SEARCH · Engineering Papers

Results for “Field stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

All sources NASA NTRS DOE OSTI

NASA NTRS2023

X-59 Sonic Boom Test Results from the NASA Glenn 8- by 6-Foot Supersonic Wind Tunnel

A wind tunnel test was conducted to investigate near-field sonic boom pressure signatures of the X-59 Low-Boom Flight Demonstrator aircraft. A 1.62%-scale model of the aircraft was fabricated for the wind tunnel test, which took place in the NASA Glenn 8- by 6-Foot Supersonic Wind Tunnel in September and October 2021. The model had provisions for being mounted by a swept blade strut that attached at top of model ahead of the inlet, or by a rear-entry sting that held the model at the location of the nacelle. The model had alternate parts for ±0.5° deflections of the flaps, ailerons, and stabilator, and ±1° deflections of the T-tail. Off-body static pressure measurements of the flow field below the model were made on a pressure rail which had 420 orifices along its tip. The model was positioned at various heights from the rail by vertical movement of the tunnel strut, and at various longitudinal stations relative to the rail by means of a linear actuator mounted between the wind tunnel strut and the balance. Spatial averaging of model pressure signatures acquired over a range of longitudinal positions reduced the effects of tunnel flow distortions and the interference of the rail flow field and shocks on the model pressure signatures. The test was run at approximate Mach numbers of 1.36, 1.4, and 1.47, and the model was set at various angles of attack and roll relative to the rail. Plots of the model signatures for representative variations of Mach number, model angles, control deflections, and height relative to the rail are provided throughout the report. Repeatability was generally very good and gave confidence in the quality of the measurements. The signatures measured at various heights from the rail provided insight into the aging of the model shocks as they propagated from 1.2 to 3 body lengths from the model. Off-track signatures up to 45° from centerline obtained by rolling the model gave indications of the shock flow fields across the width of the sonic boom carpet. The deflections of the various control surfaces allowed assessment of the boom sensitivity to the control surface movements.

Sonic boom↗

NASA NTRS2023

X-59 Sonic Boom Test Results from the NASA Glenn 8- by 6-Foot Supersonic Wind Tunnel

Sonic boom↗

NASA NTRS1987

The existence and stability of steady circulations in a conditionally symmetrically unstable basic flow

The existence of steady, nonlinear circulations in a flow susceptible to conditionally symmetric instability is studied, treating the latent heating as an energy source which is implicitly related to the motion field. The viscous nonlinear circulations of symmetrical instability are briefly discussed, and an existence theorem for steady, nonlinear symmetric circulations with bounded rates of latent heat release is given. The uniqueness and stability of these circulations are discussed, and some physical interpretations are given.

Xu, Qin↗

DOE OSTI2026

A robust framework for frictional fault contact in geological formations using a stabilized augmented Lagrangian approach

Numerical simulations are essential to evaluate the performance and safety of engineered subsurface systems such as geological carbon storage sites, enhanced geothermal fields, and oil and gas reservoirs. A key challenge lies in accurately modeling the frictional contact behavior along fault surfaces. This problem involves inequality constraints that arise from the physics of frictional slip, requiring specialized numerical methods to handle the resulting highly nonlinear and path-dependent behavior. Here, in this work, we address this challenge using an Augmented Lagrangian Method (ALM) implemented via the Uzawa algorithm. The formulation employs mixed finite element spaces, combining low-order piecewise linear displacements within the 3D domain cells with piecewise constant tractions defined on the fault surfaces. Furthermore, to ensure stability and satisfy the inf-sup condition, the discrete displacement space is enriched with face bubble functions on both sides of the contact interfaces. This approach offers several advantages over other stabilization techniques that rely on additional terms, and it integrates naturally in the Uzawa framework.

