Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Enabling Function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Low resistance p-type contacts to monolayer WSe2 through chlorinated solvent doping

Tungsten diselenide (WSe 2 ) is a promising p-type semiconductor limited by high contact resistance (R C ) and the lack of a reliable doping strategy. Here, we demonstrate that exposing WSe 2 to chloroform provides simple and stable p-type doping. In monolayer WSe 2 transistors with Pd contacts, chloroform increases the maximum hole current by over 100× (>200 µA/µm), reduces R C to ~ 2.5 kΩ·μm, and retains an on/off ratio of 10 10 at room temperature. These improvements persist for over 8 months, survive a 150 °C thermal anneal, and remain effective down to 10 K, enabling a cryogenic R C of ~ 1 kΩ·μm. Density functional theory indicates that chloroform strongly physisorbs to WSe 2 , inducing hole doping with minimal impact on the electronic states between the valence band and conduction band edges. Auger electron spectroscopy and atomic force microscopy suggest that chloroform intercalates at the WSe 2 interface with the gate oxide, contributing to doping stability and mitigating interfacial dielectric disorder, though further studies are needed to conclusively confirm this mechanism. This robust, scalable approach enables high-yield WSe 2 transistors with good p-type performance.

42 ENGINEERING↗

Tunable-fidelity wave functions for the ab initio description of scattering and reactions

Here, the no-core shell model (NCSM) is an ab initio method that solves the nuclear many-body problem by expanding the many-particle wave function into a (typically) harmonic oscillator basis and minimizing the energy to obtain the expansion coefficients. Extensions of the NCSM, such as its coupling with microscopic-cluster basis states, further allow for an ab initio treatment of light-ion nuclear reactions of interest for both astrophysics and nuclear technology applications. A downside of the method is the exponential scaling of the basis size with increasing number of nucleons and excitation quanta, which limits its applicability to mass A ≲ 16 nuclei, except for variants where the basis is further down-selected via some truncation scheme. We consider a basis selection method for the NCSM that was first introduced in the context of the large-scale shell model and captures the essential degrees of freedom of the nuclear wave function leading to a favorable complexity scaling for calculations and enabling ab initio reaction calculations in sd-shell nuclei. The particle configurations within the NCSM basis are ordered based on their contribution to the first moment of the Hamiltonian matrix that results from the projection onto the many-body basis. The truncation scheme then consists in retaining only the lowest-first-moment configurations, which typically contain only few many-body basis states (Slater determinants). As the energy threshold above which configurations are disregarded is increased, the size of the basis becomes an almost-continuous variable, allowing for tunable fidelity in the obtained wave functions. The resulting wave functions can then be used directly in ab initio reaction calculations. We present calculations for 7 Li and n + 12 C scattering using nucleon-nucleon interactions derived from chiral effective field theory and softened using the similarity renormalization group method. The obtained energy levels invariably demonstrate exponential convergence with the size of the basis, and we find improved convergence in scattering calculations. To demonstrate the possibilities enabled by the approach, we also present a first calculation for the scattering of neutrons from 24 Mg. The method presented in this work appears promising for future studies of nuclei with mass A > 16, opening multiple future research directions impacting both nuclear astrophysics and nuclear technology applications.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Machine learning guided selection of broad-spectrum epitope-specific functional antibodies for "Disease X"

Our project established and demonstrated a transfer learning framework that enables prediction of antibody–antigen interactions across related viruses. The approach focused on three major activities: 1. Conserved region and epitope identification – We compared viral protein structures and sequences to identify shared receptor-binding domains and neutralizing epitope regions across variants and related viruses. These conserved features formed the foundation for discovering broadly functional antibodies. 2. Machine learning model development – We built neural network–based models that integrate epitope features with antibody sequence information. Instead of relying solely on structural or physical properties, the models learned transferable patterns that describe antibody binding potential across different viral families. 3. Transfer learning and validation – Using SARS-CoV-2 and Ebola as source systems, we successfully transferred learned epitope features to predict antibody interactions for SARS CoV-1 and Marburg virus. Iterative cycles of dataset generation, retraining, and evaluation improved generalization and predictive power, ensuring the framework can adapt to new threats.

