Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “General Physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Stimulated Brillouin scattering of the beat wave of two lasers in a plasma

Stimulated Brillouin scattering of two collinear lasers in a plasma is investigated. Lasers exert a longitudinal ponderomotive force on electrons, imparting them oscillatory axial velocity at the beat frequency. This velocity acts as a driver for parametric excitation of an ion acoustic wave (omega,k-vector) and a noncollinear sideband electromagnetic wave (omega{sup '},k-vector{sup '}). The driver velocity v-vector{sub 0-} couples to the sideband wave to exert a ponderomotive force at (omega,k-vector) on the electrons, driving the ion acoustic wave. The density perturbation of ion acoustic wave beats with v-vector{sub 0-} to produce a nonlinear current at (omega{sup '},k-vector{sup '}), driving the sideband. In the case of finite spot size Gaussian laser beams, the beat wave has a Gaussian profile and excites an ion acoustic wave (omega,k-vector) and a backscattered TM mode (omega{sup '},k-vector{sub z}{sup '}). The growth rate scales as the product of amplitudes of the lasers and maximizes at optimum values of scattering angles. The parametric instability of difference frequency driver is stronger than the sum frequency driver.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Determination of plasma velocity from light fluctuations in a cutting torch

Measurements of plasma velocities in a 30 A high energy density cutting torch are reported. The velocity diagnostic is based on the analysis of the light fluctuations emitted by the arc which are assumed to propagate with the flow velocity. These light fluctuations originate from plasma temperature and plasma density fluctuations mainly due to hydrodynamic instabilities. Fast photodiodes are employed as the light sensors. The arc core velocity was obtained from spectrally filtered light fluctuations measurements using a band-pass filter to detect light emission fluctuations emitted only from the arc axis. Maximum plasma jet velocities of 5000 m s{sup -1} close to the nozzle exit and about 2000 m s{sup -1} close to the anode were found. The obtained velocity values are in good agreement with those values predicted by a numerical code for a similar torch to that employed in this work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Similarity theory of nonlinear cold pair-plasma dynamics

In this article the waves and dynamics of an inhomogeneous cold magnetized electron-positron plasma are investigated using similarity methods to study particular classes of plasma wave behavior. A cold two-fluid plasma model in a cylindrical geometry ({rho},{theta},z) and time t is assumed, but attention is restricted to ({rho},t) variations only. The application of similarity procedures reduces the set of partial differential equations which describe the spatial and temporal evolution of the plasma to a set of ordinary differential equations. This model has particular relevance to the description of the evolution of the electron-positron component of pulsar magnetospheres. Some typical solutions of these similarity equations are presented which characteristically have the property of blow-up phenomena.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Examination of laser-triggered discharge using a virtual gas model and the similarity of its Paschen curve with those of inert gases

We examined laser-triggered discharge (LTD) under asymmetric electric fields in air. Upon introducing a virtual gas with npd (n=2.8-3) instead of pd in Paschen's law [Ann. Phys. Chem. 37, 69 (1889)], the results of LTD in air coincided with the Paschen curve. A Paschen curve similar to those of inert gases, i.e., Ne and He, can be obtained even in air. This implies that in LTD, the number of gas molecules between electrodes appears to be n times higher than that in air. In LTD in air, the gamma effect is presumed to be significant, similar to in inert gases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical interferometric analysis of colliding laser produced air plasmas

Colliding air plasmas produced using 1064 nm Nd:YAG laser were analyzed using optical interferometry. For generating multiple air plasmas, the spherical aberrations of the focusing lens were used. The three-dimensional (3D) distributions of the electron density and the gas density behind shock wave front were investigated. The two-dimensional fast Fourier transform technique was used to extract the phase shift of the interferograms and a numerical inverse Abel transformation was applied to reconstruct the 3D distribution of the refractive index. Based on the Gladston-Dale relation, high resolution images of the 3D distributions of the electron density and the gas density were achieved. From the results, a stagnation layer was formed due to the collision of shock waves and the succeeding plasmas. The enhancements of electron density and gas density were observed in the collision zone. It shows that the collision region depends on the pulse energy. With smaller pulse energy, the thickness of the stagnation layer increased, while the enhancement of the gas density behind the shock wave front in the collision zone reduced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Production of planar-type overdense plasma with resonant excitation of surface plasmon polaritons

