Results for “Engineering Model” — Page 77

NASA NTRS2019

NASA's Orbital Debris Optical Program: ES-MCAT Updated and Upgraded

The 1.3m ES-MCAT telescope (or MCAT for short) now has a proven capability for observing objects from Low- Earth Orbit (LEO) out to Geosynchronous (GEO) orbit, and the ability to run all systems autonomously. A GEO survey, the initial focus for MCAT, will commence in late 2019 to map out the current state of the GEO population as input for the ORbital Debris Engineering Model (ORDEM 4.x). This survey will statistically sample the GEO belt (0 to ~15 deg orbital inclinations) to detect both known and unknown targets. If a break-up occurs, additional surveys of the break-up field can be followed for discovery and investigations of daughter debris fragments from the parent satellite. Discovery can be accomplished by tracking orbits near to and including the parent object’s orbit. Targeted observations of debris can be taken with a suite of broadband filters for characterizing individual objects by ratetracking their known or calculated orbital elements (Two-Line Element sets, TLEs). Several modifications and upgrades have been made to the instrumentation and systems originally installed in 2015 and are reported here. In 2018, MCAT’s primary mirror was recoated with a high-end protected, enhanced silver by the ZeCoat Corporation. The CCD chip was replaced in the Spectral Instruments camera with a broad-band antireflective coated chip. The automated weather systems have been modified from the original system, removing some weather sensors and installing replacements that are better suited to Ascension’s weather and environment. A new 2.5-m ObservaDome replaced the Astrohaven dome on the nearby tower platform that will house an auxiliary 0.4-meter telescope. Finally, in 2019, the Observatory Control System was upgraded to 2.0 which includes additional flexibility for automating data collection and reduction. With these updates completed, MCAT is now well on track to reach Full Operational Capability (FOC) in 2019 for its survey, rate-track, and TLE tracking capabilities.

Lederer, S. M.↗

NASA NTRS2019

Orbital Debris Radar Measurements from the Haystack Ultra-Wideband Satellite Imaging Radar (HUSIR): 2014-2017

For many years, the NASA Orbital Debris Program Office (ODPO) has partnered with the U.S. Department of Defense and the Massachusetts Institute of Technology Lincoln Laboratory (MIT/LL) to collect data on the orbital debris environment using the Haystack radar. These measurements are used to characterize the small debris environment in low Earth orbit (LEO), down to a noise-limited size of approximately 5 mm—depending on altitude. The Haystack radar operated by MIT Lincoln Lab underwent upgrades starting in May 2010, with operations resuming in 2014 as the Haystack Ultra-wideband Satellite Imaging Radar (HUSIR). Hence, the data collected beginning in 2014 represents the first dataset available from this upgraded sensor. HUSIR is the primary source of data used by the ODPO to statistically sample orbital debris in the 5-mm to 10-cm size regime in LEO and is a key source of data to build and validate the NASA Orbital Debris Engineering Model. In this paper, we will present recent results from measurements performed during the US Government fiscal years 2014 – 2017. Using the NASA Size Estimation Model, a method based on laboratory radar measurements of debris, we will compare the size distributions of selected orbital debris populations over this 4-year period and flux measurements of orbital debris greater than 1 cm.

Murray, James↗

NASA NTRSDate not supplied

S-Band Transponder Multi-Network Compatibility, Space Environment and Radiation Testing

This paper presents the development and testing of the Software Define Radio (SDR) transceiver to meet the emerging needs for SmallSat communication and navigation. Vulcan Wireless and NASA Goddard Space Flight Center (GSFC) collaborated in testing the Vulcan Wireless S-band SDR engineering model. Apart from testing, communication link analysis was performed for a Low Earth Orbit (LEO) 400 km scenario. The results of the compatibility, radiation, environmental testing, and link analysis are presented. Also, this paper reviews a set of SmallSat missions under development at NASA GSFC.

