Unshielded Operation of a Miniaturized Radiofrequency Magnetometer in Earth?s Field.
Abstract not provided.
Bainbridge, Jonathan↗
SEARCH · Engineering Papers
Results for “Field Operations”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Unshielded Operation of a Miniaturized Radiofrequency Magnetometer in Earth?s Field.
Abstract not provided.
Bainbridge, Jonathan↗
Accelerating Phase Field Simulations Through Time Extrapolation Using Adaptive Fourier Neural Operators and UNets
Explore the source record for details and available documents.
Bonneville, Christophe Pol Andre↗
The solar wind-magnetosphere-ionosphere current-voltage relationship
The global current-voltage relationship for the solar wind-magnetosphere-ionosphere system (SW-M-I) is investigated, restricting the study to strong southward IMF. The dynamo presently identified is on open field lines, and it operates at close to short circuit and at a fraction of the available power output. Control of the dynamo by ionospheric conductivity is discussed. Implications of the simulation results, including the relationship between open and closed field dynamos, the effect of solar wind conditions, the control of reconnection on the bow, the size of the open field line region, and the effects of increased auroral conductivity, are discussed.
Fedder, J. A.↗
Operation of A Sunpower M87 Cryocooler In A Magnetic Field
The Alpha Magnetic Spectrometer-02 (AMS-02) is an experiment that will be flown as an attached payload on the International Space Station to detect dark matter and antimatter. It uses large superconducting magnets cooled with superfluid helium to bend the path of cosmic particles through a series of detectors, which then measure the mass, speed, charge, and direction of the particles. Four Sunpower M87N Stirling-cycle cryocoolers are used to extend the mission life by cooling the outer vapor-cooled shield of the dewar. The main magnet coils are separated by a distance of approximately 1 m and the coolers are located approximately 1.5 m from the center line of the magnet, where the field is as high as 925 gauss perpendicular to the cryocooler axis and 400 gauss along the cryocooler axis. Interactions between the applied magnetic field and the linear motor may result in additional forces and torques on the compressor piston. Motion of the compressor arid displacer pistons through the magnetic field spatial gradients will generate eddy currents. Additional eddy currents are created during magnet charge, discharge, and quench by the time-varying magnetic field. The results of tests to determine the magnitude of the forces, torques, and heating effects, as well as the need for additional magnetic shielding, are presented.
Breon, S. R.↗
Stabilized operation mode of laser ion source using pulsed magnetic field
N/A
43 PARTICLE ACCELERATORS↗
Applied nonrelativistic conformal field theory: Scattering-length and effective-range corrections to rate of production of three neutrons at low relative momenta
Due to an accidentally large s-wave scattering length, in a relatively wide range of energy, neutrons are approximately described by the nonrelativistic conformal field theory of unitarity fermions, perturbed by one relevant and an infinite number of irrelevant operators. We develop a formalism which provides a nonperturbative definition of local operators in that nonrelativistic conformal field theory. We compute the scattering-length and effective-range corrections to the two-point functions of primary charge-three operators using the technique of conformal perturbation theory. These calculations allow us to find the first corrections to the scale-invariant behavior of the rate of nuclear reactions with three neutrons in the final state in the regime when the neutrons have small relative momenta.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Operation and performance of VRF systems: Mining a large-scale dataset
The energy consumption of air-conditioning systems has gained increasing attention as it contributes significantly to the global building energy use. The variable refrigerant flow (VRF) system is a common air-conditioning system applied widely in residential and office buildings in China. Understanding the actual operation and performance of VRF systems is fundamental for the energy-efficient design and operation of VRF systems. Previous research on VRF system operation used either limited field data covering certain building types and climate zones or used a questionnaire to obtain a larger dataset. However, they did not capture the wide applications of VRF systems quantitatively across all building types, climate zones, and operating conditions. To fill this gap, statistical and clustering analysis was conducted on the newly proposed key performance indicators of approximately 287,000 VRF systems for residential and commercial buildings in all five climate zones in China. In this work, the main findings are: (1) VRF systems are mainly used for cooling in all climate zones in China; (2) among all building types, the duration of use is lowest in residential buildings and highest in hotels and medical buildings; (3) the distribution of the ideal VRF cooling coefficient of performance (COP) is similar across all climate zones and building types; whereas the COPs of ideal VRF heating in the Severe Cold region and Cold regions are lower than those in other climate zones; and (4) partial load operations for VRF systems are common in residential buildings and office buildings due to the part-time-part-space operation mode. These findings can inform the actual application of VRF systems in China, supporting the design, operation, industry standard development, and performance optimization of VRF systems.
