Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GOLD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Sub-100 mA/cm 2 CO 2 -to-CO Reduction Current Densities in Hierarchical Porous Gold Electrocatalysts Made by Direct Ink Writing and Dealloying

While most research efforts on CO 2 -to-CO reduction electrocatalysts focus on boosting their selectivity, the reduction rate, directly proportional to the reduction current density, is another critical parameter to be considered in practical applications. This is because mass transport associated with the diffusion of reactant/product species becomes a major concern at a high reduction rate. Nanostructured Au is a promising CO 2 -to-CO reduction electrocatalyst for its very high selectivity. However, the CO 2 -to-CO reduction current density commonly achieved in conventional nanostructured Au electrocatalysts is relatively low (in the range of 1–10 mA/cm 2 ) for practical applications. In this work, we combine direct ink writing-based additive manufacturing and dealloying to design a robust hierarchical porous Au electrocatalyst to improve the mass transport and achieve high CO 2 -to-CO reduction current densities on the order of 64.9 mA/cm 2 with CO partial current density of 33.8 mA/cm 2 at 0.55 V overpotential using an H-cell configuration. Although the current density achieved in our robust hierarchical porous Au electrocatalyst is one order of magnitude higher than the one achieved in conventional nanostructured electrocatalysts, we found that the selectivity of our system is relatively low, namely 52%, which suggests that mass transport remains a critical issue despite the hierarchical porous architecture. We further show that the bulk dimension of our electrocatalyst is a critical parameter governing the interplay between selectivity and reduction rate. In conclusion, the insights gained in this work shed new light on the design of electrocatalysts toward scale-up CO 2 reduction and beyond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of Particle Size on the Vapor-Phase Oxidative Coupling of Methanol and Dimethylamine over Palladium–Gold Nanoparticles

Oxidative coupling of methanol and dimethylamine in the presence of O 2 in the vapor phase over dilute Pd in Au bimetallic catalysts occurs via the dissociation of O 2 on Pd and selective oxidation of methanol on Au. Here, we synthesize a series of silica-supported PdAu alloy nanoparticle catalysts of varied Pd:Au ratios with ~5 nm particle diameter and show that these catalysts have increased selectivity to dimethylformamide across all Pd:Au ratios (~95%), distinct from observations over larger PdAu nanoparticles (~15–25 nm diameter) of similar Pd:Au ratios. Small monometallic Pd particles are more selective than large monometallic Pd particles, and small Au nanoparticles are reactive and selective for oxidative coupling (while large Au nanoparticles are inactive). Rates per surface metal atom were similar over PdAu nanoparticles of all sizes and increased monotonically with increasing Pd content for the small nanoparticles. Further, apparent reaction kinetics demonstrate distinct apparent methanol reaction order and apparent activation energy relative to those reported over larger nanoparticles of similar Pd:Au ratios. Unlike larger PdAu nanoparticles, the rate of dimethylformamide formation is not promoted by cofed water over small PdAu nanoparticles. The results of the kinetic studies are used to propose a series of elementary steps, derive a plausible rate expression, and regress rate and equilibrium constants. These results suggest high coverages of surface methoxy species and low coverages of adsorbates derived from dimethylamine. Taken together, these results demonstrate the sensitivity of the rates, selectivities, and kinetics of oxidative coupling reactions to the size of bimetallic nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toward the Design of a Hierarchical Perovskite Support: Ultra-Sintering-Resistant Gold Nanocatalysts for CO Oxidation

We report that an ultrastable Au nanocatalyst based on a heterostructured perovskite support with high surface area and uniform LaFeO 3 nanocoatings was successfully synthesized and tested for CO oxidation. Strikingly, small Au nanoparticles (4–6 nm) are obtained after calcination in air at 700 °C and under reaction conditions. The designed Au catalyst not only possessed extreme sintering resistance but also showed high catalytic activity and stability because of the strong interfacial interaction between Au and the heterostructured perovskite support.

