Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FIGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

A history of the science and politics of climate change: the role of the Intergovernmental Panel on Climate Change

In response to growing concern about human-induced global climate change, the UN Intergovernmental Panel on Climate Change (IPCC) was formed in 1988. Written by its first Chairman, this book is a unique overview of the history of the IPCC. It describes and evaluates the intricate interplay between key factors in the science and politics of climate change, the strategy that has been followed, and the regretfully slow pace in getting to grips with the uncertainties that have prevented earlier action being taken. The book also highlights the emerging conflict between establishing a sustainable global energy system and preventing a serious change in global climate. Contents are: Part I. The Early History of the Climate Change Issue: 1. Nineteenth century discoveries; 2. The natural carbon cycle and life on earth; 3. Global research initiatives in meteorology and climatology; 4. Early international assessments of climate change; Part II. The Climate Change Issue Becomes One of Global Concern: 5. Setting the stage; 6. The scientific basis for a climate convention; 7. Serving the Intergovernmental Negotiating Committee; 8. The Second IPP Assessment Report; 9. In the aftermath of the IPCC Second Assessment; 10. The Kyoto Protocol is agreed and a third assessment begun; 11. A decade of hesitance and slow progress; Part III. A Turning Point in Addressing Climate Change?: 12. Key scientific finding of prime political relevance; 13. Climate change and the future global energy supply system; Concluding remarks. 9 figs.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Researching power plant water recovery

A range of projects supported by NETl under the Innovations for Existing Plant Program are investigating modifications to power plant cooling systems for reducing water loss, and recovering water from the flue gas and the cooling tower. This paper discusses two technologies showing particular promise condense water that is typically lost to evaporation, SPX technologies' Air2Air{sup trademark} condenses water from a cooling tower, while Lehigh University's process condenses water and acid in flue gas. 3 figs.

20 FOSSIL-FUELED POWER PLANTS↗

Production of coal-based fuels and value-added products: coal to liquids using petroleum refinery streams

We are studying several processes that utilize coal, coal-derived materials, or biomass in existing refining facilities. A major emphasis is the production of a coal-based replacement for JP-8 jet fuel. This fuel is very similar to Jet A and jet A-1 in commercial variation, so this work has significant carry-over into the private sector. We have been focusing on three processes that would be retrofitted into a refinery: (1) coal tar/refinery stream blending and hydro-treatment; (2) coal extraction using refinery streams followed by hydro-treatment; and (3) co-coking of coal blended with refinery streams. 4 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

Centrifugal dryers keep pace with the market

New plant design and upgrades create a shift in dewatering strategies. The article describes recent developments. Three major manufacturers supply centrifugal dryers - TEMA, Centrifugal & Mechanical Industries (CMI) and Ludowici. CMI introduced a line of vertical centrifugal dryers. TEMA improved the techniques by developing a horizontal vibratory centrifuge (HVC) which simplified maintenance. 3 figs., 1 photo.

01 COAL, LIGNITE, AND PEAT↗

Ignition characteristics of pulverized coal under high oxygen concentrations

In order to reduce overall fuel consumption, or partially substitute a 'valuable' fuel with a poor one, in electric power plant boilers, oxygen enrichment of combustion air can be very effective. Combustion characteristics of three Chinese pulverized coals, Shenmu bituminous, Tianhushan anthracite, and Duolun lignite, and three different particle sizes, under high oxygen concentrations more than 21%, have been investigated using thermogravimetric/differential scanning calorimetry analysis (TG/DSC) and a drop-tube furnace. Results showed that the ignitability, the combustion property, and the burnout were largely improved when added oxygen was used, especially for small particles, the influence of oxygen on the bituminous coal was greater than the lignite and the anthracite, and the suitable O{sub 2} concentration for the ignition of pulverized coal flow should be controlled below 40%. 38 refs., 12 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Flue gas desulfurization with an electrostatic spraying absorber

A flue gas desulfurization device and process were developed and tested in this study. The process used an electrostatic spraying absorber (ESA) as the reactor, where SO{sub 2} was absorbed into an aqueous slurry of reactive Ca(OH){sub 2}. The absorption process was analyzed by using the two-film theory of mass-transfer. Both the liquid and gas side resistances were important, and the absorption rate was controlled by a combination of both gas-film and liquid-film diffusion controls. The ESA characteristics were investigated between applied voltages from -10 to 10 kV at various slurry flow rates. The SO{sub 2} removal efficiency was independent of the polarity of the applied voltage. A slightly higher efficiency was obtained with the conduction charging configuration than with the induction charging configuration. A model of external mass-transfer with a chemical enhancement factor was proposed for estimation of the absorption efficiency; the theoretical SO{sub 2} removal efficiency obtained was compared with the experimental data. 18 refs., 6 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Role of iron-based catalyst and hydrogen transfer in direct coal liquefaction

