Finite element modeling studies in the normal mode method and normal mode synthesis
Comparison of finite element and analytic solutions of normal uniform beam modes under various end conditions
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Comparison of finite element and analytic solutions of normal uniform beam modes under various end conditions
Hybrid coordinate equations of motion for finite element model of dynamic analysis on flexible appendage attached to rigid base
A new type of finite element is introduced which embodies the inverse square root singularity of the stress distribution arising near a crack in an elastic medium. Using this element near the crack tip in two typical cracked configurations, stress intensity factors within 5% of accepted values were obtained, with meshes having as few as 250 degrees of freedom.
The Method of Weighted Residuals (MWR) and the Finite Element Method (FEM) are considered as computational schemes in the problem of acoustic transmission in nonuniform ducts. MWR is presented in an improved form which includes the interaction of acoustic modes (irrotational) and hydrodynamic modes (rotational). FEM is based on a weighted residuals formulation using eight noded isoparametric elements. Both are applicable to two-dimensional and axially symmetric problems. Calculations are made for several sample problems to demonstrate accuracy and relative efficiency. One test case has implications in the phenomenon of subsonic acoustic choking and it is found that a large transmission loss is not an automatic consequence of propagation against a high subsonic mean flow.
A study of accuracy and convergence of linear functional finite element solution to linear parabolic and hyperbolic partial differential equations is presented. A variable-implicit integration procedure is employed for the resultant system of ordinary differential equations. Accuracy and convergence is compared for the consistent and two lumped assembly procedures for the identified initial-value matrix structure. Truncation error estimation is accomplished using Richardson extrapolation.
The NASTRAN finite element model of the MSFC/hybrid deployable truss is approximated by a model consisting of four bodies serially connected by a spring hinge suspension. The truss is decomposed into four serially connected modules determining the total mass and rotational inertias for a rigid body with its mass center on the axis of the truss for each module. A five-body cantilever truss model is developed along with an undamped form of this model. Spring coefficient values are generated to match eigenvalues of the latter model with those of the NASTRAN model. Damping coefficients are then determined that provide n percent of critical damping for the model.
The general purpose Finite Element Program COSMIC NASTRAN currently has the ability to model magnetic circuits with constant permeablilities. An approach was developed which, through small modifications to the program, allows modelling of non-linear magnetic devices including soft magnetic materials, permanent magnets and coils. Use of the NASTRAN code resulted in output which can be used for subsequent mechanical analysis using a variation of the same computer model. Test problems were found to produce theoretically verifiable results.
A system identification technique is developed for classes of distributed systems using finite element approximations. Vibrating systems represented by partial differential equations have physical parameters associated with mass, stiffness, and damping distributions which need to be known in order to properly control and design mathematical models of the system. In order to identify these parameters a weighted least-squares algorithm and modified Newton-Raphson method is used for the identification process. The theory and technique is demonstrated by estimating the system parameters of a vibrating cantilever beam made up of several different structural properties.
ANISAP is a 3-D finite element FORTRAN 77 computer code for linear elastic, small strain, analysis of laminated composites with arbitrary geometry including free edges and holes. Individual layers may be isotropic or transversely isotropic in material principal coordinates; individual layers may be rotated off-axis about a global z-axis. The laminate may be a hybrid. Three different isoparametric elements, variable order of gaussian integration, calculation of stresses at element boundaries, and loading by either nodal displacement of forces are included in the program capability. Post processing capability includes failure analysis using the tensor polynominal failure criterion.
DYCAST is a nonlinear structural dynamic finite element computer code developed for crash simulation. The element library contains stringers, beams, membrane skin triangles, plate bending triangles and spring elements. Changing stiffnesses in the structure are accounted for by plasticity and very large deflections. Material nonlinearities are accommodated by one of three options: elastic-perfectly plastic, elastic-linear hardening plastic, or elastic-nonlinear hardening plastic of the Ramberg-Osgood type. Geometric nonlinearities are handled in an updated Lagrangian formulation by reforming the structure into its deformed shape after small time increments while accumulating deformations, strains, and forces. The nonlinearities due to combined loadings are maintained, and stiffness variation due to structural failures are computed. Numerical time integrators available are fixed-step central difference, modified Adams, Newmark-beta, and Wilson-theta. The last three have a variable time step capability, which is controlled internally by a solution convergence error measure. Other features include: multiple time-load history tables to subject the structure to time dependent loading; gravity loading; initial pitch, roll, yaw, and translation of the structural model with respect to the global system; a bandwidth optimizer as a pre-processor; and deformed plots and graphics as post-processors.
