Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GET”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Charged dust in the outer planetary magnetospheres. III - Satellite impact geometries

Interplanetary dust grains entering the Jovian plasmasphere become charged, and those in a certain size range get magneto-gravitationally trapped in the corotating plasmasphere. The trajectories of such dust grains intersect the orbits of one or more of the Galilean satellites. Orbital calculations of micron sized dust grains show that they impact the outermost satellite Callisto predominantly on its leading face, while they impact the inner three - Io, Europa and Ganymede - predominantly on the trailing face. These results are offered as an explanation of the observed brightness asymmetry between the leading and trailing faces of the outer three Galilean satellites. The albedo of Io is likely to be determined by its volcanism.

Hill, J. R.↗
NASA NTRS1982

GAS Verification Payload - From concept through flight

The GAS Verification Payload (GVP), successfully flown on STS-3, was the forerunner of the Get Away Special class of payloads. Intended to provide GAS experiments with flight environmental information, it also served to shape out the GAS support systems and establish areas of programmatic understanding between the GSFC, JSC, and KSC. Originally envisaged as using a sounding rocket build-it, test-it, fly-it approach with minimum paperwork, this naivete dissipated when faced with the manned space flight world of JSC. What evolved was an understanding by both disciplines that safety and reliability could be achieved at lower cost without compromise.

Hudgins, J. I.↗
NASA NTRS1982

Small payloads for the Shuttle

The Goddard Space Flight Center, Special Payloads Division (sounding rockets) experience in applying rocket mechanical experience and technology to the Shuttle is presented. While the mechanical design loads are similar, new considerations for thermal extremes, material control and attachment structures must be included. These additional requirements have been successfully introduced in the free flyer class of payloads, Shuttle Pointed Automonous Research Tool for Astronomy (SPARTAN), and a motorized door for the Get Away Special (GAS) payloads.

Nygaard, M. A.↗
NASA NTRS1982

Automatic thermal control switches

Two automatic, flexible connection thermal control switches have been designed and tested in a thermal vacuum facility and in the Get Away Special (GAS) container flown on the third Shuttle flight. The switches are complementary in that one switch passes heat when the plate on which it is mounted exceeds some selected temperature and the other switch will pass heat only when the mounting plate temperature is below the selected value. Both switches are driven and controlled by phase-change capsule motors and require no other power source or thermal sensors.

Wing, L. D.↗
NASA NTRS1982

Familiarization with LANDSAT imagery

Learning objectives of the activities provided include: (1) reading the annotation of a LANDSAT image; (2) becoming acquainted with the characteristics of 1:1,000,000 scale transparencies and prints of MSS images; (3) noting the general information visible in LANDSAT photo products; (4) observing changes of appearance of any ground feature or class in the black and white images made from the four MSS bands and the characteristic color of each class in color composites; (5) determining the degree to which a LANDSAT image meets map accuracy standards and can be fitted to map projections; (6) assessing the effects of LANDSAT enlargements and scale changes and of the limitations of satellite resolution relative to aerial photos; (7) observing the influence of time of acquisition (season) on a scene; (8) getting a feel for image quality as dependent on processing and photoreproduction; (9) appreciating the characteristics of the RBV and thermal band imagery obtained from LANDSAT-3; and (10) becoming familiar with certain attributes of adjacent LANDSAT images which permit them to be joined in mosaics and to be viewed in stereo.

Source record↗
NASA NTRS1982

Recent tests on the Carter small reciprocating steam engines

The Jay Carter Enterprises (JCE) Paratransit Vehicle steam engine was tested over a range of conditions which might be experienced by the power converter subsystem of the Small Community Solar Thermal Power Experiment. Some difficulties were encountered getting the engine ready for testing. These difficulties were related to the five year dormancy of the entire system and to incomplete development work that had been going on at the time of cessation of steam engine work at JCE. Other difficulties were related to the fact that the particular expander being tested never ran before and possessed some manufacturing defects. Nevertheless, the engine was operated successfully and results of testing do verify results of computer simulations of the engine in regard to the effect of temperature and power level variations. Engine efficiency was good but generally lower than expected and performance dropped as testing continued. The effect of change in expansion ratio was not demonstrated because of deterioration in engine performance. Post-test inspection revealed numerous correctable defects.