The aim of this research is to understand the major function of iron-based catalysts on direct coal liquefaction (DCL). Pyrolysis and direct liquefaction of Shenhua bituminous coal were carried out to investigate the effect of three solvents (wash-oil from coal-tar, cycle-oil from coal liquefaction, and tetralin) in a N{sub 2} or a H{sub 2} atmosphere and with or without catalyst. The hydrogen content in the solvent and liquid product and the H{sub 2} consumption for every run were calculated to understand the hydrogen transfer approach in DCL. The results showed that the iron-based catalyst promotes the coal pyrolysis, and the dominating function of the catalyst in DCL is to promote the formation of activated hydrogen and to accelerate the secondary distribution of H in the reaction system including the gas, liquid, and solid phases. The major transfer approach of the activated hydrogen is from molecular hydrogen to solvent and then from solvent to coal, and the solvent takes on the role of a 'bridge' in the hydrogen transfer approach. 31 refs., 5 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Mercury oxidation promoted by a selective catalytic reduction catalyst under simulated Powder River Basin coal combustion conditions

A bench-scale reactor consisting of a natural gas burner and an electrically heated reactor housing a selective catalytic reduction (SCR) catalyst was constructed for studying elemental mercury (Hg{sup 0}) oxidation under SCR conditions. A low sulfur Powder River Basin (PRB) subbituminous coal combustion fly ash was injected into the entrained-flow reactor along with sulfur dioxide (SO{sub 2}), nitrogen oxides (NOx), hydrogen chloride (HCl), and trace Hg{sup 0}. Concentrations of Hg{sup 0} and total mercury (Hg) upstream and downstream of the SCR catalyst were measured using a Hg monitor. The effects of HCl concentration, SCR operating temperature, catalyst space velocity, and feed rate of PRB fly ash on Hg0 oxidation were evaluated. It was observed that HCl provides the source of chlorine for Hg{sup 0} oxidation under simulated PRB coal-fired SCR conditions. The decrease in Hg mass balance closure across the catalyst with decreasing HCl concentration suggests that transient Hg capture on the SCR catalyst occurred during the short test exposure periods and that the outlet speciation observed may not be representative of steady-state operation at longer exposure times. Increasing the space velocity and operating temperature of the SCR led to less Hg{sup 0} oxidized. Introduction of PRB coal fly ash resulted in slightly decreased outlet oxidized mercury (Hg{sup 2+}) as a percentage of total inlet Hg and correspondingly resulted in an incremental increase in Hg capture. The injection of ammonia (NH{sub 3}) for NOx reduction by SCR was found to have a strong effect to decrease Hg oxidation. The observations suggest that Hg{sup 0} oxidation may occur near the exit region of commercial SCR reactors. Passage of flue gas through SCR systems without NH{sub 3} injection, such as during the low-ozone season, may also impact Hg speciation and capture in the flue gas. 18 refs., 7 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Investigations of ash fouling with cattle wastes as reburn fuel in a small-scale boiler burner under transient conditions

Fouling behavior under reburn conditions was investigated with cattle wastes (termed as feedlot biomass, FB) and coal as reburn fuels under a transient condition and short-time operation. A small-scale (30 kW or 100,000 Btu/hr) boiler burner research facility was used for the reburn experiments. The fuels considered for these experiments were natural gas (NG) for the ashless case, pure coal, pure FB, and blends of coal and FB. Two parameters that were used to characterize the ash 'fouling' were (1) the overall heat-transfer coefficient (OHTC) when burning NG and solid fuels as reburn fuels, and (2) the combustible loss through ash deposited on the surfaces of heat exchanger tubes and the bottom ash in the ash port. A new methodology is presented for determining ash fouling behavior under transient conditions. Results on the OHTCs for solid reburn fuels are compared with the OHTCs for NG. It was found that the growth of the layer of ash depositions over longer periods typically lowers OHTC, and the increased concentration of ash in gas phase promotes radiation in high-temperature zones during initial periods while decreasing the heat transfer in low-temperature zones. The ash analyses indicated that the bottom ash in the ash port contained a smaller percentage of combustibles with a higher FB percentage in the fuels, indicating better performance compared with coal because small particles in FB burn faster and the FB has higher volatile matter on a dry ash-free basis promoting more burn out. 16 refs., 12 figs., 6 tabs.