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
An inverted cylindrical sputter magnetron as metal vapor supply for electron cyclotron resonance ion sources
An inverted cylindrical sputter magnetron device has been developed. The magnetron is acting as a metal vapor supply for an electron cyclotron resonance (ECR) ion source. FEM simulation of magnetic flux density was used to ensure that there is no critical interaction between both magnetic fields of magnetron and ECR ion source. Spatially resolved double Langmuir probe and optical emission spectroscopy measurements show an increase in electron density by one order of magnitude from 1 × 10{sup 10} cm{sup −3} to 1 × 10{sup 11} cm{sup −3}, when the magnetron plasma is exposed to the magnetic mirror field of the ECR ion source. Electron density enhancement is also indicated by magnetron plasma emission photography with a CCD camera. Furthermore, photographs visualize the formation of a localized loss-cone - area, when the magnetron is operated at magnetic mirror field conditions. The inverted cylindrical magnetron supplies a metal atom load rate of R > 1 × 10{sup 18} atoms/s for aluminum, which meets the demand for the production of a milliampere Al{sup +} ion beam.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Auto-magnetizing liners for magnetized inertial fusion
Here, the MagLIF (Magnetized Liner Inertial Fusion) concept has demonstrated fusion-relevant plasma conditions on the Z accelerator using external field coils to magnetize the fuel before compression. We present a novel concept (AutoMag), which uses a composite liner with helical conduction paths separated by insulating material to provide fuel magnetization from the early part of the drive current, which by design rises slowly enough to avoid electrical breakdown of the insulators. Once the magnetization field is established, the drive current rises more quickly, which causes the insulators to break down allowing the drive current to follow an axial path and implode the liner in the conventional z-pinch manner. There are two important advantages to AutoMag over external field coils for the operation of MagLIF. Low inductance magnetically insulated power feeds can be used to increase the drive current, and AutoMag does not interfere with diagnostic access. Also, AutoMag enables a pathway to energy applications for MagLIF, since expensive field coils will not be damaged each shot. Finally, it should be possible to generate Field Reversed Configurations (FRC) by using both external field coils and AutoMag in opposite polarities. This would provide a means to studying FRC liner implosions on the 100 ns time scale.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Evaluation of volcano-style field ionization source and field emitting cathodes for mass spectrometry and applications
A volcano-style field ionization source was tested with eight different gases: hydrogen, helium, ammonia, methane, argon, neon, water vapor, and hydrogen sulfide. For ammonia, hydrogen sulfide, and water, the ionization efficiency of the field ionization source was determined as a function of the electrical potential difference between the ionizer and its counterelectrode. The ionization efficiencies for the other gases were too low to be measured in the present apparatus. The operating characteristics of a field emission cathode, were studied, in the presence of the same eight gases at pressures up to 0.00001 torr. The presence of the gases caused little or no significant change in the electron emission from the cathodes. Results indicate that the field emission cathode has advantages over electrically heated cathodes as a source of an electron beam in spacecraft mass spectrometers.
Buttrill, S. E., Jr.↗
Measurement of Wind Loading on Heliostats at the Crescent Dunes Power Plant: An Overview
The cost of solar collectors constitutes almost one third of the total cost of a CSP plant. One of the ongoing challenges in the design of these collectors is wind loading on mirrors, support structures, and drives. A particular challenge is dynamic wind loading, caused by the turbulent wind flow. To date, the design of solar collector structures has relied on wind tunnel experiments and numerical simulations that do not entirely capture the dynamic effects observed at scale. The CSP industry has shown increased interest in validating the idealized assumptions with measurements obtained in operational settings to improve wind load assumptions and increase reliability and cost-efficiency of the collector design. Further, performance models need realistic assumptions about wind loading and its impact on optical performance. In a parabolic trough field campaign, NREL successfully collected a wealth of long-term, high-resolution wind and loads data [2], that are publicly available and that can be used for the above-mentioned purposes. Heliostats are impacted differently by wind than parabolic troughs, due to their different shape, size, and field layout. To study the impact of wind and turbulence on heliostats, we initiated another field campaign in an operational power- tower plant, Crescent Dunes, in Nevada, USA. In this work, we present an overview of the measurements, first results, and potential implications of wind driven loads on Heliostats.