58 GEOSCIENCES↗

NASA NTRS2007

Bifurcation and Hysteresis of the Magnetospheric Structure with a varying Southward IMF: Field Topology and Global Three-dimensional Full Particle Simulations

Using a three-dimensional full electromagnetic particle model (EMPM), we have performed global simulations of the interaction between the solar wind and the terrestrial magnetosphere, and have investigated its asymptotic stability. The distance between the dayside magnetopause subsolar point and the Earth center, R(sub mp) is measured, as the intensity of southward IMF |B(sub z)| is slowly varying. Based on the field topology theory, one analyzes the variation of R(sub mp) as a reference index of the dynamics of this interaction, when IMF |B(sub z)| successively increases and decreases to its original value. Two striking results are observed. First, as the IMF |B(sub z)| increases above a critical value, the variation of R(sub mp) suddenly changes (so called 'bifurcation' process in field topology). Above this critical value, the overall magnetic field topology changes drastically and is identified as being the signature of magnetic reconnection at the subsolar point on the magnetopause. Second, this subsolar point recovers its original location R(sub mp) by following different paths as the IMF |B(sub z)| value increases (from zero to a maximum fixed value) and decreases (from this maximum to zero) passing through some critical values. These different paths are the signature of 'hysteresis' effect, and are characteristic of the so-called 'subcritical-type' bifurcation. This hysteresis signature indicates that dissipation processes take place via an energy transfer from the solar wind to the magnetosphere by some irreversible way, which leads to a drastic change in the magnetospheric field topology. This hysteresis is interpreted herein as a consequence of the magnetic reconnection taking place at the dayside magnetopause. The field topology reveals to be a very powerful tool to analyze the signatures of three-dimensional magnetic reconnection without the obligation for determining the mechanisms responsible for, and the consequences of the reconnection on the overall magnetospheric dynamics.

Cai, DongSheng↗

NASA NTRS1976

Unsteady aerodynamic flow field analysis of the space shuttle configuration. Part 2: Launch vehicle aeroelastic analysis

An exploratory analysis has been made of the aeroelastic stability of the Space Shuttle Launch Configuration, with the objective of defining critical flow phenomena with adverse aeroelastic effects and developing simple analytic means of describing the time-dependent flow-interference effects so that they can be incorporated into a computer program to predict the aeroelastic stability of all free-free modes of the shuttle launch configuration. Three critical flow phenomana have been identified: (1) discontinuous jump of orbiter wing shock, (2) inlet flow between orbiter and booster, and (3) H.O. tank base flow. All involve highly nonlinear and often discontinuous aerodynamics which cause limit cycle oscillations of certain critical modes. Given the appropriate static data, the dynamic effects of the wing shock jump and the HO tank bulbous base effect can be analyzed using the developed quasi-steady techniques. However, further analytic and experimental efforts are required before the dynamic effects of the inlet flow phenomenon can be predicted for the shuttle launch configuration.

Reding, J. P.↗

DOE OSTI2024

Designing metal halide perovskite solar modules for thermomechanical reliability

There is a significant deficiency in perovskite solar module (PSM) stability under thermomechanical stressors which is not well-understood. In this perspective, common issues seen with perovskite solar cell device fabrication related to thermomechanical reliability of PSM processing are discussed, with a focus on how the robustness of device layers and interlayer adhesion can be improved. Film stresses, adhesion of charge transport layers, and instability under light and heat are discussed with the purpose of providing insight on designing PSMs for durability. Processing conditions of encapsulation of PSMs and critical parameters to consider are also examined, and accelerated testing protocols for PSMs are discussed that probe mechanical degradation modes and ensure reliability of devices in the field.

14 SOLAR ENERGY↗

NASA NTRS1989

The stability of a compressible stratified shear layer

The stability of a shear layer under the effect of gravity is investigated using the compressible magnetohydrodynamic (MHD) equations, including an effective gravity term to represent the curvature effects of the flow and magnetic field line geometry. A general eigenmode equation is derived for a two-dimensional MHD fluid, and an energy-principle analysis to explain the effect of compressibility on the critical Richardson number is presented. For the case of a hyperbolic tangent shear flow and exponential density profile, it was found that, in the Boussinesq approximation, the compressibility raises the critical Richardson number from 1/4 to as much as 1/2, with the exact value depending on the value of the magnetic field at infinity. Under approximation of a strong asymptotic magnetic field, without invoking the Boussinesq approximation, it is shown both analytically and numerically that the density gradient terms cause the shear instability to be dispersive. The long-wavelength stability boundary for the Richardson number J = 0 is characterized by a normalized phase velocity c =