59 BASIC BIOLOGICAL SCIENCES↗

High Pressure Response of Siliceous Materials

Several siliceous (i.e., materials containing, resembling, relating to or consisting of silica or silicon dioxide) materials were examined in this study conducted by Oak Ridge National Laboratory and sponsored by the US Army TARDEC. Some were glasses (fused silica or fused quartz, Starphire soda lime silicate glass, hydrated Starphire, BOROFLOAT borosilicate glass, an iron-containing soda lime silicate glass, opal (a hydrated silicate glass), ROBAX glass ceramic, and others were single crystal (α-quartz) and polycrystalline (Coesite - a high pressure phase of crystalline quartz) ceramics. Some of these materials are presently used in transparent armor systems or are under consideration for such. The testing of these materials allowed for comparisons of glass types, glass versus glass ceramics, effect of water content, and comparison of amorphous versus crystalline materials of the same composition. The responses of these materials to high pressure loading were studied using spherical indentation testing, diamond anvil cell testing, and laser shock testing. So besides the focus of this study being on the siliceous materials, as much emphasis was placed on the efficacy of these three test methods to exploit high pressure responses. Each test is different and enables the study of different aspects of high pressure response as highlighted below. 1. Spherical indentation, when using small indenter diameters, produces both high pressure and shear, and the loading and unloading histories enabled quantification of apparent yield stress and semi-quantification of energy absorption capability (hysteresis) of the various siliceous materials. 2. Diamond anvil cell testing produces a hydrostatic stress, and when concurrently used with Raman Spectroscopy, enabled the potential identification of changes of state of material as a function of quantified pressure for the various siliceous materials. Permanent densification was also detectable. 3. Laser shock testing produces high pressures but under dynamic conditions (impact event less than 30 ns), so this enabled the study of the effect of rate on high pressure. A previously unobserved damage mechanism was revealed with this testing, and the ease or difficulty of laser-shock-induced damage initiation was deemed to be relatable to the native surface flaw population that exists on these materials.

Wereszczak, Andrew A.↗

The Latent Dirichlet Allocation model applied to airborne LiDAR data: A case study on mapping forest degradation associated with fragmentation and fire in the Amazon region

1. LiDAR data are being increasingly used to provide a detailed characterization of the vertical profile of forests. This characterization enables the generation of new insights on the influence of environmental drivers and anthropogenic disturbances on forest structure as well as on how forest structure influences important ecosystem functions and services. Unfortunately, extracting information from LiDAR data in a way that enables the spatial visualization of forest structure, as well as its temporal changes, is challenging due to the high dimensionality of these data. 2. In this study, we show how the Latent Dirichlet Allocation model applied to LiDAR data (LidarLDA) can be used to identify forest structural types and how the relative abundance of these forest types changes throughout the landscape. The code to fit this model is made available through the open-source r package LidarLDA in github. We illustrate the use of LidarLDA both with simulated data and data from a large-scale fire experiment in the Brazilian Amazon region. 3. Using simulated data, we demonstrate that LidarLDA accurately identifies the number of forest types as well as their spatial distribution and absorptance probabilities. For the empirical data, we found that LidarLDA detects both landscape-level patterns in forest structure as well as the strong interacting effect of fire and forest fragmentation on forest structure based on the experimental fire plots. More specifically, LidarLDA reveals that proximity to forest edge exacerbates the impact of fires, and that burned forests remain structurally different from unburned areas for at least 7 years, even when burned only once. Importantly, LidarLDA generates insights on the 3D structure of forest that cannot be obtained using more standard approaches that just focus on top-of-the-canopy information (e.g. canopy height models based on LiDAR data). 4. By enabling the mapping of forest structure and its temporal changes, we believe that LidarLDA will be of broad utility to the ecological research community.

