclear Power Program uses thorium/uranium-233 or thorium/plutonium fuels with a fissile supply from second-stage fast reactors. Further, China plans to experiment with low-enriched uranium (LEU)-Th CANFLEX fuel bundles in a once-through configuration in its HWRs and a long-term objective is to transition to thorium use in a closed HWR FCO. Vanderbilt University (VU) and Oak Ridge National Laboratory (ORNL) are characterizing multi-stage, thermal-reactor FCOs that incorporate thorium and examining their potential performance. This paper presents insights from the examination of FCOs which consider the synergy of HWRs and thorium. Two multi-stage FCOs which incorporate thorium-based fuels in HWRs have been examined for their potential, one which uses recycled PWR uranium oxide fuel in conjunction with thorium in an HWR, and another that uses recycled HWR fuel in an MSR which also includes thorium. Both of the systems studied offer resource utilization improvements as compared to a once-through LWR fueled with low-enrichment uranium and highlight the potential synergy of thorium and HWRs. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effects of He Ion Irradiation in Simple Borosilicate Glasses for HLW Immobilisation - 20324

High-level radioactive waste (HLW) consists of fission products and minor actinides. Borosilicate glass is the host material of choice in most countries to safely immobilize HLW, followed by eventual geological disposal. HLW glasses will experience both self-heating and self-irradiation effects due to the decay of fission products and minor actinides present therein. During the first 500 years of geological disposal, beta-gamma decay will be the main source of radiation due to short half-lives of fission products, as compared to very long-lived actinides which will be responsible for irradiation over much longer timescales. High-energy alpha particles and alpha recoil nuclei can potentially have significant impact (stored energy, volume change, accumulated dose, chemical durability) on the performance of the wasteform over longer timescales. Thus, to ensure safe and economic disposal over geological periods (10{sup 4} - 10{sup 6} years), the assessment of performance and properties in terms of radiation effects becomes indispensable. This work aims to simulate the effects of alpha decay in radioactive waste glasses. Two international glasses, namely UK 'MW' lithium-sodium borosilicate and Indian sodium-barium borosilicate, which are being used as HLW immobilization matrices by the UK and India respectively, were prepared by a melt-quench method and annealed below their glass transition temperatures. Both glasses were irradiated with 650 KeV He{sup 2+} ions with doses ranging from 10{sup 15} to 10{sup 17} ions/cm{sup 2}. Structural analysis was carried out using electron paramagnetic resonance (EPR) and Raman spectroscopies. First derivative continuous wave EPR spectra were recorded for all pristine and irradiated glass monoliths at room temperature using an X-band (frequency 9.6 GHz) EPR Bruker spectrometer. Results from EPR analyses showed the formation of irradiation induced paramagnetic centers at g ∼ 2.00 in all irradiated glasses. Raman spectra of pristine and irradiated samples were acquired, and showed notable changes in glass structure post-irradiation, with the emergence of a broad Raman band at 1560 cm{sup -1} upon irradiation with high fluences. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