The present study presents a plasma source, capable of generating overdense plasma below the whole quartz plate while exciting surface plasmon polaritons (SPPs) by means of a subwavelength diffraction grating. The wavelength of surface wave, calculated on either the discharge image or the simulated electric field distribution graph, is about 5.7 cm, which approximates the theoretical value by a calculation of the SPP dispersion equation in overdense plasma. The operation mechanism of plasma heating is attributed to the resonant excitation of SPPs and its dissipation in plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Accurate control of ion bombardment in remote plasmas using pulse-shaped biasing

This paper deals with a pulsed biasing technique employed to a downstream expanding thermal plasma. Two pulsed biasing approaches are presented: asymmetric rectangular pulses and modulated pulses with a linear voltage slope during the pulse, and their applicability is discussed on the basis of the intrinsic capacitance of the processed substrate-layer system. The substrate voltage and current waveforms are measured, and the relation to the obtained ion energy distributions is discussed. Accurate control of the ion bombardment is demonstrated for both aforementioned cases, and the cause of broadening of the peaks in the ion energy spectra is determined as well. Moreover, several methods to determine the modulated pulse duration, such that the sloping voltage exactly compensates for the drop of the substrate sheath potential due to charging, are presented and their accuracy is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma parameters of an active cathode during relativistic magnetron operation

The results of time- and space-resolved spectroscopic studies of the plasma produced at the surface of the ferroelectric cathode during the operation of an S-band relativistic magnetron generating approx50 MW microwave power at f=3005 MHz and powered by a linear induction accelerator (LIA) (150 kV, 1.5 kA, 250 ns) are presented. The surface plasma was produced by a driving pulse (3 kV, 150 ns) prior to the application of the LIA accelerating high-voltage pulse. The cathode plasma electron density and temperature were obtained by analyzing hydrogen H{sub a}lpha and H{sub b}eta, and carbon ions CII and CIII spectral lines, and using the results of nonstationary collision radiative modeling. It was shown that the microwave generation causes an increase in plasma ion and electron temperature up to approx4 and approx7 eV, respectively, and the plasma density increases up to approx7x10{sup 14} cm{sup -3}. Estimates of the plasma transport parameters and its interaction with microwave radiation are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of gas pressure and applied voltage on Xe excimer radiation from a micro dielectric barrier discharge for plasma display panel

We present the influence of gas pressure and applied voltage on Xe excimer radiation from a microdielectric barrier discharge (micro-DBD) in Ne/Xe gas mixture for plasma display panel. Measurements show that the excimer radiation with the 172 nm band lines is strongly observed in the afterglow, and drastically increases with an increase in gas pressure and applied voltage. It is also found that for high gas pressure and low voltage, excimer molecule (Xe{sub 2}{sup *}) is efficiently produced because of less infrared emission from Xe excited atom. The reaction processes of Xe metastable atom (Xe{sub 1s5}{sup *}), which is a precursor for Xe{sub 2}{sup *}, are theoretically analyzed using a one-dimensional fluid model. Increasing gas pressure results in large excimer radiation due to the enhancement of the following three processes, i.e., the conversion process from Xe{sub 1s5}{sup *} to Xe{sub 2}{sup *}, the direct electron impact excitation from ground state to Xe{sub 1s5}{sup *}, and the collisional de-excitation process from upper level (Xe{sup **}) to Xe{sub 1s5}{sup *}. The simulation analytical result shows that for lower voltage, Xe{sub 1s5}{sup *} is efficiently produced due to the increase in the ratio of direct excitation to Xe{sub 1s5}{sup *} from ground state and the suppression of the stepwise ionization from Xe{sub 1s5}{sup *} by electron collisions. While for high voltage operation of micro-DBD, the recombination process with Xe molecular ion (Xe{sub 2}{sup +}) and electron contributes to the total excimer radiation, which can be responsible for the large excimer radiation observed in experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mechanical Properties of Clay Thin Plate as Pre‐Evaluation for Solid Oxide Fuel Cell Manufacture