54 ENVIRONMENTAL SCIENCES↗

Direct simulation Monte Carlo modeling of relaxation processes in polyatomic gases

Relaxation processes of polyatomic molecules are modeled and implemented in an in-house Direct Simulation Monte Carlo code in order to enable the simulation of atmospheric entry maneuvers at Mars and Saturn’s Titan. The description of rotational and vibrational relaxation processes is derived from basic quantum-mechanics using a rigid rotator and a simple harmonic oscillator, respectively. Strategies regarding the vibrational relaxation process are investigated, where good agreement for the relaxation time according to the Landau-Teller expression is found for both methods, the established prohibiting double relaxation method and the new proposed multi-mode relaxation. Differences and applications areas of these two methods are discussed. Consequently, two numerical methods used for sampling of energy values from multi-dimensional distribution functions are compared. The proposed random-walk Metropolis algorithm enables the efficient treatment of multiple vibrational modes within a time step with reasonable computational effort. The implemented model is verified and validated by means of simple reservoir simulations and the comparison to experimental measurements of a hypersonic, carbon-dioxide flow around a flat-faced cylinder.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Autonomous alignment and healing in multilayer soft electronics using immiscible dynamic polymers

Self-healing soft electronic and robotic devices can, like human skin, recover autonomously from damage. While current devices use a single type of dynamic polymer for all functional layers to ensure strong interlayer adhesion, this approach requires manual layer alignment. In this study, we used two dynamic polymers, which have immiscible backbones but identical dynamic bonds, to maintain interlayer adhesion while enabling autonomous realignment during healing. These dynamic polymers exhibit a weakly interpenetrating and adhesive interface, whose width is tunable. When multilayered polymer films are misaligned after damage, these structures autonomously realign during healing to minimize interfacial free energy. Finally, we fabricated devices with conductive, dielectric, and magnetic particles that functionally heal after damage, enabling thin-film pressure sensors, magnetically assembled soft robots, and underwater circuit assembly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Towards 3D printed multifunctional immobilization for proton therapy: Initial materials characterization

Purpose: 3D printing technology is investigated for the purpose of patient immobilization during proton therapy. It potentially enables a merge of patient immobilization, bolus range shifting, and other functions into one single patient-specific structure. In this first step, a set of 3D printed materials is characterized in detail, in terms of structural and radiological properties, elemental composition, directional dependence, and structural changes induced by radiation damage. These data will serve as inputs for the design of 3D printed immobilization structure prototypes. Methods: Using four different 3D printing techniques, in total eight materials were subjected to testing. Samples with a nominal dimension of 20 × 20 × 80 mm{sup 3} were 3D printed. The geometrical printing accuracy of each test sample was measured with a dial gage. To assess the mechanical response of the samples, standardized compression tests were performed to determine the Young’s modulus. To investigate the effect of radiation on the mechanical response, the mechanical tests were performed both prior and after the administration of clinically relevant dose levels (70 Gy), multiplied with a safety factor of 1.4. Dual energy computed tomography (DECT) methods were used to calculate the relative electron density to water ρ{sub e}, the effective atomic number Z{sub eff}, and the proton stopping power ratio (SPR) to water SPR. In order to validate the DECT based calculation of radiological properties, beam measurements were performed on the 3D printed samples as well. Photon irradiations were performed to measure the photon linear attenuation coefficients, while proton irradiations were performed to measure the proton range shift of the samples. The directional dependence of these properties was investigated by performing the irradiations for different orientations of the samples. Results: The printed test objects showed reduced geometric printing accuracy for 2 materials (deviation > 0.25 mm). Compression tests yielded Young’s moduli ranging from 0.6 to 2940 MPa. No deterioration in the mechanical response was observed after exposure of the samples to 100 Gy in a therapeutic MV photon beam. The DECT-based characterization yielded Z{sub eff} ranging from 5.91 to 10.43. The SPR and ρ{sub e} both ranged from 0.6 to 1.22. The measured photon attenuation coefficients at clinical energies scaled linearly with ρ{sub e}. Good agreement was seen between the DECT estimated SPR and the measured range shift, except for the higher Z{sub eff}. As opposed to the photon attenuation, the proton range shifting appeared to be printing orientation dependent for certain materials. Conclusions: In this study, the first step toward 3D printed, multifunctional immobilization was performed, by going through a candidate clinical workflow for the first time: from the material printing to DECT characterization with a verification through beam measurements. Besides a proof of concept for beam modification, the mechanical response of printed materials was also investigated to assess their capabilities for positioning functionality. For the studied set of printing techniques and materials, a wide variety of mechanical and radiological properties can be selected from for the intended purpose. Moreover the elaborated hybrid DECT methods aid in performing in-house quality assurance of 3D printed components, as these methods enable the estimation of the radiological properties relevant for use in radiation therapy.

