Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HIGH EXPLOSIVES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Dynamics of vapor emissions at wire explosion threshold

X-pinch plasmas have been actively studied in the recent years. Numerical simulation of the ramp-up of metallic vapor emissions from wire specimens shows that under impulsive Ohmic heating the wire core invariably reaches a supercritical state before explosion. The heating rate depends sensitively on the local wire resistance, leading to highly variable vapor emission flux along the wire. To examine the vapor emission process, we have visualized nickel wire explosions by means of shock formation in air. In a single explosion as captured by shadowgraphy, there usually appear several shocks with spherical or cylindrical wave front originating from different parts of the wire. Growth of various shock fronts in time is well characterized by a power-law scaling in one form or another. Continuum emission spectra are obtained and calibrated to measure temperature near the explosion threshold. Shock front structures and vapor plume temperature are examined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

General-relativistic three-dimensional multi-group neutrino radiation-hydrodynamics simulations of core-collapse supernovae

We report on a set of long-term general-relativistic three-dimensional (3D) multi-group (energy-dependent) neutrino radiation-hydrodynamics simulations of core-collapse supernovae. We employ a full 3D two-moment scheme with the local M1 closure, three neutrino species, and 12 energy groups per species. With this, we follow the post-core-bounce evolution of the core of a nonrotating 27-M{sub ⊙} progenitor in full unconstrained 3D and in octant symmetry for ≳380 ms. We find the development of an asymmetric runaway explosion in our unconstrained simulation. We test the resolution dependence of our results and, in agreement with previous work, find that low resolution artificially aids explosion and leads to an earlier runaway expansion of the shock. At low resolution, the octant and full 3D dynamics are qualitatively very similar, but at high resolution, only the full 3D simulation exhibits the onset of explosion.

79 ASTRONOMY AND ASTROPHYSICS↗

Advancing the Physics Basis of Quiescent H-mode through Exploration of ITER Relevant Parameters

Recent experiments on DIII-D have overcome a long-standing limitation in accessing quiescent H-mode (QH-mode), a high confinement state of the plasma that does not exhibit the explosive instabilities associated with edge localized modes (ELMs). In the past, QH-mode was associated with low density operation, but has now been extended to high normalized densities compatible with operation envisioned for ITER. Through the use of strong shaping, QH-mode plasmas have been maintained at high densities, both absolute (ηe ≈ 7 × 1019 m—3) and normalized Greenwald fraction (ηe/ηG > 0:7) . In these plasmas, the pedestal can evolve to very high pressures and current as the density is increased. Calculations of the pedestal height and width from the EPED model are quantitatively consistent with the experimental observed evolution with density. The comparison of the dependence of the maximum density threshold for QH-mode with plasma shape help validate the underlying theoretical peeling-ballooning models describing ELM stability. High density QH-mode operation with strong shaping has allowed stable access to a previously predicted regime of very high pedestal dubbed \Super H-mode". In general, QH-mode is found to achieve ELM-stable operation while maintaining adequate impurity exhaust, due to the enhanced impurity transport from an edge harmonic oscillation, thought to be a saturated kink- peeling mode driven by rotation shear. In addition, the impurity confinement time is not affected by rotation, even though the energy confinement time and measured E Χ B shear is observed to increase at low toroidal rotation. Together with demonstrations of high beta, high confinement and low q95 for many energy confinement times, these results suggest QH-mode as a potentially attractive operating scenario for ITER's Q=10 mission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Are Plinian type eruptions possible on Venus?

Calculations of dynamics of eruption plumes in the Venusian atmosphere reveal the following results: (1) conditions for a convective eruption column are very limited on Venus with required magma temperatures higher than 1100 K; otherwise pyroclastic flows form; (2) once a convective eruption column is established, it may extend as high as about the tropopause (approximately 60 km); and (3) critical eruption velocities for a convective eruption column as a function of temperature and gas content of magma may provide a useful tool for estimating interior condition of Venus, including its volatile inventory. Volcanism is a major process to transport volatile from mantle of a planet to its surface (degassing) as well as heat and mass, all of which affect planetary evolution. For example, after completion of planetary accretion, volcanism is the dominant continuous degassing process for all the terrestrial planets. Explosive volcanism is a very important process for mantle degassing due to its high magma gas content. Consequently, eruption styles and the controlling physical processes need to be understood. Recent satellite and terrestrial ground-based observations suggest existence of explosive volcanism on Venus even though explosive volcanism is very difficult to occur on Venus due to its high atmospheric pressure. The purpose is to investigate dynamics of explosive eruption on Venus and the relation between eruption conditions such as gas content and temperature of magma and eruption velocity, and eruption styles such as Plinian type and pyroclastic flow type.