concentrated solar power↗
Analysis of Geothermal Reservoir and Well Operational Conditions using Monthly Production Reports from Nevada and California
When conducting techno-economic analysis of geothermal systems, assumptions are typically necessary for reservoir and wellbore parameters such as producer/injector well ratio, production temperature drawdown, and production/injection temperature, pressure and flow rate. To decrease uncertainty of several of these parameters, we analyzed field data reported by operators in monthly production reports. This paper presents results of a statistical analysis conducted on monthly production reports at 19 power plants in California and Nevada covering 196 production wells and 175 injection wells. The average production temperature was 304 degrees F (151 degrees C) for binary plants and 310 degrees F (154 degrees C) for flash plants. The average injection temperature was 169 degrees F (76 degrees C) for binary plants and 173 degrees F (78 degrees C) for flash plants. The average production temperature drawdown was 0.5% per year for binary plants and 0.8% per year for flash plants. The average production well flow rate was 112 L/s for binary plant wells and 62 L/s for flash plant wells. For all 19 plants combined, the median injectivity index value was 3.8 L/s/bar, and the average producer/injector well ratio was 1.6. As an additional example of analysis using data from monthly production reports, a coupled reservoir-wellbore model was developed to derive productivity curves at various pump horsepower settings. The workflow and model were applied to two example production wells.
15 GEOTHERMAL ENERGY↗
First Operation of a Resistive Shell Liquid Argon Time Projection Chamber: A New Approach to Electric-Field Shaping
We present a new technology for the shaping of the electric field in Time Projection Chambers (TPCs) using a carbon-loaded polyimide foil. This technology allows for the minimisation of passive material near the active volume of the TPC and, thus, is capable to reduce background events originating from radioactive decays or scattering on the material itself. Furthermore, the high and continuous electric resistivity of the foil limits the power dissipation per unit area and minimizes the risks of damages in the case of an electric field breakdown. Replacing the conventional field cage with a resistive plastic film structure called “shell” decreases the number of components within the TPC and, therefore, reduces the potential points of failure when operating the detector. A prototype liquid argon (LAr) TPC with such a resistive shell and with a cathode made of the same material was successfully tested for long-term operation with electric field values up to 1 . 6 k V /. The experiment shows that it is feasible to successfully produce and shape the electric field in liquefied noble-gas detectors with this new technology.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Impact of Parcel Size, Field Shape, Crop Yield, Storage Location, and Collection Equipment on the Performance of Single-Pass Cut-and-Chip Harvest System in Commercial Shrub Willow Fields
In this paper, an integrated system of harvesting, collecting, and transporting willow biomass crop to a storage site was modeled and evaluated using the IBSAL simulation model. A scenario analysis was used to quantify the impacts of five major input parameters on the performance of the integrated system. These parameters include parcel size, field shape, willow yield, distance to the storage site, and type of the collection equipment. Multiple performance indicators were identified to quantify the impacts on the system such as size of the equipment fleet, effective material and field capacity of the harvester, operating costs, and waiting times. The input data were collected from 36 commercial, short-rotation, shrub willow fields in northern New York State. The simulation results indicated that crop yield and type of collection equipment have the highest impact on operating costs and the equipment fleet size. As the size of equipment fleet increases in the system, variability in the system performance tends to increase. Field shape has the least impact on the overall system performance compared to the other four input parameters. The simulation results suggest that a combination of performance indicators need to be considered to evaluate the overall performance of the dynamic and complex system of harvesting, collection and transportation in commercial willow fields. The developed IBSAL model and scenario analysis approach can assist in planning this system based on the characteristics of field, crop, and logistical equipment to reach a high system performance.