Wang, Z.↗

DOE OSTI2021

Electric and magnetic black holes in a new nonlinear electrodynamics model

Highlights: • We introduce a new NED model which is comparable with the BI model in the weak-field limit. • We find an electric black hole solution in the context of Einstein’s gravity minimally coupled with the new NED model. • We study the thermal stability of the electric black hole solution. • Modified Smarr’s formula consistent with the first law of black hole thermodynamics is obtained. A new nonlinear electrodynamics (NED) model is introduced in the form of a nonpolynomial Lagrangian which admits static spherical and also plane wave solutions in a flat space. Upon coupling with gravity the electric field is finite and comparable with the Born–Infeld counterpart. The electric and magnetic black hole solutions in the Einstein’s gravity coupled with this NED model are presented. The solutions give both asymptotically and in the weak field limit Reissner–Nordström (RN) black hole and unlike the other known models our electric solution is expressed in terms of elementary functions in a closed form. We study the first law and derive the modified Smarr’s formula for the electric type extension of our model. Considerable rich structure, especially thermodynamic ones, ranging from first to the second order phase transitions are added to the RN black hole of linear electrodynamics with this NED model. Having the exact solution for the metric function at our disposal we investigate the stability of the electric black hole from both the thermodynamical and causal points of view.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS1985

On the numerical computation of nonlinear force-free magnetic fields

An algorithm has been developed to extrapolate nonlinear force-free magnetic fields from a source surface, given the proper boundary conditions. The results of this work; describing the mathematical formalism that was developed, the numerical techniques employed, and the stability criteria developed for these numerical schemes are presented. An analytical solution is used for a test case; the results show that the computational accuracy for the case of a nonlinear force-free magnetic field was on the order of a few percent ( 5%).

Wu, S. T.↗

DOE OSTI2026

Magnetosynthesis Effect on the Structure and Ground State of Cu 2+ -Based Antiferromagnets

Synthetic variables can have an outsized influence on the crystal structure and magnetic properties of a material, particularly those of quantum materials. In this work, we investigate the impact of synthesis under a magnetic field (magnetosynthesis) on the crystal structure and magnetic properties of several Cu 2+ (S = 1/2)-based materials with antiferromagnetic interactions and varying levels of magnetic frustration, from simple antiferromagnets to a quantum spin liquid. Here, we develop methods to apply small (0.09–0.37 T) magnetic fields during low-temperature hydrothermal, evaporative, and rehydration syntheses of the simple antiferromagnet CuCl 2 ·2H 2 O, the canted antiferromagnet (Cu,Zn) 3 Cl 4 (OH) 2 ·2H 2 O, the frustrated and canted antiferromagnet atacamite Cu 2 (OH) 3 Cl, and the highly frustrated quantum spin liquid herbertsmithite Cu 3 Zn(OH) 6 Cl 2 . We report the first single-crystal X-ray structural determination of the Cu 3 Cl 4 (OH) 2 ·2H 2 O structure type and probe the stability of this phase both experimentally and computationally. Atacamite Cu 2 (OH) 3 Cl synthesized under a 0.19 T field experiences a 0.15 K (∼3%) decrease in its Néel transition temperature. This result suggests that magnetosynthesis with small applied fields may have a very subtle influence upon the magnetic properties of moderately magnetically frustrated 3 d materials.