Sugita, Seiji↗

Optical and ultraviolet observations of the narrow-lined type Ia SN 2012fr in NGC 1365

Extensive optical and ultraviolet (UV) observations of the type Ia supernova (SN Ia) 2012fr are presented in this paper. It has a relatively high luminosity, with an absolute B-band peak magnitude of about –19.5 mag and a smaller post-maximum decline rate than normal SNe Ia (e.g., Δm {sub 15}(B) =0.85 ± 0.05 mag). Based on the UV and optical light curves, we derived that a {sup 56}Ni mass of about 0.88 M {sub ☉} was synthesized in the explosion. The earlier spectra are characterized by noticeable high-velocity features of Si II λ6355 and Ca II with velocities in the range of ∼22, 000-25, 000 km s{sup –1}. At around the maximum light, these spectral features are dominated by the photospheric components which are noticeably narrower than normal SNe Ia. The post-maximum velocity of the photosphere remains almost constant at ∼12,000 km s{sup –1} for about one month, reminiscent of the behavior of some luminous SNe Ia like SN 1991T. We propose that SN 2012fr may represent a subset of the SN 1991T-like SNe Ia viewed in a direction with a clumpy or shell-like structure of ejecta, in terms of a significant level of polarization reported in Maund et al. in 2013.

79 ASTRONOMY AND ASTROPHYSICS↗

Explosive X-point collapse in relativistic magnetically dominated plasma

The extreme properties of the gamma-ray flares in the Crab nebula present a clear challenge to our ideas on the nature of particle acceleration in relativistic astrophysical plasma. It seems highly unlikely that standard mechanisms of stochastic type are at work here and hence the attention of theorists has switched to linear acceleration in magnetic reconnection events. In this series of papers, we attempt to develop a theory of explosive magnetic reconnection in highly magnetized relativistic plasma which can explain the extreme parameters of the Crab flares. In the first paper, we focus on the properties of the X-point collapse. Using analytical and numerical methods (fluid and particle-in-cell simulations) we extend Syrovatsky’s classical model of such collapse to the relativistic regime. We find that the collapse can lead to the reconnection rate approaching the speed of light on macroscopic scales. During the collapse, the plasma particles are accelerated by charge-starved electric fields, which can reach (and even exceed) values of the local magnetic field. The explosive stage of reconnection produces non-thermal power-law tails with slopes that depend on the average magnetization $\unicode[STIX]{x1D70E}$ . For sufficiently high magnetizations and vanishing guide field, the non-thermal particle spectrum consists of two components: a low-energy population with soft spectrum that dominates the number census; and a high-energy population with hard spectrum that possesses all the properties needed to explain the Crab flares.

Physics↗

Potential Signature of Population III Pair-instability Supernova Ejecta in the BLR Gas of the Most Distant Quasar at z = 7.54*

The search for Population III stars has fascinated and eluded astrophysicists for decades. One promising place for capturing evidence of their presence must be high-redshift objects; signatures should be recorded in their characteristic chemical abundances. We deduce the Fe and Mg abundances of the broadline region (BLR) from the intensities of ultraviolet Mg ii and Fe ii emission lines in the near-infrared spectrum of UKIDSS Large Area Survey (ULAS) J1342+0928 at z = 7.54, by advancing our novel flux-to-abundance conversion method developed for quasars up to z ~ 3. We find that the BLR of this quasar is extremely enriched, by a factor of 20 relative to the solar Fe abundance, together with a very low Mg/Fe abundance ratio: [Fe/H] = +1.36 ± 0.19 and [Mg/Fe] =-1.11 ± 0.12, only 700 million years after the Big Bang. We conclude that such an unusual abundance feature cannot be explained by the standard view of chemical evolution that considers only the contributions from canonical supernovae. While there remains uncertainty in the high-mass end of the Population III initial mass function, here we propose that the larger amount of iron in ULAS J1342+0928 was supplied by a pair-instability supernova (PISN) caused by the explosion of a massive Population III star in the high-mass end of the possible range of 150–300 M ⊙ . Chemical evolution models based on initial PISN enrichment well explain the trend in [Mg/Fe]-z all the way from z < 3 to z = 7.54. We predict that stars with very low [Mg/Fe] at all metallicities are hidden in the galaxy, and they will be efficiently discovered by ongoing new-generation photometric surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

Similar explosive eruptions of lunar and terrestrial volcanoes

A mathematical model of one-dimensional, steady duct flow of a mixture of gas and small solid particles (rock), has been applied to the earth and the moon under geometrically and dynamically similar conditions to simulate explosive eruption conditions. Numerical results for equilibrium two-phase flows for lunar and terrestrial explosive eruptions under similar conditions indicate that: (1) a lunar explosive vent is much larger than the corresponding terrestrial vent, (2) the exit velocity from the lunar explosive flow may be higher than the lunar escape velocity, but the exit velocity of terrestrial explosive flow is much less than that of the lunar case (this result supports the hypothesis that Australian tektites came from the moon as a stream of a mixture of rock and gas of extremely high speed), and (3) the thermal effects on the lunar explosive flows are much larger than those of the terrestrial case.