60 APPLIED LIFE SCIENCES↗

New Engineering Concepts to High Energy Density Li-S Batteries

Li-S batteries (LSBs) with energy densities > 500 Wh/kg @ C/5 and >1000 cycles, cycle life operating over wide temperatures has been identified to be critical for meeting the global energy demands. Progress is however, very much limited due to several major hurdles related to the following: (a) poor Li' reaction kinetics (conductivity/diffusivity) enabling full reversible S conversion to Li2S, (b) inferior electron (e) conductivity, specific capacity and cycle life due to electrolyte soluble species of polysulfides (PSs) formed with the reaction of Li ions with sulfur migrating to anode, (c) unstable solid electrolyte interphase (SEI) formation and finally, (d) dendrites that are formed on the Li metal anode severely limiting the cycle life due to polarization at the solid/liquid interfaces causing safety, inferior capacity, energy density, rate, and cycle life issues. Creation of a fully functional economical ≤$80/kWh, high energy density LSBs is vital for enabling its widespread commercial deployment and use in current and next generation electric vehicles.

25 ENERGY STORAGE↗

Blood Peptidome-Degradome Profile of Breast Cancer

We report on the degradomic-peptidomic insights into blood plasma of early-stage breast cancer patients. The plasmin-α 2 -antiplasmin and thrombin-antithrombin systems are observed to be changed in early stage breast cancer through the selective degradation of their functional domains. The extracellular matrix (ECM) protection protein complexes are destroyed, but the ECM itself is not massively degraded. Key innate immune system components and cancer inhibitor and suppressor substrates are differentially degraded. The degradomic-peptidomic analysis provides information on the selectivity and extent of substrate and functional domain degradation and the specificity of substrate cleavages, potentially enabling discovery of diagnostic and therapeutic targets for early-stage breast cancer.

59 BASIC BIOLOGICAL SCIENCES↗

Electronic structure prediction of multi-million atom systems through uncertainty quantification enabled transfer learning

The ground state electron density — obtainable using Kohn-Sham Density Functional Theory (KS-DFT) simulations — contains a wealth of material information, making its prediction via machine learning (ML) models attractive. However, the computational expense of KS-DFT scales cubically with system size which tends to stymie training data generation, making it difficult to develop quantifiably accurate ML models that are applicable across many scales and system configurations. Here, we address this fundamental challenge by employing transfer learning to leverage the multi-scale nature of the training data, while comprehensively sampling system configurations using thermalization. Our ML models are less reliant on heuristics, and being based on Bayesian neural networks, enable uncertainty quantification. We show that our models incur significantly lower data generation costs while allowing confident — and when verifiable, accurate — predictions for a wide variety of bulk systems well beyond training, including systems with defects, different alloy compositions, and at multi-million-atom scales. Moreover, such predictions can be carried out using only modest computational resources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Machine‐Learning‐Driven Exploration of Surface Reconstructions of Reduced Rutile TiO 2