01 COAL, LIGNITE, AND PEAT↗

Effect of meteorological parameters on fine and coarse particulate matter mass concentration in a coal-mining area in Zonguldak, Turkey

In this work, the effect of meteorological parameters and local topography on mass concentrations of fine (PM2.5) and coarse (PM2.5-10) particles and their seasonal behavior was investigated. A total of 236 pairs of samplers were collected using an Anderson Dichotomous sampler between December 2004 and October 2005. The average mass concentrations of PM2.5, PM2.5-10, and particulate matter less than 10 m in aerodynamic diameter (PM10) were found to be 29.38, 23.85, and 53.23 {mu}g/m{sup 3}, respectively. The concentrations of PM2.5 and PM10 were found to be higher in heating seasons (December to May) than in summer. The increase of relative humidity, cloudiness, and lower temperature was found to be highly related to the increase of particulate matter (PM) episodic events. During non-rainy days, the episodic events for PM2.5 and PM10 were increased by 30 and 10.7%, respectively. This is a result of the extensive use of fuel during winter for heating purposes and also because of stagnant air masses formed because of low temperature and low wind speed over the study area. 54 refs., 8 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

Modeling analyses of the effects of changes in nitrogen oxides emissions from the electric power sector on ozone levels in the eastern United States

In this paper, we examine the changes in ambient ozone concentrations simulated by the Community Multiscale Air Quality (CMAQ) model for summer 2002 under three different nitrogen oxides (NOx) emission scenarios. Two emission scenarios represent best estimates of 2002 and 2004 emissions; they allow assessment of the impact of the NOx emissions reductions imposed on the utility sector by the NOx State Implementation Plan (SIP) Call. The third scenario represents a hypothetical rendering of what NOx emissions would have been in 2002 if no emission controls had been imposed on the utility sector. Examination of the modeled median and 95th percentile daily maximum 8-hr average ozone concentrations reveals that median ozone levels estimated for the 2004 emission scenario were less than those modeled for 2002 in the region most affected by the NOx SIP Call. Comparison of the 'no-control' with the '2002' scenario revealed that ozone concentrations would have been much higher in much of the eastern United States if the utility sector had not implemented NOx emission controls; exceptions occurred in the immediate vicinity of major point sources where increased NO titration tends to lower ozone levels. 13 refs., 8 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Utilization of ventilation air methane as a supplementary fuel at a circulating fluidized bed combustion boiler

Ventilation air methane (VAM) accounts for 60-80% of the total emissions from underground coal mining activities in China, which is of serious greenhouse gas concerns as well as a waste of valuable fuel sources. This contribution evaluates the use of the VAM utilization methods as a supplementary fuel at a circulating fluidized bed combustion boiler. The paper describes the system design and discusses some potential technical challenges such as methane oxidation rate, corrosion, and efficiency. Laboratory experimentation has shown that the VAM can be burnt completely in circulated fluidized bed furnaces, and the VAM oxidation does not obviously affect the boiler operation when the methane concentration is less than 0.6%. The VAM decreased the incomplete combustion loss for the circulating fluidized bed combustion furnace. The economic benefit from the coal saving insures that the proposed system is more economically feasible. 17 refs., 3 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Development of regenerable MgO-based sorbent promoted with K{sub 2}CO{sub 3} for CO{sub 2} capture at low temperatures

To improve their CO{sub 2} absorption capacity, alkali-based sorbents prepared by impregnation and wet mixing method of potassium carbonate on supports such as activated carbon and MgO (KAC130, KACP30, KMg130, and KMgP30), were investigated in a fixed bed reactor (CO{sub 2} absorption at 50-100{sup o}C and regeneration at 150-400{sup o}C). Total CO{sub 2} capture capacities of KMg130-500 and KMgP30-500 were 178.6 and 197.6 mg CO{sub 2}/g sorbent, respectively, in the presence of 11 vol% H{sub 2}O even at 50{sup o}C. The large amount of CO{sub 2} capture capacity of KMgP30-500 and KMg130-500 could be explained by the fact that MgO itself, as well as K{sub 2}CO{sub 3}, could absorb CO{sub 2} in the presence of water vapor even at low temperatures. In particular, water vapor plays an important role in the CO{sub 2} absorption of MgO and KMg130-500 even at low temperatures below 60{sup o}C, in marked contrast to MgO and CaO which can absorb CO{sub 2} at high temperatures. The CO{sub 2} capture capacity of the KMg130-300 sorbent, however, was less than that of KMg130-500 due to the formation of Mg(OH)2 which did not absorb CO{sub 2}. MgO based-sorbents promoted with K{sub 2}CO{sub 3} after CO{sub 2} absorption formed new structures such as K{sub 2}Mg(CO{sub 3}){sub 2} and K{sub 2}Mg(CO{sub 3}){sub 2}.4(H{sub 2}O), unlike KAC130 which showed only the KHCO{sub 3} crystal structure. The new Mg-based sorbents promoted with K{sub 2}CO{sub 3} showed excellent characteristics in that it could satisfy a large amount of CO{sub 2} absorption at low temperatures, a high CO{sub 2} absorption rate, and fast and complete regeneration. 21 refs., 10 figs.