Pai, S. I.↗

Particle acceleration and plasma dynamics during magnetic reconnection in the magnetically dominated regime

Magnetic reconnection is thought to be the driver for many explosive phenomena in the universe. The energy release and particle acceleration during reconnection have been proposed as a mechanism for producing high-energy emissions and cosmic rays. We carry out two- and three-dimensional (3D) kinetic simulations to investigate relativistic magnetic reconnection and the associated particle acceleration. The simulations focus on electron–positron plasmas starting with a magnetically dominated, force-free current sheet (σ≡B{sup 2}/(4πn{sub e}m{sub e}c{sup 2})≫1). For this limit, we demonstrate that relativistic reconnection is highly efficient at accelerating particles through a first-order Fermi process accomplished by the curvature drift of particles along the electric field induced by the relativistic flows. This mechanism gives rise to the formation of hard power-law spectra f∝(γ−1){sup −p} and approaches p = 1 for sufficiently large σ and system size. Eventually most of the available magnetic free energy is converted into nonthermal particle kinetic energy. An analytic model is presented to explain the key results and predict a general condition for the formation of power-law distributions. The development of reconnection in these regimes leads to relativistic inflow and outflow speeds and enhanced reconnection rates relative to nonrelativistic regimes. In the 3D simulation, the interplay between secondary kink and tearing instabilities leads to strong magnetic turbulence, but does not significantly change the energy conversion, reconnection rate, or particle acceleration. This study suggests that relativistic reconnection sites are strong sources of nonthermal particles, which may have important implications for a variety of high-energy astrophysical problems.

79 ASTRONOMY AND ASTROPHYSICS↗

Explosion behavior investigation and safety assessment of large-format lithium-ion pouch cells

We report large-format lithium-ion (Li-ion) batteries with high energy density for electric vehicles are prone to thermal runaway (or even explosion) under abusive conditions. In this study, overcharge induced explosion behaviors of large-format Li-ion pouch cells with Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2 cathode at different current rates (C-rates) (0.5C, 1C, 2C) were investigated. The explosion characteristics of the cells were elucidated by discussing the evolution of the cell voltage, the surface temperature and the shock wave pressure. Generally, the whole overcharge process could be divided into four stages according to the evolution of several key parameters and the overcharge behaviors; the overcharge C-rate has a great influence on cells’ thermal behaviors. The experimental results showed that the thermal runaway process of Li-ion cells caused by overcharging consisted of two kinds of explosions, physical explosion and chemical explosion. The existence of observable negative pressure zone in the pressure curves indicated that the Li-ion cells are not a self-supplying oxygen system during the explosion. Further, the explosion dynamics parameters were matched. An explosion TNT-equivalent conversion strategy that depended on the pressure of the shock wave was utilized to evaluate the released energy and its hazards. In addition, with respect to the overcharge of Li-ion pouch cells, a safety assessment method and a safety management method were proposed based on the explosion behaviors. From the perspective of battery safety, this study is of great significance for the safety design of Li-ion cells and can provide guidance for engineers to optimize the safety function of battery packs.

25 ENERGY STORAGE↗

A note on the acceleration phase of high-energy particles in the solar flare on 7 July, 1966.

The acceleration phase of solar cosmic rays and relativistic electrons is studied on the basis of the observational data available on the optical, radio, X-ray, and particle events associated with the solar flare that occurred on July 7, 1966. The generating process of hydromagnetic shock waves which excited the type-II radio burst detected at a frequency below about 100 MHz is also discussed. The results of the study suggest that no secondary acceleration process after the explosive phase can contribute much to the generation of high energy particles. The ejection of solar cosmic rays and relativistic electrons seems to be related to the expansion of the magnetic bulge which can trap accelerated electrons from the triggering region of solar flares.