Abstract Titanium dioxide (TiO 2 ) is widely used as a catalyst support due to its stability, tunable electronic properties, and surface oxygen vacancies, which are crucial for catalytic processes such as the reverse water‐gas shift (RWGS) reaction. Reduced TiO 2 surfaces undergo complex surface reconstructions that endow unique properties but are computationally challenging to describe. In this study, we utilize machine‐learning interatomic potentials (MLIPs) integrated with an active‐learning workflow to efficiently explore reduced rutile TiO 2 surfaces. This approach enabled the prediction of a phase diagram as a function of oxygen chemical potential, revealing a variety of reconstructed phases, including a previously unreported subsurface shear plane structure. We further investigate the electronic properties of these surfaces and validate our results by comparing experimental and theoretical high‐resolution transmission electron microscopy (HRTEM). Our findings provide new insights into how extreme surface reductions influence the structural and electronic properties of TiO 2 , with potential implications for catalyst design.

Lee, Yonghyuk [Chemistry and Biochemistry Universi↗

Machine‐Learning‐Driven Exploration of Surface Reconstructions of Reduced Rutile TiO 2

Titanium dioxide (TiO 2 ) is widely used as a catalyst support due to its stability, tunable electronic properties, and surface oxygen vacancies, which are crucial for catalytic processes such as the reverse water-gas shift (RWGS) reaction. Reduced TiO 2 surfaces undergo complex surface reconstructions that endow unique properties but are computationally challenging to describe. In this study, we utilize machine-learning interatomic potentials (MLIPs) integrated with an active-learning workflow to efficiently explore reduced rutile TiO 2 surfaces. This approach enabled the prediction of a phase diagram as a function of oxygen chemical potential, revealing a variety of reconstructed phases, including a previously unreported subsurface shear plane structure. We further investigate the electronic properties of these surfaces and validate our results by comparing experimental and theoretical high-resolution transmission electron microscopy (HRTEM). Our findings provide new insights into how extreme surface reductions influence the structural and electronic properties of TiO 2 , with potential implications for catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Efficient Post-Polymerization Modification of Poly(Styrene- co -Maleic Anhydride) for Thermally Reversible Nanocomposites

A copolymer of maleic anhydride and styrene is functionalized with Diels–Alder (DA) capable pendant groups to enable the study of this material with different crosslink densities. This constituent is synthesized using commercially available starting materials and relatively simple and uncomplicated chemistries which open the possibility for its use in large-scale applications. The 10%, 25%, 50%, and 100% DA nominal crosslinking based on available pendant furan groups on the polymeric component is investigated. The reaction kinetics are monitored using infrared spectroscopy and rheology. Based on the rheological results, carbon nanotube (CNT) incorporation into the DA matrix is explored in order to determine its effects on the complex modulus of the material. This work done in this report is meant as a proof of concept for this DA material with the possibility of its incorporation into other commonly used bulk materials and/or adhesives to allow for an easily reversible product formulation.

36 MATERIALS SCIENCE↗

RCSB protein data Bank: Next‐generation advanced search for exploration of experimental structures and computed structure models

Abstract The Protein Data Bank (PDB), established in 1971, is the primary global, open‐access archive for experimentally determined 3D macromolecular structures (proteins, RNA, DNA). The research‐focused RCSB.org web‐portal provides access to these data alongside more than one million machine‐learning‐predicted structure models, greatly expanding the available structural landscape. Rapid growth of both experimental and computational structures has increased the need for powerful yet accessible search tools that serve a broad and diverse scientific community. Herein, we describe a redesigned RCSB Protein Data Bank RCSB.org Advanced Search capability that supports intuitive discovery of 3D structures through a unified interface. This interface integrates annotation‐, sequence‐, and 3D structure‐based searches, embeds an interactive 3D viewer, and incorporates curated biological knowledge, such as catalytic site definitions from Mechanism and Catalytic Site Atlas and ligand‐guided structural motifs, for constructing geometry‐driven queries. A new Chemical Search tool allows definition of chemical queries via an integrated drawing tool or standard identifiers, seamlessly combining them with annotation filters. By allowing query definition directly within spatial and chemical contexts, these search interfaces reduce the need for detailed knowledge of residue numbering, chain identifiers, or external cheminformatics software. This capability enables efficient exploration of structures, chemical diversity, and structure–function relationships across all life domains. The redesigned interfaces can be accessed directly at rcsb.org/search/advanced for Advanced Search and rcsb.org/search/chemical for Chemical Search.