Recent progress in the development of finite element methodology for the prediction of aerothermal loads is described. Three dimensional, inviscid computations are presented, but emphasis is placed on development of an approach extendable to three dimensional viscous flows. Progress in key research areas is described. Initial 30 results from the computational procedure are described.
Methods were developed for parallel processing of finite element solutions of large truss structures. The parallel processing techniques were implemented in two stages, i.e., the repeated forming of the nonlinear global stiffness matrix and the solving of the global system of equations. The Sequent Balance 21000 parallel computer was employed to demonstrate the procedures and the speed-up.
A fiber pushthrough process was computationally simulated using three-dimensional finite element method. The interface material is replaced by an anisotropic material with greatly reduced shear modulus in order to simulate the fiber pushthrough process using a linear analysis. Such a procedure is easily implemented and is computationally very effective. It can be used to predict fiber pushthrough load for a composite system at any temperature. The average interface shear strength obtained from pushthrough load can easily be separated into its two components: one that comes from frictional stresses and the other that comes from chemical adhesion between fiber and the matrix and mechanical interlocking that develops due to shrinkage of the composite because of phase change during the processing. Step-by-step procedures are described to perform the computational simulation, to establish bounds on interfacial bond strength and to interpret interfacial bond quality.
A two-step Taylor-Galerkin finite element method with Lapidus' artificial viscosity scheme is applied to several test cases for internal compressible inviscid flow problems. Investigations for the effect of supersonic/subsonic inlet and outlet boundary conditions on computational results are particularly emphasized.
The applicants have developed a finite element based approach for the solution of three-dimensional compressible flows. The procedure enables flow solutions to be obtained on tetrahedral discretizations of computational domains of complex form. A further development was the incorporation of a solution adaptive mesh strategy in which the adaptivity is achieved by complete remeshing of the solution domain. During the previous year, the applicants were working with the Advanced Aerodynamics Concepts Branch at NASA Ames Research Center with an implementation of the basic meshing and solution procedure. The objective of the work to be performed over this twelve month period was the transfer of the adaptive mesh technology and also the undertaking of basic research into alternative flow algorithms for the Euler equations on unstructured meshes.
A finite element approach is developed for a complex panel with fluid-conveying pipes undergoing large deflections subjected to random loadings. The influence of fluid velocity on the random response is investigated. The root-mean-square (rms) deflections and frequencies for different sound spectrum level value are studied. All four edges of the panel are considered to have the same conditions and restrictions. Either simply supported of clamped boundary condition with respect to the transverse deflection of the panel is considered. The prediction of fatigue life is then based on obtained rms stress. This analytical investigation will help to broaden the basic understanding of the role of fluid flow within structures subjected to acoustic loading.
A fiber pushthrough process was computationally simulated using three-dimensional finite element method. The interface material is replaced by an anisotropic material with greatly reduced shear modulus in order to simulate the fiber pushthrough process using a linear analysis. Such a procedure is easily implemented and is computational very effective. It can be used to predict fiber pushthrough load for a composite system at any temperature. The average interface shear strength obtained from pushthrough load can easily be separated into its two components: one that comes from frictioal stresses and the other that comes from chemical adhesion between fiber and the matrix and mechanical interlocking that develops due to shrinkage of the composite because of phase change during the processing. Step-by-step procedures are described to perform the computational simulation, to establish bounds on interfacial bond strength and to interpret interfacial bond quality.
An essentially non-oscillatory reconstruction for functions defined on finite-element type meshes was designed. Two related problems are studied: the interpolation of possibly unsmooth multivariate functions on arbitrary meshes and the reconstruction of a function from its average in the control volumes surrounding the nodes of the mesh. Concerning the first problem, we have studied the behavior of the highest coefficients of the Lagrange interpolation function which may admit discontinuities of locally regular curves. This enables us to choose the best stencil for the interpolation. The choice of the smallest possible number of stencils is addressed. Concerning the reconstruction problem, because of the very nature of the mesh, the only method that may work is the so called reconstruction via deconvolution method. Unfortunately, it is well suited only for regular meshes as we show, but we also show how to overcome this difficulty. The global method has the expected order of accuracy but is conservative up to a high order quadrature formula only. Some numerical examples are given which demonstrate the efficiency of the method.