Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “History”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Quantum games: a review of the history, current state, and interpretation

We review both theoretical and experimental developments in the area of quantum games since the inception of the subject circa 1999. Here, we will also offer a narrative on the controversy that surrounded the subject in its early days, and how this controversy has affected the development of the subject.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of transmitted blast force-time histories

A simple, reliable, and cost effective method is presented for the measurement of transmitted force behind a panel subjected to blast loads. Sensors were designed for a specific blast environment and successfully used to measure transmitted blast force behind solid polyethylene plates of thickness 0.125 and 0.25 inches. Experimental data was collected and examined to reveal consistent differences in the response of different thicknesses of otherwise identical panels. Finally, recommendations are made for future design, construction and use of similar sensors.

47 OTHER INSTRUMENTATION↗

High-Speed Friction Stir Welding of AA7075-T6 Sheet: Microstructure, Mechanical Properties, Micro-texture, and Thermal History

Friction-stir-welding (FSW) is a cost-effective and high quality joining process for aluminum alloys (especially heat-treatable allo ys) that has been applied successfully in the aerospace industry. However, the full potential of FSW on more cost-sensitive applications is still limited by the production rate, namely the welding speed of the process. The majority of literature evaluating FSW of aluminum alloys is based on welds made in the range of welding speeds around hundreds of millimeters per minute, and only a handful are at a moderate speed of 1 m/min. In this study we present a microstructural analysis of friction stir welded AA7075-T6 blanks with welding speeds up to 3 m/min. Textures, microstructures, mechanical properties, and weld quality are analyzed using TEM, EBSD, metallographic imaging, and Vickers hardness. Results are coupled with welding parameters to aid in the understanding of the complex material flow and texture gradients within the welds in an effort to optimize welding parameters for high speed processing.

Zhang, Jingyi↗

Influence of Thermal History on the Hot Ductility of a Continuously Cast Low Alloyed Cr-Mo Steel

The hot ductility of a low alloyed Cr-Mo steel has been investigated to evaluate the surface cracking sensitivity within the straightening or unbending regime during the continuous casting process. Tensile samples were subjected to various thermal treatments, including melting and solidification, and were tested at deforming temperatures ranging between 600 and 1100 °C using a strain rate of 10{sup −3} s{sup −1}. Hot ductility was evaluated based on reduction in area measurement and metallographic investigations. The investigated steel exhibits a drop in ductility at around 800 °C due to intergranular cracking. Microstructural examinations and supplementary thermokinetic computer simulations were carried out to describe the evolution of the microstructure during solidification and cooling.

36 MATERIALS SCIENCE↗

Effects of Environmental Conditions on the Mechanical and Degradation Behavior of Polyurethane Foam Subjected to Various Deformation Histories

Since its development, polyurethane foam (PUF) has been widely used as an insulator, including in the marine industry. Liquefied natural gas (LNG) carriers have the highest market share in the LNG-related shipbuilding industry. PUF is used as an insulator in membrane-type cargo containment systems (CCSs) as one of the most important components of LNG carriers. Because PUF is subjected to constant load and deformation when used in insulation for LNG CCSs and is exposed to the cryogenics of the seawater environment for extended times, it is essential to evaluate the mechanical behavior of PUF in such environments. In this study, to investigate the effects of applying an initial strain and of immersion in various media on the mechanical properties of PUF, compression tests were carried out at ambient and cryogenic temperature using a universal testing machine. The mechanical behavior of PUF after deformation recovery upon subjection to various initial strain levels was estimated experimentally. In addition, the microstructure of the PUF specimen prior to testing was analyzed to investigate the effects of the initial strain level and immersion in different media on the mechanical behavior of PUF.

36 MATERIALS SCIENCE↗

Risk factors, clinical outcomes, and natural history of uveal melanoma: a single-institution analysis