Rose, Yana [Research Collaboratory for Structural ↗

Measurement of inclusive and leading subjet fragmentation in pp and Pb–Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV

This article presents new measurements of the fragmentation properties of jets in both proton–proton (pp) and heavy-ion collisions with the ALICE experiment at the Large Hadron Collider (LHC). We report distributions of the fraction $z_r$ of transverse momentum carried by subjets of radius $r$ within jets of radius $R$. Charged-particle jets are reconstructed at midrapidity using the anti-$k_T$ algorithm with jet radius $R$ = 0.4, and subjets are reconstructed by reclustering the jet constituents using the anti-$k_T$ algorithm with radii $r$ = 0.1 and $r$ = 0.2. In proton–proton collisions, we measure both the inclusive and leading subjet distributions. We compare these measurements to perturbative calculations at next-to-leading logarithmic accuracy, which suggest a large impact of threshold resummation and hadronization effects on the $z_r$ distribution. In heavy-ion collisions, we measure the leading subjet distributions, which allow access to a region of harder jet frag- mentation than has been probed by previous measurements of jet quenching via hadron fragmentation distributions. The $z_r$ distributions enable extraction of the parton-to-subjet fragmentation function and allow for tests of the universality of jet fragmentation functions in the quark–gluon plasma (QGP). We find no significant modification of $z_r$ distributions in Pb–Pb compared to pp collisions. However, the distributions are also consistent with a hardening trend for $z_r$ < 0.95, as predicted by several jet quenching models. As $z_r$ → 1 our results indicate that any such hardening effects cease, exposing qualitatively new possibilities to disentangle competing jet quenching mechanisms. By comparing our results to theoretical calculations based on an independent extraction of the parton-to-jet fragmentation function, we find consistency with the universality of jet fragmentation and no indication of factorization breaking in the QGP.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Carving out OPE space and precise O(2) model critical exponents

We develop new tools for isolating CFTs using the numerical bootstrap. A “cutting surface” algorithm for scanning OPE coefficients makes it possible to find islands in high-dimensional spaces. Together with recent progress in large-scale semidefinite programming, this enables bootstrap studies of much larger systems of correlation functions than was previously practical. We apply these methods to correlation functions of charge-0, 1, and 2 scalars in the 3d O(2) model, computing new precise values for scaling dimensions and OPE coefficients in this theory. Our new determinations of scaling dimensions are consistent with and improve upon existing Monte Carlo simulations, sharpening the existing decades-old 8σ discrepancy between theory and experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Security and Privacy in Cyber-Physical Systems

As you have seen from the previous chapters, cyber-physical systems (CPS) are broadly used across technology and industrial domains. While these systems enable process optimization and efficiency and allow previously impossible functionality, security and privacy are key concerns for their design, development, and operation. CPS have been key components utilized in some of the highest publicized security breaches over the last decade. In this chapter, we will look over the CPS described in the previous chapters from a security perspective. In this chapter, we explain classical information and physical security fundamentals in the context of CPS and contextualize them across application domains. We give examples where the interplay of functionality and diverse communication can introduce unexpected vulnerabilities and produce larger impacts. We will discuss how CPS security and privacy is inherently different from that of pure cyber or physical systems and what may be done to secure these systems, considering their emergent cyber-physical properties. Finally, we will discuss security and privacy implications of merging infrastructural and personal CPS. Our hope is to impart the knowledge of what CPS security and privacy are, why they are important, and explain existing processes and challenges.

Cyber-physical systems↗