Solid oxide fuel cell that produces a certain power density requires specific air pressures to be flowed within its membrane to ensure that certain electrons flow through its fuel cell membrane. Therefore, it is vital for a fuel cell membrane to sustain the pressure loading without any failures. This paper investigates the mechanical properties of clay thin plate as a preliminary evaluation of parameter processes used for solid oxide fuel cell manufacture. Several parameter processes that affect the mechanical properties such as compaction loading, sintering temperature, grain size and of the thin plate are of interest. The experiment uses the Vickers test to determine the hardness number. The experimental results are used as guidance in preparing the thin plate of solid oxide fuel cell.

36 MATERIALS SCIENCE↗

Molecular structure determination from x-ray scattering patterns of laser-aligned symmetric-top molecules.

We investigate the molecular structure information contained in the x-ray diffraction patterns of an ensemble of rigid CF{sub 3}Br molecules aligned by an intense laser pulse at finite rotational temperature. The diffraction patterns are calculated at an x-ray photon energy of 20 keV to probe molecular structure at angstrom-scale resolution. We find that a structural reconstruction algorithm based on iterative phase retrieval fails to extract a reliable structure. However, the high atomic number of Br compared with C or F allows each diffraction pattern to be treated as a hologram. Using this approach, the azimuthal projection of the molecular electron density about the alignment axis may be retrieved.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Characterization of a CO{sub 2}/N{sub 2}/Ar supersonic flowing discharge

In this paper we are presenting the full characterization of a supersonic flowing CO{sub 2}/N{sub 2}/Ar discharge at static pressures of 1-20 Torr and Mach number 2.15. In all aspects besides the flow speed and gas temperature, these conditions correspond to Martian entry plasma. Plasma parameters were determined by optical emission spectroscopy techniques. The gas and vibrational temperature were found from analysis of the rotational and vibrational spectra of the CO B {sup 1}SIGMA{sup +}-A {sup 1}PI Angstrom system, respectively. The electron density was determined from the absolute intensity of the N{sub 2}C {sup 3}PI{sub u}-B {sup 3}PI{sub g} second positive system. A kinetic model for the discharge was developed to calculate the electron density and compared with experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simple model analysis on the negative-ion extraction from a plasma

Extraction of negative hydrogen ions from a plasma is analyzed with a view to the description of the extraction region of the negative hydrogen ion-beam sources developed for additional heating of fusion plasmas. The numerical procedure introduced in the study is a modification of the indirect Poisson-Vlasov method. It uses a condition for the plasma meniscus and employs analogy with the particle-in-cell model simulation. The analysis of the results shows that the charged particle velocity distribution at the entrance of the extraction region influences the properties of the extracted beams and its effect should be considered when conditions for well converged beams are looked for through variation in the plasma density and in the potentials of the electrodes of the extraction system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of azimuthally asymmetric reactor components on a parallel plate capacitively coupled plasma

A three-dimensional fluid plasma model is used to investigate the impact of azimuthally asymmetric reactor components on spatial characteristics of parallel plate capacitively coupled plasmas. We consider three scenarios: high frequency (13.56 MHz) argon discharges with, separately, an off-axis circular plate surrounding the bottom electrode and an access port opening in the reactor sidewall, and a very high frequency (162 MHz) argon discharge with nonparallel electrodes. For the reactor with off-axis plate, both the Ar{sup +} density and flux are strongly perturbed toward the direction of maximum grounded surface area, with azimuthal variation in ion flux up to 10%. Perturbations in Ar{sup +} density due to the access port opening are localized to the region near the access port, and the impact on ion flux in the interelectrode region is minimal. Finally, the nonparallel electrodes result in a significant change in the location and shape of the Ar{sup +} density profile, going from a center-peaked discharge with parallel electrodes to a flattened off-center profile when tilted less than 1 deg. with a nominal 5 cm gap.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectroscopic investigation of wave driven microwave plasmas