Uveal melanoma (UM) is the most common primary intraocular malignancy in adults. We describe the characteristics of UM patients at a tertiary referral center in the Mid-Southern United States, and explore associations and predictors of outcomes. This is a retrospective cohort study of patients with UM seen at West Cancer Center, from 07/2006 to 08/2017. Clinical characteristics and their relationship to outcomes (time-to-death and metastasis) were explored using Cox regression analysis. We identified 208 patients, 51% males, 97% Caucasians, 80% were symptomatic, with a median follow-up of 2.34 years, IQR (1.01–3.03), of which 19.2% died during follow-up. Metastases were diagnosed in 19% (4 older patients had metastases at diagnosis), 53% of those by surveillance. Without considering metastases as a time-varying covariate, age (HR = 1.06/year, CI 1.0–1.1; p < 0.001), headaches (HR = 5.7, CI 1.6–20.5; p = 0.03), and tumor stage (T) were significant covariates for time-to-death. Tumor stages T3 versus T1 (HR = 6.4; CI 1.5–27.7; p = 0.01) and T4 versus T1 (HR = 5.98; CI 1.3–27.8; p = 0.02) were associated with worse outcomes. When considering metastases as a time-varying covariate (HR = 35.8, CI 17–75.2; p < 0.001), only age remains in the model (HR = 1.04/year; p < 0.001). However, tumor stage (p < 0.001), headaches (p = 0.008), and age (p < 0.001) are associated with time-to-metastasis. One in five patients developed metastasis which was the most influential factor on mortality. Predictors of mortality were metastasis, age, tumor stage, and headache as a reported symptom. Surveillance successfully diagnosed metastatic disease in most patients. Most patients had symptoms preceding their UM diagnosis highlighting an opportunity for earlier recognition of UM.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

The DOE Bioenergy Research Centers: History, Operations, and Scientific Output

Over the past 7 years, the US Department of Energy's Office of Biological and Environmental Research has funded three Bioenergy Research Centers (BRCs). These centers have developed complementary and collaborative research portfolios that address the key technical and economic challenges in biofuel production from lignocellulosic biomass. All three centers have established a close, productive relationship with DOE's Joint Genome Institute (JGI). This special issue of Bioenergy Research samples the breadth of basic science and engineering work required to underpin a diverse, sustainable, and robust biofuel industry. In this report, which was collaboratively produced by all three BRCs, we discuss the BRC contributions over their first 7 years to the development of renewable transportation fuels. In additon, we also highlight the BRC research published in the current issue and discuss technical challenges in light of recent progress.

09 BIOMASS FUELS↗

An unmet clinical need: The history of thrombus imaging

Robust thrombus imaging is an unresolved clinical unmet need dating back to the mid 1970s. While early molecular imaging approaches began with nuclear SPECT imaging, contrast agents for virtually all biomedical imaging modalities have been demonstrated in vivo with unique strengths and common weaknesses. Two primary molecular imaging targets have been pursued for thrombus imaging: platelets and fibrin. Some common issues noted over 40 years ago persist today. Acute thrombus is readily imaged with all probes and modalities, but aged thrombus remains a challenge. Similarly, anti-coagulation continues to interfere with and often negate thrombus imaging efficacy, but heparin is clinically required in patients suspected of pulmonary embolism, deep venous thrombosis or coronary ruptured plaque prior to confirmatory diagnostic studies have been executed and interpreted. These fundamental issues can be overcome, but an innovative departure from the prior approaches will be needed.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

The Influence of Fog and Airmass History on Aerosol Optical, Physical and Chemical Properties at Pt. Reyes National Seashore

This paper presents an analysis of the aerosol chemical composition, optical properties and size distributions for a range of conditions encountered during a field measurement campaign conducted between July 7-29, 2005 at Point Reyes National Seashore, north of San Francisco, CA. Observations are partitioned into one-hour periods when conditions were ‘clear’ or ‘foggy’ to identify evidence of cloud processing of aerosols. During the first half of the campaign (July 7-18), conditions at the site were largely maritime. However flow during the second half of the campaigns (July 18-29) was influenced by a thermal trough that added a cyclonic twist to the incoming marine air, bringing it from the south with a more extensive over-land trajectory. Neither flow regime was associated with air coming from the San Francisco Bay area to the south. Measurements by an Aerodyne aerosol mass spectrometer (AMS) of the equivalent molar ratio of ammonium to the sum of sulfate, nitrate and chloride made before the onset of the thermal trough on July 18th were associated with acidic or near-neutral particles. Measurements made after July 18th appear to have excess ammonium. The AMS measurements of mass loading were an order of magnitude less than those reported by a nearby IMPROVE station. However, the AMS measures only non-refractory particles between 0.1 µm and 1 µm, which would not include sea salt. In contrast, the IMPROVE station employs filter-based techniques to measure mass for all particles < 2.5 µm. Assuming chlorine is associated with large sea salt particles at Pt. Reyes and removing this value from the IMPROVE data resulted in good agreement in the total mass fraction between these two techniques,, indicating the importance of sea salt mass in particles greater than 1 µm. Model calculations of the equilibrium gas-phase mixing ratio of NH3 suggest very high values which we attribute to agricultural practices within the park. Reported as an incidental finding is evidence for the cloud droplet activation of large particles (diameter >0.2 mm) with a corresponding reduction in the single scattering albedo of the non-activated particles, followed by a return in the particle size spectrum to the pre-fog conditions immediately afterwards.