Software Define Radio, transceiver, S-band↗

NASA NTRSDate not supplied

Precision Landing Navigation Performance of Human-Scale Lunar and Mars Landers

To meet the unique challenges of crewed Lunar and Mars precision landings, NASA’s Safe and Precise Landing Integrated Capabilities Evolution project has worked to advance autonomous spacecraft navigation by increasing the technology readiness level of key deorbit, entry, descent, and landing systems, including navigation sensors. Different sensors and their effects on overall system performance are evaluated using six-degree-of-freedom simulations with physics-based engineering models that capture the relevant vehicle systems and environmental effects. Building on an existing simulation framework, this work demonstrates how improved modeling fidelity enables rapid and detailed assessment of various navigation sensors on human-scale Lunar and Mars landing vehicles using NASA reference architectures.

navigation↗

NASA NTRSDate not supplied

Adaptive Pressure Profile Method to Locate the Isolator Shock Train Leading Edge Given Limited Pressure Information

To maximize the performance of high-speed air-breathing engines, such as dual-mode scramjets, the streamwise location of the shock train leading edge (STLE) is ideally placed as far upstream in the isolator as possible while avoiding engine unstart. Thus, it is of interest to quantify and control the STLE location as the vehicle travels along its flight trajectory. The STLE location is typically quantified using wall static pressure measurements but there are often restrictions on the number and placement of transducers, thus reducing the accuracy and overall capability of STLE detection methods. In this work, the Adaptive Pressure Profile (APP) method is introduced to address such sparsity concerns. This method is data driven and does not heavily rely on prior information about the flow regime or engine model. Instead, the \mname method uses real-time pressure measurements from a small number of transducers to adaptively learn the isolator pressure profile. This adaptively-learned profile is fit to the pressure data at each time instance to estimate STLE location. The \mname method produces accurate estimates even when (1) the STLE location is not bounded by two or more transducers or (2) when the STLE location is between two transducers that are situated several duct heights apart. Data from two direct-connect isolator models are used to evaluate the accuracy of the \mname method and demonstrate its robustness for different back-pressure scenarios and transducer configurations.

Robin L Hunt↗

NASA NTRSDate not supplied

Adaptive Pressure Profile Method to Locate the Isolator Shock Train Leading Edge Given Limited Pressure Information

To maximize the performance of high-speed air-breathing engines, such as dual-mode scramjets, the streamwise location of the shock train leading edge (STLE) is ideally placed as far upstream in the isolator as possible while avoiding engine unstart. Thus, it is of interest to quantify and control the STLE location as the vehicle travels along its flight trajectory. The STLE location is typically quantified using wall static pressure measurements but there are often restrictions on the number and placement of transducers, thus reducing the accuracy and overall capability of STLE detection methods. In this work, the Adaptive Pressure Profile (APP) method is introduced to address such sparsity concerns. This method is data driven and does not heavily rely on prior information about the flow regime or engine model. Instead, the \mname method uses real-time pressure measurements from a small number of transducers to adaptively learn the isolator pressure profile. This adaptively-learned profile is fit to the pressure data at each time instance to estimate STLE location. The \mname method produces accurate estimates even when (1) the STLE location is not bounded by two or more transducers or (2) when the STLE location is between two transducers that are situated several duct heights apart. Data from two direct-connect isolator models are used to evaluate the accuracy of the \mname method and demonstrate its robustness for different back-pressure scenarios and transducer configurations.

Robin Hunt↗

NASA NTRSDate not supplied

NASA’s Orbital Debris Optical Program: ES-MCAT Nearing Full Operational Capability (FOC)