36 MATERIALS SCIENCE↗

Cetyltrimethylammonium Bromide/Chloride on Gold Nanocrystals Can Be Directly Replaced with Tri-Citrate

This work demonstrates an effective method for directly exchanging the toxic cetyltrimethylammonium bromide/chloride (CTAB/C) on Au nanocrystals with tri-citrate. Our experimental and computational studies indicate that counterion plays a vital role in the exchange process. Specifically, when citrate species bind to Au surface, they all evolve into tri-citrate with different counterions. In the case of three H + counterions, tri-citrate could readily replace the CTAB/C due to a strong binding of the carboxylate group with the Au surface. The substitution of H + counterion by Na + or K + weakens the binding strength and thus compromises the exchange. Additionally, our quantitative measurements and theoretical calculations indicate that Au nanospheres encased by high-index facets are advantageous over their counterparts enclosed by {111} and/or {100} facets for the exchange owing to the difference in binding strength. The mechanistic insights and experimental control should be extendable to other combinations of surface ligands and metal nanocrystals.

adsorption↗

Oxygen and CO adsorption on Au/SiO 2 catalysts prepared by magnetron sputtering: The role of gold subsurface

Temporal Analysis of Products (TAP) reactor system is used to investigate CO oxidation behavior on Au/SiO 2 catalysts prepared via the physical vapor deposition method magnetron sputtering. Au/SiO 2 catalysts are a valuable model system for studying the reactivity of Au nanoparticles, since the SiO 2 support plays little role in the reaction. The adsorption of CO on the catalyst was studied under TAP vacuum conditions and at different temperatures. The heat of CO adsorption estimated from TAP results by moment analysis is -23.9 kJ/mol which is high compared to heat of CO adsorption reported by other TAP groups studying Au/TiO 2 catalysts [29]. The reaction over the catalyst pretreated with oxygen under different pretreatment pressures (vacuum pressures to 33.66 psia) was studied under TAP vacuum conditions via CO titration. It was found that the amount of oxygen available on the surface for CO oxidation is proportional to the pretreatment pressure.

36 MATERIALS SCIENCE↗

Surface Plasmon Mediated Chemical Solution Deposition of Gold Nanoparticles on a Nanostructured Silver Surface

Utilizing intrinsic surface properties to direct and control nanostructure growth on a large-scale surface is fundamentally interesting and holds great technological promise. Reported here is a novel "bottom-up" approach to fabricating sub-15 nm Au nanoparticles on a nanostructured Ag surface via a liquid-phase chemical deposition by using localized surface plasmon resonance (SPR) excitation. A molecular thermometry strategy was employed to investigate the SPR-mediated photothermal heating of the Ag film on nanosphere (AgFON) substrate and measured the surface temperature to be above 230 °C, which led to an efficient decomposition of CH3AuPPh3 to form Au nanoparticles on the Ag surface. Particle sizes were tunable between 3 to 10 nm by adjusting the deposition time. Moreover, investigation of the deposition kinetics revealed that the Au nanoparticle deposition was surface-limited by the Ag substrate. This SPR-mediated chemical solution deposition (SPMCSD) strategy should be extendable to the deposition of many other materials for various applications.

Chemical↗

Gold, Copper, and Platinum Nanoparticles Dispersed on CeOx/TiO2(110) Surfaces: High Water-Gas Shift Activity and the Nature of the Mixed-Metal Oxide at the Nanometer Level

At small coverages of ceria on TiO{sub 2}(110), the CeO{sub x} nanoparticles have an unusual coordination mode. Scanning tunneling microscopy and density-functional calculations point to the presence of Ce{sub 2}O{sub 3} dimers, which form diagonal arrays that have specific orientations of 0, 24, and 42{sup o} with respect to the [1 -1 0] direction of the titania substrate. At high coverages of ceria on TiO{sub 2}(110), the surface exhibits two types of terraces. In one type, the morphology is not very different from that observed at low ceria coverage. However, in the second type of terrace, there is a compact array of ceria particles with structures that do not match the structures of CeO{sub 2}(111) or CeO{sub 2}(110). The titania substrate imposes on the ceria nanoparticles nontypical coordination modes, enhancing their chemical reactivity. This phenomenon leads to a larger dispersion of supported metal nanoparticles (M = Au, Cu, Pt) and makes possible the direct participation of the oxide in catalytic reactions. The M/CeO{sub x}/TiO{sub 2}(110) surfaces display an extremely high catalytic activity for the water-gas shift reaction that follows the sequence Au/CeO{sub x}/TiO{sub 2}(110) < Cu/CeO{sub x}/TiO{sub 2}(110) < Pt/CeO{sub x}/TiO{sub 2}(110). For low coverages of Cu and CeO{sub x}, Cu/CeO{sub x}/TiO{sub 2}(110) is 8-12 times more active than Cu(111) or Cu/ZnO industrial catalysts. In the M/CeO{sub x}/TiO{sub 2}(110) systems, there is a strong coupling of the chemical properties of the admetal and the mixed-metal oxide: The adsorption and dissociation of water probably take place on the oxide, CO adsorbs on the admetal nanoparticles, and all subsequent reaction steps occur at the oxide-admetal interface. The high catalytic activity of the M/CeO{sub x}/TiO{sub 2}(110) surfaces reflects the unique properties of the mixed-metal oxide at the nanometer level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Type-I CdS/ZnS Core/Shell Quantum Dot-Gold Heterostructural Nanocrystals for Enhanced Photocatalytic Hydrogen Generation