36 MATERIALS SCIENCE↗

NASA NTRS1996

New Theoretical Technique Developed for Predicting the Stability of Alloys

When alloys are being designed for aeronautical and other applications, a substantial experimental effort is necessary to make incremental changes in the desired alloy properties. A scheme to narrow the field to the most promising candidates would substantially reduce the high cost of this experimental screening. Such a method for determining alloy properties, called the BFS (Bozzolo, Ferrante, and Smith) method, has been developed at the NASA Lewis Research Center. This method was used to calculate the thermal stability and mechanical strength of 200 alloys of Ni3Al, with Cu and Au impurities forming ternary and quaternary compounds. With recent advances in the method, almost any metallic impurity and crystal structure can be addressed. In addition, thermal effects can be addressed with Monte Carlo techniques. At present, an experimental program is in progress to verify these results. The method identified a small number of the most promising candidates from the 200 alloys with the largest negative heat of formation and the highest bulk modulus. This calculation required only 5 min of CPU time on a VAX computer. It is clear that semi-empirical methods have achieved the level of development and reliability to warrant examining this new approach to the problem of alloy design. The present work was meant to demonstrate, perhaps in a rather simple way, this power. This type of application of atomistic simulation methods can narrow the gap and improve the feedback between theoretical predictions and laboratory experimentation.

Source record↗

DOE OSTI2023

Topology-enhanced mechanical stability of swelling nanoporous electrodes

Abstract Materials like silicon and germanium offer a 10-fold improvement in charge capacity over conventional graphite anodes in lithium-ion batteries but experience a roughly threefold volume increase during lithiation, which challenges ensuring battery integrity. Nanoporous silicon, created by liquid-metal-dealloying, is a potentially attractive anode design to mitigate this challenge, exhibiting both higher capacity and extended cycle lifetimes. However, how nanoporous structures accommodate the large volume change is unknown. Here, we address this question by using phase-field modeling to produce nanoporous particles and to investigate their elastoplastic swelling behavior and fracture. Our simulations show that enhanced mechanical stability results from the network topology consisting of ligaments connected by bulbous, sphere-like nodes. The ligaments forcefully resist elongation while the nodes, behaving like isolated spherical particles, experience large stresses driving fracture. However, being smaller compared to a sphere of the same volume as the entire nanoporous particle, the nodes are more protected against fracture.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Greigite (Fe 3 S 4 ) is thermodynamically stable: Implications for its terrestrial and planetary occurrence

Significance The new experimental thermodynamic studies of bulk, nanophase, and monoclinic high-pressure forms of greigite (Fe 3 S 4 ) confirm its stability in the Fe–S system and explain its common occurrence in sediments, magnetotactic bacteria, and other ambient temperature environments under anoxic conditions. The data disprove the commonly held hypothesis that greigite is a metastable phase. The low surface energy of greigite provides insight not only into the stability of greigite nanoparticles but also into their role in prebiotic, biological, and planetary processes. Our experimental data for the stability of the three forms of Fe 3 S 4 confirm that it could be stable on Mercury, thus contributing to Mercury’s weak magnetic field.

36 MATERIALS SCIENCE↗

NASA NTRS2008

Temporal Stability of Surface Roughness Effects on Radar Based Soil Moisture Retrieval During the Corn Growth Cycle

A representative soil surface roughness parameterization needed for the retrieval of soil moisture from active microwave satellite observation is difficult to obtain through either in-situ measurements or remote sensing-based inversion techniques. Typically, for the retrieval of soil moisture, temporal variations in surface roughness are assumed to be negligible. Although previous investigations have suggested that this assumption might be reasonable for natural vegetation covers (Moran et al. 2002, Thoma et al. 2006), insitu measurements over plowed agricultural fields (Callens et al. 2006) have shown that the soil surface roughness can change considerably over time. This paper reports on the temporal stability of surface roughness effects on radar observations and soil moisture retrieved from these radar observations collected once a week during a corn growth cycle (May 10th - October 2002). The data set employed was collected during the Optimizing Production Inputs for Economic and Environmental Enhancement (OPE3) field campaign covering this 2002 corn growth cycle and consists of dual-polarized (HH and VV) L-band (1.6 GHz) acquired at view angles of 15, 35, and 55 degrees. Cross-polarized L baud radar data were also collected as part of this experiment, but are not used in the analysis reported on here. After accounting for vegetation effects on radar observations, time-invariant optimum roughness parameters were determined using the Integral Equation Method (IEM) and radar observations acquired over bare soil and cropped conditions (the complete radar data set includes entire corn growth cycle). The optimum roughness parameters, soil moisture retrieval uncertainty, temporal distribution of retrieval errors and its relationship with the weather conditions (e.g. rainfall and wind speed) have been analyzed. It is shown that over the corn growth cycle, temporal roughness variations due to weathering by rain are responsible for almost 50% of soil moisture retrieval uncertainty depending on the sensing configuration. The effects of surface roughness variations are found to be smallest for observations acquired at a view angle of 55 degrees and HH polarization. A possible explanation for this result is that at 55 degrees and HH polarization the effect of vertical surface height changes on the observed radar response are limited because the microwaves travel parallel to the incident plane and as a result will not interact directly with vertically oriented soil structures.

