Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPACT SHOCK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Dynamical implications of the petrology and distribution of impact melt rocks

Petrographic and structural relations of rocks resulting from melting of target materials during impact indicate constraints that can be applied to theoretical models and experimental production of craters. Topics discussed in this context include the motion of shock melted material, the mixing of melts, the energies required for heating and melting the necessary volumes of target rocks, diameter to depth ratios, and the formation of structural modifications. The motion of shock melted material involves ejection of some of the lowermost parts of the target, incorporation of distant fragmental material, outward flow, settling into cracks after breccia formation, and completion in a short time span. Melts must be completed within tens of seconds to a couple of minutes after impact.

Phinney, W. C.↗

Shock wave properties of anorthosite and gabbro

Hugoniot data on San Gabriel anorthosite and San Marcos gabbro to 11 GPA are presented. Release paths in the stress-density plane and sound velocities are reported as determined from particl velocity data. Electrical interference effects precluded the determination of accurate release paths for the gabbro. Because of the loss of shear strength in the shocked state, the plastic behavior exhibited by anorthosite indicates that calculations of energy partitioning due to impact onto planetary surfaces based on elastic-plastic models may underestimate the amount of internal energy deposited in the impacted surface material.

Boslough, M. B.↗

Shock wave properties of anorthosite and gabbro

Huyoniot data on San Gabriel anorthosite and San Marcos gabbro to 11 GPA are presented. Release paths in the stress-density plane and sound velocities are reported as determined from partial velocity data. Electrical interference effects precluded the determination of accurate release paths for the gabbro. Because of the loss of shear strength in the shocked state, the plastic behavior exhibited by anorthosite indicates that calculations of energy partitioning due to impact onto planetary surfaces based on elastic-plastic models may underestimate the amount of internal energy deposited in the impacted surface material.

Boslough, M. B.↗

Shock vaporization and the accretion of the icy satellites of Jupiter and Saturn

The known properties of water and ice over a wide range of pressures and temperatures are applied to describe constraints on the shock vaporization processes for water and ice in the solar system. In particular, the role of impact vaporization acting during the formation of the Jovian and Saturnian satellites is examined in an attempt to explain the observed density in terms of composition of these rock and ice objects. A possible model of accretion of icy satellites is considered which predicts that the amount of ice devolatilization is related to planetary size.

Ahrens, T. J.↗

When worlds collide - Jetted vapor plumes and the moon's origin

It is proposed that a collision between a Mars-sized planetesimal and the protoearth explains both the anomalously large angular momentum of the earth-moon system and the similarity between the moon's bulk composition and the earth's mantle. An approximate calculation was performed to obtain information on the highest speed, most highly shocked ejecta and the ejection pattern, speed, angles of launch, etc. as a function of the impact parameter and the ratio of the sizes of the colliding protoplanets. Computation results are in agreement with the megaimpact hypothesis.

Melosh, H. J.↗

Seawater strontium isotopes, acid rain, and the Cretaceous-Tertiary boundary

A large bolide impact at the end of the Cretaceous would have produced significant amounts of nitrogen oxides by shock heating of the atmosphere. The resulting acid precipitation would have increased continental weathering greatly and could be an explanation for the observed high ratio of strontium-87 to strontium-86 in seawater at about this time, due to the dissolution of large amounts of strontium from the continental crust. Spikes to high values in the seawater strontium isotope record at other times may reflect similar episodes.

Macdougall, J. D.↗

Response of marine and freshwater algae to nitric acid and elevated carbon dioxide levels simulating environmental effects of bolide impact

One of the intriguing facets of the Cretaceous-Tertiary extinction is the apparently selective pattern of mortality amongst taxa. Some groups of organisms were severely affected and some remained relatively unscathed as they went through the K/T boundary. While there is argument concerning the exact interpretation of the fossil record, one of the best documented extinctions at the Cretaceous-Tertiary boundary is that of the calcareous nannoplankton. These organisms include coccolithic algae and foraminiferans. Attempts to explain their decline at the K/T boundary center around chemistry which could affect their calcium carbonate shells while leaving their silica-shelled cousins less affected or unaffected. Two environmental consequences of an extraterrestrial body impact which were suggested are the production of large quantities of nitrogen oxides generated by the shock heating of the atmosphere and the possible rise in CO2 from the dissolution of CaCO3 shells. Both of these phenomena would acidify the upper layers of the oceans and bodies of freshwater not otherwise buffered. The effects of nitric acid, carbon dioxide, or both factors on the growth and reproduction of calcareous marine coccoliths and non-calcareous marine and freshwater species of algae were considered. These experiments demonstrate that nitric acid and carbon dioxide have significant effects on important aspects of the physiology and reproduction of modern algae representative of extinct taxa thought to have suffered significant declines at the Cretaceous-Tertiary boundary. Furthermore, calcareous species showed more marked effects than siliceous species and marine species tested were more sensitive than freshwater species.