The NASA JAO/ES-MCAT (Eugene Stansbery Meter Class Autonomous Telescope) Facility is nearing Full Operational Capability, or FOC. ES-MCAT is now fully capable of autonomously running all observations, including: (a) monitoring weather and closing when conditions are not safe, as well as halting observations when conditions are not suitable (e.g. too cloudy) for operations, (b) start-up/shut-down nightly tasking, (c) collecting calibration data and survey or TLE-tracked data, and (d) processing all collected data, including on-chip photometry and astrometry calibrations using the GAIA star catalogue. The processed data are then further analyzed at NASA Johnson Space Center to correlate detections with known objects in the Space Surveillance Network (SSN) catalogue. MCAT can collect data of specific objects with known orbits or can search for objects with orbits similar to those of spacecraft or rocket bodies that have recently broken up. However, the primary goal for ES-MCAT is to survey the geosynchronous (GEO) belt to provide a statistical sample of the GEO debris environment for both engineering models for spacecraft designers and long-term environment evolutionary purposes. The approach for sweeping the sky to statistically survey GEO has been investigated and updated from past surveys taken by NASA and will be reported, herein referred to as the Candy Cane method. ES-MCAT’s optical performance and the limiting magnitude for the full optical system will be discussed. An analysis used to determine which filter to use for GEO surveys (SDSS r′) includes combining the reflectivity of the primary and secondary mirrors, transmission of the field corrector and CCD window, and the quantum efficiency of the CCD detector, resulting in throughput of the full optical path. This throughput is then combined with the expected typical transparency of the atmosphere at ES-MCAT’s altitude/location for the Sloan Digital Sky Survey (SDSS) g′r′i′z′ and Johnson/Kron-Cousins BVRI filters to yield expected relative throughput.

S. M. Lederer↗

NASA NTRS1996

Cassini Star Tracking and Identification Algorithms, Scene Simulation, and Testing

The Cassini mission will use autonomous star identification for initial attitude determination and a star tracking function for maintaining attitude. Because of the complexity of the StarID software, special software simulation tools were created to simulate the Stellar Reference Unit (SRU) output as a function of commands, spacecraft attitude, and star scene, and to allow the introduction of fault conditions. This paper gives the overview of the algorithm design and SRU simulation and a description of the simulation test results and a comparison with field test results obtained using the engineering model SRU.

Cassini↗

NASA NTRS2019

NISAR flight feed assembly measurement campaign

NISAR (NASA ISRO SAR, National Aeronautics and Space Administration, Indian Space Research Organization, Synthetic Aperture Radar) is an Earth science project currently in its final development phase at NASA Jet Propulsion Laboratory (JPL) and at ISRO. Due for launch in 2022, it will assess how our planet changes overtime by measuring differences in the Earth’s solid surface due to factors like climate change, movement and melting of glaciers, earthquakes, land-slides, deforestation, agriculture and others. The enabling instrument for this mission is a dual band radar (L-Band and S-Band) that feeds a 12m deployable mesh reflector. This paper describes the antenna measurement campaign of the L-Band feed array developed at JPL. The SBand feed array is developed by ISRO and is not part of this paper. While Measurements of the Engineering Model have been published before, this paper focuses on the first measurements done with the Flight Model.

Harrell, Jefferson A.↗

NASA NTRS2020

The Mars 2020 lander vision system field test

The Mars 2020 Lander Vision System estimates position relative to a map and provides this information to the spacecraft so that large hazards can be avoided during landing. The LVS is a new mission critical sensor and as such requires extensive validation. A field test conducted in May 2019 was the primary means to prove that the LVS will operate as designed. During this test over 600 independent real-time runs on engineering model LVS hardware and software were executed and clearly showed that it could meet a 40m position estimation requirement over a wide operational envelope. This paper will describe the test approach, operations and results. Specific examples as well as aggregate performance will be discussed along with off-nominal testing and fault recovery.

Montgomery, J.↗

NASA NTRS2017

The Universal Space Transponder: A Next Generation Software Defined Radio

The Universal Space Transponder (UST) is a next generation transponder developed at the Jet Propulsion Laboratory to meet a large variety of telecom, navigation, and radio science needs for future deep-space and near-Earth missions. This paper details the UST software defined radio design and describes how the combination of a modular hardware architecture and in-flight reprogrammability enables a new level of flexibility and expandability for a space transponder. The UST uses common power and digital processing assemblies that can be integrated with a variety of RF modules and is capable of simultaneous, multiband operations with data rates up to 37.5 Mbps RX and 300 Mbps TX. This allows a single radio to support all the direct-to-Earth and relay communication requirements for even complex mission scenarios, reducing the total cost, mass, and power. The discussion includes a description of the current UST engineering models that have been built and tested, as well as details about the next generation capabilities supported by UST, including advanced link coding and modulation, radiometric techniques, and in-radio protocol handling. Details are also presented on RF modules and digital processing in development for radio science and astronomy purposes, including a bistatic radar receiver and broadband planetary emissions receiver. These will demonstrate the ability to integrate low-cost science instruments into the UST architecture, further expanding the versatility of the UST.