Sakurai, K.↗

Steam explosion of oil palm residues for the production of durable pellets

Here we investigated the effect of steam explosion pretreatment on the physical and mechanical properties of the pellets made from empty fruit bunch (EFB) and palm kernel shell (PKS) and we compared to that of softwood Douglas fir (DF). We found that the high heating value of the empty fruit bunch was increased by 21% after steam explosion pretreatment. The pellet density of EFB and Douglas fir pellets did not change while the pellet density of PKS increased from 1.13 to 1.21 g/cm 3 after steam explosion. That may be attributed to the rapid volatilization of high mass fraction extractives during high pressure steaming and lead to the shrinkage of micropores of the PKS fibers. The maximum brealdng strength of steam exploded EFB and PKS were increased by 63% and 45%, respectively. The required compaction energy for the steam exploded EFB pellet is 44.50 J/g while that of the untreated EFB pellet is 30.15 J/g. Similar to Douglas fir, the required extrusion energy for the steam exploded EFB pellet was about 6 times than that of the untreated EFB pellet. The increased extrusion energy is mainly contributed by the increase in mono-saccharides by auto-hydrolysis during steam explosion pretreatment.

09 BIOMASS FUELS↗

Muon Creation in Supernova Matter Facilitates Neutrino-Driven Explosions

Muons can be created in nascent neutron stars (NSs) due to the high electron chemical potentials and the high temperatures. Because of their relatively lower abundance compared to electrons, their role has so far been ignored in numerical simulations of stellar core collapse and NS formation. However, the appearance of muons softens the NS equation of state, triggers faster NS contraction, and thus leads to higher luminosities and mean energies of the emitted neutrinos. This strengthens the postshock heating by neutrinos and can facilitate explosions by the neutrino-driven mechanism.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Influence of background sources and topographic resolution in the Weather Research and Forecasting Model on xenon plume characteristics at monitoring stations

For many atmospheric monitoring applications, networks of measurement sites—such as the radionuclide stations of the International Monitoring System—can be sparse. With measurement locations potentially hundreds to thousands of kilometers from a release it is important to quantify the effects of physical processes on transport and dispersion of plumes between source and measurement locations. This study addresses the effects of background sources and topography resolution near the release location of radionuclides. We use the Weather Research and Forecasting (WRF) model with inline chemistry to investigate (1) how an additional, time-varying source of 133 Xe, such as an operational medical isotope production facility, contributes to activity concentration measurements at monitoring sites, and (2) how complex topography influences on atmospheric conditions near emission sources impact plume concentrations at varying distances from the source. Two 133 Xe emission sources, including (1) a high flux rate of short duration representing an explosive event, and (2) a variable and continuous background source, are simulated. The continuous background source contributes significantly to total 133 Xe concentrations at several monitoring stations. Further, a WRF simulation at 9 km horizontal resolution is compared with a nested grid simulation, where the innermost domain has a resolution of 1 km. Increased topographic resolution leads to an improved representation of plume responses to local winds, with topographic influences greatest at locations closest to the sources. Differences between the two domain resolutions decrease at greater distances from the sources, as plumes have time to spread and mix and are influenced by synoptic scale circulation patterns that are represented similarly in both simulations.

54 ENVIRONMENTAL SCIENCES↗

Volcanic Radiative Forcing From 1979 to 2015

Using volcanic sulfur dioxide emissions in an aerosol-climate model, we derive a time series of global-mean volcanic effective radiative forcing (ERF) from 1979 to 2015. For 2005–2015, we calculate a global multiannual mean volcanic ERF of 0.08 W/m 2 relative to the volcanically quiescent 1999–2002 period, due to a high frequency of small-to-moderate-magnitude explosive eruptions after 2004. For eruptions of large magnitude such as 1991 Mt. Pinatubo, our model-simulated volcanic ERF, which accounts for rapid adjustments including aerosol perturbations of clouds, is less negative than that reported in the Intergovernmental Panel on Climate Change (IPCC) Fifth Assessment Report (AR5) that only accounted for stratospheric temperature adjustments. We find that, when rapid adjustments are considered, the relation between volcanic forcing and volcanic stratospheric optical depth (SAOD) is 13–21% weaker than reported in IPCC AR5 for large-magnitude eruptions. Further, our analysis of the recurrence frequency of eruptions reveals that sulfur-rich small-to-moderate-magnitude eruptions with column heights =10 km occur frequently, with periods of volcanic quiescence being statistically rare. Small-to-moderate-magnitude eruptions should therefore be included in climate model simulations, given the >50% chance of one or two eruptions to occur in any given year. Not all of these eruptions affect the stratospheric aerosol budget, but those that do increase the nonvolcanic background SAOD by ~0.004 on average, contributing ~50% to the total SAOD in the absence of large-magnitude eruptions. This equates to a volcanic ERF of about 0.10 W/m 2 , which is about two thirds of the ERF from ozone changes induced by ozone-depleting substances.