Boston, P. J.↗

The end-triassic mass extinction event

The end-Triassic is the least studied of the five major episodes of mass extinction recognized in the Phanerozoic, and the Triassic-Jurassic boundary is not precisely defined in most parts of the world, with a paucity of good marine sections and an insufficiency of biostratigraphically valuable fossils. Despite these limitations it is clear that there was a significant episode of mass extinction, affecting many groups, in the Late Norian and the existing facts are consistent with it having taken place at the very end of the period. The best record globally comes from marine strata. There was an almost complete turnover of ammonites across the T-J boundary, with perhaps no more than one genus surviving. About half the bivalve genera and most of the species went extinct, as did many archaeogastropods. Many Paleozoic-dominant brachiopods also disappeared, as did the last of the conodonts. There was a major collapse and disappearance of the Alpine calcareous sponge. Among terrestrial biota, a significant extinction event involving tetrapods was recognized. With regard to possible environmental events that may be postulated to account for the extinctions, there is no evidence of any significant global change of climate at this time. The existence of the large Manicouagan crater in Quebec, dated as about late or end-Triassic, has led to the suggestion that an impact event might be implicated, but so far despite intensive search no unequivocal iridium anomaly or shocked quartz was discovered. On the other hand there is strong evidence for significant marine regression in many parts of the world. It is proposed therefore that the likeliest cause of the marine extinctions is severe reduction in habitat area caused either by regression of epicontinental seas, subsequent widespread anoxia during the succeeding transgression, or a combination of the two.

Hallam, A.↗

Multishock Shield Against Meteoroids And Debris

Two documents discuss "multi-shock shielding" concept, according to which multiple spaced, very thin layers of material protects spacecraft against impacts by meteoroids, orbiting debris, or other projectiles traveling at hypervelocities. According to concept, incoming projectile broken up upon impact on first (outermost) layer, and fragments further broken up by subsequent layers. At each successive surface, impact pressure heats fragments, eventually melting and/or vaporizing them.

Cour-Palais, Burton G.↗

Vapor plumes: A neglected aspect of impact cratering

When a meteorite or comet strikes the surface of the planet or satellite at typical interplanetary velocities of 10-40 km/sec, the projectile and a quantity of the target body vaporize and expand out of the growing crater at high speed. The crater continues to grow after the vapor plume has formed and the series of ejecta deposits is laid down ballistically while the crater collapses into its final morphology. Although the vapor plume leaves little evidence of its existence in the crater structure of surface deposits, it may play a major role in a number of impact-related processes. The vapor plume expanding away from the site of an impact carries 25-50 percent of the total impact energy. Although the plume's total mass is only a few times the mass of the projectile, its high specific energy content means that it is the fastest and most highly shocked material in the cratering event. The mean velocity of expansion can easily exceed the escape velocity of the target plane, so that the net effect of a sufficiently high-speed impact is to erode material from the planet.

Melosh, H. J.↗

Influence of airfoil geometry on delta wing leading-edge vortices and vortex-induced aerodynamics at supersonic speeds

An assessment of the influence of airfoil geometry on delta wing leading edge vortex flow and vortex induced aerodynamics at supersonic speeds is discussed. A series of delta wing wind tunnel models were tested over a Mach number range from 1.7 to 2.0. The model geometric variables included leading edge sweep and airfoil shape. Surface pressure data, vapor screen, and oil flow photograph data were taken to evaluate the complex structure of the vortices and shocks on the family of wings tested. The data show that airfoil shape has a significant impact on the wing upper surface flow structure and pressure distribution, but has a minimal impact on the integrated upper surface pressure increments.

Wood, Richard M.↗

Plasma wave observations at Neptune

Phenomena detected by the plasma wave instrument during the Voyager 2 flyby of Neptune are reviewed. Particular attention given to radio emissions, electron plasma oscillations in the solar wind upstream of the bow shock, electrostatic electron cyclotron waves and upper hybrid resonance (UHR) waves, whistler mode noise, and dust impacts. The radio emissions which occur in a broad range of about 5 to 50 kHz are considered to be generated by mode conversion from UHR waves at the magnetic equator. The inner magnetosphere has relatively low plasma wave intensities (less than 100 microV/m). Many small micron-sized dust particles which were detected striking the spacecraft had the maximum impact rate of about 280 impacts per sec at the bound ring plane crossing, and about 110 impacts per sec at the outbound ring plane crossing. Most of the particles were concentrated in a dense disk, about one thousand km thick, near the equatorial plane.