Jedrey, Thomas↗

NASA NTRS2017

Venus Aerial Platforms and Engineering and Scientific Modeling Needs

NASA’s Planetary Science Division is performing an assessment of the state of technology in aerial platforms for exploration of Venus. A key factor in the design of aerial platforms is knowledge of the Venus environment. Modeling the Venus environment, which is the subject of this workshop, is needed for the design of robust aerial platforms that can carry out their missions successfully. The purpose of this paper is to enumerate the kinds of models that are important for both engineering and scientific aspects of the design of an aerial platform mission. The first meeting of the NASA Aerial Platforms study team took place from May 30 to June 2, 2017 and defined the science that can be performed by aerial platforms. A second study meeting is planned for late November 2017. This paper focuses on the current status.

Thompson, T. W.↗

NASA NTRS2021

Locating the Isolator Shock-Train Leading Edge with Limited Pressure Information

Real-time detection and control of the isolator shock-train leading edge (STLE) is important to the performance of high-speed air-breathing engines, such as dual-mode scramjets. Typically, the STLE location is determined using wall static-pressure measurements, but there are often restrictions on the placement and overall number of the pressure transducers, reducing the viability and accuracy of such approaches. To address these issues, we introduce the adaptive pressure profile (APP) method for estimating the STLE location. This method does not require extensive prior characterization of the isolator or engine model. Instead, it uses real-time pressure measurements from a small number of transducers to adaptively learn the isolator pressure profile and subsequently uses this deduced profile to estimate the STLE location in a data-driven manner. The APP method works well in situations with sparse transducer placement. It produces accurate estimates when the STLE location is 1) not bounded by two or more transducers or 2) between two transducers that are several isolator duct heights apart. We demonstrate the efficacy of the APP method using simulations and experimental data from direct-connect isolator models. This validation shows that the APP method is accurate and robust for different flow regimes, transducer configurations, and model geometries.

Gregory J. Hunt↗

NASA NTRS2019

Late-time observations of the extraordinary Type II supernova iPTF14hls

Aims. We study iPTF14hls, a luminous and extraordinary long-lived Type II supernova, which lately has attracted much attention and disparate interpretation. Methods. We have presented new optical photometry that extends the light curves up to more than three years past discovery. We also obtained optical spectroscopy over this period, and furthermore present additional space-based observations using Swift and HST. Results. After an almost constant luminosity for hundreds of days, the later light curve of iPTF14hls finally fades and then displays a dramatic drop after about 1000 d, but the supernova is still visible at the latest epochs presented. The spectra have finally turned nebular, and our very last optical spectrum likely displays signatures from the deep and dense interior of the explosion. A high-resolution HST image highlights the complex environment of the explosion in this low-luminosity galaxy. Conclusions. We provide a large number of additional late-time observations of iPTF14hls, which are (and will continue to be) used to assess the many different interpretations for this intriguing object. In particular, the very late (+1000 d) steep decline of the optical light curve is difficult to reconcile with the proposed central engine models. The lack of very strong X-ray emission, and the emergence of intermediate-width emission lines including [S II] that we propose originate from dense, processed material in the core of the supernova ejecta, are also key observational tests for both existing and future models.

J. Sollerman↗

NASA NTRSDate not supplied

Lessons Learned from SMAP Radiometer Pre-/Post-launch Calibration

The Soil Moisture Active Passive(SMAP) mission was launched on 31stJanuary 2015 in a 6 AM/ 6 PM sun-synchronous orbit at 685 km altitude to measure soil moisture and free/thaw globally [1]. The passive instrument of SMAP is a fully polarimetric L-band radiometer (1.4GHz) operating with a bandwidth of 24MHz. The radiometer uses a combination of noise-diodes and Dicke-loads for internal calibration with a design similar to that used by the Aquarius or Jason series radiometers[2,3].Pre-launch calibration activities had been performed since 2012on the engineering model of the radiometer. Post-launch calibration activities have been performed to fine-tune and validate the results from the pre-launch calibration. The major calibration activities and lessons learned in the past 8 years will be described in the following sections.