Developing Type-I core/shell quantum dots is of great importance toward fabricating stable and sustainable photocatalysts. However, the application of Type-I systems has been limited due to the strongly confined photogenerated charges by the energy barrier originating from the wide-bandgap shell material. In this project, we found that through the decoration of Au satellite-type domains on the surface of Type-I CdS/ZnS core/shell quantum dots, such an energy barrier can be effectively overcome and an over 400-fold enhancement of photocatalytic H(2) evolution rate was achieved compared to bare CdS/ZnS quantum dots. Transient absorption spectroscopic studies indicated that the charges can be effectively extracted and subsequently transferred to surrounding molecular substrates in a subpicosecond time scale in such hybrid nanocrystals. Based on density functional theory calculations, the ultrafast charge separation rates were ascribed to the formation of intermediate Au2S layer at the semiconductor-metal interface, which can successfully offset the energy confinement introduced by the ZnS shell. In conclusion, our findings not only provide insightful understandings on charge carrier dynamics in semiconductor-metal heterostructural materials but also pave the way for the future design of quantum dot-based hybrid photocatalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Luminescent Bimetallic Two-Coordinate Gold(I) Complexes Utilizing Janus Carbenes

A series of bimetallic carbene-metal-amide (cMa) complexes have been prepared with bridging biscarbene ligands to serve as a model for the design of luminescent materials with large oscillator strengths and small energy differences between the singlet and triplet states (ΔE ST ). The complexes have a general structure (R 2 N)Au(:carbene—carbene:)Au(NR 2 ). The bimetallic complexes show solvation-dependent absorption and emission that is analyzed in detail. It is found that the molar absorptivity of the bimetallic complexes is correlated with the energy barrier to rotation of the metal–ligand bond. The bimetallic cMa complexes also exhibit short emission lifetimes (τ = 200–300 ns) with high photoluminescence efficiencies (Φ PL > 95%). The radiative rates of bimetallic cMa complexes are 3–4 times faster than that of the corresponding monometallic complexes. Analysis of temperature-dependent luminescence data indicates that the lifetime for the singlet state (τS 1 ) of bimetallic cMa complexes is near 12 ns with a ΔE ST of 40–50 meV. Here the presented compounds provide a general design for cMa complexes to achieve small values for ΔE ST while retaining high radiative rates. Solution-processed organic light-emitting devices (OLEDs) made using two of the complexes as luminescent dopants show high efficiency and low roll-off at high luminance.

14 SOLAR ENERGY↗

Electrocatalytic Study of the Oxygen Reduction Reaction at Gold Nanoparticles in the Absence and Presence of Interactions with SnO x Supports

Here we report that density functional theory (DFT) can be used to accurately predict how Au nanoparticle (NP) catalysts cooperate with SnO x ( x = 1.9 or 2.0) supports to carry out the oxygen reduction reaction (ORR). Specifically, dendrimers were used to encapsulate AuNPs and prevent their interactions with the underlying SnO x supports. After removal of the dendrimers, however, the AuNPs are brought into direct contact with the support and hence feel its effect. The results show that both SnO 1.9 and SnO 2.0 supports strongly enhance the electrocatalytic properties of AuNPs for the ORR. In the case of AuNP interaction with a SnO 1.9 support, the number of electrons involved in the ORR ( n eff ) increases from 2.1 ± 0.2 to 2.9 ± 0.1 following removal of the dendrimers, indicating an increased preference for the desired four-electron product (water), while the overpotential decreases by 0.32 V. Similarly, direct interactions between AuNPs and a SnO 2.0 support result in an increase in n eff from 2.2 ± 0.1 to 3.1 ± 0.1 and a reduction of the overpotential by 0.28 V. These experimental results are in excellent agreement with the theoretically predicted onset potential shift of 0.30 V. According to the DFT calculations, the observed activity enhancements are attributed to the existence of anionic Au resulting from electron transfer from surface oxygen vacancies within the SnO x supports to the AuNPs. This theoretical finding was confirmed experimentally using X-ray photoelectron spectroscopy. Importantly, the calculations reported here were performed prior to the experiments. Furthermore, this study represents an unusual case of theory accurately predicting the electrocatalytic manifestation of strong metal support interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