Gurnett, D. A.↗

Explosions of infalling comets in Jupiter's atmosphere

In view of the expected collision of comet Shoemaker-Levy 9 (1993e) with Jupiter in 1994 July, we calculate basic properties of the initial interaction for a simplified Jovian atmosphere. The comet is expected to impact Jupiter at 60 km/sec and at an angle of 45 deg to the zenith. The shock wave generated by the bolide should be optically thick once it has penetrated to an atmospheric density approximately 10(exp -6) gr/cm(exp 3), and we calculate the post-shock conditions assuming local thermodynamic equilibrium (LTE) for shock velocities v(sub sh) in the range 10 to 60 km/sec and preshock densities rho(sub a) = 10(exp -6) to 10(exp -2) gr/cm(exp 3). Our shock calculations include molecular hydrogen, atomic hydrogen, ionized hydrogen, neutral helium, and singly ionized helium. Even at the highest shock velocity, the gas is only partially ionized and the postshock temperature rises with preshock density in order to maintain the ionization. The value of the effective shock adiabatic index gamma(sub sh) varies from 1.17 (at low v(sub sh) and rho(sub a) to 1.40 (at high v(sub sh) and rho(sub a). The ablation rate is limited by the radiative flux that reaches the bolide surface. We argue that the ablated gas does not efficiently transfer its kinetic energy to the atmosphere, and it ultimately slows in a similar fashion to the comet material. As the bolide initially falls through the atmosphere, the character of the shock emission changes. At rho(sub a) approximately 10(exp -8) gr/cm (exp 3), the gas is optically thin and we expect line emission; in the optical spectrum, Balmer emission is expected from the shocked atmosphere and low-ionization metal lines from ablated cometary material. At rho(sub a) approximately 10(exp -6) gr/m(exp 3), the shocked gas is optically thick and the shock front near the bolide produces a blackbody spectrum. The temperature is favorable for ultraviolet (1000 to 3000 A) emission and the luminosity may be approximately 5 x 10(exp 23) ergs/sec for approximately 0.6 sec for a bolide 1 km in radius. At rho(sub a) approximately 10(exp -4) gr/cm(exp 3), the bolide has passed below the ultraviolet photosphere. The shock front emits considerable ionizing radiation, but it is absorbed in a narrow preshock region. The bolometric correction for the optical luminosity is large and we expect a 3000 to 8000 A luminosity of approximately 3 x 10(exp 23) ergs/sec for approximately 1 sec. The optical emission is strongly peaked in the vicinity of the bolide. The bolide does have a somewhat less luminous, optically thick trail extending greater than or equal to 10 km, but the radiation is characterized by a temperature of 4000 to 5000 K. From the fragmentation model of Chyba, Thomas, & Zahnle (1993), the bolide deposits most of its kinetic energy at rho(sub a) approximately 10(exp -3) gr/cm(exp 3) and this is the effective explosion site. The shock wave from such an explosion can move up about one density scale height. We examine the breakout of the shock front from the Jovian atmosphere and find that the shock acceleration in the decreasing density region is slow, so that the energy flux in the shock front is small. Higher velocities might be generated by shock acceleration along the channel left by the bolide if the shock motion can occur before the channel closes off as a result of radiative cooling. Hot gas created by the explosion ultimately rises due to buoyancy on a timescale of a minute. The luminosity is highest when the bubble first rises into the optically thin part of the atmosphere and may be approximately 1 x 10(exp 25) ergs/sec in the near-infrared. Roughly 1% of the initial bolide energy may be radiated in this way; the rest of the energy is lost to sound waves from the initial explosion and to work done by the bubble on the surrounding atmosphere.