Jinzheng Peng↗

NASA NTRSDate not supplied

Review of Controllers for Low-Power Free-Piston Stirling Convertors

In this paper, a review of various controller approaches for free-piston Stirling convertors (FPSCs) for low-power radioisotope power systems (RPS) is conducted to compare their performances in terms of critical metrics and provide an insight for designing better controllers for future flight projects. Design variables and general analysis methods for the controllers are described and the controllers are classified into different categories based on important design variables, followed by discussions on the operating principles and properties of various controller approaches in each classification category. Moreover, key features of the state-of-the-art controller approaches are summarized whose designs are hypothetically extended to flight designs to compare their critical metrics such as the estimated size, weight, and power with cost (SWaP-C) and reliability. Finally, design suggestions are made to improve certain metrics for future flight development projects. Along with maturation of free-piston Stirling convertor technologies for radioisotope power systems over the last three decades, various types of controllers have been proposed, among which a couple of them were developed to the Engineering Model (EM) for the Advanced Stirling Radioisotope Generator (ASRG) flight development project. Further improvements of the controllers have been made recently at NASA GRC and the improvements will continue for future flight development projects.

Free-Piston Stirling Convertor Controller↗

NASA NTRSDate not supplied

Review of Controllers for Low-Power Free-Piston Stirling Convertors

In this paper, a review of various controller approaches for free-piston Stirling convertors (FPSCs) for low-power radioisotope power systems (RPS) is conducted to compare their performances in terms of critical metrics and provide an insight for designing better controllers for future flight projects. Design variables and general analysis methods for the controllers are described and the controllers are classified into different categories based on important design variables, followed by discussions on the operating principles and properties of various controller approaches in each classification category. Moreover, key features of the state-of-the-art controller approaches are summarized whose designs are hypothetically extended to flight designs to compare their critical metrics such as the estimated size, weight, and power with cost (SWaP-C) and reliability. Finally, design suggestions are made to improve certain metrics for future flight development projects. Along with maturation of free-piston Stirling convertor technologies for radioisotope power systems over the last three decades, various types of controllers have been proposed, among which a couple of them were developed to the Engineering Model (EM) for the Advanced Stirling Radioisotope Generator (ASRG) flight development project. Further improvements of the controllers have been made recently at NASA GRC and the improvements will continue for future flight development projects.

Free-Piston Stirling Convertor Controller↗

NASA NTRSDate not supplied

Precision Landing Performance of a Human-Scale Lunar Lander Using a Generalized Simulation Framework

NASA has established goals of returning humans to Moon with an initial landing by 2024 and a subsequent sustained presence by 2028, which will require technological advances in spacecraft navigation to enable precision landing. The ability to assess the navigation performance of these new and existing technologies is critical to identifying areas of risk reduction and investment. To that end, the Safe and Precise Landing Integrated Capabilities Evolution (SPLICE) project has demonstrated that a detailed six degree-of-freedom integrated performance simulation framework can provide information on and assessment of expected navigation performance. This framework incorporates engineering models of the on-board spacecraft guidance, navigation, and control systems at varying levels of fidelity. Recent advances in the development of this integrated performance simulation permit running these systems “in-the-loop,” rather than assuming perfect knowledge of the spacecraft states. This development, coupled with fast simulation time and modularization of the various system models, enables a wide variety of system trades to be assessed at once. This paper presents a summary of the advances in the SPLICE simulation framework, updates to the spacecraft navigation models, and an application of the framework to characterize the precision landing performance of a human-scale lunar lander. A series of trade studies examining effects of ground state update qualities shows that given all other assumptions, sufficiently accurate Deep Space Network (DSN) measurements can enable safe and precise human-scale Lunar landings.

Spacecraft navigation↗