Large H atom line broadening was found throughout the volume of surface wave generated He-H{sub 2} and H{sub 2} microwave plasmas at low pressures. The measured Doppler temperatures corresponding to the H{sub b}eta, H{sub g}amma, H{sub d}elta, H{sub e}psilon, and H{sub z}eta line profiles were found to be higher than the rotational temperature of the hydrogen molecular Fulcher-alpha band and the Doppler temperature of the 667.1 nm singlet He line. No excessive broadening has been found. The Lorentzian and Gaussian widths as determined by fitting the spectral lines with a Voigt profile increase with the principal quantum number of the upper level. In contrast, no such dependence for the Gaussian width has been observed in an Ar-H{sub 2} discharge. No population inversion has been observed from measurements of the relative intensities of transitions within the Balmer series.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical studies of powerful terahertz pulse generation from a super-radiant surface wave oscillator

The results of theoretical and numerical studies of coherent stimulated terahertz radiation from intense, subnanosecond electron beam are presented. The mechanism of terahertz pulse generation is associated with self-bunching of the beam and slippage of the wave over the whole electron flow. This so called Cherenkov super-radiance (SR) is used to propose a compact terahertz generator with high peak power. A large cross-section (overmoded), slow wave structure is designed to support the high power handling capability, and the mode competition is avoided by operating the device in the surface wave status. With 2.5 D particle-in-cell simulation, the 'hot' characteristics of the proposed super-radiant terahertz generator are investigated, and the numerical results show that the SR peak power could be further increased by optimizing the amplitude profile of electron pulse. Under the condition of 0.5 ns pulsewidth, 500 kV voltage, and 1.5 kA current, the 110 ps, 680 MW, and 0.14 THz SR pulse is achieved with a power efficiency of 90.67% in TM{sub 01} mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ab initio molecular dynamics simulation of photoisomerization in azobenzene in the n{pi}* state

Photoisomerization mechanism of azobenzene in the lowest excited state S{sub 1}(n{pi}*) is investigated by ab initio molecular dynamics (AIMD) simulation with the RATTLE algorithm, based on the state-averaged complete active space self-consistent field method. AIMD simulations show that cis to trans isomerization occurs via two-step rotation mechanism, accompanying rotations of the central NN part and two phenyl rings, and this process can be classified into two types, namely, clockwise and counterclockwise rotation pathways. On the other hand, trans to cis isomerization occurs via conventional rotation pathway where two phenyl rings rotate around the NN bond. The quantum yields are calculated to be 0.45 and 0.28{+-}0.14 for cis to trans and trans to cis photoisomerizations, respectively, which are in very good agreement with the corresponding experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature distributions of radio-frequency plasma in water by spectroscopic analysis

Distributions of emission intensity from radicals, electron temperature, and rotational temperature at a radio frequency of 27.12 MHz plasma in water are clarified by detailed spectroscopy measurement. Through this investigation, the following were observed. The points of maximum emission intensity of Halpha, Hbeta, O (777 nm), and O (845 nm) are almost the same, while that of OH shifts upward. The electron temperature decreases, while the rotational temperature increases with pressure. The distribution of the electron temperature changes at a threshold pressure, which is concerned with a change in the electron discharge mechanism. The self-bias of the electrode changes from a negative to positive at a threshold pressure. The point of the maximum rotational temperature of OH radicals shifts to approximately 1 mm above that for the maximum intensity of OH emission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