Chevalier, Roger A.↗

Shock compression modeling of metallic single crystals: comparison of finite difference, steady wave, and analytical solutions

Background: The shock response of metallic single crystals can be captured using a micro-mechanical description of the thermoelastic-viscoplastic material response; however, using a such a description within the context of traditional numerical methods may introduce a physical artifacts. Advantages and disadvantages of complex material descriptions, in particular the viscoplastic response, must be framed within approximations introduced by numerical methods. Methods: Three methods of modeling the shock response of metallic single crystals are summarized: finite difference simulations, steady wave simulations, and algebraic solutions of the Rankine-Hugoniot jump conditions. For the former two numerical techniques, a dislocation density based framework describes the rate- and temperature-dependent shear strength on each slip system. For the latter analytical technique, a simple (two-parameter) rate- and temperature-independent linear hardening description is necessarily invoked to enable simultaneous solution of the governing equations. For all models, the same nonlinear thermoelastic energy potential incorporating elastic constants of up to order 3 is applied. Results: Solutions are compared for plate impact of highly symmetric orientations (all three methods) and low symmetry orientations (numerical methods only) of aluminum single crystals shocked to 5 GPa (weak shock regime) and 25 GPa (overdriven regime). Conclusions: For weak shocks, results of the two numerical methods are very similar, regardless of crystallographic orientation. For strong shocks, artificial viscosity affects the finite difference solution, and effects of transverse waves for the lower symmetry orientations not captured by the steady wave method become important. The analytical solution, which can only be applied to highly symmetric orientations, provides reasonable accuracy with regards to prediction of most variables in the final shocked state but, by construction, does not provide insight into the shock structure afforded by the numerical methods.

36 MATERIALS SCIENCE↗

Explanation of anomalous shock temperatures in shock-loaded Mo samples measured using neutron resonance spectroscopy

Neutron resonance spectrometry (NRS) has been used to measure the temperature inside Mo samples during shock loading. The temperatures obtained were significantly higher than predicted assuming ideal hydrodynamic loading, a discrepancy which we now explain. The effects of plastic flow and nonideal projectile behavior were assessed. Plastic flow was calculated self-consistently with the shock jump conditions: this is necessary for a rigorous estimate of the locus of shock states accessible. Plastic flow was estimated to contribute a temperature rise of 53 K compared with hydrodynamic flow. Simulations were performed of the operation of the explosively driven projectile system used to induce the shock in the Mo sample. The simulations, and related experiments, indicated that the projectile was significantly curved on impact, and still accelerating. The resulting spatial variations in load, including radial components of velocity, should increase the apparent temperature that would be deduced from the width of the neutron resonance by 160 K. These corrections are sufficient to reconcile the apparent temperatures deduced using NRS with the accepted properties of Mo, in particular, its equation of state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Drag Reduction by Laser-Plasma Energy Addition in Hypersonic Flow

An experimental study was conducted to investigate the drag reduction by laser-plasma energy addition in a low density Mach 7 hypersonic flow. The experiments were conducted in a shock tunnel and the optical beam of a high power pulsed CO{sub 2} TEA laser operating with 7 J of energy and 30 MW peak power was focused to generate the plasma upstream of a hemispherical model installed in the tunnel test section. The non-intrusive schlieren optical technique was used to visualize the effects of the energy addition to hypersonic flow, from the plasma generation until the mitigation of the shock wave profile over the model surface. Aside the optical technique, a piezoelectric pressure transducer was used to measure the impact pressure at stagnation point of the hemispherical model and the pressure reduction could be observed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computational modeling of electrostatic charge and fields produced by hypervelocity impact

Following prior experimental evidence of electrostatic charge separation, electric and magnetic fields produced by hypervelocity impact, we have developed a model of electrostatic charge separation based on plasma sheath theory and implemented it into the CTH shock physics code. Preliminary assessment of the model shows good qualitative and quantitative agreement between the model and prior experiments at least in the hypervelocity regime for the porous carbonate material tested. The model agrees with the scaling analysis of experimental data performed in the prior work, suggesting that electric charge separation and the resulting electric and magnetic fields can be a substantial effect at larger scales, higher impact velocities, or both.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Failure Mechanisms in Fored, Layered, and Additive Manufactured Titanium due to Hypervelocity Impact: Experiments and Simulations

This article presents a study of dynamic failure events in forged, layered, and additive manufactured (AM) titanium alloy subject to hypervelocity impact. Experiments were conducted using a two stage light-gas gun, 0.22-caliber Lexan projectiles, and different types of titanium target plates. A four-channel Photonic Doppler Velocimetry (PDV) system was used to study the free surface velocities to provide an understanding of the different failure mechanisms in these materials. The experimental measurements were used to validate computational simulations, which describe the behavior of these materials under shock. It was determined that AM, forged titanium, and multi-layered stacks produce similar velocity profiles during the early stage of impact, with the AM targets exhibiting spall at lower velocities and the multi-layered stacks exhibiting vibrations between plates. Simulations of solid and layered forged materials provide a good match to experimental data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