54 ENVIRONMENTAL SCIENCES↗

Switchgrass selection as a "model" bioenergy crop: A history of the process

A review of several publications of the Oak Ridge National Laboratory's Biofuels Feedstock Development Program and final reports from the herbaceous crop screening trials show that technology, environmental, and funding issues influenced the decision to focus on a single herbaceous model crop species. Screening trials funded by the U.S. Department of Energy in the late 1980s to early 1990s assessed thirty-four herbaceous species on a wide range of soil types at thirty-one different sites spread over seven states in crop producing regions of the U.S. Several species, including sorghums, reed canarygrass, wheatgrasses, and other crops, were identified as having merit for further development. Six of the seven institutions performing the screening included switchgrass among the species recommended for further development in their region and all recommended that perennial grasses be given high research priority. Reasons for the selection of switchgrass included demonstration of relatively high, reliable productivity across a wide geographical range, suitability for marginal quality land, low water and nutrient requirements, and other positive environmental attributes. Crop screening results, economic and environmental assessments by the Biofuels Feedstock Development Program staff, and Department of Energy funding limitations all contributed to the decision to further develop only switchgrass as a model or prototype species in 1991. The following ten year focus on development of switchgrass as a bioenergy crop proved the value of focusing on a single model herbaceous crop. The advancements and attention gained were sufficient to give government leaders, policymakers, farmers, and biofuel industry developers the confidence that lignocellulosic crops could support an economically viable and environmentally sustainable biofuel industry in the U.S.

54 ENVIRONMENTAL SCIENCES↗

Revealing the temperature history in concrete after fire exposure by microscopic analysis

Concrete structures behave in most cases very well during a fire, after which it is often possible to repair or strengthen the structure to a certain level. This could result in important economic benefits, as costs for demolition and rebuilding can be avoided and the building can be reused faster. In this paper three methods for determining the maximum temperature to which a concrete structure was submitted during a fire are studied. Knowledge of the temperature distribution is necessary to assess the overall damage of a concrete structure. First, the physico-chemical transformations of heated concrete are investigated with scanning electron microscopy (SEM). Secondly, the features visible under the polarising and fluorescent microscope (PFM) are discussed. And third, the influence of heat on the colour of the aggregates is analysed.

36 MATERIALS SCIENCE↗

Investigation of process history and underlying phenomena associated with the synthesis of plutonium oxides using Vector Quantizing Variational Autoencoder

Accurate, high throughput, and unbiased analysis of plutonium oxide particles is needed for analysis of the phenomenology associated with process parameters in their synthesis. Compared to qualitative and taxonomic descriptors, quantitative descriptors of particle morphology through scanning electron microscopy (SEM) have shown success in analyzing process parameters of uranium oxides. Among other candidates, a neural network called a Vector Quantizing Variational Autoencoder (VQ-VAE) has shown the ability to quantitatively describe particle morphology to attain >85% accuracy in identifying uranium oxide processing routes. We utilize a VQ-VAE to quantitatively describe plutonium dioxide (PuO 2 ) particles created in a designed experiment and investigate their phenomenology and prediction of their process parameters. PuO 2 was calcined from Pu(III) oxalates that were precipitated under varying synthetic conditions that related to concentrations, temperature, addition and digestion times, precipitant feed, and strike order; the surface morphology of the resulting PuO 2 powders were analyzed by SEM. A pipeline was developed to extract and quantify useful image representations for individual particles with the VQ-VAE, then further reduce the dimensionality of the feature space using a bottlenecking neural network fit to perform multiple classification tasks simultaneously. The reduced feature space could predict process parameters with greater than 80% accuracies for some parameters with a single particle. They also showed utility for grouping particles with similar surface morphology characteristics together. Both the clustering and classification results reveal valuable information regarding which chemical process parameters chiefly influence the PuO 2 particle morphologies: strike order and oxalic acid feedstock. Doing the same analysis with multiple particles was shown to improve the classification accuracy on each process parameter over the use of a single particle, with statistically significant results generally seen with as few as four particles in a sample.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