Kiceniuk, T.↗
NASA NTRS1982

Tenth NASTRAN User's Colloquium

The development of the NASTRAN computer program, a general purpose finite element computer code for structural analysis, was discussed. The application and development of NASTRAN is presented in the following topics: improvements and enhancements; developments of pre and postprocessors; interactive review system; the use of harmonic expansions in magnetic field problems; improving a dynamic model with test data using Linwood; solution of axisymmetric fluid structure interaction problems; large displacements and stability analysis of nonlinear propeller structures; prediction of bead area contact load at the tire wheel interface; elastic plastic analysis of an overloaded breech ring; finite element solution of torsion and other 2-D Poisson equations; new capability for elastic aircraft airloads; usage of substructuring analysis in the get away special program; solving symmetric structures with nonsymmetric loads; evaluation and reduction of errors induced by Guyan transformation.

Source record↗
NASA NTRS1982

An experimental investigation of internal area ruling for transonic and supersonic channel flow

A simulated transonic rotor channel model was examined experimentally to verify the flow physics of internal area ruling. Pressure measurements were performed in the high speed wind tunnel at transonic speeds with Mach 1.5 and Mach 2 nozzle blocks to get an indication of the approximate shock losses. The results showed a reduction in losses due to internal area ruling with the Mach 1.5 nozzle blocks. The reduction in total loss coefficient was of the order of 17 percent for a high blockage model and 7 percent for a cut-down model.

Roberts, W. B.↗
NASA NTRS1982

Improved downlink frequency calculations for Voyager 2

Voyager 2 and her sister Voyager 1 were launched, respectively, in August and September 1977. The object of these spacecraft was to conduct exploratory investigations of the Jupiter and Saturn planetary systems and the interplanetary medium between Earth and Saturn. In April 1978 the Voyager 2 redundant receiver and the loop capacitor in the prime spacecraft receiver failed, leaving the Voyager Project with a major problem: how to communicate with the spacecraft and get the data back.

Ricardo, A. L.↗
NASA NTRS1982

Experimental and analytical determination of gear tooth temperatures with oil jet lubrication

Gear tooth average and instantaneous surface temperatures were measured with a fast response infrared radiometric microscope, while operating at arious speeds, loads and oil jet pressures. Increased oil jet pressure had a significant effect on both average and peak surface temperatures at all test conditions, increasing the speed at constant load and increasing the load at constant speed causes a significant rise in average and peak surface temperatures of gear teeth. A gear tooth temperature analysis was conducted by a finite element method combined with a calculated heat input and oil jet impingment depth with estimated heat transfer coefficients based on the experimental data. It is concluded that oil jet pressures required for adequate cooling at high load and speed conditions must be high enough to get full penetration depth of the teeth.

Townsend, D. P.↗
NASA NTRS1983

Feasibilty analyses of electroepitaxial research and development accomodations. Volume 1: Accommodations assessment

A preliminary assessment of the feasibility of accommodating the on-orbit R&D requirements for electroepitaxial crystal growth using the Orbiter middeck, the Materials Experiment Assembly or the Get-Away Special cans was performed. The study is based on the proposed electroepitaxial growth of single crystals of gallium arsenide (GaAs). Baseline R&D requirements, synthesizing furnace and facility conceptual design requirements, accommodation requirements, preliminary compatibility assessments are established. The systems engineering approach employed for the individual assessments is outlined.

Source record↗
NASA NTRS1981

Chromospheric and coronal heating mechanisms

Dissipation mechanisms in the chromosphere were examined. The problem of a heat flux from a cool region of the star to a hot region of the star, which violates our second law of thermodynamics is discussed. It is suggested that this is caused by a nonthermal energy flux. While convection transports the thermal flux, a very small percentage is converted into a nonthermal flux. The major part of the outgoing convective energy is turned back into the radiation field which gets decoupled from the star when the star becomes transparent and the radiant energy escapes to space. The small nonthermal flux is transmitted upwards and becomes the dominant energy flux still coupled to the star. The importance of recycling of energy via advection and conduction is emphasized.