01 COAL, LIGNITE, AND PEAT↗

Magnesium hydroxide extracted from a magnesium-rich mineral for CO{sub 2} sequestration in a gas-solid system

Magnesium hydroxide extracted from magnesium-bearing minerals is considered a promising agent for binding CO{sub 2} as a carbonate mineral in a gas-solid reaction. An efficient extraction route consisting of hydrothermal treatment on serpentine in HCl followed by NaOH titration for Mg(OH){sub 2} precipitation was demonstrated. The extracted Mg(OH){sub 2} powder had a mean crystal domain size as small as 12 nm and an apparent surface area of 54 m{sup 2}/g. Under one atmosphere of 10 vol% CO{sub 2}/N{sub 2}, carbonation of the serpentine-derived Mg(OH){sub 2} to 26% of the stoichiometric limit was achieved at 325{sup o}C in 2 h; while carbonation of a commercially available Mg(OH){sub 2}, with a mean crystal domain size of 33 nm and an apparent surface area of 3.5 m{sup 2}/g, reached only 9% of the stoichiometric limit. The amount of CO{sub 2} fixation was found to be inversely proportional to the crystal domain size of the Mg(OH){sub 2} specimens. The experimental data strongly suggested that only a monolayer of carbonates was formed on the crystal domain boundary in the gas-solid reaction, with little penetration of the carbonates into the crystal domain. 24 refs., 6 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Apportionment of ambient primary and secondary fine particulate matter at the Pittsburgh National Energy Laboratory particulate matter characterization site using positive matrix factorization and a potential source contributions function analysis

Fine particulate matter (PM2.5) concentrations associated with 202 24-hr samples collected at the National Energy Technology Laboratory particulate matter characterization site in south Pittsburgh from October 1999 through September 2001 were used to apportion PM2.5 into primary and secondary contributions using Positive Matrix Factorization (PMF2). Input included the concentrations of PM2.5 mass determined with a Federal Reference Method (FRM) sampler, semi-volatile PM2.5 organic material, elemental carbon (EC), and trace element components of PM2.5. A total of 11 factors were identified. The results of potential source contributions function analysis using PMF2 factors and HYSPLIT-calculated back-trajectories were used to identify those factors associated with specific meteorological transport conditions. The 11 factors were identified as being associated with emissions from various specific regions and facilities including crustal material, gasoline combustion, diesel combustion, and three nearby sources high in trace metals. Three sources associated with transport from coal-fired power plants to the southeast, a combination of point sources to the northwest, and a steel mill and associated sources to the west were identified. In addition, two secondary-material-dominated sources were identified, one was associated with secondary products of local emissions and one was dominated by secondary ammonium sulfate transported to the NETL site from the west and southwest. Of these 11 factors, the four largest contributors to PM2.5 were the secondary transported material, local secondary material, diesel combustion emissions, and gasoline combustion emissions. 26 refs., 10 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Coal miner responses to the personal dust monitor

The personal dust monitor (PDM) and its use by miners is described. With the PDM, miners will be provided with near real time dust exposure during their work shift, enabling individuals and management to be more proactive in preventing over exposure. 2 figs.

01 COAL, LIGNITE, AND PEAT↗

Production of syngas via partial oxidation and CO{sub 2} reforming of coke oven gas over a Ni catalyst

The partial oxidation and CO{sub 2} reforming of coke oven gas (COG) to syngas was investigated on differently sized Ni catalysts in a fluidized-bed reactor. It was found that the catalytic performance of Ni depends strongly on its particle size. The small-sized Ni catalyst exhibited higher activity and higher selectivity in the partial oxidation of COG. The conversion of CH{sub 4} was kept at 80.7% at a lower temperature (750{sup o}C) and a wide space velocity (from 8000 to 80 000 h{sup -1}). CO{sub 2} reforming of COG is also an efficient route for syngas production. The H{sub 2}/CO ratio in the COG-derived syngas could be controlled by manipulating the concentration of O{sub 2} or CO{sub 2} added in the feed. The yield of produced syngas increases with an increase in temperature. 19 refs., 10 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