Joseph, A.T.↗

DOE OSTI2021

Evaluation of Force Fields for Molecular Dynamics Simulations of Platinum in Bulk and Nanoparticle Forms

Here, understanding the size- and shape-dependent properties of platinum nanoparticles is critical for enabling the design of nanoparticle-based applications with optimal and potentially tunable functionality. Toward this goal, we evaluated nine different empirical potentials with the purpose of accurately modeling faceted platinum nanoparticles using molecular dynamics simulation. First, the potentials were evaluated by computing bulk and surface properties - surface energy, lattice constant, stiffness constants, and the equation of state - and comparing these to prior experimental measurements and quantum mechanics calculations. Then, the potentials were assessed in terms of the stability of cubic and icosahedral nanoparticles with faces in the {100} and {111} planes, respectively. Although none of the force fields predicts all the evaluated properties with perfect accuracy, one potential - the embedded atom method formalism with a specific parameter set - was identified as best able to model platinum in both bulk and nanoparticle forms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Roadmap on commercialization of metal halide perovskite photovoltaics

Perovskite solar cells (PSCs) represent one of the most promising emerging photovoltaic technologies due to their high power conversion efficiency. However, despite the huge progress made not only in terms of the efficiency achieved, but also fundamental understanding of the relevant physics of the devices and issues which affect their efficiency and stability, there are still unresolved problems and obstacles on the path toward commercialization of this promising technology. In this roadmap, we aim to provide a concise and up to date summary of outstanding issues and challenges, and the progress made toward addressing these issues. While the format of this article is not meant to be a comprehensive review of the topic, it provides a collection of the viewpoints of the experts in the field, which covers a broad range of topics related to PSC commercialization, including those relevant for manufacturing (scaling up, different types of devices), operation and stability (various factors), and environmental issues (in particular the use of lead). We hope that the article will provide a useful resource for researchers in the field and that it will facilitate discussions and move forward toward addressing the outstanding challenges in this fast-developing field.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Probing the Electronic and Opto-Electronic Properties of Multilayer MoS 2 Field-Effect Transistors at Low Temperatures

Transition metal dichalcogenides (TMDs)-based field-effect transistors (FETs) are being investigated vigorously for their promising applications in optoelectronics. Despite the high optical response reported in the literature, most of them are studied at room temperature. To extend the application of these materials in a photodetector, particularly at a low temperature, detailed understanding of the photo response behavior of these materials at low temperatures is crucial. Here we present a systematic investigation of temperature-dependent electronic and optoelectronic properties of few-layers MoS 2 FETs, synthesized using the mechanical exfoliation of bulk MoS 2 crystal, on the Si/SiO 2 substrate. Our MoS 2 FET show a room-temperature field-effect mobility μ FE ~40 cm 2 ·V -1 ·s -1 , which increases with decreasing temperature, stabilizing at 80 cm 2 ·V -1 ·s -1 below 100 K. The temperature-dependent (50 K < T < 300 K) photoconductivity measurements were investigated using a continuous laser source λ = 658 nm (E = 1.88 eV) over a broad range of effective illuminating laser intensity, P eff (0.02 μW < P eff < 0.6 μW). Photoconductivity measurements indicate a fractional power dependence of the steady-state photocurrent. The room-temperature photoresponsivity (R) obtained in these samples was found to be ~2 AW -1 , and it increases as a function of decreasing temperature, reaching a maximum at T = 75 K. The optoelectronic properties of MoS 2 at a low temperature give an insight into photocurrent generation mechanisms, which will help in altering/improving the performance of TMD-based devices for various applications.

2D materials↗