Leibacher, J.↗
NASA NTRS1982

The relationship of sensor parameters to applications data analysis

A stochastic model for the data acquisition system in a multispectral scanner system, like the one utilized by the LANDSAT satellites, is presented. A list of noise sources which are known or presumed to have a significant effect in the information extraction process was constructed. Since the shot noise introduced by the photodetectors in the sensor system is signal level dependent, an atmospheric model was adopted which could adequately describe the amount of radiation that gets into the sensors based on the atmospheric transmittance. An analysis was carried out to find the output spectral statistics in terms of the input signal statistics and the system parameters. This was integrated into a set of FORTRAN programs that when supplied with, the class statistics, the noise levels introduced by the sensor system, the atmospheric transmittance, and the atmospheric path radiance, can be used to estimate the classification performance. In order to show the beneficts of this model a series of runs were performed in which the Thematic Mapper multispectral scanner was the system under consideration.

Landgrebe, D. A.↗
NASA NTRS1983

Should we make products on the moon?

It is pointed out that products from extraterrestrial materials can play a major role in future space operations within the useful lifetime of the first major space station, now in the planning stage. Possible economic advantages regarding the use of such products could be related to the recognition that it takes seven times more energy to get one kilogram from the earth's surface to low earth orbit (LEO) than it does to move one kilogram from the moon's surface to LEO. An analysis regarding the margin of advantage of extraterrestrial materials as been conducted, taking into account equipment and supplies which ust be launched from earth to make the acquisition of extraterrestrial products feasible. The present investigation is concerned with a study of engineering practicality. Attention is given to the transport of processing equipment from LEO to the lunar surface and of lunar products to LEO and the geosynchronous orbit. It is found that lunar oxygen and radiation shielding could possibly be utilized by the turn of the century.

Carroll, W. F.↗
NASA NTRS1983

Advances in systems for interactive processing and display of meteorological data

Advances in systems for interactive processing and display of meteorological data are reviewed, with particular attention given to developments in hardware and software, meteorological data base, analysis and display, and systems availability. These developments include inexpensive minicomputers which give the user almost instantaneous results for many types of jobs; image terminals with the capability to enhance, quantify, animate, and compare image and graphical data; accessibility of a large meteorological data base and the capability of merging different types of data; and sophisticated analysis and multidimensional display techniques. Critical problems still to be solved include getting quick access to historical and real time data bases from any system and making it easy to transport software from one system to another.

Hasler, A. F.↗
NASA NTRS1983

The inner edge of Saturn's B ring

The sharp, 90-km wide transition from an optical depth of 0.2 in the C ring to 1 in the B ring begins at 91,970 km from Saturn's center. This radius is found to be almost exactly at the inward stability limit of charged particles launched in the ring plane at the local Kepler velocity, provided these particles have large charge to mass ratio. The zonal harmonic models of Saturn's magnetic field from the Voyager data and the gravitational field model from Pioneer data are essential to get the very close agreement between theory and observation. The theoretical stability limits are 91,973 + or - 145 km from Voyager 1 magnetic field data and 91,991 + or 145 km from Voyager 2 magnetic data. The zonal harmonic magnetic field lines are not perpendicular to the ring plane. Therefore, in addition to the magnetic mirror, gravitational, and centrifugal forces, an unknown force must be postulated to produce equilibrium in the ring plane and make the stability calculation meaningful.

Northrop, T. G.↗
NASA NTRS1983

Birth of space plant growing

The attempts, and successes, to grow plants in space, and get them to fully develop, bloom and produce seeds using orchids are presented. The psychological advantages of the presence of plants onboard space vehicles and space stations is indicated.

Mashinskiy, A.↗
NASA NTRS1984

Communications

Communications in any system is one of the last technologies to be considered, and sometimes it is considered too late to impact the system. This was somewhat the impression on reviewing the NASA budget for two mission scenarios for the space station. However, that budget fortunately was well spent, and the money was spent to get the most benefit per dollar. Another thing that is very often forgotten is that technology is not produced in a vacuum. In fact, in conducting independent research and development (IR&D), the first phase is to define the requirements which must be time phased, becuase very often the conditions will change during the life of the system. From the requirements, a set of architectures that are at least representative of that era are produced. If the exact requirements were not established, at least boundaries are set on the requirements for that architecture. When this is completed, then the technology that is really needed is defined. The major criticism of the work that was presented to the panel is the lack of a firm set of requirements.

Bonelle, G. J.↗