54 ENVIRONMENTAL SCIENCES↗
Real-Time Science Operations to Support a Lunar Polar Volatiles Rover Mission
Future human exploration of the Moon will likely rely on in situ resource utilization (ISRU) to enable long duration lunar missions. Prior to utilizing ISRU on the Moon, the natural resources (in this case lunar volatiles) must be identified and characterized, and ISRU demonstrated on the lunar surface. To enable future uses of ISRU, NASA and the CSA are developing a lunar rover payload that can (1) locate near subsurface volatiles, (2) excavate and analyze samples of the volatile-bearing regolith, and (3) demonstrate the form, extractability and usefulness of the materials. Such investigations are important both for ISRU purposes and for understanding the scientific nature of these intriguing lunar volatile deposits. Temperature models and orbital data suggest near surface volatile concentrations may exist at briefly lit lunar polar locations outside persistently shadowed regions. A lunar rover could be remotely operated at some of these locations for the approx. 2-14 days of expected sunlight at relatively low cost. Due to the limited operational time available, both science and rover operations decisions must be made in real time, requiring immediate situational awareness, data analysis, and decision support tools. Given these constraints, such a mission requires a new concept of operations. In this paper we outline the results and lessons learned from an analog field campaign in July 2012 which tested operations for a lunar polar rover concept. A rover was operated in the analog environment of Hawaii by an off-site Flight Control Center, a rover navigation center in Canada, a Science Backroom at NASA Ames Research Center in California, and support teams at NASA Johnson Space Center in Texas and NASA Kennedy Space Center in Florida. We find that this type of mission requires highly efficient, real time, remotely operated rover operations to enable low cost, scientifically relevant exploration of the distribution and nature of lunar polar volatiles. The field demonstration illustrated the need for science operations personnel in constant communications with the flight mission operators and the Science Backroom to provide immediate and continual science support and validation throughout the mission. Specific data analysis tools are also required to enable immediate data monitoring, visualization, and decision making. The field campaign demonstrated that this novel methodology of real-time science operations is possible and applicable to providing important new insights regarding lunar polar volatiles for both science and exploration.
Moon; Volatiles; Rover; Missions↗
Keyless Infrastructure Security Solution (KISS) (Technology Landscape Analysis Report)
The following landscape analysis explores blockchain or distributed ledger technologies application to securing electricity infrastructure. The exploration of how distributed ledger technologies can be used to increase the trustworthiness and integrity of the grid’s edge is imperative to the economic, security and well-being of all modern societies that rely on electricity. Blockchain technology’s ability to secure, track and optimize complex data transactions provides an exciting value proposition to securing and optimizing the U.S. power grid. An energy delivery system (EDS) operating at the grid’s edge requires unprecedented levels of security and trustworthiness to verify integrity of data and manage complex transactive and distributed Energy Resources (DERs) exchanges. Moreover, grid-edge devices lack visibility, control and security to conduct real-time energy transactions with the required security, speed and scale. The U.S. power grid is a complex system of systems that requires secure, reliable and trustworthy EDSs. Grid modernization has increased the speed and size of data sets exchanged on these systems (Gordes and Mylrea 2014). Exasperating the challenge is these systems are increasingly distributed creating new data fidelity and interoperability challenges for grid operators struggling to balance and incorporate DERs. Blockchain technology provides an atomically verifiable cryptographic signature to help increase the trustworthiness of EDSs at the grid’s edge. This feature is especially important at distribution level since EDSs and field devices have increasing operational and security requirements that are often diametrically opposed. For example, as data, speed and analytic requirements increase, security and functionality requirements increase. Further, as the grid’s edge incorporate DERs and transacts in real time, availability is prioritized over the integrity and confidentially of that data. Blockchain presents the prospect of solving some of these complex challenges related to grid security and modernization. However, there are more questions about blockchain applicability than answers. There are number of theoretical blockchain applications to the energy sector, but few energy utilities have actually applied, implemented or even experimented with the underlying distributed ledger technology and consensus algorithms that enable blockchain to exchange data more efficiently and securely.
24 POWER TRANSMISSION AND DISTRIBUTION↗
Wideband comet camera lens design
A quarter-meter diameter, modified Ritchey-Chretien camera is described for spacecraft-based observation of Halley's Comet. The system will operate over an unusually broad spectral region, from 0.1216 micron (the hydrogen Lyman-alpha line) to 1.1 microns using reflective primary and secondary mirror optics and a thin UV-grade lithium fluoride refractive element as a field corrector near the image plane. The f/12, 3000 mm focal length camera has a 0.4 deg full field of view for operation with a 15 x 15 mm charge-coupled device detector array. The UV-enhanced silicon CCD detector is a 1000 x 1000 array of 15 micron pixels which establishes the system resolution requirement. The optical design and performance are discussed, with an emphasis on the image analysis with respect to pixel resolution elements used for viewing extended objects such as comets.
Huber, E. D.↗