54 ENVIRONMENTAL SCIENCES↗

Radio Frequency Characteristics of Volcanic Lightning and Vent Discharges

In this study, we analyze the pulse width and spectral content of vent discharges and volcanic lightning flashes. We made measurements of electrical activity with a broadband very high frequency antenna (20–80 MHz) during an explosive eruption of Sakurajima volcano on November 8, 2019. The individual impulses that comprise vent discharges and volcanic lightning were analyzed to determine the fundamental width of the impulses and the rate of fall-off of their energy spectral density. The results show that vent discharges are more similar to volcanic lightning than they are different. Here, the mean pulse width for both vent discharges and volcanic lightning was 50 ns. Both types of electrical activity had similar spectral content; the average slope of the amplitude spectra was –3.4 for both. Further, examination of the pulse width and spectral slope distributions showed that while the distributions of volcanic lightning and vent discharges are statistically distinct from each other, the distribution of vent discharges is a subset of the distribution of volcanic lightning.

58 GEOSCIENCES↗

Characterization of Shocked Beryllium

Beryllium metal has many excellent structural properties in addition to its unique radiation characteristics, including: high elastic modulus, low Poisson's ratio, low density, and high melting point. However, it suffers from several major mechanical drawbacks: 1) high anisotropy - due to its hexagonal lattice structure and its susceptibility to crystallographic texturing; 2) susceptibility to impurity-induced fracture - due to grain boundary segregation; and 3) low intrinsic ductility at ambient temperatures thereby limiting fabricability. While large ductility results from deformation under the conditions of compression, the material can exhibit a brittle behavior under tension. Furthermore, there is a brittle to ductile transition at approximately 200 C under tensile conditions. While numerous studies have investigated the low-strain-rate constitutive response of beryllium, the combined influence of high strain rate and temperature on the mechanical behavior and microstructure of beryllium has received limited attention over the last 40 years. Prior studies have focused on tensile loading behavior, or limited conditions of dynamic strain rate and/or temperature. The beryllium used in this study was Grade S200-F (Brush Wellman, Inc., Elmore, OH) material. The work focused on high strain rate deformation and examine the validity of constitutive models in deformation rate regimes, including shock, the experiments were modeled using a Lagrangian hydrocode. Two constitutive strength (plasticity) models, the Preston-Tonks-Wallace (PTW) and Mechanical Threshold Stress (MTS) models, were calibrated using the same set of quasi-static and Hopkinson bar data taken at temperatures from 77K to 873K and strain rates from 0.001/sec to 4300/sec. In spite of being calibrated on the same data, the two models give noticeably different results when compared with the measured wave profiles. These high strain rate tests were conducted using both explosive drive and a gas gun to accelerate the material. Preliminary analysis of the results appears to indicate that, if fractured by the initial shock loading, the S200F Be remains sufficiently intact to support a shear stress following partial release and subsequent shock re-loading of the material. Additional 'arrested' drive shots were designed and tested to minimize the reflected tensile pulse in the sample. These tests were done to both validate the model and to put large shock induced compressive loads into the beryllium sample.

36 MATERIALS SCIENCE↗

Ionization and Expansion Dynamics of Atomic Clusters Irradiated with Short Intense VUV Pulses

Kinetic Boltzmann equations are used to model the ionization and expansion dynamics of xenon clusters irradiated with short intense VUV pulses. This unified model includes predominant interactions that contribute to the cluster dynamics induced by this radiation. The dependence of the evolution dynamics on cluster size, N{sub atoms} = 20-90000, and pulse fluence, F = 0.05-1.5 J/cm{sup 2}, corresponding to intensities in the range, 10{sup 12}-10{sup 14} W/cm{sup 2} and irradiation times, <=50 fs, is investigated. The predictions obtained with our model are found to be in good agreement with the experimental data. We find that during the exposure the cluster forms a shell structure consisting of a positively charged outer shell and a core of net charge equal to zero. The width of these shells depends on the cluster size. The charged outer shell is large within small clusters (N{sub atoms} 20, 70), and its Coulomb explosion drives the expansion of these clusters. Within the large clusters (N{sub atoms} = 2500, 90000) the neutral core is large, and after the Coulomb explosion of the outer shell it expands hydrodynamically. Highly charged ions within the core recombine efficiently with electrons. As a result, we observe a large fraction of neutral atoms created within the core, its magnitude depending on the cluster size. To our knowledge, our model is the first and only one that gives a full and quantitatively accurate description of all of the experimental data collected from irradiated atomic clusters at 100 nm photon wavelength.

74 ATOMIC AND MOLECULAR PHYSICS↗